Issue of financial model

Similar Questions

• Scroll the issue in the model of "Influence".

  Has anyone else encountered a problem with scrolling on the phone model "Influence"? I had a website finished and thought when he went to live scrolling would not so nervous. When you arrive at the end of the page he pops up again, but this is not always the case and it is not always at the same point on the page? I restarted the site and finished, it's still once, not deviate the parameters models, scrolls etc. and it always behaves very nervous. Can someone please advise as to the address / solve this problems? I've asked this question before and was advised to adjust the effects of scroll, but as I had not touched these that initially I was wondering was there problems with the model? I would really appreciate some advice.

  Kind regards

  CT

  I created a test with the same model site but see no problem scrolling: http://influence-test.businesscatalyst.com/index.html

  Please let me know if you make reference to a specific part of the page, also if you have than a html embed trying to remove this and then check, also reset settings scroll to check.

  Thank you

  Sanjit

• Acrobat Pro 9.5.5 - issues in several model page

  Hello

  I have a document as well as 2 pages I created as a model, if I try generating the pages. I have a problem to find the correct syntax to get the two pages of my 2 page PDF to spawn.

  This is the Javascript code that uses I found on the site of planet pdf.

  var expTplt = getTemplate ("Client1");

  expTplt.spawn (numPages, true, false);

  Page 1 of my pdf is the model 'Client1' and the Page 2 of my pdf is the model "Client2.

  I tried to use it under the command of getTemplate

  ("Client1", "Client2") = this fails

  ("Client1, Client2") = this fails

  ("Client1" ") + ("Client2) = this fails

  I looked at the documentation for the Javascript API, and I could not know what the correct syntax.

  It is possible to have two pages to reproduce?  If I just "Client1" in, Acrobat fight page 1.

  I am at a loss, and any help would be appreciated. I'm not much of a programmer at all.

  Thank you.

  Simply duplicate the code that you (assuming it works):

  var expTplt1 = getTemplate ("Client1");

  expTplt1.spawn (numPages, true, false);

  var expTplt2 = getTemplate ("Client2");

  expTplt2.spawn (numPages, true, false);

• LR4 issue of user model Module printing

  I would like to create a template user / custom, such as the one below, where I can drop a large image in a smaller cell AND THEN move the image / culture until I get the best fit.

  Is it possible to create templates with locked cells that have the ability to change/move the image after that that it is inserted?

  Thank you very much

  Andrew

  

  Yes, it is possible.

  (1) make sure that top Module print to the right, under the Style of layout you have selected . A print with different images is possible only in .

  (2) you can adjust / change one of the prefabricated models based on your layout. Choose for example the model or . Both have 3 cells for photos.

  (3) given that you want to your layout in landscape orientation, go lower left and select and . Orientation in the main window will change to the landscape.

  4) click in one of the horizontal cells to make small squares to the outline visible, - on the right side, under click . Do the same with the other horizontal cell.

  (5) then click in a cell and dragging it to the location desired. -Resize handles, i.e. the small squares, or entering the cell size / Adjust selected cell.

  (6) do the same thing with the other cells - drag and resize - until the layout is to your liking.

  (7) then left onto

• issue grouping RTF model

  Hi all
  I have a requirement as below.
  
  The report header section contains: order number,.
  Email_address,
  ..................
  
  the part of the body of the report contains the details of each order as
  
  Item number, name of the option
  ...
  Yet once the line section is based on the Group another, so it must be repeated for each group.
  
  My requirement is in the header for each order section and your email I need to repeat the whole header and a command line.
  
  Ex: Header: Order_number: 101
  E-mail: abc & gmail.com
  Section of the line:
  
  Here we have another group like demand_class
  
  DEMAND_CLASS: 'ABC '.
  Item1: abc,
  Article quantity1: 1
  
  DEMAND_CLASS: "DEF".
  
  Item2: abc,
  Article quantity2: 1
  ................
  
  
  Header: Order_number: 101
  E-mail: def & gmail.com - same data by e-mail only changed
  Section of the line:
  
  Here we have another group like demand_class
  
  DEMAND_CLASS: 'ABC '.
  Item1: abc,
  Article quantity1: 1
  
  DEMAND_CLASS: "DEF".
  
  Item2: abc,
  Article quantity2: 1
  ................
  
  
  
  
  
  
  
  Another section: to display the total calculation for each category of application for an order.
  
  
  My requirement is to repeat the same data for each order and your email address.
  
  Please help me on this

  example of output transmitted. Check your Inbox and let me know the necessary corrections.

• Compaq CQ58 - 299EV model of updated video card and driver for win7 64 bit and ram upgrade

  Hello

  Since I was my compaq laptop (about a year), it was windows 7 64 bit operating system inside, even if the manual was for windows 8. So, when I looked up initially for up-to-date drivers I couldn't find support for win8, but I chose not to because I saw tons of compatibility issues with this model of laptop. Well I don't want to update soon, so I would like to know what are the latest drivers I can find for my model for win7 64-bit.

  So, what model of video card has it built in (it just says: "Intel(r) HD Graphics"), so I can find the right drivers for it?
  Also can I put my ram? There are now 2 GB.

  Thanks in advance.

  Since it is a Celeron processor it comes:

  Intel HD Graphics (on models with Intel Pentium or Celeron processor; supports DirectX 10)

  They don't give him a number. The processor is based on the Sandy Bridge architecture, so any driver for the video card HD 3000 series will work.

  Latest version of the Intel driver

  This can take up to 8 GB (2 x 4 GB) DDR3-1333 SO-DIMM, like this:

  http://www.Amazon.com/Samsung-PC3-10600-1333MHz-so-DIMM-upgrade/DP/B003XN3BZC/ref=sr_1_1?ie=UTF8&QID=1413330996&SR=8-1&keywords=DDR3-1333+so-DIMM

  Here is the Manual:

  Manual

  See page 45 for the upgrade procedure.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• i7 - 2600 k on Windows 7 BSOD issues

  I'm having a problem with Windows 7 and World of Warcraft.  I'm not very well filled with code it (again, I am currently in school for her), but I can build and configure computers.  Anyway, dump files do not speak to me how they could some of you so here.

  https://docs.Google.com/open?ID=0B4L7RMcYZxlBNm55S3dOREh2VVU
  https://docs.Google.com/open?ID=0B4L7RMcYZxlBclM4OG9xSXlFTmc
  https://docs.Google.com/open?ID=0B4L7RMcYZxlBM2wzVUx3bm1rWDQ
  I hope someone here can help.

  Hello

  Don't forget to check with their forums and support of the game Builder as it is possible for
  gambling problems or others to be involved which are known for their. Considers that a
  absolute must do.
   
  ------------------------------------------------------------------------------------------------------------------

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way? Heat associated
  does not always mean too much heat because it is very possible that something is too sensitive
  to normal levels of heat, even

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  =================================================================

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information on using BlueScreenView, MyEventViewer and other
  Troubleshooting BlueScreens - top 3 responses (+ 1 other) methods.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ==================================================================

  Results verified BlueScreenView WinDBG / DumpCHK.
  
  The Bug_Check were all GenuineIntel 124 CAUSE pointing to the processor that
  isn't a certainy. It is possible the CPU, heatsing, the compound between them or even
  drivers or other causes to participate.

  Error checking 124, {0, fffffa8010ad5028, be200000, 5110 a}
  Probably caused by: GenuineIntel
  MODULE_NAME: GenuineIntel
  Nom_image: GenuineIntel
  FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE
  BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE

  BiosVersion = 3302
  BiosReleaseDate = 15/05/2012<-- the="" bios="" is="" very="" up-to-date="" however="" there="" is="" a="">
  He is involved with ASUStek for updates, check the chipset of low level drivers and the
  leading edge and separate device drivers.
  BaseBoardManufacturer = ASUSTeK Computer Inc..
  BaseBoardProduct = SABERTOOTH P67
  BaseBoardVersion = Rev 1. XX

  1. be sure to use the steps indicate above to reinstall all the memory cards and cables. Check
  the vents to be sure, they are clear and that all fans are functioning.

  2. check the Processor heatsink of heat and the compound between them.

  3. check with ASUStek support, their drivers and documentation online and ask in their forums
  about known issues with this model.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  4 use all other methods in the troubleshooters below and those in the next message.

  ----------------------------------------------------------

  BCCode: 124 0 x 00000124

  This is usually heat related, faulty hardware, memory, or processor even if it is
  "possible" he is associated (rare) driver. To be able to remove ALL and reinstall all the cards, memory
  and cables (at both ends) - actually delete and replace - are not just tight. Ensure
  the system has proper ventilation - add a small fan blowing in the contributions. Carefully
  Inspect the card mother and other cards for damage. Pay attention to the fatal material
  error implicitly. You may need a computer store real (not the leeks and glances at a BestBuy
  or other BigBox stores) or system manufacturer support.

  Check the processor heat sink having and the compound between the processor and
  the causes of the heatsink that are common.

  There has been a few cases where Norton/Symantec and other antivirus/security
  programs have caused this error.

  BCCode: 124 0 x 00000124

  Bug WHEA_UNCORRECTABLE_ERROR control has a value of 0 x 00000124. This bug
  verification indicates that an unrecoverable hardware error has occurred. This bug check uses the error
  data provided by the error Architecture WHEA (Windows Hardware).

  0 x 00000124<-- read="" this="">
  * 1289.html http://www.faultwire.com/solutions-fatal_error/the-System-encountered-an-uncorrectable-Hardware-Error-0x00000124-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Issue of Smart View?

  Hello

  Our users report recently that Excel freezes when trying to copy and paste the value of the cell with enable Smart View, the steps they do are the following:

  Open the model smart display of Excel and then click on Control Panel, sharing connection, and then connect to essbase base, ad-hoc analysis.

  then control - C any cell in this model, Excel becomes frozen, they close Excel and restart.

  If Smart view does not activate, then Ctrl C and P control works well.

  Have someone in the Group has a similar question, I hate to blame Smart view for this. We have 11.1.2.5.500 the Smart view, Essbase version is 11.1.2.4

  Thank you

  Is the issue with this model/file?  What happens if the user is using a white sheet excel and did the same steps?

  If its this sheet only, check the display options smart for anything that seems unusual. You can also clear the metadata in the workbook, it could clear up what ever is causing the problem.  to do this, open the template, click Smart View-> Info-> Delete Sheet-> remove all metadata

  given that your username is reconnecting the plug anyway, it does not cause other problems.

• [Noob questions] Model oriented programming OBJECT and event Flex

  Hello, I have two very easy questions for an expert - I think.

  (1) issue-oriented object

  If I have a

  UserElement extends the Image

  UserImage extends UserElement

  UserText extends UserElement

  ...

  UserSomething extends UserElement

  Each UserSomething derived from UserElement has an editElement method that can be placed in the superclass UserElement needs to look exactly because in this journal.

  Now, from the root of the Application, I have to call the editElement, but I'd rather not be forced to have a giant switch inelegant structure... There is a way to dynamically cast to the right class?

  (2) issue of event model

  I read the documentation and googled around, but if I have this structure

  Application

  Canvas1

  Control1

  Canvas2

  CONTROL2

  and I send Control1 event, the full path is Application > Canvas1 > Control1 > Canvas1 > Application. But if I need control2 to know that this event is FAILED, the only way I see is to call a method in the Application control2. Is this correct or there is a way to redirect the event in a way to broadcast?

  Thanks in advance for anyone who wants to answer

  maestro91,

  Answer, no, protected Alexander is very good and I used it in this way - protected is visible to inherited classes OK.

  You should be able to:

  var r: derivedClass;

  a = new derivedClass();

  function do_something (b: baseClass)

  {

  test to find out which class that I was adopted, then derived

  ((derivedClass) b) .editelement ();

  above must call the correct method

  }

  You must explicitly cast to ensure the right call gets shot, but you used baseClass as an argument, so you can send your derived through classes.

  Richard

• Number of model and IE

  Hello
  
  I have a problem of web design and I was wondering if anyone can help. It seems to be a problem with IE browser. As my page in Firefox. Basically, I created the page test_index1.html, and they have seen very well. I then turn into a model (TPL), I can listen to samples (with temp turned on in preferences). The problem is that all pages subsequently created from the template are not correctly displayed in Internet Explorer. The file created from the model does not properly in Internet Explorer rather than Firefox. Are there known issues with IE model, you can shed light on what is happening here? : O).
  
  
  BTW I have not yet inserted any editable regions this time (I did originally) before because I want to just make sure that it is not my code of test_index2.html the cause of the preview.
  
  Regards Jo

  Hello

  This has been resolved now: basically, there was a HTML tag is missing from the top of the page that was the from page of the model InstanceBegin model etc. before the DOCTYPE.

  Everything works now! : O).

• Bug in data modeling: create undo tablespace

  The output of the DDL script for the Undo type tablespace has a spelling error:
  
  CREATE UNDO TABLESPACE UndoTBS1 PETIT_FICHIER
  DATA FILE
  ' C:\oracle\product\10.2.0\oradata\VolksNet\UNDOTBS01. DBF ' SIZE 512 M AUTOEXTEND ON NEXT MAXSIZE 16 K UNLIMITED
  LOCAL MANAGEMENT MEASURE
  GUARANTEE OF TENSIONING
  ;
  
  It spells TENSION instead of RETENTION.

  Thank you, I logged a bug.

  Please note that we have a feedback customer specific applications to track issues for data modeling, although it is still an early release of the adopter. The link is http://apex.oracle.com/pls/otn/f?p=2306:10

  Sue

• Of the known problems with 2010 15 "MBP Sierra (6.2) upgrade?

  Hi people,

  Someone has comments or questions to their update of the model of 6.2 to Sierra?

  See you soon,.

  D.

  You can have graphics issues with this model. It's a common problem but not one caused by Sierra.

  The problem is probably due to the discrete GPU failure. Download gfxCardStatus2.3 and use it to disable the discrete GPU. It is of a temporary workaround until you get your motherboard replaced.

• iPhone 6 s Plus 9.3.2 problem Bluetooth

  Hello Apple personal support,

  I just upgraded my iPhone 6 more than 64 GB of iOS version 9.3.1 the newly released 9.3.2 thanks to the embedded wireless iPhone general Software updated successfully.

  Today, I began my journey to work as usual by car (Audi A4 front new model 2016) where I had previously configured the feature Bluetooth telephone Audio pairing with my iPhone. Unfortunately, I noticed that, today, the conversation of Bluetooth is almost impossible to do, call and receive a call. The sound is completely broken and disrupted on both sides of the call. Please consider that during yesterday and the days preceding, using iOS version 9.3.1 conversations have been pretty good. Also, I tried to cancel the twinning of the bluetooth connection on both sides (car and iPhone), to restart the iOS device to pair the Bluetooth once more, get the same problem.

  I know that you have unlocked version 9.3.2 to resolve Bluetooth issues for new models of iPhone, but it seems that now, once resolved on these devices, the problem has spread to the old 6s over iPhone models.

  Please, any help would be appreciated.

  Thank you much in advance.

  Kind regards.

  Try to do a Reset

  Go to settings > general > reset > reset all settings

  This custom erase all user data

  And pair your device again

• Ghost X 2

  Here's what happened and that I was invited.  Seems to me that the device has a problem with the wifi.  Others having this issue with this model.  If so, no matter what resolution available?

  Launch of HP network control

  A problem is preventing Internet Explorer to display the web page.  Click the button above to launch HP network check automatically diagnose and repair the problem.

  All HP network control

  • Can automatically detect, diagnose and fix many common network problems
  • Integrated with Windows Network Diagnostics Framework, so it works both at the same time
  • Provides clear instructions to solve problems that cannot be resolved automatically
  • Displays system and network troubleshooting easier key information
  • INDICATED AFTER VERIFYING THAT the COMPUTER has BEEN HAVING A PROBLEM with the CONNECTION, router was 80% and works well.
  • This connection problem that happened at least twice a day for the last 10 days,
  • Internet Explorer has stopped working.

  Hi there beinhawaii,

  I don't know if others have had the same problems, but here are a few docs troubleshooting HP to try, they seem to match the problems you are having. Although the title indicates Win 8, if your slate comes with 8.1, you should have no problem doing the same steps of the solution. Hope this helps

  Solving the problems in Internet Explorer

  Troubleshooting Internet and wireless network

  Improvement of the performance of the system without adding memory

• Distorted screen of the console using Ubuntu Linux on Satellite C70-B-212

  Hi all

  I have a problem with Linux on my laptop Satellite C70-B-212. The videochip Intel Graphics 4400 is supported by Linux, but on this laptop, it gives very distorted output on the console screen. I see a few vertical lines on the screen showing a few ghosts strange images of the output.

  The Office of exit itself seems to stop smoking well, until I have a screen and move it to the bottom of the screen. You can see the top of the screen some distortion in the upper line.

  In Windows everything works fine. When I use the parameter 'nomodeset' turns off the kernel mode setting these lines do not appear. But then, I expect that 3D hardware acceleration is disabled too.

  I suspect that this is a timing issue with the screen of the computer. Just a very minor lag on the clocks or sync.
  It could be just my laptop and then it just cloud be replaced or maybe it has to do with the series.
  Anyone seeing the same issue on this model or series.

  Having Linux on C70-B-212.
  Who can verify this by starting Linux liveCD on laptop C70-B-212.

  Thank you

  Marco

  Hi Marco

  It sounds like a driver problem => kernel.

  You can try a kernel later maybe?
  Do you know that you are using atm?

  in terminal type:

  uname - r

  Course Fedora uses 3.16 nuclei which is a very recent (if not the most recent) output.

  Some Ubuntu distro oriented have test of nuclei in the repositories, you will have to add it manually.
  Maybe it's worth a try?

  Tom BR