Issue of last minute...

Similar Questions

• How can I change the duration of an MP3 file I downloaded? For example, I have a song that 1.5 last minute, but I want to only keep the 21 seconds. How can I culture there?

  How can I change the duration of an MP3 file I downloaded? For example, I have a song that 1.5 last minute, but I want to only keep the 21 seconds. How can I culture there?

  Your best bet would be looking for writers to mp3/wave. There are a few very good freeware/shareware sound there. I suggest this so that you can choose what format you want to save your file cropped as.

• Last day of the month with the last minute of the day

  Hello
  I wonder about how to get the last day of the month with the last minute of this day(23:59). We can use the last_day function (DATE) to get the last date, but reminds me of the time of day when the function has been executed. But I want to have the last minute with my last date of the current month.
  
  Please inform.
  
  Thank you
  
  HP

  Hello

  Ora_bie wrote:
  Hello
  I wonder about how to get the last day of the month with the last minute of this day(23:59). We can use the last_day function (DATE) to get the last date, but reminds me of the time of day when the function has been executed. But I want to have the last minute with my last date of the current month.

  In fact, it returns at the same time as the argument you pass; But whatever it is, is not what you want.

  This will return the last day of the month that contains the DATE 23:59 (or 23:59) dt:

  SELECT  ADD_MONTHS ( TRUNC (dt, 'MONTH')
               , 1
               ) - (1 / (24 * 60))
  FROM    dual
  ;
  

  TRUNC (dt, 'MONTH') is 00:00 on the first day of the month that contains dt.
  ADD_MONTHS (TRUNC (dt, 'MONTH'), 1) is from 00:00 the first day of the month following the one containing dt.
  ADD_MONTHS (TRUNC (dt, 'MONTH'), 1)-(1 / (24 * 60)) is a minute earlier.
  (Since there are 24 hours, each with 60 minutes, every day, 1 / (24 * 60) days is identical to a minute.)

  Another (less clear, in my opinion) way to get the same results is:

  TRUNC (LAST_DAY (dt)) + (1439/1440)  -- 1440 minutes = 1 day
  

• How to find lines that are inserted in the last minutes n?

  Hi all
  I have a log table where, whenever a warning is issued, a new row is added. The table contains a field with the sysdate when the warning was issued.
  I would need to collect all the warnings in the last 30 minutes (supposed) and send a mail to the administrator. Looking at some FAQ I have explained this:
  
  Select * from PROCEDURE_LOGS p where ((p.DATE_LOG-sysdate) *-1440) < 30
  
  However, it does not do anything.
  Can someone help me correct this statement?
  Thank you very much
  Frank

  Assuming that the field is a DATE field and time information are included in this field to date. Then your application should work.

  I would write it differently, but the logic is the same.

  select *
  from procedure_logs p
  where (sysdate - p.date_log) * 24 * 60 <= 30
  ;
  

  Perhaps the information is not yet committed, so that you don't see it in your additional session?

  Look at your data and consider wheather this record must be included or not.

• How can I stop Windows Live Messenger issuing alerts every minutes, hours and days of the year? I don't use it.

  I do not use Windows Live Messenger, but he insists on the display of alerts telling me to connect. Why it does this and how can I stop without causing problems in other areas? I know nothing about it except that the people who try to contact me (I guess) can do it without going through channels such as email or telephone.

  I do not use Windows Live Messenger, but he insists on the display of alerts telling me to connect. Why it does this and how can I stop without causing problems in other areas? I know nothing about it except that the people who try to contact me (I guess) can do it without going through channels such as email or telephone.

  I assume you have Windows Live Messenger, because you have installed the Windows Live Essentials.
  If so, a brief explanation...
  Windows Live Essentials includes some programs that can be installed or NOT, must be installed. You can choose whoever you want.

  Now, you have 2 options...

  1. you can disable. He will remain in the system but inactive.

  2. you can purely and simply uninstall it, and it will be out of the system.

  RE: Disable Messenger
  Open MSN Messenger > at the top, click on tools > click Options > column to the left, click on Sign In > straight column, uncheck all boxes > click OK done wnhen.

  RE: Uninstall Messenger

  Start button > in the search box, type programs and features > press the Enter key. Scroll down to Windows Live Essentials > right click it > click on uninstall...
  Follow the guests but be careful to screen > it will ask you what program to uninstall. Select Windows Live Messenger. Follow the prompts.

  You can check out this tutorial:
  http://www.dkszone.NET/uninstall-remove-Windows-Live-Messenger-How-to

• grrrrr failed the icnd 1 last minute push irrelevant results either.

  I took the icnd1 to try to get it before the changes.  I got a 700 deaths was 802 I think.  Now what.  What is to be added and removed from the review of new.  They do not print a report score for me either. :(

  @diaczykmd1,

  Unlucky brother - it is a difficult test to pass when you are new to the world of networks. This will be the second time, they changed the syllabus for ICND1 and honestly, I wouldn't worry. The basic principles will be exactly the same. The most important thing with Cisco exams is to read each question carefully. Half of the questions you get wrong can often be because you misunderstood the question rather than to not know the answer. They like their word slyly.

  Study the new syllabus and resume.

  See you soon,.

  Luke

• Nothing like to wait until the last minute...

  Passed VCP-510 today with a 444. Now certified in 3,4,5. Could not have done with this great community.

  Congratulations!

• Big problem last Minute

  Hi all. I have a file .swf which was published for Flash Player 6 and has a rate of 30 frames per second. On my Mac, it plays fine on the PC, it plays very well, but when I view it in a browser on my PC and online, it plays quite a bit slower. Why is this, and can it be fixed?
  
  Help would be very appreciated. Thank you.

  I tested it in Safari on my Mac offline and it's a little slower. Ive also has
  tested in IE and Firefox on my PC offline and they also run more slowly. Is it
  just one of those things I have to accept or can it be fixed? Sound quite
  discouraging. Thanks for your help so far.

• I'm trying to update my ipod on itunes when it says I have minute left I get a message that he told me that my connection has expired

  trying to update my i pod on itunes when it arrives at the last minute, it says connection has expired, anyone can help

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• Start & restart time is 5-6 minutes - Blank screen when starting the process.

  1. Every time I have start or restart my computer and I timed several times he and average is 5.5 minutes. It's the sequence of events;
  2. Start or restart
  3. Computer stops
  4. HP will appear instantly
  5. Scaning of Windows bar
  6. Appearance of Windows Logo
  7. A black screen with cursor and last minute 1.75
  8. Desk top of page icons appear so quickly, followed by the taskbar
  9. Then the sidebar (which I stopped during startup and the time was not performed)
  10. The last item to start is Kaskresky Internet Security 2010 and restart its not updated
  11. I don't think I have too many start up programs
  12. A Geek Squad agent told "he disobeys in safe mode, which suggests that it is a problem with the software loaded on the computer.
  13. Any ideas on this one?

  Thank you for your time & consideration... Celestyna

  Hi Celestyna,

  It is possible that some element of start-up or third-party program installed on the computer is at the origin of time start delay.
  I suggest you perform the clean boot procedure and check.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Perform the check and the clean boot if you have the problem.

  1. click on start, type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the Load Startup items check box.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click restart.

  Optimize Windows Vista for better performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Restart the problem after closing the lid of the laptop for a few minutes

  I use Windows 7 Home Premium on my Asus A53S. I have reboot issues a few minutes after closing the computer laptop lid eventhough I put what to do after closing the lid to "do nothing" for both on battery and the plug. And it will keep restarting over and over again. Rest

  Hi DennisHii,

  You did changes to the computer before the show?

  Method 1
  I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Method 2
  I suggest you try the steps from the following link:

  Windows 7 is not going to sleep
  http://support.Microsoft.com/kb/976877

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• After effects CC issued...

  Because I downloaded AECC, I can't open previously created projects.  The following occurs:

  When I try to open a project all loads and, at the last minute, I get a message that says:

  
  

  After effects WARNING: could not create the file "/ Users / (my name)/Library/Preferences/Adobe/AfterEffects/13.2/dummy folder"

  I hit 'OKAY' and all files disappear.  AE remains operational, but the content of project disappears.

  What is going on?  How can I get my project to open in CC?  BTW - when I open AE CS5 (where the project was created at the origin), the same thing happens.

  I'm a little panic.

  Thanks in advance.

  See this:

  fix the permissions problem that prevents to start Adobe applications

• Last approximately 10% of audio clips do not play

  My imported songs will not play the last 10% of the clip.  At first I thought it was a result of trying to use clips from 6 to 10 minutes of music, like 1-3 minutes titles seem to never fail, but could not find this same cut out all but the last minute of a long clip (do a 10 minute clip in a two minute clip) and try to use has resulted in his last 10% plays do not!

  The waveform for each audio clip is displayed in the Source tab and is fine.  But rub or play the clip works only until the point 90% and then sound becomes silent.  This is true to the Source drive or when the audio is inserted into the timeline.

  I have converted the original .m4a to mp3 and wma audio files, but always with the same result.  All the clips of converts play in QuickTime and WM player players, so it's something within Pro CS4 Prime Minister himself who is a failure.

  I tried everything I can think without results and have run out of ideas.

  Any suggestions, anyone?

  I would like to convert these source files to PCM/WAV 48 kHz 16-bit format and import it into the project. PrPro should love these files and you should have no problems. You must specify PrPro moments to conform to these files until you make slide them on the Timeline (progress bar for consistent standard in the bottom right of the GUI). It should take only moments with these files (duration and your system will dictate just how long), and you might not even see the progress bar.

  Good luck

  Hunt

  BTW - how you convert? Soundbooth or Audition can do easily, as well as free Audacity.

• I cannot download a .pdf file using Adobe Acrobat module 11.0.6.70. Disabling the add-on allows me to download the .pdf.

  I tried to download a .pdf file and open it with Adobe 11.0.6.70 module in FF 25.0.1 and received a message that the file has been damaged and cannot be repaired. I called the Technical Support of the site, and they asked that I have try with another browser download (ugh!) and the download worked. I returned and disabled the add-on Adobe in FF and the download worked in FF also. Don't know who developed the add-on, but one who did, left a bug in the process.

  HI central_texan,

  Please upgrade to the latest version of Firefox by going on the subject of Firefox from the Firefox menu. If download hangs at the last minute (just before reaching 100%), the cause may be an antivirus software that tries to parse the file and during this process the instance of Firefox crashes. It can also occur when the download is corrupted. What I want to know is in the system requirements, which means "Firefox Extended Support Release".

  To resolve the issue, try disabling the analysis as follows:

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise!, to continue on the subject: config page. A list of parameters must appear
  3. Filter the list by typing in the search bar at top. Enter scanWhenDone. Now you should find the browser.download.manager.scanWhenDone preference.
  4. Double-click this preference to set the value to false.
  5. Then, try to download something and see if it still crashes.

  Please reply and let us know if this helped you!

• CouponPrinter.exe does not work. I can download and run the program, but does not, print already added the file name to the list of java exceptions

  running windows xp, update java 7 51, norton antivirus says file is ok, please help

  HI DJDOLLARROB,

  Thanks for posting, as you might expect, there are troubleshooting you can undertake to check why the download does not work. It is highly possible that the source that you have downloaded from cannot be no longer works. Is there a site that you can check to see if it does not work for them either? Also where it is downloaded from?

  Otherwise please see if scanitemswhendone is enabled: change what Firefox does when you click on or download a file

  If download hangs at the last minute (just before reaching 100%), the cause may be an antivirus software that tries to parse the file and during this process the instance of Firefox crashes.

  To resolve the issue, try disabling the analysis as follows:

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise!, to continue on the subject: config page. A list of parameters must appear
  3. Filter the list by typing in the search bar at top. Enter scanWhenDone. Now you should find the "browser.download.scanWhenDone" preference.
  4. Double-click this preference to set the value to false.
  5. Then, try to download something and see if it still crashes.

  Please reply and let us know if this helped you!