15 - a010sb of Compaq notebook pc: BIOS settings change

Similar Questions

• BIOS settings changed by a cheater

  Dear Sir, I had given him a laptop for repair in a store (I couldn't give it to an authorized service center as there were none in are, I was assigned), this person has fiddled around with my bios settings. It has removed the name. ID of product and other such information of my laptop. I am now unable to use my recovery disks. How can I solve the problem. Can I Khalil information manually? Please, I'm waiting for a quick response

  Thanking you,

  Yours sincerely,

  Amit

  PS - There is no of authorized service center in the area I posted

  This is not official HP customer service. It is a forum for users of peer-to-peer supported for HP consumer products. HP maintains no official presence in this forum. It is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  When you request support, please provide the number of name and/or product of comprehensive model of the HP computer in question. HP/Compaq made thousands of computer models which are all different. Without this information, it can be difficult, even impossible to help you solve your problem.

  I doubt that the repair shop is a cheater or that they "tinkered" with your BIOS settings on purpose. Many times when a BIOS update is done, there is a risk of deletion of the HP "tattoo" in the DMI data area. I suspect that this was done on an accident or without the shop even knowing what happened. To resolve this problem, the computer must be "tattooed" with serial number, p/n, the name of the model, SUBMISSION/BOM, etc.. This is possible only by HP or to authorize service center.

  There is a way around this, but it requires installation of Windows from an installation disc of Windows and using the product key from the COA Microsoft on your computer. Once you provide the model product nbumber and name of the computer, we can point you in the right direction.

  Please send Bravo

• Portege R600 - BIOS settings change window.

  Hello

  I have a question. Y at - it all possebility to change settings in the BIOS of a R600 with a tool?

  The best would be to something that uses a command line / / can be opened with parameters.
  I would like to change to Tower about 100 machines remotely--> I certainly would need a tool for this.

  Thank you!

  > I have a question. Y at - it all possebility to change settings in the BIOS of a R600 with a tool?
  Short answer: no, there are no tools tending to alter the BIOS.
  The developers of Toshiba are abele to change and modify the BIOS but these tools are not available for download.

• Satellite A300 - BIOS settings incorrect error during recovery

  Hello

  New to the forum, I had a search around so im hoping someone can help me.

  I have a Toshiba Satellite A300 PSAGCA and trying to resize a partition my computer become unresponsive and since then I can not load Windows Vista. When the computer starts it comes up with the error "interrupted operation: insert the Recovery CD.

  So I used the restore CD that was with my program of partition but I get a different error message saying "Incorrect BIOS settings change video buffer size" which I cannot find in the BIOS and no help from their support.

  If im now doing a Toshiba Recovery and restore my laptop, but I can't get into recovery. Holding F8 during startup to show the boot advanced options, or not taking '0' as ive read its supposed to.

  Any help would be appreciated!

  Thank you

  Can you please tell me how you tried to resize the partition?

• G7-1070us notebook Pavilion: Bios screwed up on update.

  Last night 07/20/15 bios has been updated and is now screwed, restart auto constant that happens and say that there is a bios problem.  Software of the BIOS on this site shows an older version.  How to fix?

  Hi @lone_lobo,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion g7-1070us Notebook and questions with a BIOS update. I recommend to restore the default BIOS settings. You could restore the BIOS withthis document by selecting the reload the default BIOS settings.

  I hope this helps you.

  Thank you.

• BIOS does not detect not hard drive for laptop after the setting of the default BIOS settings.

  I had my 14.04 installed Ubuntu in my laptop in a reader named «Notebook hard drive» a pre-installed Windows 8. Today I put the default BIOS settings in my phone and when I rebooted it and tried to use Ubuntu by pressing 'F9' key and choosing from the menu of the BIOS I found my 'Notbook HDD"option missing. My disk of Ubuntu is still there, but I have no way to access it. Is there a way I can get it to work?

  Try turning off secure in the BIOS and then start by restarting the laptop.

• Supervisor password and BIOS settings

  When I boot into the bios via esc and F1, it doesn't let me go to all other pages, said the supervisor password is saved but does not prompt you to enter a password for the supervisor to make changes. I updated the bios to 2.0 version, but that didn't make a difference. I need to change the boot order but can not enter to change.

  Someone at - it ideas? How can I force to ask the supervisor password? Or let me go on other pages?

  Thank you

  Hello

  Are you sure you didn't put any user or supervisor password?
  Usually, you can remove it by using the password of Toshiba utility.

  In Toshiba Assist-> Secure, you will find the supervisor password and user password option.

  Remove these passwords in order to obtain full access to the BIOS settings

• Satellite R830: How do the BIOS settings password protected?

  Hi all

  I installed a software protection against theft in my Satellite R830, but he suggested that I adjust the settings in the BIOS so that it will start only from the hard drive, and to make sure that no one else can modify it (if it is stolen), the BIOS settings are protected by Word.

  Can someone tell me how to access the BIOS at startup settings upward?

  Hello

  You can set the BIOS settings by setting the BIOS password.
  If someone would like to change the BIOS settings, the password of the BIOS would be necessary.

• Re: Satellite C850 and UEFI BIOS settings

  I have laptop Satellite C850 - 1 2 with Windows 8.1

  When I boot, it shows a toshiba logo, not the original flag 8 Windows. It is not so much a problem, but I can't change because the parameter is blocked within the parameters of the UEFI. How can I change this?

  I already tried to change through the windows in different ways, but each time it will change the UEFI!

  Help?

  To be honest I don't know what to do, you mean with blocked settings, but it can be changed in the BIOS settings.
  What you need is to make complete OS stop http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm and after having done that, you can restart the laptop and enter the BIOS (try F12) settings and then you can change all the settings of the BIOS.

• SP A10 - using the BIOS to change the graphic settings

  Hi all

  How do you change the graphics settings on an A10 SP from 16 MB to 64 MB? I guess this is done in the Bios but I can't seem to enter the just did F2 key appear the boot options.

  Aid is graetly appreciated.

  Hello

  Please use the ESC key to enter the BIOS settings.
  You should see the option to increase the shared graphics memory.

• Satellite L755-129 and Win8.1 - cannot access the BIOS settings

  Hello

  I have a L755-129 satellite and I have the version of windows 8.1 update in my laptop. I want to open the bios of my computer and I can't do it?

  What is going on? Also I can't find in the windows recovery Panel. Key F2 and F12 does not work, when I press it, the laptop starts beeping beep and starts in windows.
  Can someone help me? I don't want windows 7 I like windows 8.1.

  Thank you for your help

  It's really good that you posted this question. So far on this forum many people ask the same questions, but all have been at the origin of new machines of Win8.
  Now we have the situation with the old machine Win7 but with Win8 preinstalled.

  Solution for other people needed to proceed to a complete stop and after doing this, it was possible to enter the BIOS settings. Check it please http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm

  This situation does not for me so here's a question for you:
  When you start your laptop, I guess you can see the Toshiba start screen. With F2 option is shown on the bottom of the screen?

• BIOS settings - Satellite M30

  Hi, I have
  wondering how I can access the BIOS on a Satellite M30 laptop?

  If anyone can it would be greatly appreciated b.

  Thanks in advance,
  LAD.

  Hello

  To enter the BIOS settings on Satellite M30 please press F2 while the laptop starts.

  Good bye

• Compaq Mini 110 Bios password?

  Hello

  Compaq Mini 110 Bios password?

  s/n [personal information]

  Hello

  You can try reseating the CMOS/RTC battery on the unit and see if the problem is resolved.

• Dynabook: How to enter the BIOS settings?

  I have a CRC Dynabook V2/470. How can I get into the BIOS
  settings on this laptop?

  Hello

  This device is not known to me, but I guess that you can enter the BIOS setting by pressing the F2 key or ESC in combination with F1.

  Good bye

• Envy x 360 laptop: HP Notebook System Bios update system (Intel processors) could not be updated

  I get an error of update failed trying to imstall the next update:

  HP Notebook System Bios update system (Intel processors) Impossible to update

  Is there a way to properly update this? What is a critical update?

  Thank you

  Anthony

  Hi @WildFan,

  Thanks for getting back to me.

  Yes, I can give you links to the downloads.

  Updated HP Notebook System BIOS (Intel processors)

  Driver and Intel Chipset Installation utility

  Hope that help.