Issue of driver auto dial

I'm running X2.3 conductor and VCS X8.1.1, and I ran into a problem with the auto-numbering feature.  Below is a brief description of how I feel:

For example, I have an alias of the meeting, [email protected] / * /, which is configured with an automatic line [email protected] / * /.  All the rules of research are correct that an external endpoint can connect to [email protected] / * /, and in the event of conductor log, I see an entry to call [email protected] / * /.  But [email protected] / * / is not connected to the Conference.  After reviewing the microcontroller is in the Conference, I see a call to try a very long alphanumeric URI with the address of management listed instead of [email protected] / * /.

I deleted the configurations and re-created from scratch, but still the same results.  I have disabled HTTPS to see if that would help matters, but no joy.  So now I'm back setting up vanilla and post here in case someone else has experienced this problem and can provide advice.

Hello Cristian-

TLS is required as shown in the conductor deployment guide for every piece of infrastructure.

  • MCU on pg 16.
  • TP server on pg 20.
  • VCS on pg 22.
  • Conductor on pg 31.

Tags: Cisco Support

Similar Questions

  • Map network drive Auto Login password

    Windows XP mapped drive
    Auto login password when the computer is restarted is not correct and therefore prompts the user to enter.
    Self-opening worked before. Yesterday, the password for the server has been changed.
    I disconnected the old drive and created a new drive mapped with the new password and auto-connect on reboot option checked. Player features mapped correctly until the computer is restarted to indicate the user login box with the error message invalid username or password. Enter the password manually will connect the drive. It seems the automatic connection parameters have not last updated the new password and still uses the old password.
    (With disconnecting mapped drive, remap the process of training all our computers Windows XP I have this problem but our Windows computers 7/8 are all working correctly.)

    I found a solution to this.

    1 disconnect a mapped network drive.
    2. connect a network drive, but are not select Reconnect at startup.
    3. restart the computer. The mapped network drive is not there.
    4 map the network again drive. This time select Reconnect at startup.
    5 restart the computer. The mapped network drive will be there and activation it will automatically connect with the password.

  • Issues of driver for the scanner Epson WF 3520

    Hello

    By Epson support, I was told that what follows is a Microsoft issue.

    I have a printer Epson WF 3520. I use Windows 7 64-bit. I tried the drivers to load the disc that came with the printer / scanner and also tried loading new drivers from the site of the such Epsom as advised by them.

    I did this a lot, a lot of time uninstalling and deleting the files appropriate between attempts.

    Support very good printer drivers and I can print wireless with no problems.

    But I can't load the drivers scanner no matter what I do. Whenever I try, I get the message "cannot load drivers scanner.

    Successfully, I loaded the drivers and used the printer and the scanner on two other laptops - a running the same version of Windows 7 and Windows 8 running.

    Any help would be appreciated.

    Concerning

    Try turning off the automatic updates of windows update first.

    Start, right click on computer/properties/Advanced/settings/device installation control panel - not let choose me and install win update never save the changes.

    first uninstall previous driver of scanner software and make sure that there is no registration in start/printers and devices. Then install the latest driver of Epson.

  • Issue troubleshooting, driver and keyboard.

    Hello

    I troubleshoot-made my Windows 8, detected these issues as follows.

    Miniport (Network Monitor) Wan #2 has a driver problem
    Miniport (Network Monitor) Wan #2 has a driver problem
    There is a problem with the wide AREA network (Network Monitor) #2 Miniport driver. The driver must be reinstalled.

     
    Reinstall the device driver Completed
    Problem with the PnP devices
    Problem with the PnP devices
    There are problems with some devices PnP. Windows will take additional steps to continue troubleshooting these devices.
    Detected
    Update of Windows configured to never install drivers
    Update of Windows configured to never install drivers
    The driver updates are not installed automatically when detected by Windows Update.
    There is no question
    Problems found Details of detection
    6 Miniport (Network Monitor) Wan #2 has a driver problem Not fixed
    There is a problem with the wide AREA network (Network Monitor) #2 Miniport driver. The driver must be reinstalled.

    The device information
    Name: Miniport (Network Monitor) Wan #2
    ID: ROOT\MS_NDISWANBH\0001
    Error code: 31
    Reinstall the device driver Completed
    There is a problem with the wide AREA network (Network Monitor) #2 Miniport driver. Reinstall the driver may resolve this issue.
    Problem with the PnP devices Detected
    There are problems with some devices PnP. Windows will take additional steps to continue troubleshooting these devices.
    Potential problems that have been verified Details of detection
    Update of Windows configured to never install drivers There is no question
    The driver updates are not installed automatically when detected by Windows Update.
    Solve problems with a USB device

    Can someone help me solve these problems?

    Thank you

    Arif Bellah

    Hi Arif,

    Thanks for the reply.

    Are you facing any problem during the installation of Windows updates? If Yes, do you have any error codes?

    Method 1:

    I suggest you to download and install the latest Chipset driver on the manufacturer's Web site and check if it helps.

    http://us.gateway.com/GW/en/us/content/drivers-downloads

    Method 2:
    I suggest you to use Visual keyboard to type the password on the login screen and check if it works.

    Use the keyboard to the screen (OSK) to type

    Method 3:
    If the issue occurs when you use the keyboard on the screen, this could be a problem with the keyboard. I suggest you to connect an external keyboard and check if it works.

    Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

  • Dell XPS 13 TrackPad issues after driver update

    After updating my XPS 13 Cypress Ultrabook drivers for newer drivers published yesterday on the Support from Dell downloads page, every action (although still active) have stopped working. The trackpad itself always seems to work fine after the update of the driver, but no gestures work longer. They all worked just before the update.

    I tried the normal game of toggle, restart, update. But if someone has had this problem or knows how to solve?

    Thank you

    After much research and with the help of Terry B with send me a second XPS 13 and taking my previous one back to the laboratory, I found that the issue is actually with my Antivirus software. I use AVG, and I am at a loss to explain how, but I can restore scrolling and other gestures to uninstall. I can reproduce again lose its Setup again and perform a restart.

    I am at a loss as to what why, AVG allows the driver to start and work properly by any other measure, however, I'm on the verge of scrolling of web pages for a new virus scanner!

  • The language issue with driver download page

    Why when I put in place in ENGLISH get taken to download messages in DUTCH?
    And why when I click on the link for the FRENCH in the pages BE not need me at the same point?

    I try to download the updated drivers and can't seem to the right place.
    It's REALLY annoying that Belgian by default without asking DUTCH sites of preferences.

    No wonder that he didn't is these linguistic tensions in the country

    Hello

    Are you talking about the Toshiba driver page?

    I always download the drivers from page pilot European Toshiba:
    http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

    There you can select your model laptop and the exhaustion of the language

  • iCloud drive a replacement of Google Drive: auto synchronization of folder?

    Because I like to try to stay in the Apple ecosystem as much as possible, I am finally moving to an investigation on iCloud Drive on my Mac as a substitute for Google Drive, which I am currently using.

    Why I use Google Drive: so that my documents on my Mac is accessible when I'm on my iPhone and iPad. (Pretty good the way Drop Box works, I think)

    My question: is it possible to have My Documents folder on my Mac automatically sync with iCloud Drive, so that if I work on my Mac and create a new document (which can be found in the Documents folder), it will be automatically uploaded to iCloud by car?

    I know this must be a matter of common/simple, but my research could not get a satisfactory answer.

    Thank you

    If you have enough room on your iCloud Drive create a new folder called "Documents" and place it in the iCloud drive:

    Now select and do drag and drop these elements in your Documents/Home/users folder you want to synchronize with all your devices in the folder Documents/iCloud .

    Details on the manner in which the works of reader iCloud describers here: iCloud Drive FAQ - Apple Support

  • HP never will issue a driver Windows 7 for Color Laserjet 3500

    When I did installs it of Win 7 months ago, my 3500 worked and could be shared.  When I had to do an install of Win 7 a few days ago, I lost the support of this printer.  All the facilities were "upgrades" to XP.  He worked for months.

    I must be printing color later this week.  My HP laserjet 5000 printer has been supported for 15 years.  The 3500, 6 years then nothing.  Everyone at HP can give me a good reason to buy their printers never again?

    PS, none of the workarounds posted here work for the 3500.  Note that none of the 3500 inquueries are "resolved".

    So, no reason to not to drop this 3500 in a trash can and go Ricoh HP forever?

    And I guess my other question is answered by omission.

    HP will selectively issue loyalty or product drivers for OS updates, based on cost considerations rather than questions of customer lifecycle.

    The positive side to that is that I'll save a lot of money in the future, now that I know that HP loyalty is one-way.  Now I can shop strictly on the life-cycle cost and performance!

    Thanks for all the help.

  • [ISSUE] Network driver HP Pavilion 15-n023sy wireless

    Hi all!

    My laptop is HP Pavilion n023sy 15. There is no driver official support for Windows 7 for this laptop.

    I managed to install Windows 7 64 x on it, with the necessary drivers from other distributions of the HP series. And the only question is left - wireless network adapter. I installed the driver Qualcomm Atheros WLAN 9485 without problem ("Device Manager" presents, it's working properly "), the card is activated. BUT it is there no 'Wireless network search' icon in the status bar. When diagnosing the adapter, it says... «the adapter problems...» "and barrulet shows yellow exclamation mark inside. It seems he's trying to find any router in the area, but can not (Control Panel-> network) and Internet-> "Add a wireless device to the network".

    I have a hundred times already uninstalled the driver of it, installed a different driver versions; tried to install drivers RaLink and Realtek WLAN, which were all.

    Could you advice me, guys, what should I do and how to solve the problem with the wireless network card?

    I really appreciate your response X)

    Hello:

    See if this driver works...

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359422&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118499_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  • HP 14-d008au: 14-d008au issues of driver on windows 7

    PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01

    PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C

    PCI\VEN_168C & DEV_0036 & CC_028000

    PCI\VEN_168C & DEV_0036 & CC_0280

    Mr President it is the missing drivers hardware ID

    Hello

    Install the WLAN driver from the following link.

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_128686_1

    Kind regards

    DP - K

  • DVD - RW won't read disk 2 of the installation of the game AION (all no longer then my drive auto ejects cd)

    Hello people, I thank you advance for reading and considering my problem.
    My problem is trying to install the AION game.
    Installing the game is separated into two discs. Disk 1 installs perfectly, when you are prompted to enter the disk 2, I go into the drive, then my DVD - RW (AD - 7203A) behaves as if the bed, she starts a loop a sound treatment, all at the same time everything is unresponsive.
    I tried to install other games and they install fine, and I JUST bought this bloody game, not visible scratches or anything.
    I tried to go in my computer and my drive D:\ to explore and perhaps to copy the contents of the CD to the hard drive, right click and yet still once the GAL from the computer for a good 20-30 seconds, unresponsive, then when its over with non-response, if I try to open explore or basically do anything with the D drive (this is my dvd - rw) it automatically ejects the CD. Any thoughts? Download the game takes 7 to 9 hours, and I wanted to play as I bought earlier today... sigh help! Laughing out loud

    Hey Manoka:

    Do not know if you purchased a boxed product or digital download of Aion; in both cases, I would give the same answer.  Unfortunately, I think you have a faulty drive.  If you bought a physical copy, it could be a bad pressing or even a certain flaw surface, that you can not see.  If you burned the disc and they tried to install (don't think you would have to do what any downloaded game should install directly from your hard drive), then it could be any number of defects.

    For physical purchase: I would return the disc instead of purchase.  Most places have no problem taking software back (usually within 7 to 30 days), even if open for disk defects.  I expect that they would simply replace your copy of the product by a new one.  WARNING: most of the time, you will need to return not only the drive defective, but full product: all disks, packaging, promo codes, etc...  Be prepared to do WHAT you've got, reception included, when you try a return.

    For digital download: three options really.  (1) If you have saved on your hard disk, try to install directly from where you saved the file. (2) If you have to burn a disc, use a new blank disc and make sure that you choose the option "error checking" then the engraving; or (2) re - download it from your drive hard/burn provider and reattempt digital process.

    I did a search in the official technical support forums Aion and did not see someone else pointing out faulty disk problems.  I always recommend you take advantage of all the Aion community, as it was pretty impressive.  Here is the link: http://na.aiononline.com/forums/

    If these steps do not resolve the problem, please do not hesitate to reply to my post.

    Good luck with Aion - seems to be a very promising MMO.

    Justin

  • ATC-710-ES61 Horrible Internet high speed - Win10 issue or driver network

    Brand new TC-710.  Windows 10 pre installed.  Internet connection should be up to 5 MB/s and I only get just below 2/s.

    Internet provider came out to check the modem (I'm on a wired connection, btw).  Their laptop connected to 5 Mbps but the desktop PC showed 1.8 its best test.  They had no solution, and my window to return is in place in the coming days.

    Is this a problem of Windows 10 which can be easily solved, or are there problems with the netword card adapter / (what's his name).

    I will get the owner (my father in another city) to turn off the automatic update, uninstall mcafee bloating and try the test of speed on chrome and firefox to make sure it isn't Windows Edge for some reason any.

    Any other owners with this question or someone can suggest a fix or a way to test his modem/network adapter (sorry, I don't know what it's called).

    Also, regarding the modem/adapter - that this PC comes with - I want it is driver/firmware or anything that is up to date and not the cause.

    His old computer was a relic of Windows Vista, but the speed was always close to max it's so this thing with all his power etc is not good for him like that.

    Thank you

    OK, let's wait for a response on the Realtek driver.

  • XPS 8700: Issue of drive configuration

    On my 8700 XPS running Windows 7, I intend to use an external drive connected to one of the SATA motherboard ports eSATA occasionally, but the external hard drive is not permanently attached and running.  Which of these wirings of disk configuration is not OK:

    Scenario one:

    • SATA 0: hard drive
    • SATA 1: eSATA, but normally no drive connected.  Sometimes an external drive would be attached. (this should be enabled/disabled in the BIOS every time?).
    • SATA 2: optical drive

    Scenario 2:

    • SATA 0: hard drive
    • SATA 1: optical drive
    • SATA 2: eSATA, but normally no drive connected.  Sometimes an external drive would be attached. (this should be to be enabled/disabled in the BIOS everytime?).

    Thank you!

    Hi Lone Star,

    It should make no difference. However, you can assign a drive letter on the external drive, so it does not change other drive letter assignments when you connect the eSATA drive.

  • Auto Dial-Up Box appearing

    Hi, I have this problem with my Windows Vista; I use an Inspiron 1501. The problem is that when the pages don't load, my dial-up box appears automatically, asking me if I want to connect. This is not really a problem if he did not appear permanently on some websites that load perfectly fine. It's also embarrassing when I disconnect Internet and gmail is open, and he keeps trying to connect to gmail talk, which makes dial-up box appear... If there is a way to disable to autoappearing, please let me know.


  • Printable PDF issues with drive 11.0.03

    I've upgraded to the 11.0.03 drive and can no longer print .pdf files in Mac OS 10.8.4 I get the print dialog box, but when you attempt to print get a pop up "the document could not be printed", and then "there is no pages selected to print.

    Once it goes to the dialog box print, you have essentially left drive and work in Mountain Lion. This may be a drive setting, but when you have installed the reader XI he retained all the preferences of X, then it is unlikely that the only installation did.

    You can try a "clean install":

    Download a trial of AppZapper.
    It allows to delete files reader XI and all preferences and the .plist.

    Download and reinstall the XI player and see if it changes.
    If it is not it is more likely the printer.

Maybe you are looking for

  • How to bypass disable systems

    I have a HP intel Celeron laptop with windows 7, that my battery was dead after non-use for awhile so I bought one lying replace the battery and now when I turn the computer on a blue box comes up with "power on password or administrator password. Af

  • vs17e monitor - lock OSD

    When you press one of the buttons, I get the message "OSD Lockout" & the only thing I can do is turn off after you push the power button twice.  I can't access the menu or even change the volume.  Is anyway to fix this?  Help, please!  Thank you!

  • Pavillion 500-424: card without wireless/Wi-Fi number!

    Hello!So I upgrade my PC Windows 10 and then realized that I couldn't connect to the internet. So I downgraded to 8.1, and I couldn't always connect to the internet. I ran Recovery Manager and installed the Realtek WLAN drivers. It is installed, and

  • VISTA PRODUCT KEY PROBLEM

    Hi I bought a disc of windows vista 2 years ago from future shop, in case my laptop goes down and he is down and there is 1 month, I downloaded this disc it has worked well and now he wants a new product key and I already buy a product key when I bou

  • Do a right click to create a new folder has stopped working

    Do right click to create a new folder has stopped working and displays 'empty' in the dialog box or displays "new portfolio." And the selection of the 'new folder' icon does not work. This will require rehabilitation at a previous time where everythi