Issue of reconciliation of target

Similar Questions

• How to upgrade the IOM user profile fields after the reconciliation of target user AD

  Hello

  I have a problem of set-aside. When I'm changing the values of the attributes of the user in Active Directory and then I run Active Directory target user Recon, AD in IOM account attributes are updated only but I would like to update the attributes in the IOM user profile too. Please, how can I do?

  Thank you.

  Milan

  You can create a personalized card which is your AD attributes flow into the user profile and add it as a response to the task 'receipt of update of reconciliation. "

  Use the UserManager api to update the user's profile.

• Reconciliation of target

  Hi all
  
  I'm performing reconciliation Trget (OID - IOM) here's the scenario
  
  1. create the user in OID.
  2. run the Traget reconciliation.
  3 link should be established between the xelsysadm and the account of the OID.
  
  How to achieve this?
  
  The action of the rule od the OID resource object I added action ANY MATCH FOUND = ASSIGN to the USER (xelsysadm) .
  
  But I'm not able to see the link. Help me
  
  Thank you.

  For your understanding - typical target scenario Recon

  (1) matching process
  To do this, you must create the mapping between attributes RO and the form fields in the process definition (mapping the field of reconciliation) and define mappings of keys corresponding to take place. You can define multiple keys. In this way the matching process takes place with the resource already provisioned or certain actions occurs when you define your object reconciliation rule.

  (2) corresponding entity
  To do this, you must create a reconciliation rule where map you the RO attributes with the attributes of the entity.

  In your case, you must follow the corresponding entity scenario

• The issue of reconciliation with TFTP-HR and AD.

  We have recently implemented by IOM using a PeopleSoft HR system as reliable source and target AD as one of the systems. When we did the first reconciliation (load) load us data in IOM by using the scheduled task of PSFTHRTrustedUserRecon. This profile of IOM's data correspond to what was in HR. everything is good so far. Then we ran the scheduled task 'AD user target Recon' to load data of the AD in the AD user resource objects. This is where the problem comes. Profile data user of the IOM are good, but the user AD resource object data have many mistakes: incorrect addresses, wrong numbers etc. Is there a way to get the user profile data (close) eliminated IOM for resource AD user objects and so on AD.
  
  Thanks in advance for any help you can provide.

  You can create a scheduled task to perform the updates. After you run the two targets recognition for the resources of the user, follow these steps:

  For each user, enter their profile of IOM values. Find the instance of the user to active directory and using the setProcessFormData, you can update all the values on the form of course AD the user user. Any area that has an associated task 'Updated' will be triggered and update the information Active Directory of the user in the target.

  Piece of cake :)

  -Kevin

• SSH reconciliation issue after application BP4 for OIM11g

  Hi all
  
  I am facing a problem trying to reconcile users between OIM11g and a resource target SSH. In particulare, all worked well before asking the BP4 OIM11g. I have a custom rule of reconciliation that serves as a Mapper betweek custom field of a user called SSH, in which I enter specific target account to reconcile, and the Users.UserLogin of the SSH form field. The rule is expressly defined, via the console design, like "SSH is equal to Users.UserLogin. Now when I run the reconciliation of target user SSH for the specific host, OIM11g creates all the events of reconciliation but does not bind the target accounts IDM users (not related to any user).
  
  Does anyone know how can I fix this problem? Read the newspaper it seems to be without a single error.
  
  Thank you very much.
  
  Kind regards
  Giuseppe.
  
  Published by: Giuseppe on November 14, 2012 14:35

  Hey, Giuseppe.

  There is an open bug related to this issue: Bug 14493217 and note ID 1494023.1

  PLS, go to metalink and check it out.

  I hope this helps.
  Leoncio Thiago.

• Reconciliation of the EBS target does not work for the payments.

  Hi all

  I use OIM 11 g 2 and Oracle EBS user Managment 9.1.0.7.0 connector.
  I want to link the user's responsibilities in EBS your child to IOM. I tried to use the Scheduler ""eBusiness UM target user reconciliation resource ' but the execution of this work is just creating the EBS account for the user at the IOM. " I can see the user's responsibilities in the details information of the EBS account, which was created by the work of reconciliation of target, but I don't see them as the user rights

  How can I achieve this?

  Any help is appreciated.

  Thank you and best regards,

  Thank you for your help. I solved this problem with the use of assignments of rights enforcement after the work MU target resource user reconciliation eBusiness

• The difference between targeted source vs trust reconciliation?

  Hello!
  
  Can someone explain to me in one "for the fate of the mannequins in a way" or "for example" what is the difference between
  Trusted source reconciliation and reconciliation of targeted resources?
  
  I found this explanation on the Oracle, but I still do not understand the difference:
  Reconciliation of targeted resources:
  occurs when the audit criteria make up the demand for resources or change access real insurance of resources put into service or lack thereof in a query ad hoc bases.
  
  Reconciliation of reliable source:
  occurs when the audit criteria is close to a main point of truth, validation of the status of the access of resources against the policy of the company.
  
  Thank you very much

  http://download.Oracle.com/docs/CD/E11223_01/doc.910/e11217/processes.htm#sthref78

  Confidence:

  In this case if no match is found then it will create the user to IOM.
  Suppose that the user with Userid JMD1 is at AD but not with IOM. When we execute AD Trusted Recon, then it will search JMD1 in IOM. If it does not find any user with username JMD1 in IOM then it will create the user to IOM.

  Target:

  It cannot create a user of IOM, but it can make the link between IOM and the AD users.

  You can check this link in the resources of any user profile.

  Assume that JMD1 is in AD, but not with IOM. When we run target Recon for AD. Then he will not find any user with username JMD1 in IOM so he won't do anything. This is called the orphan account.

  Now JMD1 resided at the IOM as well as in the AD. Then it will create a link between IOM and the AD users. Just go to IOM JMD1 resource profile. You can see that ANNOUNCEMENT will be in the State enabled for this user. He manages the account not the identity.

• Error executing target Recon

  Hello guys,.
  I get this exception when I run Recon target on a GTC connector.
  java.lang.NullPointerException
  at oracle.iam.reconciliation.impl.config.Profile.getAccountMatchingRulesWhereClause(Profile.java:467)
  at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.getMatchingRule(ReconOperationsServiceImpl.java:474)
  at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.ignoreEvent(ReconOperationsServiceImpl.java:401)
  at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.ignoreEvent(ReconOperationsServiceImpl.java:346)
  .....
  
  Says dev guide possible cause is missing form process mapping missing or where clause. Since it is a GTC I run the wizard again and put up-to-date mapping key key user IOM field field and land mapping Recon, staged on behalf of IOM. I still see this error when I run the work of Recon target. Is there anything else I should be doing.
  
  Thanks in advance for any help.

  Make sure your recon does not work or your get error when creating recon profile as plugin load question does not affect the recon.
  See this link, I think it helps you to...

  ODSEE issue of reconciliation of the IOM - number of invalid users

• AD locked status reconciliation

  Is it possible to reconcile the account locked AD status?
  
  Thank you

  Hello

  AD locked status may have to IOM help AD trust reconciliation or reconciliation AD target.
  1 AD recon trust-> brings a locked status as long as TimeStamp, here you need a customization to analyse the value "1".
  2. in target Recon-> works very well for the State locked and unlocked (analysis of connector STANDARD here the timestamp value '1' for the locked state).

  Kind regards
  Raghav.

• How are the changes/updates on the attributes target system are reconciled?

  Hello
  
  How are the changes/updates on the attributes target system reconciled within IOM automatically? Suppose if the userpassword in OID is changed via external SSO application by the user. How these changes at the end of the target system can be reconciled in IOM? Annex which task should be scheduled for the same? I understand that we can configure reconciliation the target system. But suppose that happens if a another example; a group of groups are removed from the OID; How these changes will be reconciled within the IOM? It is done in real time?
  
  Response to most early would be really useful.
  
  Thank you
  -oidm.

  The only changes that are made in time real are push systems. For example, Peoplesoft has an Integration Broker that when a change occurs, the events is pushed to the listener that then creates the recon event to IOM. Synchronization of Active Directory password is also a push system where the domain controller has a dll that is triggered when the password is changed to push to the IOM.

  Other targets are reonconciled to an interval defined in your task scheduler. Most of the targets have some form of variable change so that only the entries that are updated in the target are reconned in. Values such as passwords should not be reconciled however because they will be in clear text in the recon Manager and in the database.

  As for your example, it does not really have that IOM criteria. IOM does not manage the OID groups to a group level, it manages the permissions of the user level. So if you continue to run the recon OID group Lookup on an interval of schedueld, it would update the list of choices that is used to define the groups available on the child table. Then when the recon is run agaisnt these OID of the user that have been changed (assuming that a change to a membership in a group is an update to the user, which is not in Active Directory) and then you would get their current list of groups they have right to.

  -Kevin

• Lavbiew 2012 project problems with WinXp SP3 Installer program install - errors

  I have a project that has built and installed Windows Xp and 7 when built with LV2011. I upgraded to LV2012 and I get a Setup installation error build installed on a Windows Xp Service Pack 3. I noticed that LV2011 had WinXp as min requirement and LV2012 now is Win Xp SP2 minimum. But this isn't the issue here, because the target is SP3.

  I found that the version of Labview 2012 Installer went from LV2011. The properties of Labview 2012 Installer has the default settings

  This includes all the components for the Runtime Library 2012 F3. More precisely the core of mathematics and the Non-anglais supports for the runtime library. The two elements give Installer failure and mistakes. See attached for the correct settings file. I have it became the local technical support technician and service appealed to this subject to be submitted to the development team.

• cRIO FTP transfer file size limit

  Hello

  I generated a data file on my cRIO which is about 2.1 GB in size. I can't transfer this file to the cRIO via FTP. I tried windows FTP Explorer, the built in MAX file transfer utility, coreFTP and WinSCP. I am able to transfer other files on the cRIO which are smaller in size.

  Is there a file size of FTP transfer limit? It is around 2 GB? Is that all I can do to get this file out of the camera?

  Thank you!

  OK, I was informed that there is a CAR on this #252919 issue. VxWorks cRIO targets cannot FTP of files greater than 2 GB. The workarounds are to transfer on a USB key or upgrade to LV2013 and use WebDAV.

  https://decibel.NI.com/content/docs/doc-6103

  http://digital.natinst.com/public.nsf/webPreview/4EBE45E8A816B19386257B6C0071D025?OpenDocument

  Thanks to bouazza Whitaker from technical Applications.

• RMAN recovery

  Hi all

  As part of the migration from 32-bit to 64-bit process, I need to take the datafile level backup of the database in different file systems located on the server because of space issues. In the target server also, I need to keep the backup sets for different file for rman restore and recovery systems.

  Can someone give me the steps for this or any document?

  Database version: 10.2.0.3
  Source OS: Linux 32 bit

  Target OS: Linux 64-bit

  If you have a complicated structure, you can use the VALUE of NEWNAME to specify a new name for each data file.

  The BackupSets may be in a different location.  You can use CATALOGUE START WITH to update the controlfile with information on the new location.

  Hemant K Collette

• Notification of OIM(11gR2) after the update of mail electronics id

  Hello

  I need to implement a use case in the IOM as follows.

  IOM has a target of integrated resources - Say Resource1. When the email identification function is updated in IOM it will get spread to the Resourc1 and and if the email is updated to Resource1, it will get reconciled with IOM. And we have another system that was not integrated with IOM say Resource2. Our requirement is to send an e-mail notification to privΘ Resource2 when ever users e-mail update event occurs to the IOM. What was the best way to implement this usecase. As far as I understood that this could be implemented using event handlers. I have here any other approach/design to address this usecase.

  I mean using the console design approach.

  Satyendra-

  The " ", "send a Notification to the task of Admin resources" should get called on the success of the 'receipt of update of reconciliation' task. "

  Adapter of the process task (send a Notification to the task of Admin resources), you can read the value of the former emai E-mail/news(using old box, just give a try) or you can compare the user E-mail profile & form Email Id of process (within your code) and trigger the update the user's profile.

  The post below also had same type of requirement:

  Re: How to upgrade the IOM user profile fields after reconciliation of target user AD

  Or to avoid any confusion, just use the cleaner the handler approach to notification of the trigger.

  ~ J

• GoldenGate DDL and sequences of support privileges

  Hi, I would like to know if there is a set of minimum privileges necessary for the use of the GoldenGate DDL and sequences support the feature.
  On the installation guide for GoldenGate, they give the role dba.
  
  But it's a role with many privileges, I need help to find out what privileges are that this user really requieres.
  
  Thank you.

  Hello

  Grant below privs,

  CREATE SESSION, ALTER SESSION, RESOURCE, CONNECT, SELECT ANY DICTIONARY, FLASHBACK ANY TABLE, SELECT ANY TABLE

  DML

  INSERT, UPDATE, DELETE ON

  DDL

  CREATE TABLE, ALTER TABLE, DROP TABLE, TRUNCATE TABLE, ALTER TRIGGER, CHANGE the CONSTRAINTS... you must grant privileges to issue DDL operations for
  target tables, such as create, alter, drop, truncate, renaming... etc... What are the operations DDL that you want to replicate the same operating privileges must be granted.

  Grant EXECUTE on DBMS_FLASHBACK, running also on utl_file

  For the sequence DDL replication, you must run the script sequence.sql on both the database and grant the privileges below

  Source:

  EXECUTE on updateSequence

  On the target

  EXECUTE on replicateSequence

  Don't forget to run the sequence of Flush GGSCI command after starting the process.

  I hope this will help you.