disconnect issues

Similar Questions

• HP Pavilion g6 - disconnected webcam / hand driver missing?

  Product name: HP Pavilion g6

  Product number: A3A09EA #ABU

  Dear HP support,

  My problem is as follows:

  A day that I realized that I can't use my built in camera more. I tried reinstalling original preinstalled software Cyberlink Youcam, but as you might assume if it worked - I wouldn't be here. Then I tried according to HP troubleshooting guide. The problem is that there is no category called "Imaging devices" at all.

  I can place two bets on what might actually happen:

  (a) I managed to remove the HP webcam 101 driver base. Is the exact name of the device: USB\VID_05C8 & PID_021E & MI_00

  (b) internal unit itself broke down (it has not disconnected issue of cord - made sure that myself)

  I think I could try to install base driver for the camera, the problem is I can't find a / can't find a reliable source. Can you send me / download for me? How to proceed in this case, do you have any suggestions?

  Hey @RacA ,

  Welcome to the HP Forums!

  I understand that the webcam no longer works on your laptop.

  Make sure that when you are in Device Manager you are hidden display devices. (View > show hidden devices.) If the webcam is missing, it is possible that the Acquisition of Image Windows service is damaged or does not work. To ensure that this service is on a start-up automatic and non-disabled.

  The CyberLink YouCam software only allows an extended webcam support and does not contain real pilots. Drivers are generic enough and come directly from Windows.

  I suggest you restore the laptop to a time where he worked, and if it does not reinstall Windows before you replace the webcam. To restore or recover tap the F11 key, while the portable lights to access the HP Recovery Manager.

  Hope this helps!

• BEFSR41 V 4.3 disconnection problems

  All THE firmware / drivers / etc are completely up to date.

  I have the router connected to a modem DSL Motorola 2210-02 (1002 firmware) in bridged Ethernet mode. The router is connected to my computer running Windows XP Professional x 64 SP2 and computer from my wife who runs Windows Vista Ultimate (32 bit). We have no problem with internet browsing via Firefox (and IE) and using most of the other internet software dependent if necessary (the P2P clients, instant messaging, etc.).

  Play us World of Warcraft and usually have no problems. Whenever we are in large groups (known as raids), we tend to have disconnect issues. The issue is not that we are disconnected from the servers of World of Warcraft, we are disconnected from the Internet completely. We use a Ventrilo for voice chat and it is disconnected at the same time. However, it is tyipcally only a "hiccup" that we are able to reconnect immediately.

  This happens if only one of us plays. Blizzard has been unable to help me find the problem, so I've resorted to posting here.

  I had this EXACT problem using the same router model (but the 4.0 V) two years ago and had found a solution in the configuration of routers. I don't remember what I did over the years, but because of this I know that the problem is somewhere in the configuration and not in the firmware / drivers / Server editions / incompatabilities / etc.

  Any idea is appreciated.

  Thank you

  ~ Darxide

  I put it to Keep Alive 180 second renew instead of Connect on Demand and it seems to have cleared up.

• Canon ip4000r wireless printer no. Longer answers after WRT54G2 Firmware Upgrade

  I posted here I was have disconnect issues so I updated the firmware from 1.0.04)is and the problem is solved. Just noticed that now my Canon printer will not work with any of the laptops. I worked right prior to the update. I know that MAC filtering must be out of work and it is. I tried to not secure and who did not. Any suggestions? I use 1 channel with mixed-signal and the router is located next to the printer.

  Solved. I pulled the plug on the printer and when I reconnected it it worked fine.

• using the same datamodel with SQL database QML in 2 listviews

  I am using the code for the sample application quotes as starting point. I try to call the same SQL database with the quote template to build a list in the top level of my application and then create a list to the next heirachy.
  For, for example, imagine a list of different types of quotes (funny, sad, happy, etc.) on the home page, then the list of people with their quotes on the 2nd level and their exact quote at the 3rd level. When I use the same quotesModel qml and asyncksource at the top of the list and yet once in 2nd list level I get disconnection issues connect to my SQL database. How would I fix this?

  You only need a data source class, but you will need multiple instances of it.

  The disconnect message means that the new connection is now that of the database of driving. Will there be other errors in the log?

• Failed to save to the Services CUVC-5110-HD10 - SIP

  I'm after disconnect issue with Adhoc TelePresence calls - after approximately nine and a half minutes I get an abnormal disconnect error MSG and the calls must be reset.  The call is made on my end and it happened yesterday in two different places.  I'm at a loss where to begin to look for information.  On the status page that SIP server has a red X that are associated to him, I was wondering if this may be a factor.  I have a configured SIP trunk. I use the code 7.2.0.0.1 on 5110, CCM, I use the version 9.0.1, CTMS, I'm running 1.8.2 TPM, I'm under 1.8.1 VCS, I'm under X7.2.1.

  Thanks for any help

  Jim

  Hi Jim,.

  It is a problem caused by a bug in the CUVC (CSCtl43708) where the CUVC does not properly implement the time-out value of session from the side of the Complutense University of MADRID.

  The workaround is to disable expiration of session on the CUVC support as shown in the image below:

  

  -Paul

• Issue of iOS 9.3 Bluetooth disconnection

  I noticed that * might * have a bug with iOS 9.3.  All my devices using bluetooth now seem to disconnect randomly when using.  All my cars, headphones, bluetooth etc. soundbars have met randomly ~ 10 second interruption in the connection during normal use.  Devices will reconnect sometimes, other times I have to turn off the accessory and start up.  What happens with a 6s and is verified as event at least 6 different various vintage accessories using bluetooth.  Everyone has noticed this after the upgrade to 9.3?  Before application of 9.3 I had never seen this error before.  I also had this happen with at least a helmet on my iPad Pro using 9.3 as well.  I did the reboot standard/forget and repair etc and nothing seems to fix this.

  The confirmation that it is in fact a problem or advice would be appreciated!

  I have the same problem on iPhone 6s, iOS9.3

  Had no abandonment before that.

• Satellite Pro A200 wireless issue sometimes disconnects

  Hello

  I have a Satellite Pro A200 with a wireless issue.
  I use home wireless. Every now and then while surfing it won't find the page. I try to connect via my VPN connection I have for the office.
  If you click Cancel, it will sometimes continue surfing very well but sometimes can not find the page.

  I disabled the wireless and connection is used hard and no problem.
  It would be desirable to re - install the drivers for the wireless?
  I think I've removed the software toshiba Wireless thing (forget his name) when I got it.
  So maybe that's the issue.

  Any help would be apreciated.

  Thank you

  Of course, it would be desirable to update the WLan driver in most cases it s WLan compatibility issue between card WiFi and router

  I recommend updating the driver WLan and also you can update the BIOS if a new version has been available for your laptop model

  Best regards & good luck

• Remote Desktop issues connecting from home to work the computer in Windows XP. Remote Desktop stops responding and eventually disconnects.

  Just around the beginning of July (2011) I started to have remote Office questions when connecting from home to work. If I minimize the connection for a while and come back later, it will be often does not. I'll have to hit the close X button several times before, he ends by abruptly disconnects. By the sudden I want to say that I don't get no dialogue usual warning that the session will be disconnected.

  Also, sometimes when I connect I get a white screen instead of a connection window.

  Anyone know if there was a Windows Update, or anything that can cause problems with RDP.

  I used to be able to connect perfectly without any problems.

  Thank you

  original title: Remote Desktop problems for the months spent on XP

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads

• Acer Veriton N2620G/disconnect keyboard issue

  We set up recently a few new Acer Veriton N2620G thin clients in our call center.  After you have configured an ICA connection, we discovered that if a user presses NumLock and Caps Lock, it disconnects the session... This can happen at any time... login screen, after that they were recorded in during some time... at any time.  We are able to reproduce this on all of our new Acer Veriton N2620G thin clients.  All our thin clients from Wyse existing work perfectly.  We used existing keyboards, we used the keyboards that accompanies the new Acer... same problem.  We configure RDP connections as a test and these function normally... they do NOT disconnect.

  I chatted with the support of DeTOS (OS on the thin client) and their level 1 is zero help.  They tried to transfer me to level 2, but I received a message that they are not open at this time...

  Light client info below:

  Acer Veriton N2620G

  BIOS version 2.15.1229

  Operating system: DeTOS 7.2.2 20130702

  Any help would be greatly appreciated.

  -Brian

  For the record, it was a problem with the version of Citrix ICA Receiver.  Assistance provided an update to the ICA client and he resovled question.

• Business leader knows the connection/disconnection/display issues

  Our VP of finance was recently provided with a new HP Probook 8770w. It has a docking of 90 watts and an SSD. She complains that when she shut the machine and detaches, then opens again the machine for meetings she can not get display drivers to detect other options to display as you reconnect to an another external monitor or projector. What is the best driver we can provide him and what other steps should take to ensure that it is able to disconnect/dock, sleep and display dynamically and smoothly? I'm the support office for this company engineer. I use HP almost exclusively and it would be useful to have a way to resolve this sort of thing (as I've seen before).

  Thank you.

  Sorry for the duplicate entry. I didn't know that the first had posted when I was asked to sign.

• Constantly disconnected - more issues as well

  Adobe CC me signs quite often.

  If I leave and launch programs often, I need to provide my password about 15 times a day.

  This is a minor annoyance, I have skip photoshop, illustrator and indesign in-between constantly.

  To make matters worse, though - I used it within 1.5 weeks - two of the times he is disconnected me he asked me to accept the General conditions after signing in (both at the time occurred when starting Acrobat Pro). After that I accepted the terms, he invites me to reconnect... to the trial version. -_-

  After that, all my programs run in trial version - to get out of the mode of trial he asks me a serial number (which I never received)

  I need to use the adobe tool cleaning to uninstall and completely re cc - download + install the suite cc thanks the CreativeCloud for return to normal program (as far as I noticed it, it is the only way to fix it) - which cost me hours of my day at work.

  As I can't afford to spend half a day of my office in time on this process once per week - are there patches for this correct (or methods to keep this bug occurs in the first place)?

  Thanks in advance for your help

  Chat now button down for the Activation and the deactivation of the problems can help

  http://helpx.Adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  or

  Sign by sign in http://forums.adobe.com/thread/1450581?tstart=0 can help

  - and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

• issue during the passage of the lighthouse of the trial to purchased Lighthouse I disconnect then connect and it says invalid serial No.

  When I try to go from the trail to the lighthouse to the lighthouse of the purchase I log on help and then connect.  It is said of the invalid serial number

  Reference: https://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  I hope this helps.

  Concerning

  Megha Rawat

• Issue of disconnection SSO

  Hello gentlemen,
  
  I have a little problem with the integrated SSO authentication scheme. I created a simple application to test and activated the built-in authentication scheme, Oracle Application Server Single Sign-On (Application Express as a partner Application).
  
  -Everything works fine, when I access the application, configured in SSO login page shows... but when I logout of the application created it does not work properly, I just enter the url of the app again and access them normally.
  
  My question is: can I create a logout feature to invalidate the session?

  Edson,

  There is here an exchange of views and some good advice from Anton: SSO authentication and the other post here, which underscores the importance of early identification of goals, like a logout URL in a configuration of authentication UNIQUE must be built so that it does what you want it to do: Logout URL for 9iAS SSO partner App .

  Scott

• External hard drive mounting issues on MacOS Sierra

  After upgrading to OS Sierra, I found that my USB3 drives, directly connected to my iMac end of 2012, turn off at startup. USB 2 disks are unaffected and connect properly. The only way to access my USB3 disks is to disconnect and reconnect every time I start the computer, then they are ok. I tried to reset the NVRAM, but it did not work. I found Os El Capitan until this issue is resolved.

  Do not mount or actually turns out always the system start? It was not clear in your subject line and content later, what was going on.

  Are they NTFS formatted drives? See the solutions frequently asked and answered forum if they are.