Issue Preview with shorts, RAM Clip base...

Similar Questions

• RAM Preview with Audio

  How to get a preview of the video with sound (when I press 0), more than 30 sec long? If it is possible at all the... It wtites I don't have not enough resources for the RAM to listen to... seconds audio, even when I select a range on 2-3 minutes...

  If you need more time with your ram previews adjust the Zoom Ratio factor or to 25% magnification and resolution on Auto or set a resolution of 1/4. If that always gets you not what you want to set ignore frames at 1 or 2 in the Preview Panel. It is the only way to measure in the preview.

  If you use AE to edit you do not work effectively. AE is for the creation of pictures and short clips. A project of more than a few seconds may be better served by break up in scenes or short sequences, to make the pieces, then editing and polishing in Premiere Pro or your NLE of choice. I even cut animations of dynamic text (often improperly called lyric video) upward in one or two phrases or sentences, then do the final cut in first. It helps me to do in about half the time.

• Short RAM Preview in After Effects

  Hello

  After applying a few automation & effects of imported video (1920 x 1080, 29.97 FPS, 50 Mbps, H.264), RAM Preview work VERY slowly. First, the program starts to deal with the composition of the current time indicator position, image after image, spend about 2 to 4 seconds per single image. Then, after about 2-3 seconds of the composition (60-90 frames or almost) computer, the application actually starts preview this short section of the model. Despite the settings in the preferences of After Effects (size of the Disk Cache, 6 GB of RAM available to the application, the rendering of multiple images simultaneously etc.), the length of the RAM-Preview video VERY short rest - maybe 2 or 4 seconds at its best. Also, sometimes, the window, saying that "after effects error: Preview RAM 2 or more images to the reading needs.

  What goes wrong and it is possible to increase the length of the composition for the RAM Preview section and speed up processing executives before RAM Preview could take place?

  Thank you very much.

  You do not have enough RAM to show more than that. Video uncompressed HD (that is what After Effects creates in his compositions) is very large. More info here: FAQ: why preview RAM only plays in my composition?

• Help! First reading timeline runaway Pro with multicam and clips from Cineform Neo

  Hello

  I encountered a problem with a 'runaway' in first Pro CS5.5 timeline - not always, but often enough. Once playback begins, nothing less than restarting the computer can stop it.  I don't know if this is a bug that needs fixing or something else.  I'm a recent Mac / FCP7 switcher to a range of Adobe products.

  My machine is a chip of quad core i7 Sandy Bridge on Windows 7 with 16 GB of RAM.  I do not have an Nvidia card in the system.  I'm under Premiere Pro 5.5 using a timeline multicam with Cineform Neo clips in 1080 p (four angles of the camera).  The initial "live edit" of the multicam went well, and I'm now trying to go back and refine the exact changes.  Play movie multicam to check program changes resulted in three 'lock up' where nothing will stop playback (audio and video), not the space bar, mouse, ESC, nothing.  The mouse moves always normally, but none of the buttons in Premiere Pro 'click '.  Interestingly, I can open other programs, and the hit restart the computer, but the chronology continues to play.  All clips are converted to Cineform Neo to 1080 p.  The computer shows 56% used CPU and about 45% of the RAM.

  I do not have which would apply other info - no other applications are open when this happens and none was open before this (boot clean with first being the first and the only program to operate).

  If anyone has any suggestions on how to correct or avoid this problem, I would be very grateful.

  Thank you in advance,

  Videoguy 16 x 9
  

  I'm still getting used to from Windows, Macs and Final Cut Pro (may he rest in peace).  I guess that I expect that some sort of notification when updates were available.

  The long story short, I used version 5.5.0 first and set to update to the latest version at the suggestion of Jake Seagraves above to Cineform - and I have not had the problem again.  If you have not had the opportunity to work with the guys from Cineform, they are great to work with and very responsive.  And in my humble opinion, Cineform is one of the best codecs for first mastering.

  In all cases, you can mark it as resolved.  I'll just have to remember to manually search for updates once in a while.

  Thank you all!

• chip Z50-70 problem reboot / restart issue and 8 GB ram

  Salvation;
  I have lenovo z50-70 notebook with Intel i7, 8GH RAM and 250 GB of kingston SSD
  The bios of the laptop is v.29
  I installed win 7 PRO 64-bit operating system.
  The system has worked well for about 2 weeks. After this time I noticed the strange question - the laptop is unable to boot from the disk hard when restarting/rebooting the system is used. It breaks down screen goes black and then the cell phone tries to do something (Lenovo logo at all), goes down and repeat for infinity.
  When the pxe boot is enabled the system constantly trying to boot from pxe. anoint and once again.
  I can only close the laptop to the power button and restart. It seems that the system does not recognize the hard drive during the reboot process.
  When I stopped the system (down) and leaves - everything works fine and the system starts normally without any problems.
  I also noticed one other issue - the laptop does not recognize the 8 GB of ram chip. (kingston 8GB PC3 - 12800 CL11 204 pins SODIM). It is little matter if I use this RAM, alone or with other RAM - laptop chips recognize only 4 GB or 2 x 4 GB. I tested the RAM 8GH in other laptop (dell and benq) and it works fine, only Suur z50-70 a problem with it.
  I don't know if the ram and restart problems are related to each other, but both of them seems to have problems hardware or bios.

  Any help will be appreciated

  Hello
  I solved the problem by upgrading the SSD firmware.
  I used the tool of kingston for upgrade (for ssd SV300S3 series):
  http://www.Kingston.com/us/support/technical/downloads?product=SV300S3&filename=V300_525fw_Win

  The upgrade process takes a few seconds and after that, everything works fine. I've done a few reboots and I can't reproduce the problem.

• How to add new properties and index 11.1 CRS with short?

  Hello Experts,

  I installed oracle trade crs 11.1 with short and able to search the content (default) in the site.

  I want to add the new property to be searched on the site. Here are the steps I followed.

  1. added the new property in atg/commerce/endeca/index/product-sku-output-config.xml.

  2 adding data to this property for some products to research.

  3. run the "partialIndex" to the component/atg/commerce/short/index/ProductCatalogSimpleIndexingAdmin /.

  After execution of 'Partial Index', I am able to see these new properties of the data in the location by going to http://localhost:8006/endeca_jspref/controller.jsp.

  But I'm not able to find that content in the store.

  Am I missing something? Please let me know what are the steps to follow.

  Kind regards

  Ravine

  Hello

  Take a look at APP_NAME.recsearch_indexes.xml and APP_NAME.recsearch_config.xml, ENDECA_APP/config/mdex folder.

  Put your assets to these files and try to run a comprehensive Index of the base line.

  It will be useful.

  Good bye.

• How to create a new catalog to ATG and integration with short?

  I created the new catalog in BCC. I have deployed in production. How to integrate this new catalogue with short and do reflect in the site. Can someone see a few directions / according to the process for this context.

  Problem is solved by running base-update from the command prompt to the side short. Catalog is now coming. Thank you

• Cuda not refreshing preview with a quadro... WHA?

  Well, I have a weird problem with Premiere Pro 2014.

  I'm editing on a completely new fairly decent Windows system: 8.1 Win pro 64-bit, 32 GB Ram, SSD and records all external references on the stroke of lightning 2 with a quadro graphics card running 2200.

  I am currently editing the images of Dragon k 6-1/16 preview with all plugins turned off (a lot of time remapping, however).

  Problem I have is that when running with cuda when I turn on the securities or (i.e. to watch the trail under the top) or even the simplest plug-ins or motion Panel (position or opacity) to change the preview window is not kept up-to-date until I move the cursor in the editing window.

  This makes editing infuriatingly slow, any thoughts would be very welcome.

  Tried clearing the cache, OpenCL is so incredibly slow and read by software while it works just kills me with the offset. Currently in RED movie editing mode.

  This could be a problem with the video preview format?  Other options on the PC that I have-Frame Mpeg (to 2.4:1 i.e. 1920 x 800)?

  Thank you

  Exactly what version of CC2014? From the output of 2014.2, today there was 4 versions.

• Problem with preview (with Audio)

  

  first of all, Hi guys im jopps, just got started doing my first project in after affects and ive stumbled upon a problem, as shown in this screenshot I can't find my movie make in preview ram in its entirety will stop at this same point each time, but in normal preview with sound fine. It worked until I started trying to make the next part of the film wheather not safe I changed something, but I don't think I did. has anyone else had this problem?

  First of all, what do you mean by "normal Preview"? For me (and AE users I know) Preview, RAM IS the normal preview. If you mean that the space bar, I never use it and I don't know anyone who does.

  FAQ: Why preview RAM only play in my composition?

  FAQ: How to play or listen to his (audio)?

  In fact, all the FAQ may be useful for you.

  Since you are a beginner in AE, I suggest you Start here.

  If you want something a little more in depth, for only the price of a new video game there is this wonderful resource.

• I want to stop with the 'TEST' user base

  Hi all
  
  I use Oracle 11.1.0.6 / Windows XP.
  I want to stop with the 'TEST' user base, that I created in the database.
  What role/privileges, I need to assign to the user 'TEST' for the stop of the database with this user.
  
  Thanks in advance.
  Anil

  Hello..

  Satish has already provived the link to the oracle documentation. Go trough it.

  The same doc: -.

  >
  When you connect with SYSDBA or SYSOPER privileges, connect you with a default schema, not with the schema that is generally associated with your username. This scheme is SYSDBA SYS; for SYSOPER schema is PUBLIC.
  Connection with administrator privileges: example

  This example shows that a user is assigned a different schema (SYS) when connecting with the SYSDBA system privilege. Assume that the sample oe user has been granted the SYSDBA system privilege and issued the following instructions:

  CONNECT oe/oe
  CREATE TABLE admin_test (name VARCHAR2 (20));

  Later, oe user makes these statements:

  CONNECT AS SYSDBA oe/oe
  SELECT * from admin_test;

  OE user now receives the following error message:

  ORA-00942: table or view does not exist

  After having connected SYSDBA, oe user references the SYS schema, but the table has been created in the oe schema

  >

  Anand

• I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 10:08 minutes or so.

  I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?

  

  In addition, the Console has opened with the same message several times, but I don't know what that means.

  Any help would be appreciated.

  Hello

  The last is a picture of the Terminal window.

  Just because it lists 'Console' does not mean that it has nothing to do with this application.

  You have not said why or what you're trying to install so I can't help with that.

  You can use the activity monitor to leave their.

  After you select an item, use the X in a type of stop sign icon and confirm force quit.

  

  21:36 Thursday; September 15, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• Satellite Pro A200 - cannot start with new RAM

  I have two of these laptops, both purchased at the same time.
  I upgraded to 320 GB hard drive and tried to move the RAM to 4 GB as the spec States can be made.

  I used the recommended type of RAM, but the computer does not start with two RAM modules inserted. If I remove one of them, the laptop boots! I thought that I update the BIOS but found the only version available on the download web site is the same as I.

  Does anyone have an idea what could be wrong?

  What RAM you bought? I think that the modules are not compatible or your chipset does not support the 4 GB.
  Check it with CPU - Z!

  You could test the RAM with Memtest86 ([www.memtest86.com]).

  I doubt that a BIOS update will solve the problem. A more recent BIOS does not change the decision-making ability and/or supported RAM.

• P645-MG how to remove the battery? I push with a paper clip in the hole of the icon on the back, but no reaction

  TravelMate P645-MG how to remove the main battery? Nothing happens when I push with a paper clip in the hole of the battery icon at the back of the computer. A video UTube said that a cover opens, but I can't find where there is a cover of the battery compartment.

  Hello

  Your laptop is equipped with an internal battery. You need to remove some modules and the bottom of the laptop to have access to it. The pinhole is only to reset the battery.

• Problems of sound quality with my Sansa Clip and Rhapsody subscription titles

  I'm at my wits end here. This last Christmas, I bought a black 4 GB Sansa Clip for me. About two weeks after I bought it, I got a low-memory error to create a database. I've reformatted the drive, transferred songs and everything worked fine... for a week. Then I got the same error message that he died completely. As in it would not turn on at all, even connected to my PC.

  I brought instead buy one leave and received a replacement. Now it will not play long pieces of subscription Rhapsody without a slight distortion starting about 13-14 minutes in and continuing to the end of the track.

  I did not have this problem with the first Clip.

  I don't have this problem with securities that I torn and transferred.

  I don't have this problem with my c250.

  I have this problem with my 4 GB Clip son cash. However in addition to the simple to burst I get with my Clip, the music also sounds distorted, with large legs on her.

  I already have the routine of songs and dances for Rhapsody. I have also updated the firmware of these two Clips Sansa to v02.01.32a, tried to transfer using two different USB cables and several USB ports on my computer. The only thing I have not done is reformat the thing. After having to transfer 600 + tracks 3 times in two months, I am rather hesitant in doing so.

  Anyone, please, help me solve this problem?

  Ah, we'll add some gloss of your clusters.

  The your Clip file allocation table a wee 4 KB clusters.  Since you have a 4 GB device, this FAT is big enough.

  Decoding of the Rhapsody tracks requires some supercomputers, being secure to 160 Kbps wma files.  The Clip is responsible for finding the next block of data, but it must focus on this huge FAT.

  The solution is simple!

  Turn on your trusty Clip.  Go to settings > Format > Yes.  This reformatted the device with 32 KB clusters, optimized for the Sansa.

  Please note that this will delete all existing music to your Sansa, and you will need to reload.

  On the other side of the coin, you will hear now own sounding music!

  If you format from Windows, it has the bad habit of formatting with teeny 4 KB clusters - and stuttering that results will make you crazy.  If you format Windows, ALWAYS follow-up with a format on the device via the parameters.

  Bob