Scroll the issue in the model of "Influence".

Similar Questions

• Horizontal scroll bar in the model of interactive report region 5 Apex (universal theme)

  Hello

  We have migrated our application from 4.2 (theme: 21 scarlet) to 5.0 (changed to universal theme). Most of our reports are interactive reports and have more than 20 columns to display in the reports. 4.2 in the 'Region of report"model horizontal scroll bar came from bottom of page like below and has been easy for the user to scroll through the options to the right and see all the columns.

  

  In the universal theme apex 5 with 'interactive report' model in order to see the columns on the far right in the first lines user must scroll the vertical bar first, then scroll horizontal straight bar and vertical bar to go to the top

  
  

  

  
  

  How can you have the scroll as in 4.2 bar region of report model. I think that we need to make some changes in CSS and also need to copy the existing model and make changes and use this model in all reports.

  
  

  Thank you.

  RAM
  

  
  

  Hi Tim,.

  Thanks for the reply. I tried this option before posting forum. It did not work. Now, after changing position attribute fixed to the ' Page "(or region) in the report attributes section it works." " When we migrated the app at UT, he has been on 'None '. Problem solved now. Thank you.

  

• Pages export to Word using the model of NEWSLETTER, issue 1 of page spacing

  QUESTION: Anyone know if model NEWSLETTER (and or Museum Brochure) correctly export to .docx and how delete images or change the text boxes using these models so that I am still able to export properly?

  I used the NEWSLETTER model, whose Pages can export to .docx and then import to .docx (I don't know if that Word can do, but Pages indicates it would be).

  Problem: after the header of the newsletter, I removed the photo and have floating only the areas of text underneath.  I have two pages, the 2nd page export perfect (a page break separates it from the first).  On the first page, there are 12 small boxes in two columns under the heading who generously and easily fit on the first page.  It is not unlike the model I have, however, but with no photos.  I've seen many templates use these 'boxes' in support of the columns of text on a page, I don't think the floating box would be a problem.  However, I like the wish of floating boxes to learn how to use them so that they "work".

  I saw immediately that the text boxes, I added, when export and imported .docx, lose their place and float under the heading (NEWSLETTER) (superimposed text, bad page layout).

  I noticed the paragraph (carriage return, Enter) symbols, while I moved around text boxes, had become interlaced between the boxes, but not all - 1/2 at the bottom of page.  I then noticed that attempt to remove the superfluous paragraph runs in .pages (after repositioning all the boxes), but aggravated .docx, also the Pages do not leave even to remove the first symbol (it mystifies me, because the models do not appear to use paragraph at all except inside the floating boxes).

  Finally, I added enough symbols paragraph so that there was a conflict between each text box, but not as much as Word decide to add a blank page.  I had to make sure the columns are too wide - they should be 1/4 "part we will tell.  THAT APPEARED TO WORK.  Pages exported and imported it point by point I was happy.

  But when my Advisor job achieved and open in Word (the one for Windows 7), the SAME problem, I had before setting the transport returns appeared: the two decoders or four are overlapping the title, and set the person must have inserted transport returns before the first text box to move it all down (which seemed to work - but failed as an export and no not to use practice later).  'good work '.  Fortunately, I also have attatched a PDF export, however the person had asked to change their PLU using high government dell.

  QUESTION: Anyone know if model NEWSLETTER (and or Museum Brochure) correctly export to .docx and how delete images or change the text boxes using these models so that I am still able to export properly?

  Thank you hope that your next print job loose its staples.

  Well, we have said for years in this community if you want stressless, architecture native document exchange with Windows Word users that you need to use the most recent Word available on the Mac.

  Pages is not a clone of Word, and Apple does not guarantee that the open translation process / export from/to the architecture of document Word will remain faithful to the original of the document formatted.

  In response to your questions:

  1. If you have document objects in a model with x on their border, and then the object is locked. You visit the tab Pages to reorganize v5, and downstairs you can unlock these objects for further editing, or deletion.
  2. It is advice that we can give here will make sure Pages exports specifically to the word he already did not. The logic of translation is connected to demand, and it is the price of roulette.
  3. Continue the first paragraph.

• The model layers performance issues

  Hello

  First my characteristics:

  Illustrator CC version was last updated (2015.something I think)

  running on Mac OS X El Capitan

  iMac mid 2011 3, 4 GHz i7/32 GB of Ram (although I doubt that this has nothing to do with the material)

  I'm working on an infographic to release magazine feel that I can't show you at this point, but it looks like this:

  a map of a country with some areas filled with a fairly simple pattern that I created with Illustrator Pattern-tool (object/model)

  which is not really more than a line stretch (just like this http://www.clipartkid.com/pinstripe-diagonal-pattern-clip-art-selhyu-clipart/ ).

  
  So, I guess this could be one of the most basic reasons, there might be and the entire file is about 5.8 MB big, which is not a big deal I guess.

  BUT somehow the print file resulting makes problems.

  1 make it inside Illustrator runs slower. No dealbreaking slow, but significant.

  2. I can create a PDF file, but if I open with the software overview of the Mac OS, most of the time works or not is the loading for ever (so throw the illustration in a mail the Mail app makes it unusable because of that). If I open it with Acrobat, it seems to work quite OK.

  3. export EPS (which prefer my designer) finds herself in a loading screen which takes forever and Illustrator devours Ram of the computer (I can watch the Ram usage of the growing Illustrator for anything up to 32 GB then crash).

  4. get the designer, who works on a PC, but it wouldn't reall ymatter, to work with the PDF file works until she tries to create a printable package. This process would break all his complete system.

  And all this only happens with these patterns of lines which I don't quite understand. If I get out them of the design, everything works perfectly fine.

  I'm at the end of a production of magazines, then, probably, I won't get it the answer just in time, assuming that there will not be a solution posted in the next 2 hours, here now, just do all the lines manually, which is certainly a ridiclous as this model creator is made just for that. But at this point I can't really experiment. So this question is more for me to understand what happened as I don would like to completely renounce such a basic feature.

  Thanks guys,.

  Val

  What is the form that you filled with this model?

  Is there transparent areas that just overlap the model?

  What happens when you select objects with the filling of model and then object > Expand before exporting?

  In case this is a great shape he could also contribute to do a larger repetition and contains already more stripes.

• When I try to choose an AutoComplete drop-down with an arrow key, Firefox scrolls the page

  When I'm in a page Web, YouTube, for example, and I type, AutoComplete options appear under the text field. When I try to select one of the following options with the arrow down on my keyboard, it scrolls the entire page and do not select one of the options of AutoComplete in the field.

  I have already activated and deactivated the scrolling and automatic scrolling to see if it solves the problem, but this is not smooth. I use Firefox Beta. I can't go back to the last version of Firefox because that would not allow my mouse to scroll.

  Thanks for any help you may have!

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Can you determine the model of the iPad with DK S/N * VD2?

  Can you determine the model of the iPad with DK S/N * VD2? I've upgraded to a newer iPad and need to sell the former. He reconnects with the default status, and I would go instead through the installer to get this info.

  < personal information under the direction of the host >

  Go to settings - general - about - Scroll down - must be model number

  (1241)

• Need to identify the model A100 to select the good BIOS update

  Good morning to all and thanks in advance for any whole made :-> assitance

  My question is this:
  How to identify the exact model of a Satellite A100 PSAAxx series laptop?

  Reason:
  I need to update the BIOS and I'm uninclined to simply apply the updates, I could get for fear of turning it into a brick.

  What I know:
  There is some time, my wife and I bought a used Satellite A100 - in good working condition, but warned that he has 'problems' with USB ports driver. The time has come to address the issue of the USB, and the upgrade of the BIOS seems to be a good starting point.

  At the time of purchase, the label with the model number and the number of harem on the bottom of the system was quite readable - unfortunately, this label has subsequently lost all 'tailor-made' (we know what the fields are called by all useful information has disappeared).

  It is a Toshiba Satellite A100 (I have discs recovery and thus marked user manual).
  The user manual specifies the model number PSAAxx.
  CPU: Celeron M 1.4 GHz
  RAM: 704 MB
  HD: 40 GBbyte
  Graphics card: ATI RADEON XPRESS 200 M Series
  BIOS: v1.20 2008-12-12

  Any suggestions gratefully received

  Peter Townson :->

  Hello!

  To identify what A100 you exactly, you can use Toshiba PC Diagnostic. If you have installed the laptop with the recovery disk, this tool is installed too.

  If you n t have PC diagnosis, you can also download:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In the diagnostic tool you can see on the part number (basic information of category).

  Good bye

• Certificate autoenrollment fails after the update of the model

  Asked me to extend the period of validity on the certificates that we issue to users to authenticate on our wireless LAN. Group Policy allows us to cause users to automatically enroll for a certificate by using a version 3 template (our issuing CA is Windows Server 2003 Enterprise Edition). Users were able to automatically enroll for certificates with no problems.

  To increase the duration of validity, I modified the model certificate as a business administrator (I also increased the renewal period), then forced all certificate holders to re-register, which changed the model on the CA to 101,0 version (previously it was 100.2).

  None of my users seem to be reenrolled for the updated certificate. The search Event Viewer on my PC, I see four 'CertificateServicesClient-CertEnroll' information events (event ID 65, 64 & 66) suggesting that I connect successfully to the issuing certification authority, followed by a source "CertificateServicesClient CertEnroll" error (event ID 13) and error (ID of the event 6) source "CertificateServicesClient-autoenrollment" (details below). This sequence is generated whenever the autoenrollment is triggered.

  Can anyone suggest what could be the problem here? Thank you very much, Damion.

  Log name: Application
  Source: Microsoft-Windows-CertificateServicesClient-CertEnroll
  Date: 18/07/2011 08:44:24
  Event ID: 13
  Task category: no
  Level: error
  Keywords: Classic
  User: domain\user
  Computer: COMPUTER.exe.nhs.uk
  Description:
  Registration certificate for user domain\username could not enroll a certificate WirelessUser with the ISSUINGCA.domain\Issuing CA 19934 request for domain ID (the request template version is newer than the version of the model of support. 0 x 80094807 (-2146875385)).

  Log name: Application
  Source: Microsoft-Windows-CertificateServicesClient-registration auto
  Date: 18/07/2011 08:44:25
  Event ID: 6
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: COMPUTER.exe.nhs.uk
  Description:
  Automatic registration of certificate for domain\user failed (0 x 80094807) the request template version is newer version of model taken in charge.

  This problem has been resolved by a restart of the server.

• Notify the ListView data in the model have changed

  Hello!

  I know this question has been asked several times, but I have yet to find anything satisfactory.

  I have a ListView, filled with a QListDataModel.

  After some time I update an element of the model. So far, the only way I found to the ListView so that this change is to delete the model and then reappend all elements. But the problem with this approach is that ListView Flash and scroll to the top of the page. Is there anything better to just say ListView that it should update the visible elements?

  Thank you

  Well, I just signal myself in the WRITE method and it works.

• CUC - uses the model of eggs of 1000 users for users of 1100?

  Hello world

  According to http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/suppor...

  If I select the model of the EGGS for 'Platform Overlay for up to 1,000 virtual users'
  -Means that the user account and the mailbox in the UCA should not exceed 1000 UESRS?

  If I have 1100 UESRS and very very low use of voicemail, I can still using this model of EGGS "CUC 1000 user?

  Thanks in advance

  Sam

  Hello

  According to my understanding, surpassing the number of users speciied in EGGS will not raise any errors. However, given that the product has been tested with some settings for optimum performance, exceeding the specified limit is not recommended and very probably is not supported by the TAC in the case of any performance issues.

  Manish

  -Does the rate of useful messages-

• Scrolling the mouse resets too fast at every reboot

  I have a Microsoft Explorer Mini Mouse (although I think that the mouse model is not relevant).  The scroll wheel is moving too fast. The smallest button jumps a whole page or more.  My normal solution is to go to control panel-> mouse-> wheel control and adjust vertical speed control to something very slow, like 8 (of 40).  This works until I restart the laptop (Win 7 Enterprise).  Since it is a laptop, it means that I am at least once a day.

  I tried to change some registry settings, but nothing seems to work.  Is there an official solution from Microsoft for this?

  Hello

  Have you made changes on the computer before this problem?

  I suggest to check the following methods and check if it helps.

  Solve problems with the mouse button or scroll the parameters: http://support.Microsoft.com/kb/303091

  Troubleshoot a wireless mouse that does not correctly: http://support.Microsoft.com/kb/321122

• OsCustomizationSpec and OSCustomizationNicMapping they are a good way to set up the new virtual machine for the model

  I build a script to generate auto magicly VM when I have import information from a csv file. I have the latest PowerCli, I am trying to build servers r2 Sever 2012 model.  I tried several OsCustomizationSpec (OCS) of in the hope of getting something to work, but I had no luck so far.  In VCenter, it shows that it applies the OCS, but is not apear to have an impact on the server.  I have disabled UAC since the last time that I tried it so maybe that will make a difference.  I am under ESXi 5.1 update 2, just to try to give all the necessary information.  Ideally, I'd like Sysprep, the value of intellectual property, change the computer name and join the server to the domain.  That's all! lol I have the book "VMware vSphere PowerCLI Reffernece, automating vSphere Administration, I walked through step by step.  The new version of PowerCli seems not have the x 86 limitation as earlier versions of PowerCli.  I tried so many different things, I'm not sure what to put in place as a starting point.

  # Save the object credentials with permission to join the domain.
  $DomainCredentials = get-Credential "domain\testername."
  # Clone our Spec by adding the domain information.
  $Spec = get-OSCustomizationSpec "Windows Server 2012 R2"
  $Spec += get-OSCustomizationNicMapping - Spec $Spec
  #$Spec | Select *.

  # Get our VM
  # Change network settings
  Get - VM BigServername | Get-NetworkAdapter | Together-NetworkAdapter - NetworkName nic - 172.16.25 - VLAN225 - connected: $true '
  -Confirm: $false | out-null
  # Close the comments to make change.
  Stop-VMGuest - VM $VM - confirm: $false | out-null
  # Wait while feedback stops
  While ($vm. ExtensionData.Runtime.PowerState - not "poweredOff")
  {
  Start-Sleep - seconds 1
  $vm. ExtensionData.UpdateViewData ('Runtime.PowerState')
  }
  # Apply Spec customization to apply the new network settings
  Get - VM "BigServername" |
  Set-VM - OSCustomizationSpec "R2 Windows Server 2012" - confirm: $false |
  Start-VM

  I can rebuild the model, or something else, we must do this work.

  OR - is simply not the best way to configure the VM?  If not, what Sysprep?

  Good news, but first, I would really like to know where the log files are on which server to the OsCustomization process.

  I decided to reverse engineer and create a CSOS within vCeneter and once I got to work, I kept creating new CSO via PowerCli until I could get that to work, create a new virtual machine.  Once I got this to work, I have tryied to apply on a cloned vm, with no parameters. I got it works too.  I tried to go back to my original image, but I couldn't get this to work.  Something's wrong with this picture.  He wrath that the problem was related to the permissions on the local client.

  New OSCustomizationSpec - OrgName company OSType - Windows - ChangeSid-Server "vcenter.dom.com" - name PowerCliOnly4 - persistent administrator-Type FullName - AdminPassword! password123 - zone "Eastern (USA and Canada)" AutoLogonCount - 3 - domain dom dadmin - DomainUsername - DomainPassword! password123 NamingScheme - vm-Description "PowerCli Use only" - confirm: $false

  Get-OSCustomizationNicMapping - OSCustomizationSpec PowerCliOnly4 | Game-OSCustomizationNicMapping - Position 1 - IpMode UseStaticIP - IpAddress 10.10.10.98 - 255.255.255.0 - DefaultGateway 10.10.10.1 Dns subnet - mask "10.10.10.10","10.10.10.11" "-confirm: $false

  This seems to be very picky.  Because the area is one of the parameters, you cannot put it in the DomainUsername, no dom\dadmin. The part that I really want to know how to get more, is what happens if your vm has a different local administrator as the administrator account.  It turns out that FullName - is not the account that it to connect locally with tires. When I created the vCenter Medtronic Chondroitin, I put 'me' in the name and information of the Organization and that's what was settled in the FullName property:

  Name: PowerCliOnlyM
  Type: persistent
  ServerId: /VIServer = dom\[email protected]: 443.
  Server: vcenter.dom.com
  LastUpdate: 24/09/2014 13:33:19
  DomainAdminUsername: dadmin NO dom/dadmin here!
  DomainUsername: dadmin
  Description: PowerCli use only, done manually in vCenter.
  AutoLogonCount: 3
  ChangeSid: true
  DeleteAccounts: false
  DnsServer:
  DnsSuffix:
  Domain: vsi
  Full name: me
  GuiRunOnce:
  NamingPrefix:
  NamingScheme: Vm
  OrgName: CompanyTU
  OSType: Windows
  ProductKey:
  Time zone: (USA and Canada)
  Working Group:
  LicenseMode: NotSpecified
  LicenseMaxConnections:
  EncryptionKey: {-126, 3, 48, 108...}
  ExtensionData: VMware.Vim.CustomizationSpecItem
  ID: PowerCliOnlyM
  UID: /VIServer = vsi\[email protected]: 443/OSCustomizationSpec = PowerCliOnlyM /.
  Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient
  AdminPassword: w
  DomainAdminPassword: N
  DomainPassword: N

  DNS: {10.10.10.10, 10.10.10.11}
  Wins                  :
  SpecId: PowerCliOnlyM
  Spec: PowerCliOnlyM
  SpecType: persistent
  NetworkAdapterMac:
  Position: 1
  IPMode: UseStaticIP
  IP address: 10.10.10.98
  Subnet mask: 255.255.255.0
  DefaultGateway: 10.10.10.1
  AlternateGateway:
  VCApplicationArgument:
  ID: /VIServer = dom\[email protected]: 443/OSCustomizationNicMapping = OSCustomizationNicMappingImpl-PowerCliOnlyM-persistent-1.
  UID: /VIServer = dom\[email protected]: 443/OSCustomizationNicMapping = OSCustomizationNicMappingImpl-PowerCliOnlyM-persistent-1.
  ExtensionData: VMware.Vim.CustomizationAdapterMapping
  Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient
  Version: 1

  I think that it is good to know that the virtual machine reboot 4 or 5 times as it goes through this process.  It breaks is you try and do something for the virtual machine that interrupt the process.  I don't know that I'll think more questions in a second.

  In addition, it cost he had some problems with the put between quotation marks, single or double around the password, but I did not check this again, I just know that once I took them, he began to work.  I ran on other issues while testing as I was using a single IP address, so if I do not disable the test VM, the following would not work because of the conflct network, maybe I shouldn't admit that... lol

• hand tool to scroll the timeline

  Hello

  I've just updated the Adobe After effects to CC15 and just noticed that the hand tool you cannot scroll the timeline horizontally.

  It's a small thing, but it slows down the workflow.

  Everyone knows about this problem as well? How to solve it?

  Thank you

  Joao Monteiro

  www.joaomonteiro.TV

  See the second to last question on this page:

  known issues in after effects CC 2015 (13.5)

• PowerCLI script - new virtual machine of the model

  Hi all

  I am very new to power CLI scripting, and these days, that I read a lot of help to automate the creation of a new virtual machine based on the model of the virtual machine.  Script that is not that hard, even location new virtual machine on a particular data and in a particular resource pool store is not difficult.  For this I came up with this very basic script/command:

  "New-VM - ResourcePool < resource_pool > - < folder_name > location - Datastore < datastore_name > - name < VM_name > - < template_name >"model

  However, I came across some problems that I can't find information in help or in the forums.  Problem with the above command is VM will be created in the pool of appropriate resources and file as long as they are unique, but if there are multiple instances of resource pool or a folder with the same name as the script spits out a mannequin.

  So for example if I want to create a new virtual machine to the location following Data_Centre = > RootFolder1 = > SubFolder1 = > SubFolder2 and SubFolder2 name is unique that no problem, the virtual machine is created at this location.  However, if the SubFolder2 exists in Data_Centre = > RootFolder2 = > SubFolder1 as well as the virtual machine is created in the folder root of the location of the model.  For example, if the model is in "DC = > Folder1 = > Subfolder1 = > Subfolder2 ' the virtual machine will be created in the folder Folder1

  Any suggestions on how to ensure that the virtual machine is created in the desired folder/location as well as a list of resources?  In my view, there are really smart guys here and I suspect that this issue would not be a problem at all.  Any help would be appreciated.

  See you soon

  It is not a matter of following the right path.

  You can use the location setting to get the exact folder you want. For example

  $dc = get-data center-name DC1

  $folder = get-file-name Folder1-location $dc

  $subfolder = get-file-name Folder2-location $Folder1

  or

  $dc = get-data center-name DC1

  $subfolder = get-file-name Folder2-location $dc

  You will need to find a "place" in the path to your destination folder where it will be unique.

• First group title below displays under the column headers using the model 23 classic report with the help of repeat titles on break

  Hello

  I am migrating an application from 3 APEX APEX 4.2 on a thing I noticed with the classic reports when I put them in the model 23, it's that the first section break has break notch under the headings of columns for this section of line while the remaining lines properly have it display above the headers on the subsequent sections of group.

  
  When I look at firebug code I saw that all the tables but the first, the break line is included in the last line of the previous table, so I can see how it did not work for the holidays since.

  I have tow questions.

  1. is it really intentional because it seems not terribly elegant and my users to zero immediately above as a perceived bug.

  2. is there a reasonable job around always use headers repeat on break? I have multiple reports on the same page in places so switch to interactive reports is not a quick fix for me in this case.

  Example of a question can be seen at apex.oracle.com at home

  Thank you

  Brad

  Roadling wrote:

  Hello

  I am migrating an application from 3 APEX APEX 4.2 on a thing I noticed with the classic reports when I put them in the model 23, it's that the first section break has break notch under the headings of columns for this section of line while the remaining lines properly have it display above the headers on the subsequent sections of group.

  1. is it really intentional because it seems not terribly elegant and my users to zero immediately above as a perceived bug.

  The Standard report template definition in issue 23 contains thead and tbody elements:

  Before the column header

  Column title template

  #COLUMN_HEADER#
  

  After the title column

  After the lines

  
  
  
  
  
  
  #PAGINATION#
  
  
  #EXTERNAL_LINK##CSV_LINK#
  

  This is intentional, the best practice for marking up HTML tables. What is not expected is the problem that arises when this model is used with the break of repeat titles on break formatting option. The repeated headings result table consisting of soup of tags containing several poorly constructed tbody and thead, which is not valid elements.

  2. is there a reasonable job around always use headers repeat on break? I have multiple reports on the same page in places so switch to interactive reports is not a quick fix for me in this case.

  Create a copy of the report model Standard in Standard (break formatting) for use with reports of the break, remove the thead and tbody definitions of template tags and the breakdown of the reports to use the new model of change. (Or, if you use mainly break reports using the Standard template, keep the tags in the copy and remove them from the original in order to minimize the number of reports, you need to change.)

  Personally, I would create a report model of line custom to break complex reports in order to be able to have complete control over the structure and presentation.