Issue of AP 3600

Is there anyway to get the AP 3600 to work offline? If so can it be supported also by the 802.11ac module?

Seth

You can convert it to a standalone, but the module AC and or any other module will not work because it is not supported in stand-alone.

Sent by Cisco Support technique iPhone App

Tags: Cisco Wireless

Similar Questions

HP Compaq 8710w and drivers Windows 8.1 for Quadro FX 3600 M

Hi everyone I have a HP Compaq 8710w and it works very well so far.

There is a problem experienced with Quadro FX 3600 M drivers in Windows 7 If you do not use the old drivers given the HP (186,24) but other than that, everything is ok.

https://forums.GeForce.com/default/topic/516145/legacy/Quadro-FX-3600m-problems/

/ t5/Notebook-HP-ProBook-ZBook/8710w-Win7-random-freezing-black-screens/td-p/2337373#. VFdIW_msWfw

I want to improve my current Windows 7 Ultimate for Windows 8.1 but I can't find the official drivers from HP and I'm afraid that the blue screens of death will be back.

Is it possible to give official drivers for the Quadro FX 3600 M of this laptop great for Windows 8.1 because it is a known problem that all the other drivers do not work properly.

Thanks in advance

George

P.S. This thread was moved from the company - Compaq, Elite, Pro for laptop - PC HP ProBook, EliteBook, ZBook, slate/Tablet PC, Armada, Compaq LTE. -HP moderator of the Forum

As for the help of all the other drivers, there is an option that works for me. If you must use a driver newest to work with Win8.1 (I have) there is a solution, but the will of costs over the life of the battery!

I had been using latest drivers for my 8710w fx3600m rigging using this method and I hope that it is a possible solution for you as well:

Download a newer driver for the fx3600m for Win8.1 and it's a good idea to film for WHQL drivers.

I am currently using the 334.95 driver (334.95-quadro-notebook-win8-win7-64bit-international-whql.exe).

DO NOT install the drivers right away.

Download"Powermizer Switch.exe" here - http://www.box.net/shared/v7jpoateoq

Powermizer Switch.exe extract on your desktop for quick access. You will need to be easily accessible.

It may be a good idea to make sure you're clean of any other video drivers Nvidia beforehand.

Now, we are ready to install the driver.

IMPORTANT! When you install the driver, only select the driver and nothing else and don't forget to restart immediately!

Once on the Windows desktop, start immediately 'Powermizer Switch.exe', click on 'Powermizer Off' and YES to restart!

This will allow all pilots before the xx 192.le and eliminate the blackscreen/blue screen issue.

NOTE: any time you pass or update the drivers (former 192.xx), you will need to use this scheme every time!

HP Deskjet 3600 series. Initializing ink cartridges? More than 3 partners? s

Hello:

I was recently offered a printer HP deskjet 3620 or 3650. I have only the manual for it to 3600 series moment.

There are 27, 28 & 58 ink cartridges.

My questions are:

1} require initialization of ink as many HP printers do or can I use regular cartridges. The original inks disappeared somewhere in transit.

2} If initializing cartridges are required are they still available?

3} it is my understanding that this printer has never been created or had it ink.

y at - there a way to tell if this is true? There is now no cartridge inside and it appears unblemished, even if all the original packaging has been removed.

4} am I correct to assume that if the ink cartridges installed previously to a point that this printer is useless that the print heads are probably blocked.?

Please notify.

I saw this place is around the same time that your other post. If you just want to know about the initial optimization process of your printer for the best performance? To install ink cartridges are available and are used to prepare the print head, but are not absolutely necessary. You don't have to contact HP for Setup ink cartridges for him. You can call technical support at 1-800-474-6836 (US) or follow this link to get the phone number for your country and ask them to order it. Or call 1-888-999-4747 HP Home and Home Office, but I don't know if you can get them at the store. Just as a previous tech support agent I know I could order setup of ink cartridges.

A lack of alignment can occur if you do not use the first time ink installation cartridges, but I doubt it. There is no way of knowing if she has never had ink in it before without having already inked and install on the computer in order to access the Toolbox and then choosing to print a test page that may have this information on it. On newer models,'s called it a Printer Status Report. It will tell you all about his prior use.

I don't think the printer hangs another ink in there if there is no ink installation cartridges installed the first time. I don't know the refilled ink cartridges may damage the print head, but I think that you will be sure to use regular ink you'll be safer if you call, your printer is in or out of warranty.

Here is a nice little document all about these issues and much more. I hope this helps!

Issue of ASA L2TP VPN error QM WSF

Hello guys

Facing the issue with new support for .do L2tp connection on this you can

L2TP is terminiated on ASA and ASA before there is a router where ASA outside interface is coordinated to the public IP address

Here is the config and the logs.earlier of debugging that she was unknown to the Group and now tunnel is not eslablshitng to my machine via l2tp

ASA 5,0000 Version 59

access-list acl - scope ip allowed any one
acl_outside list extended access permitted ip object-group HQ ABC object-group
acl_outside list extended access permit tcp any host 10.10.20.10 eq 5269
inside_nat0 list extended access permitted ip object-group ABC object-group HQ
inside_nat0 list of allowed ip extended access all 10.1.252.0 255.255.255.0
DefaultRAGroup_splitTunnelAcl list standard access allowed 10.0.0.0 255.0.0.0

IP local pool vpngroup 10.1.252.1 - 10.1.252.253 mask 255.255.255.0

Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0
NAT (inside) 1 0.0.0.0 0.0.0.0

Crypto ipsec transform-set esp-3des esp-sha-hmac trans

Crypto-map Dynamics dyno 10 transform-set ESP-3DES-MD5-TRANS trans
card crypto 65535-isakmp ipsec vpn Dynamics dyno
vpn outside crypto map interface
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
lifetime 28800
Crypto isakmp nat-traversal 3600

internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
value of 10.1.16.11 DNS server 10.1.16.13
VPN-idle-timeout no
VPN-session-timeout no
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
by default-field valuexyz.com
Split-dns value xyz.com
enable dhcp Intercept 255.255.0.0
the authentication of the user activation
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec

password cisco KCtylQW4545gfddN6mbi93ijmA user name is nt encrypted
attributes username cisco
Protocol-tunnel-VPN l2tp ipsec
type of remote access service
IPSec-attributes tunnel-group DefaultL2LGroup
pre-shared key *.
attributes global-tunnel-group DefaultRAGroup
vpngroup address pool
Group Policy - by default-DefaultRAGroup
management of the password password-expire-to-days 30
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
tunnel-group DefaultRAGroup ppp-attributes
ms-chap-v2 authentication

===========================

Debug logs:

EQ-INTFW01 # Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: HDR + SA (1) +.
SELLER (13) of the SELLER (13) of the SELLER (13) + the SELLER (13) + the SELLER (13) + the SELLER (13) + the SELLER (13) ++ NONE (0) overall length: 38
4
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, SA payload processing
Apr 04 14:59:36 [IKEv1]: failure of Phase 1: incompatibility of the types of attributes of class Group Description: RRs would be: unknown Cfg would have: Gr
our p
Apr 04 14:59:36 [IKEv1]: failure of Phase 1: incompatibility of the types of attributes of class Group Description: RRs would be: unknown Cfg would have: Gr
our p
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, Oakley proposal is acceptable
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, payload processing VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, payload processing VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, received NAT - Traversal RFC VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, payload processing VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, received NAT-Traversal worm 02 VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, payload processing VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, received Fragmentation VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, payload processing VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, payload processing VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, payload processing VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, IKE SA payload processing
Apr 04 14:59:36 [IKEv1]: failure of Phase 1: incompatibility of the types of attributes of class Group Description: RRs would be: unknown Cfg would have: Gr
our p
Apr 04 14:59:36 [IKEv1]: failure of Phase 1: incompatibility of the types of attributes of class Group Description: RRs would be: unknown Cfg would have: Gr
OUP 2
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, IKE SA proposal # 1, transform # 5 acceptable entry Matches overall IKE #.
1
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, build the payloads of ISAKMP security
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, constructing the payload of NAT-Traversal VID worm RFC
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, construction of Fragmentation VID + load useful functionality
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR + HER (1), SELLER (13)
NONE (0) + SELLER (13) overall length: 124
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: HDR + KE (4), NUNCIO (10)
NAT - D (20) + NAT - D (20), NONE (0) overall length: 260
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, processing ke payload
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, payload processing ISA_KE
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, nonce payload processing
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, payload NAT-discovery of treatment
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, calculation of hash discovered NAT
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, payload NAT-discovery of treatment
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, calculation of hash discovered NAT
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, building ke payload
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, building nonce payload
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, build payloads of Cisco Unity VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, constructing payload V6 VID xauth
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, Send IOS VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, ASA usurpation IOS Vendor ID payload construction (version: 1.0.0 capabilit)
IES: 20000001)
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, build payloads VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, Send Altiga/Cisco VPN3000/Cisco ASA GW VID
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, NAT-discovery payload construction
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, calculation of hash discovered NAT
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, NAT-discovery payload construction
Apr 04 14:59:36 [IKEv1 DEBUG]: IP = 195.229.90.21, calculation of hash discovered NAT
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, connection landed on tunnel_group DefaultRAGroup
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, Generating keys for answering machine...
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR + KE (4), NUNCIO (10) +.
SELLER of the SELLER the SELLER (13) (13) (13) of the SELLER (13) + NAT - D (20) + NAT - D (20) ++ (0) NONE total length: 304
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: HDR + ID (5) + HASH (8) +.
NONE (0) overall length: 64
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:36 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
10.1.100.79
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, calculation of hash for ISAKMP
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, status of automatic NAT detection: remote endpoint IS be
Hind a NAT device this end is behind a NAT device
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, connection landed on tunnel_group DefaultRAGroup
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, construction of payload ID
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, build payloads of hash
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, calculation of hash for ISAKMP
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, building dpd vid payload
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR, ID (5) + HASH (8) + V
ENDOR (13) + (0) NONE total length: 84
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, PHASE 1 COMPLETED
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, for this connection Keep-alive type: None
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, Keep-alives configured on, but the peer does not support persistent (type = None)
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, timer to generate a new key to start P1: 21600 seconds.
Apr 04 14:59:36 [IKEv1 DECODER]: IP = 195.229.90.21, IKE Responder starting QM: id msg = 00000001
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 1) with payloads: HDR + HASH (8) + HER (1) +.
ID (5) + ID (5) + NAT - OA (21) + NAT - OA (21), NUNCIO (10) + (0) NONE total length: 324
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, SA payload processing
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, nonce payload processing
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:36 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
10.1.100.79
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID remote Proxy Host: address
10.1.100.79, Protocol 17 Port 1701
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:36 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
185.78.161.254
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID local Proxy Host: address 1
85.78.161.254, Protocol 17 Port 1701
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, detected L2TP/IPSec session.
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, QM IsRekeyed its not found old addr
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, static check card Crypto, card dyno, seq = 10 is a success
FUL game
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, Selecting one-encapsulated-Tunnel UDP and UDP - en
pre-measured-Transport modes defined by NAT-Traversal
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, remote peer IKE configured crypto card: dyno
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, ITS processing IPSec payload
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IPSec SA proposal # 2, transform # 1 acceptable M
global security association entry IPSec matches # 10
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE: asking SPI!
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE got SPI engine key: SPI = 0x321170a2
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, quick mode of oakley constucting
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, empty building hash payload
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, building the IPSec Security Association Management
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, construction of support useful Nuncio IPSec
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, constructing the ID of the proxy
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, transmission Proxy Id:
Remote host: 195.229.90.21 Protocol Port 17 0
Local host: 10.10.20.2 Protocol 17 Port 1701
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, construction of payload NAT Original address
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, construction of payload NAT Original address
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address sending NAT-Traversal
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, build payloads of hash qm
Apr 04 14:59:36 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE Responder sending 2nd QM pkt: id msg = 000000
01
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, IKE_DECODE SEND Message (msgid = 1) with payloads: HDR, HASH (8), HIS (1) + N
A TIMES (10) + ID (5) + ID (5) + NAT - OA (21) + NAT - OA (21) + (0) NONE total length: 184
Apr 04 14:59:36 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 1) with payloads: HDR + HASH (8) + NO (0)
total length: 52
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, loading all IPSEC security associations
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, generate Quick Mode key!
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, NP encrypt rule looking for dyno carpet 10 crypto card
Ching unknown ACL: returned cs_id = ccf1ac00; rule = 00000000
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, generate Quick Mode key!
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, NP encrypt rule looking for dyno carpet 10 crypto card
Ching unknown ACL: returned cs_id = ccf1ac00; rule = 00000000
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, security full negotiation for user (Responder), in
related SPI, 0x321170a2, SPI = out = 0x8349be0f
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE got a msg KEY_ADD for SA: SPI = 0x8349be0f
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, pitcher: received KEY_UPDATE, spi 0x321170a2
Apr 04 14:59:36 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, timer to generate a new key to start P2: 3060 seconds.
Apr 04 14:59:36 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, PHASE 2 COMPLETED (msgid = 00000001)
Apr 04 14:59:36 [IKEv1]: rules of classification IKEQM_Active() Add L2TP: ip <195.229.90.21>mask <0xFFFFFFFF>port<4500>
Apr 04 14:59:38 [IKEv1 DECODER]: IP = 195.229.90.21, IKE Responder starting QM: id msg = 00000002
Apr 04 14:59:38 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 2) with payloads: HDR + HASH (8) + HER (1) +.
ID (5) + ID (5) + NAT - OA (21) + NAT - OA (21), NUNCIO (10) + (0) NONE total length: 324
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, SA payload processing
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, nonce payload processing
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:38 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
10.1.100.79
Apr 04 14:59:38 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID remote Proxy Host: address
195.229.90.21, Protocol 17, Port 0
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:38 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
185.78.161.254
Apr 04 14:59:38 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID local Proxy Host: address 1
0.10.20.2, Protocol 17 Port 1701
Apr 04 14:59:38 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, detected L2TP/IPSec session.
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:38 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, static check card Crypto, card dyno, seq = 10 is a success
FUL game
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, Selecting one-encapsulated-Tunnel UDP and UDP - en
pre-measured-Transport modes defined by NAT-Traversal
Apr 04 14:59:38 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, remote peer IKE configured crypto card: dyno
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, ITS processing IPSec payload
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IPSec SA proposal # 2, transform # 1 acceptable M
global security association entry IPSec matches # 10
Apr 04 14:59:38 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE: asking SPI!
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, the delete unit Active process event generate a new key for outdoors
peer 195.229.90.21.

Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE got SPI engine key: SPI = 0xc9c523ea
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, quick mode of oakley constucting
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, empty building hash payload
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, building the IPSec Security Association Management
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, construction of support useful Nuncio IPSec
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, constructing the ID of the proxy
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, transmission Proxy Id:
Remote host: 195.229.90.21 Protocol Port 17 0
Local host: 10.10.20.2 Protocol 17 Port 1701
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, construction of payload NAT Original address
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, construction of payload NAT Original address
Apr 04 14:59:38 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address sending NAT-Traversal
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, build payloads of hash qm
Apr 04 14:59:38 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE Responder sending 2nd QM pkt: id msg = 000000
02
Apr 04 14:59:38 [IKEv1]: IP = 195.229.90.21, IKE_DECODE SEND Message (msgid = 2) with payloads: HDR, HASH (8), SA (1) + N
A TIMES (10) + ID (5) + ID (5) + NAT - OA (21) + NAT - OA (21) + (0) NONE total length: 184
Apr 04 14:59:38 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 2) with payloads: HDR + HASH (8) + NO (0)
total length: 52
Apr 04 14:59:38 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = b0e14739) with payloads: HDR + HASH (8), OF
LETE (12) + (0) NONE total length: 68
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, removal of treatment
Apr 04 14:59:38 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE Received delete to resultants to reappear homologous IKE: 195,22
9.90.21, reappear addr: cd4874a0, msgid: 0x00000001
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, L2TP/IPSec: ignoring delete for a sentry (rekeyed m
SGID = 1)
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, loading all IPSEC security associations
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, generate Quick Mode key!
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, NP encrypt rule looking for dyno carpet 10 crypto card
Ching unknown ACL: returned cs_id = ccf1ac00; rule = 00000000
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, generate Quick Mode key!
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, NP encrypt rule looking for dyno carpet 10 crypto card
Ching unknown ACL: returned cs_id = ccf1ac00; rule = 00000000
Apr 04 14:59:38 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, security full negotiation for user (Responder), in
related SPI, 0xc9c523ea, SPI = out = 0x619b7d3a
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE got a msg KEY_ADD for SA: SPI = 0x619b7d3a
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, pitcher: received KEY_UPDATE, spi 0xc9c523ea
Apr 04 14:59:38 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, timer to generate a new key to start P2: 3060 seconds.
Apr 04 14:59:38 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, PHASE 2 COMPLETED (msgid = 00000002)
Apr 04 14:59:39 [IKEv1 DECODER]: IP = 195.229.90.21, IKE Responder starting QM: id msg = 00000003
Apr 04 14:59:39 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 3) with payloads: HDR + HASH (8) + HER (1) +.
ID (5) + ID (5) + NAT - OA (21) + NAT - OA (21), NUNCIO (10) + (0) NONE total length: 324
Apr 04 14:59:39 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:39 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, SA payload processing
Apr 04 14:59:39 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, nonce payload processing
Apr 04 14:59:39 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:39 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
10.1.100.79
Apr 04 14:59:39 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID remote Proxy Host: address
195.229.90.21, Protocol 17, Port 0
Apr 04 14:59:39 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:39 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
185.78.161.254
Apr 04 14:59:39 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID local Proxy Host: address 1
0.10.20.2, Protocol 17 Port 1701
Apr 04 14:59:39 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, detected L2TP/IPSec session.
Apr 04 14:59:39 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:39 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:39 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, QM IsRekeyed its already be regenerated
Apr 04 14:59:39 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, error QM WSF (P2 struct & 0xcd51dbb8, mess id 0x3)!
Apr 04 14:59:39 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, case of mistaken IKE responder QM WSF (struct & 0xcd51
DBB8) , : QM_DONE, EV_ERROR--> QM_BLD_MSG2, EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MS
G--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH--> QM_BLD_MSG2, EV_VALIDATE_MSG
Apr 04 14:59:39 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
Apr 04 14:59:39 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, peer table correlator Removing failed, no match!
Apr 04 14:59:41 [IKEv1 DECODER]: IP = 195.229.90.21, IKE Responder starting QM: id msg = 00000003
Apr 04 14:59:41 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 3) with payloads: HDR + HASH (8) + HER (1) +.
ID (5) + ID (5) + NAT - OA (21) + NAT - OA (21), NUNCIO (10) + (0) NONE total length: 324
Apr 04 14:59:41 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:41 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, SA payload processing
Apr 04 14:59:41 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, nonce payload processing
Apr 04 14:59:41 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:41 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
10.1.100.79
Apr 04 14:59:41 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID remote Proxy Host: address
195.229.90.21, Protocol 17, Port 0
Apr 04 14:59:41 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:41 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
185.78.161.254
Apr 04 14:59:41 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID local Proxy Host: address 1
0.10.20.2, Protocol 17 Port 1701
Apr 04 14:59:41 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, detected L2TP/IPSec session.
Apr 04 14:59:41 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:41 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:41 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, QM IsRekeyed its already be regenerated
Apr 04 14:59:41 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, error QM WSF (P2 struct & 0xcd5159c8, mess id 0x3)!
Apr 04 14:59:41 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, case of mistaken IKE responder QM WSF (struct & 0xcd51
59 c 8) , : QM_DONE, EV_ERROR--> QM_BLD_MSG2, EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MS
G--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH--> QM_BLD_MSG2, EV_VALIDATE_MSG
Apr 04 14:59:41 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
Apr 04 14:59:41 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, peer table correlator Removing failed, no match!
Apr 04 14:59:44 [IKEv1 DECODER]: IP = 195.229.90.21, IKE Responder starting QM: id msg = 00000003
Apr 04 14:59:44 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 3) with payloads: HDR + HASH (8) + HER (1) +.
ID (5) + ID (5) + NAT - OA (21) + NAT - OA (21), NUNCIO (10) + (0) NONE total length: 324
Apr 04 14:59:44 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:44 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, SA payload processing
Apr 04 14:59:44 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, nonce payload processing
Apr 04 14:59:44 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:44 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
10.1.100.79
Apr 04 14:59:44 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID remote Proxy Host: address
195.229.90.21, Protocol 17, Port 0
Apr 04 14:59:44 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:44 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
185.78.161.254
Apr 04 14:59:44 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID local Proxy Host: address 1
0.10.20.2, Protocol 17 Port 1701
Apr 04 14:59:44 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, detected L2TP/IPSec session.
Apr 04 14:59:44 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:44 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:44 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, QM IsRekeyed its already be regenerated
Apr 04 14:59:44 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, error QM WSF (P2 struct & 0xcd5159c8, mess id 0x3)!
Apr 04 14:59:44 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, case of mistaken IKE responder QM WSF (struct & 0xcd51
59 c 8) , : QM_DONE, EV_ERROR--> QM_BLD_MSG2, EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MS
G--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH--> QM_BLD_MSG2, EV_VALIDATE_MSG
Apr 04 14:59:44 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
Apr 04 14:59:44 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, peer table correlator Removing failed, no match!
Apr 04 14:59:48 [IKEv1 DECODER]: IP = 195.229.90.21, IKE Responder starting QM: id msg = 00000003
Apr 04 14:59:48 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 3) with payloads: HDR + HASH (8) + HER (1) +.
ID (5) + ID (5) + NAT - OA (21) + NAT - OA (21), NUNCIO (10) + (0) NONE total length: 324
Apr 04 14:59:48 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:48 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, SA payload processing
Apr 04 14:59:48 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, nonce payload processing
Apr 04 14:59:48 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:48 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
10.1.100.79
Apr 04 14:59:48 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID remote Proxy Host: address
195.229.90.21, Protocol 17, Port 0
Apr 04 14:59:48 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:48 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
185.78.161.254
Apr 04 14:59:48 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID local Proxy Host: address 1
0.10.20.2, Protocol 17 Port 1701
Apr 04 14:59:48 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, detected L2TP/IPSec session.
Apr 04 14:59:48 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:48 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:48 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, QM IsRekeyed its already be regenerated
Apr 04 14:59:48 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, error QM WSF (P2 struct & 0xcd5159c8, mess id 0x3)!
Apr 04 14:59:48 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, case of mistaken IKE responder QM WSF (struct & 0xcd51
59 c 8) , : QM_DONE, EV_ERROR--> QM_BLD_MSG2, EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MS
G--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH--> QM_BLD_MSG2, EV_VALIDATE_MSG
Apr 04 14:59:48 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
Apr 04 14:59:48 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, peer table correlator Removing failed, no match!
Apr 04 14:59:57 [IKEv1 DECODER]: IP = 195.229.90.21, IKE Responder starting QM: id msg = 00000003
Apr 04 14:59:57 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 3) with payloads: HDR + HASH (8) + HER (1) +.
ID (5) + ID (5) + NAT - OA (21) + NAT - OA (21), NUNCIO (10) + (0) NONE total length: 324
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, SA payload processing
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, nonce payload processing
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:57 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
10.1.100.79
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID remote Proxy Host: address
195.229.90.21, Protocol 17, Port 0
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:57 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
185.78.161.254
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID local Proxy Host: address 1
0.10.20.2, Protocol 17 Port 1701
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, detected L2TP/IPSec session.
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, QM IsRekeyed its already be regenerated
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, error QM WSF (P2 struct & 0xcd515f40, mess id 0x3)!
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, case of mistaken IKE responder QM WSF (struct & 0xcd51
5f40) , : QM_DONE, EV_ERROR--> QM_BLD_MSG2, EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MS
G--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH--> QM_BLD_MSG2, EV_VALIDATE_MSG
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, peer table correlator Removing failed, no match!
04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, empty building hash payload
04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, building IPSec delete payload
04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, build payloads of hash qm
04 Apr 15:00:08 [IKEv1]: IP = 195.229.90.21, IKE_DECODE SEND Message (msgid = 64ea9549) with payloads: HDR + HASH (8) + delete
SUMMER (12) + (0) NONE total length: 68
04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, Active unit receives an event would have expired for re
Mote 195.229.90.21 counterpart.

04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE, removing SA: Remote Proxy 195.229.90.21, Local
Proxy 10.10.20.2
04 Apr 15:00:08 [IKEv1 DEBUG]: pitcher: received the keys delete msg, spi 0x321170a2
04 Apr 15:00:11 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = d28ee0e6) with payloads: HDR + HASH (8), OF
LETE (12) + (0) NONE total length: 68
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, removal of treatment
04 Apr 15:00:11 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, completed for peer Connection. Reason: Put an end to Peer
Remote proxy 195.229.90.21 Proxy Local 10.10.20.2
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, Active unit receives a delete for remote wet event
r 195.229.90.21.

04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE, removing SA: Remote Proxy 195.229.90.21, Local
Proxy 10.10.20.2
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE SA MM:a32eab27 RRs would end: MM_ACTIV of State
E flags 0 x 00000042, refcnt 1, tuncnt 0
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE SA MM:a32eab27 ending: flags 0 x 01000002,
refcnt 0, tuncnt 0
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, empty building hash payload
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, constructing the payload to delete IKE
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, build payloads of hash qm
04 Apr 15:00:11 [IKEv1]: IP = 195.229.90.21, IKE_DECODE SEND Message (msgid = e5c290b6) with payloads: HDR + HASH (8) + delete
SUMMER (12) + (0) NONE total length: 80
04 Apr 15:00:11 [IKEv1 DEBUG]: pitcher: received the keys delete msg, spi 0xc9c523ea
04 Apr 15:00:11 [IKEv1 DEBUG]: pitcher: received the keys delete msg, spi 0xc9c523ea
04 Apr 15:00:11 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, Session is be demolished. Reason: The user has requested
04 Apr 15:00:11 [IKEv1]: ignoring msg SA brand with Iddm 36864 dead because ITS removal
04 Apr 15:00:11 [IKEv1]: IP = 195.229.90.21, encrypted packet received with any HIS correspondent, drop

EQ-INTFW01 # IPSEC: deleted leaving encrypt rule, SPI 0x243066CC
Rule ID: 0xCD487C20
IPSEC: Remove permitted outbound rule, SPI 0x243066CC
Rule ID: 0xCD51D3E8
IPSEC: Circumscribed outgoing VPN, SPI 0x243066CC context
Handle VPN: 0x00033D94
IPSEC: Deleted the inbound rule decrypt, SPI 0x44001D8E
Rule ID: 0xCD51DC68
IPSEC: Deleted the allowed inbound rule, SPI 0x44001D8E
Rule ID: 0xCD51DE08
IPSEC: Remove workflow rule entrants tunnel, SPI 0x44001D8E
Rule ID: 0xCD51CCF8
IPSEC: Circumscribed incoming VPN, SPI 0x44001D8E context
VPN handle: 0 x 00035734
IPSEC: Deleted leaving encrypt rule, SPI 0x9EF2CA7A
Rule ID: 0xCD3CD1E8
IPSEC: Remove permitted outbound rule, SPI 0x9EF2CA7A
Rule ID: 0xCD51AE20
IPSEC: Removed outbound VPN, SPI 0x9EF2CA7A context
Handle VPN: 0x00033D94
IPSEC: Deleted the inbound rule decrypt, SPI 0x866D812A
Rule ID: 0xCD487FD0
IPSEC: Deleted the allowed inbound rule, SPI 0x866D812A
Rule ID: 0xCCB3D7D0
IPSEC: Remove workflow rule entrants tunnel, SPI 0x866D812A
Rule ID: 0xCD48B110
IPSEC: Deleted incoming VPN, SPI 0x866D812A context
VPN handle: 0 x 00035734
IPSEC: HIS embryonic new created @ 0xCCB9C1F8.
RCS: 0XCD489170,
Direction: inbound
SPI: 0XADBC899B
Session ID: 0x0000E000
VPIF num: 0x00000001
Tunnel type: ra
Protocol: esp
Life expectancy: 240 seconds
IPSEC: HIS embryonic new created @ 0xCD17B2B8.
RCS: 0XCD4896C8,
Direction: outgoing
SPI: 0XD69313B6
Session ID: 0x0000E000
VPIF num: 0x00000001
Tunnel type: ra
Protocol: esp
Life expectancy: 240 seconds
IPSEC: Completed the update of NDONGO host, SPI 0xD69313B6
IPSEC: Creating outgoing VPN context, SPI 0xD69313B6
Flags: 0 x 00000225
SA: 0XCD17B2B8
SPI: 0XD69313B6
MTU: 1500 bytes
VCID: 0X00000000
Peer: 0x00000000
CBS: 0X010926E1
Channel: 0xC929B4C0
IPSEC: Finished outgoing VPN, SPI 0xD69313B6 context
Handle VPN: 0x00037A0C
IPSEC: New outbound encrypt rule, SPI 0xD69313B6
ADR SRC: 10.10.20.2
SRC mask: 255.255.255.255
ADR DST: 195.229.90.21
DST mask: 255.255.255.255
Ports of CBC
Superior: 1701
Bass: 1701
OP: equality
Ports of DST
Superior: 4500
Bass: 4500
OP: equality
Protocol: 17
Use the Protocol: true
SPI: 0X00000000
Use the SPI: false
IPSEC: Finished out encrypt rule, SPI 0xD69313B6
Rule ID: 0xCD489970
IPSEC: New rule to permit outgoing, SPI 0xD69313B6
ADR SRC: 10.10.20.2
SRC mask: 255.255.255.255
ADR DST: 195.229.90.21
DST mask: 255.255.255.255
Ports of CBC
Superior: 4500
Bass: 4500
OP: equality
Ports of DST
Superior: 4500
Bass: 4500
OP: equality
Protocol: 17
Use the Protocol: true
SPI: 0X00000000
Use the SPI: false
IPSEC: Finished allowed outbound rule, SPI 0xD69313B6
Rule ID: 0xCD4899F8
IPSEC: Completed the update of IBSA host, SPI 0xADBC899B
IPSEC: Create context incoming VPN, SPI 0xADBC899B
Flags: 0 x 00000226
SA: 0XCCB9C1F8
SPI: 0XADBC899B
MTU: 0 bytes
VCID: 0X00000000
Peer: 0x00037A0C
CBS: 0 X 01088849
Channel: 0xC929B4C0
IPSEC: Completed incoming VPN, SPI 0xADBC899B context
Handle VPN: 0x0003864C
IPSEC: updated outgoing VPN 0x00037A0C, SPI 0xD69313B6 context
Flags: 0 x 00000225
SA: 0XCD17B2B8
SPI: 0XD69313B6
MTU: 1500 bytes
VCID: 0X00000000
Peer: 0x0003864C
CBS: 0X010926E1
Channel: 0xC929B4C0
IPSEC: Finished outgoing VPN, SPI 0xD69313B6 context
Handle VPN: 0x00037A0C
IPSEC: Internal filled rule of outgoing traffic, SPI 0xD69313B6
Rule ID: 0xCD489970
IPSEC: External filled SPD rule of outgoing traffic, SPI 0xD69313B6
Rule ID: 0xCD4899F8
IPSEC: New entrants flow tunnel, SPI 0xADBC899B
ADR SRC: 195.229.90.21
SRC mask: 255.255.255.255
ADR DST: 10.10.20.2
DST mask: 255.255.255.255
Ports of CBC
High: 0
Low: 0
OP: ignore
Ports of DST
Superior: 1701
Bass: 1701
OP: equality
Protocol: 17
Use the Protocol: true
SPI: 0X00000000
Use the SPI: false
IPSEC: Incoming Tunnel filled with flow, SPI 0xADBC899B
Rule ID: 0xC92B0518
IPSEC: New rule to decrypt incoming, SPI 0xADBC899B
ADR SRC: 195.229.90.21
SRC mask: 255.255.255.255
ADR DST: 10.10.20.2
DST mask: 255.255.255.255
Ports of CBC
Superior: 4500
Bass: 4500
OP: equality
Ports of DST
Superior: 4500
Bass: 4500
OP: equality
Protocol: 17
Use the Protocol: true
SPI: 0X00000000
Use the SPI: false
IPSEC: Completed inbound rule decrypt, SPI 0xADBC899B
Rule ID: 0xCD3CD1A8
IPSEC: New rule incoming authorization, SPI 0xADBC899B
ADR SRC: 195.229.90.21
SRC mask: 255.255.255.255
ADR DST: 10.10.20.2
DST mask: 255.255.255.255
Ports of CBC
Superior: 4500
Bass: 4500
OP: equality
Ports of DST
Superior: 4500
Bass: 4500
OP: equality
Protocol: 17
Use the Protocol: true
SPI: 0X00000000
Use the SPI: false
IPSEC: Finished entering permitted rule, SPI 0xADBC899B
Rule ID: 0xCD03D6F0
IPSEC: HIS embryonic new created @ 0xCD51AC70.
RCS: 0XCD51ABC0,
Direction: inbound
SPI: 0X89796CE7
Session ID: 0x0000E000
VPIF num: 0x00000001
Tunnel type: ra
Protocol: esp
Life expectancy: 240 seconds
IPSEC: HIS embryonic new created @ 0xCD488538.
RCS: 0XCD488D48,
Direction: outgoing
SPI: 0XEF66E002
Session ID: 0x0000E000
VPIF num: 0x00000001
Tunnel type: ra
Protocol: esp
Life expectancy: 240 seconds
IPSEC: Completed the update of NDONGO host, SPI 0xEF66E002
IPSEC: Finished outgoing VPN, SPI 0xEF66E002 context
Handle VPN: 0x00037A0C
IPSEC: New outbound encrypt rule, SPI 0xEF66E002
ADR SRC: 10.10.20.2
SRC mask: 255.255.255.255
ADR DST: 195.229.90.21
DST mask: 255.255.255.255
Ports of CBC
Superior: 1701
Bass: 1701
OP: equality
Ports of DST
Superior: 4500
Bass: 4500
OP: equality
Protocol: 17
Use the Protocol: true
SPI: 0X00000000
Use the SPI: false
IPSEC: Finished out encrypt rule, SPI 0xEF66E002
Rule ID: 0xCD488948
IPSEC: New rule to permit outgoing, SPI 0xEF66E002
ADR SRC: 10.10.20.2
SRC mask: 255.255.255.255
ADR DST: 195.229.90.21
DST mask: 255.255.255.255
Ports of CBC
Superior: 4500
Bass: 4500
OP: equality
Ports of DST
Superior: 4500
Bass: 4500
OP: equality
Protocol: 17
Use the Protocol: true
SPI: 0X00000000
Use the SPI: false
IPSEC: Finished allowed outbound rule, SPI 0xEF66E002
Rule ID: 0xCD51BEE0
IPSEC: Completed the update of IBSA host, SPI 0x89796CE7
IPSEC: Completed incoming VPN, SPI 0x89796CE7 context
Handle VPN: 0x0003864C
IPSEC: Finished outgoing VPN, SPI 0xEF66E002 context
Handle VPN: 0x00037A0C
IPSEC: Filled internal SPD rule of outgoing traffic, SPI 0xEF66E002
Rule ID: 0xCD488948
IPSEC: External filled SPD rule of outgoing traffic, SPI 0xEF66E002
Rule ID: 0xCD51BEE0
IPSEC: New entrants flow tunnel, SPI 0x89796CE7
ADR SRC: 195.229.90.21
SRC mask: 255.255.255.255
ADR DST: 10.10.20.2
DST mask: 255.255.255.255
Ports of CBC
High: 0
Low: 0
OP: ignore
Ports of DST
Superior: 1701
Bass: 1701
OP: equality
Protocol: 17
Use the Protocol: true
SPI: 0X00000000
Use the SPI: false
IPSEC: Incoming Tunnel filled with flow, SPI 0x89796CE7
Rule ID: 0xCD51C6F0
IPSEC: New rule to decrypt incoming, SPI 0x89796CE7
ADR SRC: 195.229.90.21
SRC mask: 255.255.255.255
ADR DST: 10.10.20.2
DST mask: 255.255.255.255
Ports of CBC
Superior: 4500
Bass: 4500
OP: equality
Ports of DST
Superior: 4500
Bass: 4500
OP: equality
Protocol: 17
Use the Protocol: true
SPI: 0X00000000
Use the SPI: false
IPSEC: Completed inbound rule decrypt, SPI 0x89796CE7
Rule ID: 0xCD487CC8
IPSEC: New rule incoming authorization, SPI 0x89796CE7
ADR SRC: 195.229.90.21
SRC mask: 255.255.255.255
ADR DST: 10.10.20.2
DST mask: 255.255.255.255
Ports of CBC
Superior: 4500
Bass: 4500
OP: equality
Ports of DST
Superior: 4500
Bass: 4500
OP: equality
Protocol: 17
Use the Protocol: true
SPI: 0X00000000
Use the SPI: false
IPSEC: Finished entering permitted rule, SPI 0x89796CE7
Rule ID: 0xCD487E68

EQ-INTFW01 #.

--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH--> QM_BLD_MSG2, EV_VALIDATE_MSG
Apr 04 14:59:48 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
Apr 04 14:59:48 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, peer table correlator Removing failed, no match!
Apr 04 14:59:57 [IKEv1 DECODER]: IP = 195.229.90.21, IKE Responder starting QM: id msg = 00000003
Apr 04 14:59:57 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = 3) with payloads: HDR + HASH (8) + HER (1) +.
ID (5) + ID (5) + NAT - OA (21) + NAT - OA (21), NUNCIO (10) + (0) NONE total length: 324
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, SA payload processing
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, nonce payload processing
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:57 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
10.1.100.79
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID remote Proxy Host: address
195.229.90.21, Protocol 17, Port 0
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload processing ID
Apr 04 14:59:57 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.229.90.21, ID_IPV4_ADDR received ID
185.78.161.254
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, data received in payload ID local Proxy Host: address 1
0.10.20.2, Protocol 17 Port 1701
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, detected L2TP/IPSec session.
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, payload NAT Original address of treatment
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, QM IsRekeyed its already be regenerated
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, error QM WSF (P2 struct & 0xcd515f40, mess id 0x3)!
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, case of mistaken IKE responder QM WSF (struct & 0xcd51
5f40) , : QM_DONE, EV_ERROR--> QM_BLD_MSG2, EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MS
G--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH--> QM_BLD_MSG2, EV_VALIDATE_MSG
Apr 04 14:59:57 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
Apr 04 14:59:57 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, peer table correlator Removing failed, no match!
04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, empty building hash payload
04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, building IPSec delete payload
04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, build payloads of hash qm
04 Apr 15:00:08 [IKEv1]: IP = 195.229.90.21, IKE_DECODE SEND Message (msgid = 64ea9549) with payloads: HDR + HASH (8) + delete
SUMMER (12) + (0) NONE total length: 68
04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, Active unit receives an event would have expired for re
Mote 195.229.90.21 counterpart.

04 Apr 15:00:08 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE, removing SA: Remote Proxy 195.229.90.21, Local
Proxy 10.10.20.2
04 Apr 15:00:08 [IKEv1 DEBUG]: pitcher: received the keys delete msg, spi 0x321170a2
04 Apr 15:00:11 [IKEv1]: IP = 195.229.90.21, IKE_DECODE RECEIPT Message (msgid = d28ee0e6) with payloads: HDR + HASH (8), OF
LETE (12) + (0) NONE total length: 68
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, processing hash payload
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, removal of treatment
04 Apr 15:00:11 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, completed for peer Connection. Reason: Put an end to Peer
Remote proxy 195.229.90.21 Proxy Local 10.10.20.2
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, Active unit receives a delete for remote wet event
r 195.229.90.21.

04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE, removing SA: Remote Proxy 195.229.90.21, Local
Proxy 10.10.20.2
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE SA MM:a32eab27 RRs would end: MM_ACTIV of State
E flags 0 x 00000042, refcnt 1, tuncnt 0
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, IKE SA MM:a32eab27 ending: flags 0 x 01000002,
refcnt 0, tuncnt 0
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, sending clear/delete with the message of reason
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, empty building hash payload
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, constructing the payload to delete IKE
04 Apr 15:00:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.229.90.21, build payloads of hash qm
04 Apr 15:00:11 [IKEv1]: IP = 195.229.90.21, IKE_DECODE SEND Message (msgid = e5c290b6) with payloads: HDR + HASH (8) + delete
SUMMER (12) + (0) NONE total length: 80
04 Apr 15:00:11 [IKEv1 DEBUG]: pitcher: received the keys delete msg, spi 0xc9c523ea
04 Apr 15:00:11 [IKEv1 DEBUG]: pitcher: received the keys delete msg, spi 0xc9c523ea
04 Apr 15:00:11 [IKEv1]: Group = DefaultRAGroup, IP = 195.229.90.21, Session is be demolished. Reason: The user has requested
04 Apr 15:00:11 [IKEv1]: ignoring msg SA brand with Iddm 36864 dead because ITS removal
04 Apr 15:00:11 [IKEv1]: IP = 195.229.90.21, encrypted packet received with any HIS correspondent, drop

!

I'm glad that the problem is solved!
Please mark the thread as answered in favour of other members of the community.

Kind regards
Dinesh Moudgil

ID use internal ODI & marker issue

Hi all
I am facing some issues while developing a piece of code to export objects marked (using markers). I use the query below to identify the procedures and packages, marked
WITH LIST_TAB AS
(SELECT I_TRT OBJ_ID, OBJ_NAME, 'SnpTrt' SNP_TRT CLASS_NAME TRT_NAME
UNION ALL
SELECT I_PACKAGE OBJ_ID, OBJ_NAME, 'SnpPackage' SNP_PACKAGE CLASS_NAME PACK_NAME)
SELECT THE LTAB LOCALITIES. OBJ_ID OBJ_ID, LOCALITY. OBJ_NAME |'. XML' FILE_NAME, LOCALITY. CLASS_NAME CLASS_NAME
OF LIST_TAB COMMUNITIES LTAB,.
SNP_OBJ_STATE OST,
SNP_STATE2 S2
WHERE OST. I_STATE = S2. I_STATE
AND OST. I_INSTANCE = OST. OBJ_ID
AND S2. STATE_CODE = "OBJEXP."
I scored a procedure and a package. When I run this query, I get another package object (which is actually not marked), his internal ID is the same as the ID of marked procedure.
I get 2 packs and procedure 1. But, this should get me only the marked objects (1 package and procedure 1).
ODI using the same code for different objects? If so, how can I solve the above query to get the marked object?
Thank you
MT

Hello

you do not see the column of I_OBJECT.

This query retrieves all the package

SELECT SP. PACK_NAME, SS2. STATE_NAME MARKER_NAME OF

SOS SNP_OBJ_STATE,

SNP_STATE2 SS2,

SNP_PACKAGE SP

WHERE SS2. I_STATE = SOS. I_STATE

- AND SS2. STATE_CODE AS 'SOME_FILTER_ON_MARKER_NAME '.

AND SOS. I_INSTANCE = SP. I_PACKAGE

AND SOS. I_OBJECT = 3200 - PACKAGE

;

This whole process

SELECT ST. TRT_NAME, SS2. STATE_NAME MARKER_NAME OF

ST SNP_TRT,

SOS SNP_OBJ_STATE,

SS2 SNP_STATE2

WHERE TRT_TYPE = 'U' - PROCEDURE

AND SS2. I_STATE = SOS. I_STATE

- AND SS2. STATE_CODE AS 'SOME_FILTER_ON_MARKER_NAME '.

AND SOS. I_INSTANCE = ST. I_TRT

AND SOS. I_OBJECT = 3600 - PROCEDURE

;

LER, we know

Newsstand to only issue app?

Hello
I do a monthly magazine for the iPad with the Adobe DPS unique edition that comes with the creative cloud. This means that I can only make apps for a single question (1 question in the application) and I can't do multi-probleme apps (several questions in 1 app). My client is not ready to pay the tax of Professional Adobe DPS 'expensive' 3600 euros per year which is understandable, because my client is a medium size Publisher. So far, I always brought the last magazine issue on the App Store via a status update app (version 1.1, version 1.2, version 1.3, etc.). However, the problem here is that I have to wait for this app update be reviewed and approved by Apple. In the last 6 months, which takes 3 to 4 days. Now, he's already taken 7 days and the current issue of the magazine is a very sensitive time and my client is very upset about it (understandably).
So, I thought of the evolution of the application in an application that appears on newsstands. However, I have read that kiosk does not support single-issue apps which is logical to a certain extent. But I am trying to find an alternative for my dilemma because I really want to avoid the wait time for an app to be reviewed and approved. I already called iTunes Connect to the United States to talk this through and they said that download automatically in the background (as I need it for my magazine application) are ONLY possible with an application of newsstand.
I'm really stuck with my problem. Can someone please give me a hand here, because it really is a serious question?

Short of paying for a pro or business account there is nothing that you can do.

You can check other suppliers, but you will see that even if some may be

less expensive there is no free way to handle this.

Appeal iPhone issues 7 more

I recently bought the new iPhone 7 more. Not only am I having problems with the LTE service, bounce back between 3 G and no service I am now having problems with call connectivity. When you try to make an outgoing call, I get an automatic response from my carrier (Verizon) "it's Verizon, we are unable to complete your call at this time, please turn off your phone and back and try again."

It is a known issue with the iPhone 7 and Verizon. Supposed to be Apple and Verizon are seeking him. It has been a problem since the phone was released. Do a Google search or search here on the forums for a temporary solution but not a cure. But basically to stop the LTE oice and data into data only in the settings.

iPhone 6 more hang freeze issues

My iPhone 6 more guard suspended (gel) for the past 6 months, I have to reset the whole phone sometimes up to 2 times just to get it to work again. Been a loyal (including my entire family) custome since gen 1 iPhone, iPad, mac book. Am really disappointed with the quality now. Did not bring to the service center since the first day of the problem because I thought that was just a few bugs & was sure that apple will fix it, but after many update of iOS so far, the pesisit still problem.

iPhone is more quality I've known, hope apple can fix this problem before finally losing the most loyal customers

Hello BennyFoo,

Thank you for bringing your iPhone freeze questions here for Apple Support communities. I understand how it is important to have a reliable phone. I'm happy to check this with you.

The first thing we want to make sure that all of your data on your device is safe. You can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

Once your data is safe, try to turn off your device, then again on the March. Sometimes, that's all that is needed for connections reset and everything working properly again. This article help from Apple will help you to do: restart your iPad, iPhone or iPod touch. If you are still having issues, try force reset then. It is designed to be used when the iPhone does not respond, and it looks to be the exact symptoms that you are experiencing right now.

If you still experience the same problems after reboot, please try to restore your device from a backup by using this article help: restore your iPhone, iPad or iPod touch from a backup. If you don't have a current backup, please try this help article: If you can not update or restore your iPhone, iPad, or iPod touch. Please pay close attention when you get to step 4 who said "when you see the option restore or put to update, choose update. iTunes will try to reinstall iOS without erasing your data. "to get your iOS reinstalled. Test if the issue is still ongoing.

Thanks again and have a great rest of your day.

Pages on issues of formatting to iCloud

Hey everybody,

I created a document Pages using the Pages application on my macbook pro I downloaded then to iCloud Pages so that I can access it from any computer. The issue I'm having is that I formatted some of the text to have a black background and the text to yellow color. For the life of me I can't understand how to change the background color of text on the Pages of iCloud. I beginning to think that changing the background color of text just is not possible on the platform of iCloud, but wanted to put this out there just to make sure.

I appreciate any help or clarification on this issue.

Thank you!

Background (highlight) text color controls are absent in the Pages for iCloud, because it is a subset of Pages for Mac.

This has been discussed in a previous post here, not so long ago.

External hard drive mounting issues on MacOS Sierra

After upgrading to OS Sierra, I found that my USB3 drives, directly connected to my iMac end of 2012, turn off at startup. USB 2 disks are unaffected and connect properly. The only way to access my USB3 disks is to disconnect and reconnect every time I start the computer, then they are ok. I tried to reset the NVRAM, but it did not work. I found Os El Capitan until this issue is resolved.

Do not mount or actually turns out always the system start? It was not clear in your subject line and content later, what was going on.

Are they NTFS formatted drives? See the solutions frequently asked and answered forum if they are.

TVos 10 - Apple TV 4 (Wifi issues)

My apple TV was working until it was upgraded to the new update 10 TVos great. I reset my router and modem, reset the apple tv itself and it has restarted several times, all with the same mistake of not being able to connect to the wifi network. My iPhone and computer are connected properly, get about 40mbps is normal, and the router is in the same room. Everyone knows these issues? No luck, anyone know a fix?

have you tried to restore the appletv? Restore your Apple TV via iTunes - Apple Support

I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

Try to run this program in your usual account, then copy and paste the result in a response. The program was created by Etresoft, a regular contributor. Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

Etrecheck - Information System

connectivity issues mobile iPhone 7

I have a new iPhone 7 jet black, so far I'm in love. But yesterday, I noticed an annoying problem. The phone loses the network connection (cell to the & t) and he no reconnect, it will remain just it saying no service. I have to go in airplane mode and outside to force it to look for the network connection.

everyone knows this? and everybody understand what it could be?

I already missed messages and a phone call. This could worsen as boring to become a problem. If anyone has any idea what this could be please give me a heads up!

OH! Another thing I noticed, when the iPhone is connected my signal strength went from-102 to my 6 sec to-86 on my 7! Then when I am connected I am connected!

Hello jpgraphx,

Thank you for using communities Support from Apple. I know have a cell connection issue on your new iPhone, it's not what you expect. The good news are the following steps will help to solve your problem with loss of cellular data and see no Service and get your new iPhone works properly again.

If you cannot connect to a cellular network or cellular data

See you soon!

Backup issues after upgrade to iOS10

Dear users of Apple,

I updated my iphone 6 more yesterday with iOS 10. Phone works quite well. But I have my phone backup problems. I usually back up my phone with my iTunes Macbook (Via cable and sometimes on wifi). But after the update to iOS 10 it seems that I can't back up my phone more. I don't know the real cause of this problem.

1. I am not able to save my iPhone via wifi data in iTunes. (Previously it was not the case).

2. I tried to back up my phone using the cable also. Also, I pressed "Trust" this computer, but I get this error message. Please see below.

Also, I allowed my computer by disconnecting iTunes and logging back there. And yet I have the same issues.

"iTunes could not connect to the iPhone because an invalid response was received from the device."

Does anyone know what this answer is invalid can be?

Do I have to change the settings in my phone or iTunes?

Help please!

Thank you very much

Deven

Did install you the latest iTunes? iOS 10 requires iTunes 12.5.1.

Get the latest version of iTunes - Apple Support

A 2 month old iPod Touch 5th generation began to lose its charge the battery overnight. East - the developer of a battery issue?

A "renovated" old 2 months iPod Touch 5th generation just recently started losing its charge the battery during the night. East - the developer of a battery issue?

Perhaps. Where did you buy this device?

Issue of AP 3600

Similar Questions

Maybe you are looking for