Issue of ultra endurance with some settings Mode

Similar Questions

• Premiere Pro 7.0 - problems with some mp3 files

  Well, I'm back with a new question. Because I need sound effects for my film, I use sounddogs.com and I get sound effects as MP3 files. First can manage very well, but from time to time I'll get a file first refuses to play, and instead of it gives me no sound at all. Other files in this site work very well, so I have no idea what could be the problem. Any ideas? You guys saved my movie before, I have no doubt that you can do it again. Thanks for any help.

  MP3 files are often problematic. I always convert everything except the tiny SFX (like yours) to 48 KHz 16-bit PCM/WAV to Audition. The great little free-audio editor, Audacity, it will also. Just drag the file in Audacity (or open) and Save_As. fact!

  Most of the issues seems to be with some of the "tricks" that can be in an MP3 player, such as the art of the album.

  Now I have also some SoundDogs SFX, but have never had a problem with one of the time. However, the conversion is almost instantaneous and worked 100% for me.

  Good luck

  Hunt

  PS - Note that conversion to WAV format do NOT recover the fidelity lost with MP3 compression.

• Switch Cisco 2960/3560 = > recovery password and default settings with the button Mode

  Hi Experts,

  I have some confusion with the button Mode with cisco 2960/3560 switches.

  I read on many forums and articles, but where things are not clear.

  a place given 3 seconds and somewhere is given 7 or 10 seconds.

  Qus1), what is the exact time to press/hold Mode button to perform two following tasks:

  A. password recovery (according to my knowledge 3 sec) good or bad?

  Configuration of the switch (start + run) would be safe

  After the recovery of password? Yes or no

  B. factory default (according to my knowledge 10 dry) good or bad?

  I'm afraid, because if I press mode button more than 3 seconds, then

  It will delete any configuration of cisco switch. Yes or no

  Qus2) I want to recover the catalyst 2960/3560 switch password without

  Start/run configuration to lose. That is my main concern.

  Please tell me how to do this, what will be the time keeping Mode buttom

  in a few seconds?

  Qus3) which means this line

  "If the password recovery mechanism is disabled in switch

  then you will lose all the config.

  This sentence has been given on this forum url

  https://supportforums.Cisco.com/thread/140848

  KS

  Attach a terminal or PC with terminal emulation (for example, Hyper Terminal) port console switch.

  Use the following terminal settings:

  • Bits per second (baud): 9600

  • Data bits: 8

  • Parity: None

  • Stop bits: 1

  • Flow control: Xon/Xoff

  Note: For more information on the wiring and connection of a terminal to the console port, refer to connecting a Terminal to the Console Port of Catalyst switches.

  Unplug the power cable.

  The power switch and take it to the switch: command prompt:

  2900XL, 3500XL, 2940, 2950, 2960, 2970, 3550, 3560, and 3750 switches of the series, to do this:

  Press and hold the mode button located on the left side of the façade, while you reconnect the power cable from the switch.

  2960, 2970

  Release the Mode button when the SYSTEM LED flashes orange and then turns green. When you release the Mode button, the SYSTEM LED flashes green.

  3560, 3750

  Release the Mode button after about 15 seconds when the SYSTEM LED turns green. When you release the Mode button, the SYSTEM LED flashes green.

  The system was interrupted before the flash at the end file system initialization

  loading the operating system software:

  flash_init

  load_helper

  boot

  switch:

  Run the flash_init command.

  switch: flash_init Initializing Flash... flashfs[0]: 143 files, 4 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 3612672 flashfs[0]: Bytes used: 2729472 flashfs[0]: Bytes available: 883200 flashfs[0]: flashfs fsck took 86 seconds ....done Initializing Flash. Boot Sector Filesystem (bs:) installed, fsid: 3 Parameter Block Filesystem (pb:) installed, fsid: 4 switch: !--- This output is from a 2900XL switch. Output from !--- other switches will vary slightly.

  Run the load_helper command.

  switch: load_helper switch:

  Question the dir flash: command.

  Note: Be sure to type a colon ":" after the dir flash.

  Appears in the file system of the switch:

  switch: dir flash: Directory of flash:/ 2    -rwx  1803357                  c3500xl-c3h2s-mz.120-5.WC7.bin !--- This is the current version of software. 4    -rwx  1131                     config.text !--- This is the configuration file. 5    -rwx  109                      info 6    -rwx  389                      env_vars 7    drwx  640                      html 18   -rwx  109                      info.ver 403968 bytes available (3208704 bytes used) switch: !--- This output is from a 3500XL switch. Output from !--- other switches will vary slightly.

  Type rename flash: flash: config.old config.text to rename the configuration file.

  switch: rename flash:config.text flash:config.old switch: !--- The config.text file contains the password !--- definition.

  Issue the boot command to boot the system.

  switch: boot Loading "flash:c3500xl-c3h2s-mz.120-5.WC7.bin"...############################### ################################################################################ ###################################################################### File "flash:c3500xl-c3h2s-mz.120-5.WC7.bin" uncompressed and installed, entry po int: 0x3000 executing... !--- Output suppressed. !--- This output is from a 3500XL switch. Output from other switches !--- will vary slightly.

  Enter "n" at the prompt to abort the initial configuration dialog box.

  --- System Configuration Dialog --- At any point you may enter a question mark '?' for help. Use ctrl-c to abort configuration dialog at any prompt. Default settings are in square brackets '[]'. Continue with configuration dialog? [yes/no]: n !--- Type "n" for no. Press RETURN to get started. !--- Press Return or Enter. Switch> !--- The Switch> prompt is displayed.

  At the switch prompt, type en to enter a mode.

  Switch>en Switch#

  Password recovery

  Type rename flash: config.old flash: config.text to rename the configuration file with its original name.

  Switch#rename flash:config.old flash:config.text Destination filename [config.text] !--- Press Return or Enter. Switch#

  Copy the configuration file in the memory.

  Switch#copy flash:config.text system:running-config Destination filename [running-config]? !--- Press Return or Enter. 1131 bytes copied in 0.760 secs Sw1#

  The configuration file is now reloaded.

  Replace the current passwords that you do not know. Choose a password with at least one capital letter, one number and one special character.

  Note: Replace passwords that are required. You must crush not all passwords listed.

  Sw1# conf t !--- To overwrite existing secret password Sw1(config)#enable secret !--- To overwrite existing enable password Sw1(config)#enable password !--- To overwrite existing vty password Sw1(config)#line vty 0 15 Sw1(config-line)#password Sw1(config-line)#login !--- To overwrite existing console password Sw1(config-line)#line con 0 Sw1(config-line)#password 

  Write the running configuration in the configuration file with the write memory command.

  Sw1#write memory Building configuration... [OK] Sw1#

  For factory reset:

  do not give under the control of factory reset

  Switch#copy flash:config.text system:running-config

  can I copy the running configuration to Flash

  Switch flash running-config #copy:

  Destination file name [running-config]?

  Building configuration...

  [OK]

  Switch #copy running-config startup-config

  Name of destination file [startup-config]?

  Building configuration...

  [OK]

  Review the link for more information below

  http://www.Cisco.com/en/us/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml

  Please note the useful messages.

  Concerning
  Vesta
  "Everybody is genius." But if you judge a fish by its ability to climb on a tree, he will live his entire life, believing that this is stupid. "

• Problems with Windows Update! ("some settings are managed by your system administrator"?)

  I seem to have problems with my windows update. Last week when I checked to see if updates were needed that I was unable to view them because he said that "some settings are managed by your system administrator" who won't let me change the settings and the display of updates. It's my own personal computer so I am the administrator. However, this week update windows begins to function normally because there was an update available and I managed to download it, but a few days later, the windows on the screen update returned to say that "some settings are managed by your system administrator. I did a scan for spyware/adware/virus recently and I had only a low risk of adware that was detected and deleted without modification with windows update. This problem started right after that I got a warranty of software installed by Dell, I don't know if what they did could cause the problem. The system I use is Windows Vista Home Premium Service Pack 2. Any help would be greatly appreciated!

  You can see the effects of a hijackware infection. That being said...

  McAfee applications (and Norton) are known for not not upgrade (or uninstalling) itself.

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. After completing step 3 of triple correction, manually & repeatedly update your McAfee application until you get a prompt 'no more updates'.

  3. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  4. restart & test by...

  How will I know if my computer is up to date? :
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Crash mode SMS application ultra endurance

  Hello
  I have problem with app sms mode ultra endurance after lolipop upgrade. I close itself each time I send the message to someone.

  Sorry to hear that you have problems with the e-mail application.

  We found the cause of the problem with the ENDURANCE Ultra messaging application and it will be fixed in the next version of the software expected to be released before the end of this quarter.

• Where is the support for the iPhone with some of these issues?  It's amazing that none of the iphone Tech responded to the unanswered questions.

  Where is the support for the iPhone with some of these issues?  It's amazing that none of the iphone Tech responded to the unanswered questions.

  This is a user forum. You to read the terms of use to which you agreed to when registering, you would have been aware that the participation of Apple here is minimal.

• How can I fix the speakers on my Asus laptop? I played with the settings and accidentally deleted some functions.

  original title: speakers on windows 7

  How to fix speakers on my Asus laptop. I played with the settings and accidentally deleted some features and I can't restore it to its original.

  Can you help me with this problem?

  Thank you in advance.

  The best

  YinNooy

  Use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.

  I hope this helps.  Good luck.

• Bug Mode Ultra endurance

  I was in mode ultra endurance and it disabled as usual, but he's stuck somewhere between ultra endurance mode and normal mode...

  now my phone just keeps restarting...

  What should I do?

  Press and hold the power & volume 10 seconds > connect your phone to a wall charger > let it charge for 1 hour > on your computer, run CCP > repair/update > do NOT turn on your phone > do the following, and then try again.

• App crash in Ultra endurance Mod message

  Each accident app in Ultra endurance model use this feature in the night. But I can't send a message or whatever it is when it is open.

  HOOOOOOOOOOOOOOOOOORAAAAAAAAAAAAAA

  I find the problem!

  

  When I reset my phone to factory mode, I tested the endurance Ultra mode and I have not seen this problem... So I figured that one of the apps to cause this problem, I uninstalled apps and updates one by one, then I have ENDURANCE Ultra activted mode after each step (Yes, I know, it's the)

• There are a few problems with some of my tiles (Mail, games, music, etc.).

  Original title: Windows Mail (tile)

  Hello everyone.

  I had a few problems with some of my tiles (Mail, games, music, etc.) so I have WSReset.exe and since then I could not find one of these tiles. I searched the Store and tried to re - install, but it says that I must admit. I don't know what to do. Please help me...
  Thank you...

  Hi rap.

  Thanks for the reply with the status of the issue.

  Here in this scenario, you need to refresh your computer after the backup of your data. Refresh your PC reinstall Windows and keep your personal files and settings. It also keeps the applications provided with your PC and applications that you have installed in the Windows store.

  How to refresh, reset or restore your PC:

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  Note: refer to the section "refresh your PC without affecting your files.

  Warning: Apps that you have installed Web sites and DVD is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  If you do not have installation media, you can see the following article from Microsoft Help to create installation media.

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Note: The steps also apply to Windows 8.

  Please reply with the status of the issue, so that we can confirm that the issue is resolved.

• How to work the DNG? is it always the original image with the settings of self-development?

  Hello!

  A question about DNG. recently, I had to put a bunch of my RAWs to print elsewhere. I copied all the RAWs and XMP files. Then imported on a different PC/LR. Others do not, some reflect my edit-adjustments. RAWS all VINTAGE.

  I save now on some DNG of my final print changes.

  I'm thinking a DNG in PDF format.

  When I export a DNG a RAW processed, is it cooked in? or is it always the original image with the settings of self-development?

  Thank you

  Alex

  Lightroom is a non-destructive Editor. So, you can take any file type (JPG, DNG, RAW, TIF, other) and edit this photo, and always come back to the unedited version.

  If you export your RAW as DNG or export your RAW as the 'Original', you can also revert to the unedited export version (but not if you export as JPG or TIF).

  With regard to your initial statement that you have 'copied the RAWs to print elsewhere', they may not had the changes written to XMP. It would also be a problem with the DNG format, as I said, you should enable the option to write changes into XMP or issue a command, because by default, Lightroom writes not changes to your DNG or sidecar xmp for the RAWs files.

  The copy is different from export.

• Windows installed the automatic windows update agent and I would appreciate help with the settings option in this newly installed agent update so no update never install or download unless I choose to do.

  Hello.

  I have windows vista 32 bit home edition.

  Today somehow automatically installed windows ' automatic update agent 747600226

  I always keep my settings to check the updates but let me choose whether to update or install.

  With this new "update automatic agent" which automatically installed on my system, I want to make sure I have place it properly so that it remains in the same way that I always have my settings but two settings (options), he checked, and are confusing for me to know what those checked settings will do.

  I would like to help you with these settings to make sure that the update is still as I want.

  Below chose correctly when the new program installed today.  That's how I still want the settings to be:

  Look for updates but let me choose whether to update or install

  Please let me know if I need to change all the options account required in addition to this update agent to ensure that only, I choose to update or install.

  There are four options and a box is in two and I don't know if I should remove the check marks or not.

  Here are the other four options that I need to know how to configure it so that only I have update/install.

  Once again, the download automatic microsoft today (update automatic agent 7.4.7600.226) without asking for my incentive preset automatic update options and that's what I'm trying to make sure is set correctly so that nothing installs or updates without asking me or let me do.

  Option 1: (this option is checked. If I leave it checked will be it install or warn me only?)

  Give me updates recommended in the way I receive important updates.

  Option 2: (this is not checked and am not worried about this one)

  Allow all users to use installed on this pc.
  
  Option 3: (this is checked and want to know if should uncheck; what I don't want is any what to auto install, but the wording of this option and option 1 are vague because of the "give me " so I don't know what it means or will do.)  If this box is left to it automatically update/install?)

  Give me updates for Microsoft products and looking for new optional microsoft software when I update windows

  Option #4 (this is not checked, and I am not concerned about this).
  
  See the notification me detailed when new microsoft software is available.

  Thank you very much for your help.

  Take care! :)

  Hello

  The Windows Update automatically updates the updater (himself), regardless of your settings.

  1. Yes it will alert you so you can update or install.

  2. check if you need more of yourself (other users) to be able to select and install the updates.

  3. it will let you know when they become available.

  4. just gives the news of additional details about some of the updates.

  Looks like you're ready for anything you like.

  Rob - bicycle - Mark Twain said it is good.

• XP - issue of modem - works with Westell 327W - now will not work with any other modem

  I use Westell 327W modem.  Verizon contacted on slow speed of ISP.  His person accessible tech my computer remotely and made various changes to the settings.  Did not help with the speed.  They then sent new modem - 7500 Westell.  However, I find now that while the computer always connects OK with the Westell 327W original, I can not connect with any other modem, including a new and several others that I have which was very well connected in the past.  I guess that the person tech made some changes to some settings that I place that affect the ability of the computer to recognize and to connect through a different modem.  The modem starts fine, all lights come on, but when I go to connect, I get a response that the remote modem does not recognize me.  Which parameter is one that handles it.  Thank you. Peggy

  Thanks - I have discovered that while I had an internet connection (that I could see), Verizon was not recognize me.  Problem is that I had to reinstall the software from Verizon for the new modem, which they had not told me I had to do (and did not).  Finally stumbled on it and had it solved, but thanks to the entry.

  By-the-way, he did not a thing to address the problem of low speed; their representative says it is 1.7 mps to the modem, the best that I get so 1.25, and it is habituellement.8 to 1.0.  Probably not your area of expertise

  Once again, thank you.

• For your security, some settings are controlled by group policy

  I want to install Security Essentials.
  I am running XP HOME Edition Service Pack 3 on 2 computers on a network at home for almost a year. I have One Care. When I start the computer their direct initialization on the desktop.
  I know that I don't have the Group Editor and there is no way to get installed it on XP HOME.
  For the last 2 weeks, when I click on Windows Firewall in Control Panel, on two computers, the settings window appears but there a warning on top "for your security, some settings are controlled by group policy" and the selections are grayed out, and the firewall is disabled.
  I have no firewall problem turn on or turn it off in One Care on computers. I've deleted and reinstalled One Care, and even when One Care is removed on both computers I get the same results with Windows Firewall.
  I even replaced the firewall router had to this router.
  Nothing not done, I ran Rgeg priest and anti-Malware.
  I got a response saying to run "mmc", but nothing happens.
  I even spent 5 hours on 2 days with a care that told Finally I must contact support XP and I have had no reports of them support.
  I tried http://windowsxp.mvps.org/resetfwpol.htmon both computers, the Windows Firewall Branch returns to regedit after a reboot and Windows Firewall is still gray.
  I would like to delete One Care and install Security Essentials, but I fear that I can find with no firewall.
  Help, please!

  Mike,
  Me again!
  I removed One Care on both computers, rebooted, installed MSE, rebooted, did a quick auto scan, showed no problems. The Windows Firewall still has the statement "For your security, some settings are controlled by group policy", but the good news is the firewall is on and I can't turn it works!

  Now I can run chkdsk on both computers.

  The Linksys router has SPI Firewall. Should I so on only the SPI Firewall Windows Firewall?

  Furthermore, I run RegClean once a week. Do I need to continue to operate that?

  Don

• Try to activate Vista's problem reports, but get the message "Windows incident reports are disabled." and some settings are managed by your system administrator

  Original title: trying to activate the Vist problem reports, but get message "Windows problem reports are disabled."

  "Windows problem report is disabled." I can't activate the problem reports and Solutions on my Windows Vista computer.  When I click on "Change settings", I would be prompted with the following message if poster "some settings are managed by your system administrator."  It's personal PC at home.  I don't know how to activate it.  I already went to political group & register to adjust some settings.  But still unable to activate this.

  All settings are disabled as this.

  This problem only recently.

  Method 1

  System Restore does not work.

  Method 2

  Disable the antivirus software does not work.

  But after some research, I realized that the problem could be due to a recent installation of a PC anti-frustration software called Soluto (the star was "Activate Crash Handler Soluto").  It worked after that.  After uninstalling, I rebooted the PC system.  After the reboot, I checked the reports on the problems and Solutions and found I could now adjust advanced settings.  I have also reinstalled the software, Soluto and ensured that this time, "activate Crash Handler Soluto" not was not checked (i.e. enabled).