Issue of multiple SSID AP1131
Hello
New Cisco wireless, try to understand this.
I have an ASA who must manage traffic VLAN.
Vlan1 = default VLAN internal.
= Reviews VLAN10 VLAN.
On my AP1131 I want to have "Editorial" associated SSID VLAN1,
and "Guest" SSID associated VLAN10.
6 & 7 on the ASA interfaces are PoE so I think I'm good on that. I have these two ports on the SAA set to Vlan1 and trunks natively.
My biggest pain is that moment that I can't get 'Guest' and 'Editor' broadcasting at the same time!
I don't really have a need for 'A' radio, so I'll just try to get the two SSID broadcast on the radio of 'G '.
I'm setup via the user interface, but frequently glancing at the CLI.
Is this a common problem? Something that someone can point to a common mistake?
Joined running-config; Although I am still much play with him.
Hi Scott,.
Check out these excellent two related threads
https://supportforums.Cisco.com/message/1308205#1308205
https://supportforums.Cisco.com/message/1286462#1286462
See you soon!
Rob
Thank you to support CSC helps Haiti
https://supportforums.Cisco.com/docs/doc-8895
https://supportforums.Cisco.com/docs/doc-8727
Tags: Cisco Wireless
Similar Questions
-
Unique SSID from the multiple SSID
Hello
We seek to deploy wireless at five sites great campuses, one in each State.
Does anyone have any ideas on the deployment unique verus multiple SSID SSID for each location.
Are the benefits of filing a return and security to identify red devices associated with
a unique SSID.
The question was raised that it would be easier to configure one SSID to scan wireless
devices that have separate SSID different places.
Would appreciate any experience on this design
Mate,
Remember, when you're dealing with WLC, you do not configure the APs. You configure the WLC and configs will be propatated of all APs manages the WLC.
The WLC, you can use up to 18 SSID but you can configure 1 024.
Currently, I have three SSIDS and one of them is for VoWLAN.
Moreover, some hand scanners do not like the (hidden) SSID broadcasting.
-
Hello
I have an AP 1252 and I wanted to know what I need to do to set up to broadcast multiple SSID
y at - it something I need to do on the web interface or something through CLI. Thanks in advance
and have a great day.
Please copy - paste the 'controllers to see the output. This will let us know if we can or we cannot broadcast multiple SSID.
The command to enable this featute is...
AP (config) #int dot11 0
AP(Config-if) #mbssid
SSID #dot11 AP (config)
AP (ssid-config) #no - guest mode
AP (config-ssid) #mbssid - guest mode
SSID #dot11 AP (config)
AP (ssid-config) #no - guest mode
AP (config-ssid) #mbssid - guest mode
This will do
Concerning
Surendra
-
About WLC "one-to-many" designates a LAN VIRTUAL mapped to multiple SSID possible?
The Cisco Wireless LAN Controller Architecture includes this feature (possibility of configuration)?
You can map multiple SSID to a VLAN, but you cannot map several VLANS on a SSID.
-
Multiple SSID on AIR-SAP702I-E-K9 (700 Aironet Access Point)?
Hello community
I wonder if it is possible to simultaneously run multiple SSID (actually 3) on a single Cisco AIR-SAP702I-E-K9, which is a standalone AccessPoint (AP). Each SSID should be linked to a different VIRTUAL LAN. Or do I need another model or even an AccessPoint driven by the controller to run multiple SSID on different VLANS to the same AP?
Thanks in advance.
Kind regards
AdrianHi Adrien,.
Yes, you can have multiple ssid on the AP standalone. Each SSID must be mapped to a VLAN different.
Kind regards
Shubham
Please do not forget to note positions that answered your question and mark as answer or was useful
-
BVI Interface inaccessible since the addition of multiple SSID
Announcement to the community for the first time.
I have a simple HomeLAN which consists of a Cisco router for series 800-> switch PoE Cisco3560-> Cisco Aironet 1131AG Access Point.
Everything works well for a while in which I had a simple port to "change the access mode" configured on the switch facing the AP and one SSID on the access point that is configured in stand-alone mode (without controller).
My provider has enabled IPv6 on my broadband connection and I started to reconfigure my installation this afternoon to allow this.
I decided to run only a bunk Dual LAN and a separate native IPv6 only test LAN for proof of concept.
With this in mind, I changed the switch port to the access point to a "mode trunk switch' using simple dot1q encapsulation. I have also consulted the post helps very https://rscciew.wordpress.com/2014/05/24/multiple-ssid-configurations-on... after finding in this community post on the topic of multiple SSID https://supportforums.cisco.com/discussion/10899511/how-broadcast-2-ssid...
I have now two SSID broadcasting (we will call double stack and ipv6 only for the sake of the argument). The SSID double stack uses VLAN 2 and 1 bridge, while the SSID only ipv6 uses 6 VLAN and bridge 6.
I must stress at this point that my router (where I want to layer 3 for the two LANs gateways) I have DHCP, DHCPv6 and SLAAC configured on relevant VLANs.
I seem to be the 2 VLAN trunking of properly and I can see the SSID broadcast in my house. I can connect to the SSID (authenticate and form an association as seen in 'show the dot11 association'), but I don't get an IPv4 address or IPv6 assigned to all clients (I tried Mac OS x, iOS, Android, and Windows phone). Furthermore, I can't ping the IP bvi1 of the AP - that is the element that is annoying me more that I must console to the AP to make any changes at all.
Here is an overview of my AP configuration, with relevant parts removed for safety...
dot11 syslog
!
dot11 said ipv6 only
VLAN 6
open authentication
shared authentication
authentication wpa key management
MBSSID-guest mode
WPA - psk ascii 7
!
dot11 said double stack
VLAN 2
open authentication
shared authentication
authentication wpa key management
MBSSID-guest mode
WPA - psk ascii 7interface Dot11Radio0
no ip address
no ip route cache
!
the cipher mode vlan 6 encryption tkip aes - ccm
!
the ciphers of vlan 2 encryption tkip aes - ccm mode
!
has declared ipv6 only
!
such double stack
!
MBSSID
root of station-role
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
Bridge-Group 1 covering-disabled people
!
interface Dot11Radio0.2
encapsulation dot1Q 2
no ip route cache
Bridge-Group 2
the bridge-group subscriber-loop-control 2
Bridge-Group 2 block-unknown-source
No source of bridge-Group 2-learning
No extinction unicast by bridge-Group 2
Bridge-Group 2 covering-disabled people
!
interface Dot11Radio0.6
encapsulation dot1Q 6
no ip route cache
Bridge-Group 6
the bridge-group subscriber-loop-control 6
Bridge-Group 6 block-unknown-source
No source of bridge-Group 6-learning
No bridge Group 6 unicast-flooding
Bridge-Group 6 covering-disabled people
!interface FastEthernet0
no ip address
no ip route cache
automatic duplex
automatic speed
Bridge-Group 1
No source of bridge-Group 1-learning
Bridge-Group 1 covering-disabled people
!
interface FastEthernet0.2
encapsulation dot1Q 2
no ip route cache
Bridge-Group 2
No source of bridge-Group 2-learning
Bridge-Group 2 covering-disabled people
!
interface FastEthernet0.6
encapsulation dot1Q 6
no ip route cache
Bridge-Group 6
No source of bridge-Group 6-learning
Bridge-Group 6 covering-disabled peopleBridge IRB
1 channel ip bridge
interface control2
MGMT AP Interface Description
address 192.168.1.6 IP 255.255.255.0
no ip route cacheIP default-gateway 192.168.1.50
As you can see I can not ping the gateway of AP - I would be very grateful if someone could point me in the right direction with regard to what I'm doing wrong here?
Thank you
Mick
OK means your AP is to have IP vlan2:
Do it like this and try again:
!
interface Dot11Radio0.2
encapsulation dot1Q 2
encapsulation dot1Q 2 native
Group 1 bridge
Bridge-Group 2
!
interface FastEthernet0.2
encapsulation dot1Q 2
Group 1 bridge
encapsulation dot1Q 2 native
Bridge-Group 2!
Or alternatively, you can delete the name native dot11radio0 and fa0.2. (It should also work without it), but be sure that for vlan 2 you have bridge Group 1.
Concerning
Remember messages useful rates
-
Multiple SSID for AP in light mode
Hello
I tried to configure an AP that is light to have multiple SSID mode, as I do with autonomous AP but I couldn't, is it possible for an AP in light mode to have multiple SSID? If so, how can I do that?
Thanks in advance for your help.
supported wireless LANs is 512 and the AP you're just 16...
http://www.Cisco.com/en/us/docs/wireless/controller/5.2/configuration/guide/c52wlan.html
-
How can I actually speak to technical support issues to nulitple with multiple devices (software, hardware, account problems,) I have a touch screen of hp with windows 7 Home, Ipod, home router wireless, boost, WiFi, wii, etc.... Problems with windows live net Passport vs msn Id, problems with zune vs itunes and windows media that nobody wants play nice together.
My touchscreen notes will use only a google account, music another program, and of course until recently google was not an option on the windows phone. of course if I'm going now that I'll lose all the games and music. His tent so frustrating of any help, that nobody seems to know how often these devices and programs interact (or care) HP has been of little use, even for my provider windows, microsoft, living cells and zune etc...
All the changes that took place this last month will help but gets boring. I consider myself pretty computer savy, but maybe not, should not this difficult. I realized about a year ago I would have hired a technician but it seems immpossible to find someone who knows enough about all of the equipment and software to really do some good. My Hp touchscreen computer does not even play nice with their own HP printers. I really regret the time and money I spent. I could every Mac.
All of the suggestions. Even your options do not address several problems of interaction with the hardware and software all needs of problems to adapt to a single category.
Hello
To correct the software issues run the methods mentioned below.Method 1: run the troubleshooter and check if the problem is resolved.
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter
Method 2 : run a SFC (System File Checker) scan and see if the problem occurs.
http://support.Microsoft.com/kb/929833
Method 3 : run Clean boot and check if the problem persists.
To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
Note: follow step 7 to reset the computer to start as usual after the boot process.
http://support.Microsoft.com/kb/929135To solve the problems related to Windows Live and MSN to check the links below on contact.
After the question in the links below
http://support.Microsoft.com/kb/940784
http://windowslivehelp.com/To solve the problems related to the HP touch computer
Update the HP touch drivers from the manufacturers Web site.http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
If you need to talk to a Microsoft technician, then you can check the link below http://support.microsoft.com/kb/295539
Hope that helps. -
Address issues of multiple files
Hi all
I have tried to treat multiple files with PSE9.
My purpose was to:
DNG source files
Photo optimization, add a tag at the bottom left and record results in high quality jpeg files in an empty directory.
The result I got is:
-applied optimization
-Tag not included
-for each file a pop-up windows required a location to save the file (psd format)
-No product jpeg file
I do not understand what Miss me coded so that I don't have my JPEG files.
How can I avoid the pop-up phase?
Kind regards
Thierry
Thierry,
I do not have PSE9, I am very happy with PSE6 Win XP... and with PSE6 if you tried to process several files with 16-bit and jpeg, the program would freeze and stop without warning!
I guess that Adobe changed this behavior to automatically offer a compatible with 16-bit format: psd or tiff. If my assumption is true, they could have issued a warning message explaining this.
-
Multiple SSID in Linksys E2500
I just bought a Linksys E2500, and I'm trying to set up several top SSID. The "guest" mode does not work for me because I want an SSID to use WPA and the other to use WEP, but the ability to set different encryption based on frequency GHz of the connection does not work for me because I want only the WEP key to be used by my Nintendo DS (which does not support WPA); I don't want to force all devices that do not support the 5 GHz for use the WEP key it! Is it possible that I can do this, or am I out of luck?
DD - WRT forum is full of info on aid.
Usually with some care, you should be able to return to the firmware of Cisco stock.
Install third party firmware will void your warranty, unless you are able to get back to stock firmware :-)
Here's the thread E2500:
http://www.DD-WRT.com/phpBB2/viewtopic.php?t=140536
Sorry I him have not read completely.
-
Create multiple SSID - WLC - ISE 1.4 comments
Hello
I wonder if there is a way to create several comments about WLC SSID with specify policy on ISE 1.4?
I tried to create 2 comments SSID with 2 policies. The point is that it is the first policy that matches any SSID.
Any idea?
Concerning
Eric
Add airespace-wlan-id to your strategy on the ISE, ISE will use the WLAN-id to match the correct strategy
-
Multiple SSID with 702 (standalone)
Hi all
I'm setting up a (standalone) 702i Aironet to broadcast 2 SSID on both radio interfaces.
The first (private) SSID is secuered with AES and is assigned to the 1 VLAN (VLAN native)
The Second SSID (Public) is free access and assigned to VLAN 50
Router is a Draytek 2860
Switch is a Netgear M4100 with the Aironet on fa 0/1, marked for both VLAN. And the router on Giga 0/1, unidentified.
The AP config is attached
Thank you
Try to remove the mobility network id and test again.
-Scott
-
WLC 2504 several VLANs multiple SSID
I have three sites
Data center management unit A - main - controller + Access - Point IP 172.16.x.x - Vlan 38
Unit B - system managed by controller IP 172.17.x.x - Vlan 38 Access Points
Unit C - system managed by controller IP 172.18.x.x - Vlan 38 Access Points
In the network topology OSPF runs. We have several VLANS about 38 we wish to propagate through SSID, but maybe I'm not create more than 16. How to make a movement of the user of a unit for unit B how do mention Vlan IP for the user because it is 38 Vlan spread on each unit.
UNIT A - UNIT B - UNIT C
| | |
172.16.X.X 172.17.X.X 172.18.X.X
| | |
VLAN 2-38 VLAN 2-38 VLAN 2-38
| | |
AP-1 AP-2 AP-3
| | |
User to user-1 user-2-3
Need of advice and suggestion
Hello Saad,
If I understand your scenario, you have 2-38 or 16 VLAN for each unit. To ensure exactly the addressing specific IP must be assigned to the user, you must create groups of AP and add AP group particular AP. Let's say for the 1st floor that you used the subnet 192.168.1.0/24 and AP-group1 so all the first floor AP will be in AP group1. In addition to browse documents cisco you will get any idea on AP groups concept.
In order to obtain roaming when users move from one unit to another unit we configure mobility in the controller. As OSPF is already running then you have reach-ability between the controller.
Hope this information helps you.
-
WPA - 2 Enterprise multiple SSID / multiple groups
Hi all
I don't know if it is in the right section so forgive me if it's not good.
I am currently trying to setup WPA-2 Enterprise using a 5.x ACS server. The bases have already been completed. I have everything set up such that if the users are in a certain group, they can connect to the radio. The question that I am running to try to ensure that only certain groups can connect to some SSID
I know that the GBA, you create an object of the AP network (we use Meraki APs if the request comes from the AP directly) and give her a key to RADIUS. After this, you assign the AP to a device group. Then, create you a political access that maps to a group of devices. My question is that, on this basis, demand will reach the ACS server with the source IP address of the AP and then correspond to the access policy and allow any group in politics to connect to any SSID. I'm trying to figure out if there is a way I can set up a rule to say that if the request is from a specific SSID, then use this authorization profile as opposed to the other or something like that?
I can not give the information in a way that makes sense for everyone so please do not hesitate to ask other questions you may have.
Any help is greatly appreciated.
Thank you
/ E
If you can configure some policy based on 'called-station-id' this can be done. This field contains the SSID field
http://mrncciew.com/2013/07/22/called-calling-station-ID/
HTH
Rasika
Pls note all useful responses *.
-
One multiple SSID VLAN. Is this possible?
Hello
Is it possible to have one SSID of the wireless network but when users associated with the Wlan have access to different VLAN?
It will run with a WLC (Wireless Lan Controller) and a Cisco secure ACS.
Yes, by using assignment vlan dynamic with Radius, see link for detailed configuration:
http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml
Maybe you are looking for
-
HP 240 4: forget the BIOS password
I forgot the BIOS password. After the connection of 3 failures, he told "[I 51275424] '. (not sure if the first letter is 'I' or '1') Can someone help me to unlock it?
-
I have my volume up to the largest, but it is always difficult to hear something even with headphones! Someone help me? Thank you {Information}
-
Problems with services of automatic startup after Windows Update problem
These are probably related to many things I tried trying to solve the problem of Windows Update - until I found the answer to Fix It. That fixed my Windows Update, but now I have these problems. I tried to run the bat file that Sohail suggested in t
-
I have a new HP Photosmart C7280 and simply want to scan 1 page. Help!
When you select 'DOC to the file' where the file records on? The system scans my doc very well, but when it's over I have no idea where he saved the scanning to? I want email JPG or PDF scan, but have no idea where he is there to save? Can I get
-
Change the system in 24-hour format time
I can't change the icon of the system clock in the lower right from desktop to a time format 24 hours a day. I changed it on the tab of the region and when I check to see if it is still changed, it is changed in the pop-up window, but it does not cha