Issue of disconnection SSO

Similar Questions

• Satellite Pro A200 wireless issue sometimes disconnects

  Hello

  I have a Satellite Pro A200 with a wireless issue.
  I use home wireless. Every now and then while surfing it won't find the page. I try to connect via my VPN connection I have for the office.
  If you click Cancel, it will sometimes continue surfing very well but sometimes can not find the page.

  I disabled the wireless and connection is used hard and no problem.
  It would be desirable to re - install the drivers for the wireless?
  I think I've removed the software toshiba Wireless thing (forget his name) when I got it.
  So maybe that's the issue.

  Any help would be apreciated.

  Thank you

  Of course, it would be desirable to update the WLan driver in most cases it s WLan compatibility issue between card WiFi and router

  I recommend updating the driver WLan and also you can update the BIOS if a new version has been available for your laptop model

  Best regards & good luck

• VCenter deployment issues 6 - domain SSO

  Hello

  I have a problem my head around defining the domain of SINGLE sign-on in my new vSphere deployment package 6.0. I have a domain active directory (server.local) and installing vCenter 6, you are prompted for the SSO domain name (default is vsphere.local). What I want to know, it is important that name and what is the impact of the choice or change default name? The reason for my question is the following:

  1. we have a vSphere/vCenter 5.5 for our domain infrastructure deployment and the application that uses vsphere.local as the domain of SINGLE sign-on.

  2. I am deploying a new environment 6.0 vSphere/vcenter for a new VDI environment.

  3. I will deploy a second 6.0 environment vSphere/vCenter for a second VDI environment.

  4. I will use more connected between two vCenter environment 6 because I want to keep totally separate.

  In factoring, is it safe to use vsphere.local for my first 6.0 deployment even if I use vsphere.local for my production environment 5.5 already? If it is OK, then is it OK to use vsphere.local for both of my 6.0 vSphere deployments, even if all three environments will be authenticating against the domain active directory domain.local? The domain authentication UNIQUE write anything to AD or just authenticates against it so that I can use the same SSO domain in three distinct environments without negative impact?

  Any help with sort my confusion with this would be greatly appreciated.

  Thank you!

  Yes, it is safe to use the same domain name SSO for multiple deployments of vSphere, even if you use the same Active Directory domain as a source of identity. Don't forget that before vCenter 6, you are not able to change the domain name from SSO for anything other than the vsphere.local and this has never been a limit to how many vCenter Server can be deployed and configured to use the same Active Directory domain.

• WOW kept is disconnection on home premium Windows 7 problem! and the error on the map of Ndivia.

  I already deleted WTF, interference and file cache and still issue of disconnection and I read card window update ndivia had error on update because that's not 32 bits, it suppose to be 64-bit.   It remains a problem.  Please help me to solve this problem of disconnection on world of warcraft.

  I'm with window 7 home premium and using Ndivia Genforce 6158 THE.

  Hello

  Rather than update the Nvidia card drivers on the system, I suggest you to uninstall the drivers as well as software from the Device Manager and then download the drivers for Ndivia 6150 THE on the Nvidia site and install it on the system and check.

  a. Click Start and type device manager in the search box start and press to enter. This will open the Device Manager window.

  b. click on the graphics card, then right-click on the driver and then click on uninstall.

  Note: Place a checkmark near the uninstall software with the driver to remove the software.

  c. download the NVIDIA drivers from the link below and check.

  Windows 7 32 bit

  http://www.nvidia.com/object/Win7-WinVista-32bit-260.99-WHQL-driver.html

  Windows 7 64 bit

  http://www.nvidia.com/object/Win7-WinVista-64bit-260.99-WHQL-driver.html

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• NAC SSO vpn: is the CASE real-IP mode supported?

  Hi all

  I tried to setup a CAS like inline real gateway IP to support only enroll via a Cisco ASA running IPsec cisco vpn client.

  CASE and CAM are 4.5.1 running

  I followed the guide online to the letter (except for running in the virtual gateway mode and do the mapping vlan)

  My vpn authentication works on the SAA and Ray is transmitted if the CASE to the ACS server very well.

  I did a tcpdump on the case and cam and saw the package of accounting Radius passed from the ASA to the CAs, and then by the CAS to the CAM, so managing accounts radius 'start' package is sent to the user authenticated on the vpn.

  The problem is that the laptop is trying to access the network does not display the "auto connect" screen of the agent of the CCA, in contrast, agent of the CCA screen the authentication of user request and password details.

  I also following the advice of this link unsuccessfully

  (Known issue for VPN SSO after upgrade to version 4.5)

  http://www.Cisco.com/en/us/docs/security/NAC/appliance/Release_notes/45/45rn.html#wp711526

  So, I am now suspecting whether the CASES can take in charge SSO real-mode gateway IP.

  Dale

  I've implemented in real gw ip mode, but not in 4.5. It has worked well.

  What is the guide that you followed?

  http://www.Cisco.com/en/us/partner/docs/security/NAC/appliance/configuration_guide/45/CAs/s_vpncon.html

• Host disconnected from Vcenter. cannot restart both agents

  Hello

  Following this thread: http://communities.VMware.com/message/1993369#1993369

  After 1:30 the host where the rescan HBAS was issued, became disconnected from Vcenter.

  I tried to restart the agent from the console, but he was hanged.

  I happened to have logged on esx, so I stopped the agents and restarted, but it hung for 1 / 2 h from "usbsarbitrator." I left.

  Looks like I need to restart the server, but I have the feeling that all the virtual machine running (OK for now) on this topic will be off and restarts automatically via DRS at best or not at all, if for some reason any DRS does not work (because of the issue of the host).

  To make matter worse, vcenter is running on this host at the moment.

  Is there a way to 'reconnect' vcenter to host this way can I vmotion all the VM on it before restarting the host?

  Thanks in advance

  Is you are using ESXi version connect the host using putty and run below command

  restart the /sbin/services.sh

• Restart the server from connection - disconnects all Clients of PCoIP

  We are beginning (fortunately) in a deployment of view 4.5 and have still running production desktop computers.  We have recently improved from 4.1 to 4.5, and during the upgrade we restarted our connection to the primary server view.  When we did that, PCoIP 10 clients or if we had connected all disconnected - which caused us a lot of trouble, as we plan to deploy several hundred.

  What I've read, PCoIP are supposed to be direct connections and clients and not need the broker after the connection is established.  I looked for the "direct connection" setting, but don't see anything like that, given Admin.

  Is it normal that all customers would be disconnected on the loss of the broker?  Is it possible to prevent this?

  Thank you
  Sean

  It is an expected behavior, if we had feature requests to change. For a bit of background to the explanation, there is two session types at play here that I call the broker session (session authenticated directly to the broker) and the desktop session (user session track on remote desktop).

  When you connect to a session of office through the broker, he has associated with the session broker so that the expiration of the broker session (via explicit logout or the value of the overall delay defined in the admin INTERFACE) it can disconnect by force the desktop session. Essentially, when you turn off the broker properly it will cancel all broker ILA sessions, each looking for sessions connected user, then issue a disconnection request to the agent as with a normal expiration. In the case of an accident equipment/failure of the broker direct connect sessions will not be affected.

• IPad Air to TV HDMI cable connection problem

  I can watch the movie using YouTube even he inserted ads several times during playback in iPad Air. But when I connect iPad Air to the TV cable HDMI, the TV does not work after second played advertising time, the screen went black. I can continue to watch only, disconnect and reconnect the cable. How can I solve it? The iOS is 9.3.1.

  Hello HSIAO CHUN.

  If you experience problems connecting to your iPad Air to your TV via a digital AV adapter from Apple, the information described below can help to restore all the features to your configuration.

  If an application is no video display or read audio data

  The app is not compatible with the adapter. Check compatibility on the information page of the application in the App Store or contact the developer.

  If an alert says a HDCP compatible device

  Your content is not compatible with the adapter. Movies, series TV and video streaming applications require High-Bandwidth Digital Content Protection (HDCP). If you try to play these movies, shows and streaming videos using a connection digital non-HDCP - as the Apple VGA adapter - one alert will ask you for a HDCP compatible device.

  If you need help with other issues

  1. Disconnect, then reconnect your adapter on your iPhone, iPad or iPod touch and your TV, monitor or projector.
  2. Make sure that your VGA or HDMI cable works, given that the issue could be with the cable.
  3. Remove all cables extension VGA or HDMI or converters. Accessories that convert a VGA or HDMI signals to different video formats (DVI, Composite, Component) are not compatible.
  4. Make sure you have the latest version of iOS.
  5. Contact Apple support.

  On AV adapters digital Apple for iPhone, iPad and iPod touch
  https://support.Apple.com/en-us/HT202044

  All my best.

• Qosmio F10: Edition of USB-mouse - how can I reinstal drivers USB port?

  Hello

  I am the owner of a Qosmio F10 with Win XP MCE.

  I have recently encountered problems with my USB ports I have 3 in my computer. It began with one of them and has now spread to the rest of them.

  The problem occurs especially with my mouse. The mouse freezes and sometimes I hear the alarm which is generally issued when disconnected a device. Sometimes it restarts seconds later and sometimes I have to physically unplug my mouse and plug it back in to restart.

  The problem also occurred with other devices that is my Ipod.

  The problem could be related to lack of memory because it seems to me see more during the execution of the programs such as Photoshop, Illustrator, InDesign, Flash, etc., however I can't say that for sure.

  Can I reinstal the drivers for the USB ports? I tried reinstalling my driver of mouse, with no effect.

  Please note that I cannot go into 'Control panel' I get an error message and closes the window.

  I hope someone can help me.

  Best regards

  Green tentacle

  USB drivers are part of the Windows operating system. 3rd party USB drivers don t exist!
  What you could do is to disconnect all USB devices and could remove the USB ports/hubs/controllers in Device Manager.

  Reboot the laptop.
  After restarting again the operating system should recognize and install again the USB ports.
  This accelerated procedure should help you

• [Thinkpad T410s] wifi doesn't work no matter HW

  Hi all

  I changed the fan and I disassembled my thinkpad. Since I put it together my wifi does not work. If I want to activate the wifi via Fn + F5, I get error NO WIFI ADAPTER FOUND. I tried to change key wireless and also I changed in the BIOS. Nothing helps. It seems that some HW issue (cable disconnected, modul unplugged etc..). Does anyone have idea what to do with this problem?

  Concerning

  Problem has been resolved. The wireless button flex wire was not connected to the conector on motherboard PCB. Not visible so much.

• Failed to start service vcenter

  I can't start vcenter service this morning. ODBC connection is good

  in vpxd it shows that

  8 07:00 [04180 'VpxProfiler' warning] Vpxd::ServerApp:Init [VpxdInvtDVS::Init2 (gDB)] took ms 641

  2014 09-30 T 09: 14:09.487 - 07:00 [04180 'dbdbPortgroup' info] [VpxdInvtDVPortGroup::PreLoadDvpgConfig] loaded config VGA objects [44]

  2014 09-30 T 09: 14:09.519 - user Solution from 07:00 [info 04180 '[OSP] [SsoFactory_CreateFacade]"] value: vCenterServer_2014.08.19_134647

  2014 09-30 T 09: 14:09.519 - 07:00 [04180 '[OSP] [SsoFactory_CreateFacade]' info] VC ServiceId in LookupService: {C5FF5915-9EC3-4063-99D7-CAF5283D0149}: 5

  09 - 2014-30 T 09: 14:09.519 - 07:00 [04180 '[OSP] [SsoFactory_CreateFacade]' info] STS URI value: https://vc:7444/ims/STSService? wsdl

  09 - 2014-30 T 09: 14:09.519 - 07:00 [info 04180 '[OSP] [SsoFactory_CreateFacade]"] Admin URI value: https://VC:7444 / sso-adminserver/sdk

  09 - 2014-30 T 09: 14:09.519 - 07:00 [04180 '[OSP] [SsoFactory_CreateFacade]' info] Groupcheck URI value: https://VC:7444 / sso-adminserver/sdk

  2014 09-30 T 09: 14:09.519 - 07:00 [04180 '[OSP] [SsoFactory_CreateFacade]' info] Certificate SSL VC place: C:\ProgramData\VMware\VMware VirtualCenter\ssl\rui.crt

  09 - 2014-30 T 09: 14:09.519 - 07:00 [info 04180 '[OSP] [CreateSsoFacade]"] [CreateUserDirectory] m the value URI: https://vc:7444/ims/STSService? wsdl

  09 - 2014-30 T 09: 14:09.519 - 07:00 [info 04180 '[OSP] [CreateSsoFacade]"] [CreateUserDirectory] Admin URI value: https://VC:7444 / sso-adminserver/sdk

  09 - 2014-30 T 09: 14:09.519 - 07:00 [info 04180 '[OSP] [CreateSsoFacade]"] [CreateUserDirectory] Groupcheck URI value: https://VC:7444 / sso-adminserver/sdk

  2014 09-30 T 09: 14:09.706 - 07:00 [04180 error "Default"] Found dangling SSL error: [0] error:00000001:lib (0): func (0): reason (1)

  2014 09-30 T 09: 14:09.706 - 07:00 [04180 error "Default"] Found dangling SSL error: [1] error:00000001:lib (0): func (0): reason (1)

  2014 09-30 T 09: 14:09.706 - 07:00 [04180 error "[OSP] [SsoFactory_CreateFacade]"] Impossible to create the SSO façade: vmodl.fault.SystemError.

  2014 09-30 T 09: 14:09.706 - 07:00 [04180 error 'vpxdvpxdMain'] [Vpxd::ServerApp:Init] Init failed: Vpx::Common:Sso:SsoFactory_CreateFacade(sslContext,_ssoFacadeConstPtr)

  -> Backtrace:

  -> backtrace [00] rip 000000018018b86a

  -> backtrace [01] rip 0000000180102ac8

  -> backtrace [02] rip 0000000180103f9e

  -> backtrace [03] rip 000000018008d22b

  -> backtrace [04] rip 0000000000485bdc

  -> backtrace [05] rip 00000000004 a 6652

  -> backtrace [06] rip 000000013fc0f001

  -> backtrace [07] rip 000000013fc08e1c

  -> backtrace [08] rip 000000013fe2d8db

  -> backtrace [09] rip 000007fefd88a82d

  -> backtrace [10] rip 00000000774759ed

  -> backtrace [11] rip 00000000776ac541

  ->

  2014 09-30 T 09: 14:09.706 - 07:00 [04180 'VpxProfiler' warning] ServerApp::Init [TotalTime] took ms 11234

  2014 09-30 T 09: 14:09.706 - 07:00 [04180 error "Default"] could not initialize VMware VirtualCenter. Closing...

  2014 09-30 T 09: 14:09.722 - 07:00 [04180 'vpxdvpxdSupportManager' info] free/busy information wrote

  2014 09-30 T 09: 14:10.487 - 07:00 [06680 WARNING opID "VpxProfiler" SWI-726ad9f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12015

  2014 09-30 T 09: 14:22.487 - 07:00 [06296 WARNING opID "VpxProfiler" SWI-2c226ef =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2014 09-30 T 09: 14:34.487 - 07:00 [06672 WARNING opID "VpxProfiler" SWI-1c39fc12 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2014 09-30 T 09: 14:46.486 - 07:00 [06672 WARNING opID "VpxProfiler" SWI - 27769 c 53 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2014 09-30 T 09: 14:58.486 - 07:00 [06672 WARNING opID "VpxProfiler" SWI-12512cf1 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2014 09-30 T 09: 14:58.861 - 07:00 [04180 'Default' info] forcing of VMware VirtualCenter stop now

  any idea? SSO service / inventory is started end

  Looks like the issue was a sso login incorrect being introduced in sql server password. Once I corrected the sso login password for the database, the vcenter service started very well.

  At least it worked in my situation.

  Thank you

• Reuse a piece of possible code ESSCMD?

  Hello
  
  We have multiple Esscmd script files, some call it a calculation script, some of them loading the data into Essbase, some run report scripts, and some made all three together.
  
  It's every Esscmd script is coded with the server name, user name, password like that hard
  -----
  File 1
  Output 1 "file1.log";
  
  Connection 'Server' 'Username', 'Password ';
  Select "App" "Db";
  
  RUNCALC 2 'Calcscript ';
  DISCONNECTION;
  -----
  File 2
  Output 1 "file1.log";
  
  Connection 'Server' 'Username', 'Password ';
  Select "App" "Db";
  
  RUNCALC 2 'Someotherscript ';
  DISCONNECTION;
  -----
  
  The problem is that we have about 30 of them. If we have a change in the URL of the server or admin/password, we must go each of them individually and change. Is there anyway I defined the * Login 'Server' 'Username', 'Password '; "bit in a file and the rest in other? In this way, I only change a file information.
  
  Best regards, N13

  You don't mention what version you are, but if 9 or 11 (and perhaps some of 7), you can convert the Esscmd MAxL and pass parameters. It's easy prestty that there is a conversion program that works relly well. Look for it in the referece tech. In MaxL, you may also have several scripts called identifiers coming from the connect command as long as you do not issue a disconnection, you can then call the following script (without a connection command and it run. something like)

  Essmsh Login.mxl
  Essmsh myimprot.mxl
  Essmsh MyCalc.mxl
  Essmsh logout.mxl

  You may also search the blog of Cameron Lackpour on automation and settings

• Place in untrusted clients after disconnection AS SSO

  I have a deployment L3 OOB of the NAC with AD SSO. Users are mapped to different roles according to their belonging to OU, then to different VLANS. What happens is that if a user with a certain role connects to a customer and is NEGLIGIBLE in its VLAN, say VLAN10, and then disconnects from the PC, the PC remains in VLAN10.

  Another user to a different role now arrives and opens a session on that same PC remains in the same VLAN, but really need to switch to a different VIRTUAL LAN because it has a different role.

  If the system is restarted then everything works well as the linkdown SNMP trap is sent to the NAM.

  How can I cause clients using AD SSO change the role of the port in not authenticated when they connect from the system? I know this can work with band but I don't know if this can be done with OOB.

  Sachin,

  Logoff OOB service is 4.8, which release in late summer. Now you want to can not do.

  HTH,

  Faisal

• Issue of iOS 9.3 Bluetooth disconnection

  I noticed that * might * have a bug with iOS 9.3.  All my devices using bluetooth now seem to disconnect randomly when using.  All my cars, headphones, bluetooth etc. soundbars have met randomly ~ 10 second interruption in the connection during normal use.  Devices will reconnect sometimes, other times I have to turn off the accessory and start up.  What happens with a 6s and is verified as event at least 6 different various vintage accessories using bluetooth.  Everyone has noticed this after the upgrade to 9.3?  Before application of 9.3 I had never seen this error before.  I also had this happen with at least a helmet on my iPad Pro using 9.3 as well.  I did the reboot standard/forget and repair etc and nothing seems to fix this.

  The confirmation that it is in fact a problem or advice would be appreciated!

  I have the same problem on iPhone 6s, iOS9.3

  Had no abandonment before that.

• disconnect issues

  Hello-

  Recently, I installed windows7, and when I play world of warcraft or just browsing the internet, I get disconnected.  I am currently on my windows updates and I've updated my dirvers.  When I rt click and fix it it resets my connection and im online, is the message I see when it's fixed "bridge default not avialable - fixed.  This problen was with high frequency during the last 2 days, every 3-15 min.  I have 2 ISP and if I switch to the second IAF I still get the same problem.  Is there a security setting, I've selected fixed.  I checked and created inbound and outbound rules to WF (rules for world of warcraft that is) and the problem still persists.

  Looks like two bad network card drivers or your router is left and right connections down, but I'll go with the former option if your previous operating system did not have these problems.