Issue of PIN entry

Similar Questions

• Issue of calendar entries sharing with groups of BBM blackBerry Smartphones BB Curve 8520-

  Greetings!

  I am currently using a BB Curve 8520. I have a problem with the birthday entries sharing with my BBM groups.

  When I add a birthday entry to my contacts from the phonebook, the phone will ask whether or not you will share this date with the BBM groups calendar.

  If I select No., birthday entry will continue to BE SHARED to your BBM groups.

  So I have to go to the calendar of the BBM groups to delete manually created entry.

  Can you help me to solve this problem with my phone?

  Thanks in advance!

  Hi, Ahmed.

  Follow the steps; below

  1. take a full backup of your device.

  2 reset the device (Do a security wipe)

  3 register your device with Netowrk.

  4. return the maintenance book.

  5. If more than one e-mail account then delete pulled CICAL service book of reset. (but keep a default for CICAL service)

  6. now, do a restore advance except BBM GROUP and data.

  7. now, create a new entry in the calendar.

  Please read the following threads for more info:

  http://supportforums.BlackBerry.com/T5/BlackBerry-App-World-General/calendar-issues-BBM-Group/TD-p/6...

  Courtesy: Santosh-Boiro

• Smartphone blackBerry bold 9000 locked, numlock on, problem of PIN entry

  Hello

  Last week, I have a BB Bold 9000.

  I have a problem when my BB is locked.

  I try to unlock with my PIN that contains characters.

  The number lock is enabled, while the numbers are entered, which makes it rather difficult to release.

  Someone has any idea how deselect numlock when the BB is locked?

  KR

  HJ

  Hi Tanzim

  I tried again and now I understand what went wrong.

  normally when I unlock I have to put my password after the BB asking me to do.

  I did it when the BB requested my PIN, but obviously this is not equal to my password...

  I typed the generic PIN for BB and it worked; Deselected NumLock and I could enter my password.

  Thanks for the reply. It opened my eyes to try something different.

  KR

  HJ

• Issue of text entry.

  Hi, I have problems with the function of text entry, I had created a comment field but when typing go in a single line.

  I would like to know if theres any way to alow typing in more than one line in the same text field.

  Sorry for my English, thanks.

  I tried the following which resulted in an editable multiline text field (after the change of code in Flash Builder)

  1. Created a text input in CF and resizes to display multi-line
  2. Fc .fxp file imported from Fb and passed (in src/Main.mxml) under the following line of code:

  s:TextInput height = "244" text = 'my text field.' width = "431" x = "191" y = "173" / >

  TO

  s:textarea height = "244" text = 'my text field.' width = "431" x = "191" y = "173" / >

  If you now run your Fb app, it will result in an editable multiline text field.

  Be sure to do it when you have finished the layout and design of your interface in Flash Catalyst. Once you move to Flash Builder, this is where you fill in your application.

  I hope this helps.

  Tanya

• Issue of digital entry behavior

  PCI-6143 with wheel wired to PFI0 & PFI1. LabVIEW pgm written in 8.5 full. Source code works well (on other Web development pages

  computer with USB-6211 card) but hangs, as is eating 100% cpu time in the destination computer. This machine it must run on a LV 7.1 installed and some 7.1 executables. I installed DAQmx 8.8 on this machine with LV 8.5 support. I'm trying to run the executable on this machine that LV 8.5 is not installed.

  If I enter MAX, select the card and run test panels, I get conflicting results. If I choose digital IO on both channels 1 or 0 I constantly receive all 8 lights. There is no signal. But if I'm going to count, use the trigger channels and count the edges I activity. Am I missing something? I need to remove these problems before you start to screw up my source code to find a bug that does not exist.

  
  

• Infinite loop - Restrictions PIN forgotten, can't stop to find my iPhone for restoration

  I have an iPhone 6 for my children. I forgot the PIN code for restrictions affecting. When you make selections for the restrictions, I put it that nobody could change anything without my PIN entry for restrictions. So, it would mean that 'Find my iPhone' cannot be disabled without knowledge of the PIN for restrictions.

  The easy solution is to restore the phone. However, in order to restore the phone, I received instruction to turn off "find my iPhone". So, I'm stuck in an infinite loop. I've seen several recovery programs, but some lead to links that were not there, others have asked me to pay for the program, and others seemed questionable.

  Any suggestions would be welcome. Thank you.

  You have to force into recovery mode to restore.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• T420 and Winodws 7 Bitlocker with TPM and PIN

  Hello

  I had a few T420 ThinkPad and you want to use Windows 7 bitlocker, TPM and PIN code.

  The problem is, after the reboot to test the PIN code, I always get the message that the PIN is incorrect, and I have to restore with recovery key. After that Windows tells me I should use a PIN with numbers.

  But my goal is to use a ROD with numbers, special characters...

  For example, a PIN with only numbers work.

  Netscape,

  It works for me with American keyboard.  So I was wondering if there is a problem with the German keyboard.

  http://TechNet.Microsoft.com/en-us/library/ee449438 (WS.10) .aspx

  «We recommend that users set their EN-US keyboard when the PIN entry reinforced to avoid entry failures PIN in the pre-start-up environment.» If you are unable to enter a PIN improved since your keyboard even after affecting the US keyboard layout, you must use a digital-only PIN. »

• Dell Latitude 10 Netgear PTV3000

  Is there a known issue for Dell Latitude 10 not being not able to connect successfully to a Netgear PTV3000?  I tested it after updating Windows 8.1, but the WPS PIN entry is the farthest I could get.  It will not be displayed to all Windows 8.1 or choice in the project/view devices.  My android phone can connect to the PTV3000 flawless.  Thank you.

  Hi Bashdrew,

  I searched this for you, and unfortunately the Latitude 10 does not support the Miracast.

  Sorry

  Colin

• HP Pavilion Elite e9180t CTO D: Will Graphics card work with my desktop computer

  I have a HP Pavilion Elite e9180t CTO Desktop PC - AV321AV-ABA e9180t

  Windows 7 Ultimate 64-bit Service Pack 1

  Intel Core i7 CPU 975 3.33 GHz

  ATI Radeon HD 4850

  Motherboard: TRUCKEE 1.04

  System BIOS: 5.29

  To activate the ray-tracing on the GPU, Adobe After Effects requires a graphics NVIDIA and CUDA 5.0 or later approved.

  An NVIDIA representative recommended a GEFORCE GTX 780.  The PNY Graphics Card VCGGTX7803XPB video will work with my desk?

  Hi there @LeoOfMars
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff. I understand that you are looking to find out if a video card is compatible with your information system. I'm happy to help you with that.

  The main reasons to be sure of are normally feeding you, special (to THE) cable power supply for the graphics card, on the motherboard compatible expansion slot, the drivers for your operating system, another thing to know is the physical size of the map, for moments of cases.

  Looking at the specs of your system and the motherboard by default, I listed the type of slot of power and expansion.

  HP Pavilion Elite e9180t Desktop PC product specifications and configurable Options

  Output power of power: 460 Watt

  HP and Compaq desktop PC - specifications of the motherboard, IPMTB-TK (Truckee)

  Two graphics PCI Express 2.0 x 16 (for graphics cards)

  Go to the video card you are looking at:

  GTX 780 3072 MB GDDR5 PCI-E 3.0 OC Custom cooled graphics card

  Input power: 1 x 8-pin auxiliary input aux input 1 x 6-pin
  Bus type: PCI-Express 3.0 16 x
  
  System requirements:
  Mother compatible PCI Express with a slot of chart double-width x 16
  Power 600W minimum (with a minimum of 12V current rating of 42A) 3
  300 MB of available disk space
  2 GB of memory system (4 GB or more recommended)
  Microsoft Windows 8, Windows 7, Windows Vista, or Windows XP Operating System (32 or 64-bit)
  DVD-ROM drive or Internet connection for installation
  DVI, HDMI, DisplayPort or VGA compatible monitor

  So on a quick inspection of both devices there are three problems, so this card will not work on your motherboard or with the current power.

  I hope this helps.

  1 x 8 pins, entry to aux in, 1 x 6-pin

• 2012 mac pro drive whining/spinning

  I have a 2 TB Western Digital drive with an installation of Windows 8 on it which has failed to start several times with an error indicating that the disc was bad. now when I boot on mac OS, I hear that a relatively high slope spinning/whine that comes from this disc.

  I went to this page

  http://www.datacent.com/DataRecovery/HDD/western_digital

  and after listening to the sounds it seems that this is the problem:

  Western Digital disks also have a common problem with PIN entry. This occurs after a fall and the reader either is not turn at all with the siren sound: or starts with a strong unable to earn enough noise speed control:. Data recovery in this case is to remove trays from the hard drive in a clean room environment and put them into donor. This complex and precise procedure requires a lot of experience and the use of specialized equipment to maintain the trays in perfect alignment.

  I thought /had/ I have all the readers of "Black Caviar", but it says not black. It's WD2002KAEX SATA 64 MB of CACHE memory.

  can someone help me understand what I need to do.

  1. for example I really want to have to install my WinClone support since I don't think that I even put any software on this drive yet.

  2 should I get only the WD Black Caviar drives in the future or can someone tell me the info above what type of drive it is?

  3. no doubt my options here are whether the car is under warranty and return it for a new?

  4. install the new drive and reinstall windows 8?

  Thanks for any help, info, support, etc.

  bad luck. o guarantee

  WD2002FAEX

  WD Black

  29/10/2012

  The warranty

• DAQmxCfgSampClkTiming NICARD 6031 PCI E and Visual C++ 6.0

  To the attention of the customer or any other wellcome! -):
  
  I use a NICARD 6031 E PCI. I am also using Visual C++ 6.0.
  I declared a variable for an external CLOCK of SAMPLING ANALOG. I am providing
  This CLOCK signal to the Dev1/PFI7 PIN entry
  m_sSampClk (_T("ai/SampleClock"))
  I'm not using this variable now and that's why is commented. Instead, I
  Just call/Dev1/PFI7 below in the routine.
  I use the following routine for EXAMPLES of input based on the
  external CLOCK Signal enter PIN Dev1/PFI7
  nErrorCode = DAQmxCfgSampClkTiming (m_hAnalogTask, //task handle
  ' / PFI7/Dev1 ",  //Sample ATMEGA88 clock (AI SAMP CLK)
  50000 points in rate (float64) //Sampling per second
  DAQmx_Val_Rising, samples of //Acquire on the rising edges of the
  Sample clock.
  DAQmx_Val_FiniteSamps, //Finite for the buffering mode
  timing acquisition
  (128); 128 samples per channel
  if(nErrorCode!=0) met //error
  {
  DAQmxGetErrorString (nErrorCode, szErrorMsg, 1024);
  AfxMessageBox (szErrorMsg);
  }
  Can you please let me know if my routine is correct and I didn't need to
  Declare a variable for SAMPLING CLOCK because I call the routine
  directly? I looked for examples on your Web site, but I find that LABVIEW and
  no examples of Visual C++.
  Kind regards
  Javier Contreras.
  

  
  

• Help with LM358 op amp circuit

  I'm simulating a circuit using LM358N op amp to amplify the signal of the IC NE555P timer and then this signal amplified to switch the LED by a transistor switch.

  In theory, I think that when the key switch is off, there must be no signal no signal go to Terminal B of the BJT, then the LED will due to a BJT implementation, but in practice, when I turn off the key, the voltage at the Terminal B of BJT is always 1.58V and it causes the LED and not through LM358 on.

  I have attached the image and my simulation here, please take a look and any help will be appreciated.

  Thanks in advance.

  If you use your probe and measure the unfinished not reverse input of U3A pin, you will see ~ 800mV which corresponds to the offset entry of tension.  It is amplified and why you see ~1.6V. Engineering best practices is to not leave entry is not complete so add resistance of 1Kohm ashore to the no reverse input of the U3A PIN. Now measure the PIN entry and see the difference.

• Call from Microsoft Security, is it a scam?

  I got a call from "Microsoft Security", informing that my computer has been hacked and tried to get me a "pin" entry that they would provide. When I wondered where they were on they notify that they were "security for Microsoft" I didn't responded and asked a phone number back to them. The number is 253-220-7222, but I was not called again.

  I suspect that it was a scam. Do you have any advice?

  Hello

  Yes, it's a SCAM!

  Avoid scams to phone for tech support
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  The Internet Crime Complaint Center (IC3) is a partnership between the Federal Bureau of Investigation
  (FBI) and the National White Collar Crime Center (NW3C), funded in part by the Bureau of Justice Assistance
  (BJA).
  http://www.ic3.gov/complaint/default.aspx

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• 15 - a010sb of Compaq notebook pc: BIOS settings change

  I would like to change the Bios settings.

  I would like to first of all "Safe Boot" to DISADLED

  When I do, I get a screen with this text:

  Change of operating system startup Mode

  A change in the Safe Mode to Boot operating system is pending. Please enter the code displayed below to complete change. If you do not have this application, press the ESC key to continue without accepting the pending change.

  Change of operating system startup Mode<021>

  6856 + ENTER - to complete the change

  ESC - continue without change.

  BUT I don't know how and where I can type "6856 + enter."

  I try to type the keys, but noting happens on the screen.

  Please help me

  Tanks

  Hello

  I would say running through the procedure again as follows.

  Shut down the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug the power adapter

  Demarrer start in the bios menu, disable Secure Boot and save change - then see if the subsequent PIN entry screen will be the entry.

  Kind regards

  DP - K

• Registry DWM.exe error at startup

  I get a registry error message whenever I start my desktop computer.

  The error message is: 'cannot load or launch 'C:\Users\admin\AppData\Local\Temp\dwm.exe' specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry. »

  This problem started after I ran SuperAntiSpyware. I tried to use CCleaner and Advanced System Care programs to fix this registry, but they did not work.

  How can I solve this error?

  I want to be careful to make changes to the registry.

  My PC is an HP m8120n under Windows Vista Home Premium desktop.

  Solutions:

  1. upgrade the graphics card drivers
  2 repair the registry
  3 run the 'Desktop Service Manager' Service
  4 disable the DWM. Boot to the EXE file entry
  5. run some commands
  6 analyse the system files for Corruption
  7 restore the system to a previous state

  Update graphics card drivers

  To correct this error, try upgrading your graphics card. Visit the manufacturer's Web site and download the appropriate compatible drivers for your computer.

  Or otherwise,

  1. click on start.
  2. type device manager in the start search box.
  3. press ENTER.
  4 expand your computer name, then the graphics card.
  5. right click and select the update option.

  Repair the registry

  Repair the registry by using a good registry cleaner software.

  Run the 'Desktop Service Manager' Service

  DWM. EXE error may occur if the Desktop Manager Service does not work. Start using Services Manager this service as shown below:

  1. download System Utilities software.
  2. click on the Service Manager tab.
  3. Select the desktop Service Manager service.
  4. click on the Start button.

  Disable the boot file entry

  In case your antivirus program deleted a virus infected, but have not deleted the corresponding Startup registry keys, this error can occur. To resolve this issue, disable this entry.

  1. click on start.
  2. type MsConfig and press ENTER.
  3 click the Startup tab and uncheck the entry with the file.
  4. click on apply. Ok.

  Run some commands

  Execution of orders supplied with the command prompt can fix DWM. EXE error. Follow these steps:

  1. click on start.
  2. type command prompt in the search box.
  3. press ENTER.
  4. Enter the following commands:
  CD %windir%\system32
  WScript slmgr.vbs - rearm
  5 restart the computer after the end.

  Scan the system for Corruption files

  DWM. EXE error may occur when the DWM. EXE system files is damaged. Replace this file with the original version can fix the error.

  1. Insert the Microsoft Windows installation disc.
  2. click on start | Run.
  3. type SFC/scannow, and then press ENTER.
  4. follow the directions in the wizard.

  Restore the system to a previous state

  By using the system restore, restore all changes made to your system to a previous state. Here are the steps to fix the DWM. EXE Error:

  1. click on start.
  2 type system restore in the search box.
  3. press ENTER.
  4. follow the instructions of the wizard your own.