Issue troubleshooting, driver and keyboard.

Similar Questions

• Reinstall the cd rom driver and keyboard filter driver.

  I have a hp dv6-1378nr entertainment notebook running windows 7 64-bit pre-installed.  I keep getting messages that say I have a missing cd-rom and the keyboard filter driver.  I tried to download these hp nothing helps support.  Help, please.

  Hello

  Have what softpaqs you tried?

  You can try the aso the FIXIT MS to see if that helps

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Here is the driver KYB

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-82248-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 4035647 & sw_lang=.

• HP ENVY m6-k010dx Sleekbook: I need real link to buy the new hard drive and keyboard

  I had water damage on my laptop fried my keyboard and my drive hard while I was looking to replace myself and I must not pay 260 repair just to change the keyboard and hard drive. I have the part numbers I need, but for some reason I can't buy them either they sell is no longer or I can't do that via mobile, but I don't have a computer now so... Yes any help?

  It should be 7 mm. I looked and found a 7 mm more than 750 concerts on newegg.

  Here is a 1 to on eBay:

  http://www.eBay.com/ITM/HGST-laptop-1TB-5400RPM-SATA-III-hard-drive-32MB-Z5K1000-1000-7mm-ultra-thin-/252019986050?hash=item3aad8fce82

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Mouse and keyboard suddenly crashes

  Start the computer and everything works normally (I have Win7 btw.). After some time, it can be for 20 minutes, or 3 hours, is not issue, the mouse and keyboard freeze, stop working. And there is a noise as if I disconnected something, I check the mouse and the hubs of keyboard and still nothing. I unplug them, but no sound, I have them and not of his new CAP.  I have PS/2 hubs, or something like that. What the more interesting, than other devices, like a controller or a video camera works normally. Please, help!

  Hello

  (1) when you are facing this problem?

  (2) remember to make changes before this problem?

  (3) what is the brand and model of the mouse and keyboard?

  I suggest you, refer to the article below and follow the instructions provided, check if it helps.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  If you have additional questions, feel free to post. We will be happy to help you.

• How can I restore HP Quick Launch and keyboard filter driver after upgrading OS to Win7?

  I've recently updated my windows vista Home Premium x 32 to windows 7 Home Premium x 32

  now, I was aware that drivers wernt going to be supported but had clicked next and now my Quick launch buttons do not work, or my keyboard filter that when I run a troubleshooting tool to find wat is wrong with the problem, it says not installed keyboard filter driver and I installs the latest drivers from HP.com is my ENE CIR driver Buttons to quick launch HP recommend updated all the HP.com drivers on my support page and pilot books, my laptop is A HP Pavilion dv6 Notebook PC product number 1203ax entertainment series

  Please help me correct this problem have downloaded and uninstalled the drivers and still not fixed am very frustrated at this point

  Hi all here is the method I had issue it used to fix my HP 3D drive guard was not install so I went to my device manager and expanded the system properties then clicked on the HP mobile data protection sensor and vivid after all calls from fone to HP and not fixed I took a punt and a good to and driver rollback selected then entered my configuration of sws in c: / and found the player 3D HP installed guard finished without error and restarted and now its fixed try this as a solution if your had the same prob as me

• keyboard driver and the mouse does not, uninstall driver does not work, any ideas?

  Just bought a sony vaio and have the driver of keyboard and mouse not working, uninstall the driver does not work, no idea how to solve this problem

  Hello

  Exactly how you are trying to install the driver?

  We will analyze and identify the cause of the problem. You can connect a keyboard or an external mouse and check.

  Method 1: Hardware store.
  

  Run the troubleshooter of material and check if it works.

  Follow the steps to run the Troubleshooter:

  a. press the keys Windows + C on your keyboard to show the charms.

  b. type Troubleshooting , and then clicksolving problems under settings.

  c. now, type Hardware Troubleshooter in the optionSearch .

  d. click convenience hardware store to run the troubleshooter.

  Method 2:

  You try to install the drivers on the manufacturer's Web site and check with the question.

  http://www.Sony.co.in/section/support

  Note: Search the driver by using the model number and download the latest driver.

  Reference:

  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-in/Windows-8/why-isn ' t-windows-conclusion-device

  Hope this information helps. Response with status so that we can help you.

• I went in lightroom today and it can't find my photos. I bought an external hard drive and copied some elements but did not cut their.  I did a back up on my external hard drive but didn't budge them. I did the simple troubleshooting and I

  I went in lightroom and can't find my photos. I lost the link before and did the right click to find and they have been found, but it's different.

  I bought an external hard drive and copied some elements but did not cut their.  I did a back up on my external hard drive, but even once did not move them. I did the simple troubleshooting and it doesn't work.  I'm trying to find the original by right clicking the? on the folder LR and once I find the file it tells me that Lightroom has this file already in the catalog - and I want to merge. I tried one and it disappeared or moved. Help!

  Use the file Explorer to see if the images are still in their original location. I suspect that move instead of copy them. This can happen if you drag you the.

  I found that it is best to use either right click on a file or folder name and select copy then right click on the drive-destination folder and select Paste or use keyboard shortcuts to copy and paste folder and files from one disk to another. The keyboard shortcuts are the CTRL + key C to copy and Ctrl + V to paste in the selected destination folder-drive.

• Mouse and keyboard no longer work after fixing drive dvd - Satellite A100-147

  My DVD Player wasn't working, so I fixed it with the help of some advice from a forum: go to regedit to remove the 'previous' and 'high' or something, I have a catalog specified.

  But then the keyboard and the touchpad is dead in Windows. Nor can I use an external keyboard and mouse.

  I tried to start it in safe mode and with the last settings that worked. None succeeded. Apart from the fact that the keyboard actually works to make choices, therefore, a question Ms.

  Ideas/fixes would be greatly appreciated.

  Computer: Equium a100-147
  OS: XP media center w/sp2 (I think)

  Maybe you deleted the upperfilters wrong or additional / lowerfilters?
  The correct key is {4D36E965-E325-11CE-BFC1-08002BE10318}

  Boot safe mode.
  Go to control panel-> Add/Remove Programs control
  Uninstall all software Mouse/touchpad/keyboard/logitech that can be installed
  Go to Device Manager
  go to view - > click on 'show hidden devices '.
  Delete all devices under "mice and other pointing devices" and "keyboards".
  Reset.
  XP should detect the mouse and keyboard and install the drivers.
  Download and install the driver for the touchpad to the A100 section drivers on the Toshiba site

• Missing mass storage controller and keyboard filter driver

  I have a HP Pavilion dv5215us laptop that I just installed Windows 7.  I'm missing the drivers for the mass storage controller and keyboard filter.  I tried to download on the HP site, but it seems that there are no drivers for this computer/Windows 7.  Is there anything else I can do?

  What do these drivers?

  Thank you.

  Suggested by Paul drivers are compatible drivers the best suited. Please try them and let us know the status of the issue.

• Reinstalling the driver for keyboard and mouse

  Re: HP Envy 17 t-3000 CTO Notebook PC

  I want to reinstall the keyboard driver and mouse of origin. I have the original disks - how can I do?

  Thank you

  If you are talking only of keyboard and mouse, then it does not require additional installation such that the computer will be installed automatically. In addition, you can install this software:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111895-1&cc=us&DLC=en&LC=en&OS=4132&product=5180698&sw_lang=

  ALSO

  Try to install HP Support Assistant that will automatically download and install updates/drivers:

  HPSA link:

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html

• is there a single mouse driver to carve microsoft ergonomic mouse? The "Mouse and keyboard Centre 2.3" driver/software is not compatible with my other keyboard...

  Hello!

  So I went on the microsoft Web site to download the software/driver for my "Microsoft sculpt ergonomic mouse", but is the only driver/software they listed the "mouse and keyboard Centre 2.3", which seems to be for their mouse and keyboard...» I tried to install, but after installation than my other brand non-microsoft (mark i-rocks) 2.4 ghz wireless keyboard Connect is more to his receiver and I am unable to use the keyboard. I tried resynciing and everything but nothing works only as long as this "keyboard and mouse center 2.3" driver/software is installed, so now I have to uninstall that and just use the regular driver for the "microsoft sculpt ergonomic mouse" I have, so I can use my keyboard...

  I want to know, is there another older version of mouse only driver/software that I can use with my "ms sculpt ergonomic mosue?  Maybe the latest intellipoint mouse driver would work? What is the latest version and how to find?    or only the "keyboard and mouse Center 2.3" works with this mouse?  so in this case, I have no other choice than to use the generic mouse driver?

  Thanks in advance for the help!

  lendbz

  I finally thought to it. Apparently, when you install the software/driver "Mouse and keyboard Centre 2.3" for the "mouse sculpt ergonomic microsoft", it will install both the driver for mouse and keyboard correspondence pilot as well, even if I only have the keyboard.  I tried this software even with my old microsoft natural wireless laser mouse 7000 and time that he installed only the mouse driver. I'm guessing that the nano-receiver for the mouse ergonomic sculpt can receive both the ergonomic keyboard and ergonomic mouse? .

  If the software installed one "microsoft USB dual receiver Wireless Mouse" under "Mice and other pointing device" in the Device Manager and a "receiver double USB microsoft wireless keyboard' under 'keyboard '.  What I did is simply to go into the Device Manager and uninstalled the driver "microsoft USB receiver double wireless keyboard" and check the box to "delete the driver for this device" so that the keyboard driver will not return and be a pilot and leave just installed microsoft mouse, so now I don't have that the "microsoft USB dual receiver Wireless Mouse" and the generic driver keyboard "HID Keyboard Device" in Device Manager to the the microsoft place unwanted, one, now I can go ahead and install any brand wireless/wired keyboard and the microsoft keyboard driver no longer interfere with it.

• Recovery of DNG issue: I have photos stored on an external hard drive which have previously been imported into Lightroom and converted to DNG.  The laptop on which I was running Lightroom died and I had to replace the hard drive and rebuild the

  Recovery of DNG issue: I have photos stored on an external hard drive which have previously been imported into Lightroom and converted to DNG.  The laptop on which I was running Lightroom died and I had to replace the hard drive and rebuild the computer.  In the process of my Lightroom program and catalog related to these images have been lost.  When I re-associate these photos with my new installation of Lightroom and a new catalogue is there a way to retrieve the keywords or other changes or metadata catalogue Mountaga?  Is any of this information embedded with the imge DNG file or was it only in the cataloght lost on my failing hard drive? I re-import just as if it were new images with no prior treatment of Lightroom?

  By default, LR saves all changes in the catalog, and that applies to any type of file.

  Optionally, you can save changes to the file as well, for raw files owners, this will create a xmp file - for DNG that changes are going to be cooked in the file, without additional xmp file.

  But it does not default. Go to the catalog and parameters under the control of metadata automatically save changes to XMP.

  Unless you do this, the changes are saved only in the catalog.

  Hope this makes things clearer.

• Frozen, paved touchscreen and keyboard on HP Pavilion dv6-3225dx Entertainment Notebook

  Extremely frustrated I looked and tried to find a solution without success. When the laptop starts up, it gets to the login screen, I wouldn't be able to do anything at this time there but I can connect because I a reader of fingerprints, there, I'm 100% dead in the water. The only way to stop is to hold down the power button. When the computer is starting up, I function touchpad/keyboard, I can escape the boot options, BIOS, repair, etc., and have normal features while there, but not in safe mode. I ran SFC with orders several times, chkdsk with orders several times, nothing changes. SFC said he found problems, but wasn't able to fix all of them and the last chkdsk finds nothing wrong.

  Here are the events leading to:

  * had errors of disk with bad sectors in the old drive hard (could not repair)

  * clone old hard drive to a hard drive nine (there were errors but the new hard drive booted and worked for the most part correctly)

  in trying to try to repair the installation files missing for applications and other small issues, I ran troubleshooting, updates, chkdsk, sfc, etc removed various applications and added some, nothing worked. I installed Revo uninstaller to remove Kaspersky Internet Security because it is the MOST tenacious application to remove I've ever known. The reason I remember it is because I went through my computer to pick up the remaining files even after Revo because Kaspersky was always after the re-install and uninstall again. There are some files in System 32, who had kaspersky attached to its description. I stopped to run and deleted. They were close kb files and after searching for files to remove, I myself remember at the end of the post it says that it would not remove a certain file beacause you wouldn't keyboard functionality. I made sure that I don't have, but I can't help thinking now that of the 6 files, I deleted (some of them core) can I have deleted the files of mouse and keyboard by mistake.

  * The last time I had a functional touchpad/keyboard under Windows, I ran sfc/scannow damaged = d:-/offwindir = d:\windows started at the command prompt. I got the same message that it found errors but did not set all. So I ran chkdsk /f /r from the command prompt start. When I got back to my computer after a few hours, I restarted and no longer had a touchpad or keyboard.

  I'm in the arms and extremely frustratd because I believe that I tried absolutely everything to make them work again. I hope that the only option I have left should format and clean install. I did not have a full upward and can not get a fully executed at this stage.

  Help, please! Thanks in advance for any suggestions and help that you may be able to provide, it is much appreciated!

  The following link leads to the support page of my laptop.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=5051461&LC=en&cc=us&DLC=en&lang=en&tmp_track_link...

  At this point, you need to perform a system recovery to return to the factory-installed state. SFC is not able to solve a problem of file system indicates a deeper problem that could work only a new installation. The only other option would be if you had a full Windows disk for your system to perform a repair install, but the OEM computers do not come with a disc of the operating system.

  Before continuing, let's check some things because I am sure you want to keep as much data as possible.

  You still have the cloned disk image? It sounds like the keyboard and the touchpad worked after the image has been loaded on the new hard drive. Is this correct?

  Something has been added since the image has been restored on the new hard drive? (photos, music, personal files, etc.).
  Part of the process will be to restore the image of hard drive to external copy of all the files you want to keep. As it is, a clean install will erase everything and a defective hard disk image would give the possibility to save anything in the image on an external drive or a drive.

  What is the new hard disk? As the brand, model, size, etc.

  You have the recovery disks for your system? This could have been done when you got the system or ordered from HP. either all should work.

  Another option to backup your files may be to use a live CD of Linux that has been done using another computer. Are you comfortable with Linux? This method is certainly not for everyone and I am not able to provide step by step instructions, but it's another option to save files.

• Windows 7 screen freezes, freezes mouse cursor and keyboard freezes.

  Hi all

  About a month ago my internet kept cutting at about 02:00 in the afternoon - even if my BThub said it was a signal - and my internet access would not return until 05:00 sharp later that day here. This went on for about two weeks, it doesn't happen too much now, however, recently, something happens...

  I have a desktop HP Pavilion s5000 and all day - every day - not only freezes my screen, if I'm online or simply type in a Word doc, but my mouse cursor and keyboard freeze too, all at once. It's as if all of the computer crashes, and the only way I can "unfreeze" it is cutting off the entire batch to the switch. In this case nothing three times a day to ten times a day. Can someone tell me what could be the problem and how I can try to solve it? I did a system restore, to restore the PC to a date earlier, I did this about five times now, but the problem persists.

  Many thanks in advance,

  Danni.

  Hello Danni,

  Thank you for reaching out to us to the Microsoft Community Forum.

  When your computer hangs or freezes, it is disruptive and can slow you down. There are a few reasons your computer might hang, freeze, or crash. Try the following common methods provided for in article below as a first step to solve the problem.

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Also as you use HP computer, you can try the troubleshooting provided in the link below steps and check if that helps resolve the issue.

  Computer hangs or freezes (Windows 7)

  Note:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Important:

  In case you follow ' step 7 "in the above link from HP that speaks to recover the computer to factory settings then you will need to contact HP support and we also recommend that you back up all important data to an external drive before recovery of the computer to the factory settings.

  Hope that the information provided will help you. Do we know the State of the question, so that we can help you further.

• When I work on my sys after every 15 min to 20 min my mouse and keyboard does not work

  Hi all
  Please can someone give me a good answer

  When I'm working on my sys after every 15 min to 20 min, my mouse and keyboard work not and totslly my sys cling...

  Hi Suresh,

  Thanks for posting your query in Microsoft Community.

  According to the description of the problem, it seems your keyboard and mouse stops working, and also Windows 7 crashes.

  I will certainly help you in this matter.

  1. What is the brand and model of your computer, the keyboard and the mouse?

  2 have had any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Update the drivers for the keyboard and mouse.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Follow the steps in the link.

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286

  Using the windows-related issues feel free to post on the Microsoft Community Forum.