Problems of sound quality with my Sansa Clip and Rhapsody subscription titles

Similar Questions

• The weird sound quality with backlight Fuze and mp3 VBR

  Hello world

  I got my Sansa Fuze (firmware 01.01.11F) 2 weeks and I have noticed a weird problem:

  When I'm playing some VBR mp3 files, the duration is not displayed correctly. Files of start playing very well, but when the backlight of the screen gets off (settings I tried different time, show all the same problem), the sound quality deteriorates strongly. These are mp3 files that I ripped directly from audio CD, samples are available on request.

  Has anyone else had this problem?

  Kind regards

  Soenke

  The question is under development.  Lower rate VBR can trigger the processor at a slower pace, the origin of the problem.  If the backlight is on, there is more work for her, and the rate increases.  The noise disappears.

  The decline in the rate increases the battery time.  This problem will be resolved in a future firmware version.

  Bob

• I found the solution for the problem of sound-acpi with Satellite P100-219

  Hello

  I found the solution for the problem of sound-acpi with Toshiba P100 (it works with P100-219 at least). I can provide the source modified and compiled table DSDT, but I would like to know if it is possible to get these changes in the next update of the BIOS?

  See you soon,.
  MIK

  Hi Mik

  As you know that it is not possible to find info on the next BIOS, especially if you want to have some information about the Linux operating system. Just wait and see if some forum users pointed out something on the subject.

• Sansa Clip + Player ignores the titles with sound of frying after the last firmware update

  Hello

  My Sansa Clip + tracks audio playback stopped (same mp3 files it used to always play) after I updated to firmware 1.02.18A.

  The player jumps just all tracks with sound of frying one after the other.  No longer play.

  What's wrong??

  Is it possible to fix it?

  Is it possible to revert to the original firmware version 1.02.15 that worked well?

  Well,.

  I don't know what the problem actually was, but certainly it's associated BONE.
  I'm at home in my Windows 7 and everything works perfectly now.

  The problem I experienced was at work, where I have Windows XP SP3 OS.

  On Windows 7 home, I copy the MP3 files in MSC mode and don't play them no problem at all.

  Driver to work on Windows XP may be defective or unsuitable for copy files correctly on the drive using the MSC mode.

  I do not know. At least, everything works fine now.

  P.S. The funniest is that tech support lady told me that my drive is ruined and it is absolutely impossible to fix.

  She also said that it is impossible to install the previous version of firmware absolutelly and that it not there no previous version of the firmware available more she also said that the only way to "solve" the problem is for me to buy a new player

  Everything just great!

  Every1 thanks for your help.

• I'm having a problem strange sync my 4 GB Sansa Clip + with Winamp

  Sansa Clip + 4 GB

  MTP mode

  MicroSDHC 32GB

  Windows 7 64 - bit Winamp (no additional plugins)

  I recently bought a new 4 GB Sansa Clip + with a 32 GB MicroSD card. Using Winamp, I synced my library on the SD card. Everything went as not expected, no problems to report, I could play all the songs perfectly.

  But now, whenever I try to sync the SD card in the player, Winamp does not appear to recognize the files he had previously synced. A window tells me that there are X number of songs on the Sansa Clip + who are not in the library and encourage me to remove them, let them, or cancel. (photo of the box below)

  

  Basically, Winamp tells me again and again to remove and re - sync a load of songs that are already on the player, which is extremely long and tedious, when all I want is to synchronize an album or two. This happens even if I plug the appliance, let it cool off, and then plug it back to synchronize again.

  If anyone has had this same problem and would be willing to share the solution, me a huge favor. Thank you.

  Nevermind, I figured it. It turns out that the solution was to set the USB MSC instead of MTP mode. Who would have thought?

  Thanks for any help.

• problem of sound quality (audio surge)

  I use Windows Vista. Toshiba Satellite (laptop) L350D
  When I listen to audio from my media library, if I use the windows media center or windows media player, I have sound problems. Looks like the music is booming.
  I copied all my files and tried it on a friends pc, the wave is not there.

  Also...

  When I burn a disc from my laptop, this problem of the sound quality is not transferred to disk.

  This laptop has done because it was new, I bought it in January this year.

  I had to remove WMP and WMC and reload, but I don't think it's a problem software, currently, this problem is with both programs.

  Help, please!

  1st try this

  Close all programs

  Click right click right icon "speaker" - reading - in Box - SHOW off and disconnected devices
  Devices - if they are disabled (highlight as appropriate - properties)

  Now select speakers - properties (lower-right) - Enhanced Tab - check DISABLE sound effects.

  Under the general tab - tab drivers controller information - properties -.

  Please tell me provider - driver version and date.

  APPLY/OK on

  What version of windows you have, and 32 or 64 bits.

  Your laptop is a L350D-Sxxxx can you tell me the number of entire model with this Sxxxx

  (look on the back/bottom) or on paperwork or box.

  There are quite a few updates audio driver for your system, and we must get the best/most recent
  driver Toshiba or Realtek (RealTek audio HD makes your system probably uses I'll
  confirm one I know the info.)
  Rob - bike

• Problem with my Sansa plu and the switching of computers?

  I have a Sandisk Sansa clip plus 8 GB. Recently, I switched from windows to Ubuntu, and even if the player is filled with music, the (MSC mode) folder is empty on the computer! I guess that's because I used windows/windows media player and MTP mode. When I transfer new music, it normally appears on the player and the computer. But the old music normally played on the player - seems to have gone on the computer.what can do about it?

  Thank you

  I guess that's the issue of the MSC/MTP mode:

  When the drive is connected to your computer using the USB MSC (the value of the player in settings/USB mode), your computer only sees the files that had been moved to the drive when the drive is connected in MSC mode.  Similarly with regard to the MTP mode.  However, all the files appear and can be played on your player, under some USB mode setting.

  A reason why some people prefer to set the USB Mode on their player to MSC or MTP: setting Auto, the Player tries to connect in MTP mode but then you will return in MSC mode if the connection of the MTP does not; as a result, you can have a mixture of MSC and MTP mode transferred the files to your drive, making some of them isn't visible on your computer without going to the other USB mode.

  Because MSC mode is more universal (playing with a wide range of operating systems, including Linux and on Mac, and without the need for Windows Media Player on the computer), some people prefer MSC mode.  However, note that the DRM (digital rights management) files need MTP mode - they will not transfer enough (the DRM license will not transfer) in MSC mode.

  If you currently have a mixture of music MTP and MSC mode on your Clip, you can: put the Clip fashionable want to 'delete' your reader. to connect to your computer; Copy your music on your computer and delete the originals of your Clip. Unplug your Clip to the computer; Set the USB mode to your Clip to the other mode, that you want to use in the future. Reconnect your Clip to the computer; Re - transfer your music from your computer to the Clip; and disconnect.  And now, to keep the Clip value mode USB mode (it can set after an update firmware - always doublecheck it after an upgrade).  Voila!

• How can I me floor device works with my sansa clip zip 4 GB mp3 player?

  Device stage seems to be a nice software to sync music from computer to my new mp3 player, but it doesn't seem to be in my new Windows 7 software? What should I download it?

  Or what I need to download (also) on the Sansa Clip Zip?

  Help please..!

  Thank you

  / Leif

  Read here.

  See you soon,.

  Jerry

• Sansa Clip and Slacker Radio?

  Does anyone know if the Sansa Clip will work with Slacker Radio?

  Any info is appreciated!

  As Slacker internet radio, and the Clip (or indeed any Sansa player) is not, I don't see how.

• Purchase of Sansa Clip and memory card

  I'm about to buy a Sansa Clip. I was planning on getting a 2 GB mp3 and the purchase of a 16 GB memory card.
  My question is, will they work together? A 16 GB card will work in a 2 GB drive? And the memory card should be SanDisk or can it be any business?

  Your help and your answers would be greatly appreciated!

  The Clip doesn't have a slot for card, only the Clip + and Clip Zip. Any size to maximum 32 GB will work. Any brand should work, but there has been reports of some brands does not not with the Zip model. That was supposed to be addressed in an update of the firmware, but to play in the trunk, I'd buy a SanDisk brand.

  And you can consider getting a larger capacity of 2 GB player. The extra cost is not much, and this extra room will be useful. Music libraries tend to develop, especially now that you have a cool gadget little listening to load them on.

• Sansa Clip + and a Mac

  I have a Mac with Maverick 10.9.2. I was looking for an MP3 rather than the MP4 to iTunes. The Amazon comments suggested the Clip +.

  I closed iTunes, plugged in the Clip +, opemned music and dragged air from a CD. I got alrteady put the clip on MSC.

  I ejected the Sansdisk icon, unplugged and the Clip + says no songs. I did it in every way I can think of and no still no music.

  Am I missing something, is my defective video or is it simply not made for Macs.  FM works well make me think that the problem is only the Mac for Clip + communication.

  Thank you

  It is not incompatible - you just need to mp3 files that are compatible in all areas.

  What you tried to do with the CD would not work with an iPod either. If you look at a CD on a computer that shows the types of files, you will see a list of .cda files. These are basically the index on CD - they say the music (iTunes, Windows Media Player) Player where to look for the disk.  You put a bunch of the index files of tiny 44 KB on your player - they do not play. Not a question of compatibility, just wandering way work.

  http://en.Wikipedia.org/wiki/.cda_file

  CD needs always to be converted or ripped - Apple calls it 'imported' - so their files can be used in a music player - doPi, Sansa, Sony, phone, whatever.

  If you leave the default settings in iTunes it will tear .m4a files - files Apple owners. If you change the default settings for iTunes (search for the import settings, iTunes continues to move them around) then you can make it the default .mp3 320 Kbps, which is compatible with all autour.

  If you are an audiophile you want to rip in FLAC instead, which would take different software - but assuming that you use the high-end portable headphones music player less, to 320 mp3 is fine.

  If you have a library formats Apple iTunes, you can convert them to mp3 in iTunes. You can get a Zip Clip instead, or geek and use Rockbox to play the m4a files on the Clip.

  If you're new to CD, you can pull them out directly to .mp3.

  By the way, I hate both the latest version of iTunes. They completely screwed up the interface. You can try to roll back to a version that you like:

  http://www.OldVersion.com/Windows/iTunes/

• Sansa Clip + and micro sdhc 4 GB class6

  I have a problem with my micro 4 GB class6 sdhc, I bought some time in October. I used as storage of mp3 to my cell phone.

  Since it is a basic phone what can I do to connect to the computer to drag and drop songs is via card reader, I later scanned to ensure that he is not infected with virus or anything if I know that my pc is clean.

  the scan do not always go through. 4% and more it stops and do not complete the scan.

  I go back to my computer and right-click on the icon of sdhc to check the properties. the computer can detect the sd card (because the icon is there), but it does not display the content and songs more. even the SD is not displayed. capacity of 0 KB.

  I don't know if it is a virus, or maybe the lock on the card adapter switch has something to do with. Maybe I dragged songs while the lock is activated.

  What could be the problem?...

  I did a format already, but in case where (just in case) the cause is a virus, or say that the map is broken it will affect my clip +?

  BTW, I did not insert the card to my clip + so far...

  Thank you very much in advance

  Sometimes, a mobile phone will do things to a map to interfere with the use of the drive.  A solution was to reformat the card in the phone and then try again (and I could reformat and then again to the reader).

• Problem of Bluetooth connectivity with Oticon hearing aids and 10 of the IOS.

  I use the Oticon Streamer Pro 1.3 to connect my hearing aids to my iPhone 6 more via bluetooth.  With the IOS 10 update the streamer keep disconnection, reconnection and disconnect.  I tried forgetting the device and once again pairing with the iPhone.

  Hi, Dick

  I have similar problems with my hearing aids Starkey.  iOS 10 broke the bluetooth.  I've been working with Apple, he's broken, no solution until the next update.  Incidentally 10.0.2 is not the solution

• Play the Sansa Clip, and small stereo room

  I just got my Clip more today.  One of the things I wanted to really be able to do was play through the small stereo I have in my room.  I did a little research before you buy the video and found that what I had to do was to buy a cord that had the stereo mini plug plug at one end and two RCA plugs at the other end.

  I connected the Clip on my stereo in this way, ensuring that choose "line in" the energy input to the system, but in this stereo which, otherwise, has more volume I have ever NEEDED, I hear just whats playing in the Clip, even with the volume on the stereo completely maxed out and the choice of 'stronger' selected on in the clip.

  Any ideas?

  RandyMyers wrote:

  I just got my Clip more today.  One of the things I wanted to really be able to do was play through the small stereo I have in my room.  I did a little research before you buy the video and found that what I had to do was to buy a cord that had the stereo mini plug plug at one end and two RCA plugs at the other end.

  I connected the Clip on my stereo in this way, ensuring that choose "line in" the energy input to the system, but in this stereo which, otherwise, has more volume I have ever NEEDED, I hear just whats playing in the Clip, even with the volume on the stereo completely maxed out and the choice of 'stronger' selected on in the clip.

  Any ideas?

  The volume on the side of the clip must be turned up all the way, and the EQUALIZATION left on 'Normal' for a better result... but make sure that you turn the volume on your stereo first before you press play.

• Problem running the report with the Web Service and BI Publisher

  Hello
  
  In fact, I'm trying to run a report of Bi Publisher via the Web Service.
  I use the following documents:
  -http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e10416/bip_webservice_101331.htm
  -"How to integrate Oracle BI Publisher via Web Services in the form of Oracke.
  
  Everything works fine. But when I try to copy the file on the local computer is 0 length. I use the method of "getReportBytes".
  Here's the code I tried with:
  
  String userName = "Administrator";
  String password = "Administrator";
  
  System.out.println ("calling" + myPort.getEndpoint ());
  System.out.println (myPort.validateLogin (username, Password));
  
  ReportRequest repReq = new ReportRequest();
  RepRes ReportResponse = new ReportResponse();
  
  repReq.setAttributeFormat ("pdf");
  repReq.setAttributeLocale("en-US");
  repReq.setAttributeTemplate ("sales world");
  repReq.setReportAbsolutePath ("/ Sales Manager/World Sales/World Sales.xdo");
  
  repRes = myPort.runReport (repReq, userName, passWord);
  System.out.println (repRes.getReportContentType ());
  
  Byte [] binaryBytes = repRes.getReportBytes ();
  OutputStream out = new FileOutputStream ("D:
  out.pdf");
  out. Write (binaryBytes);
  out. Close();
  System.out.println ("success for performance report');
  
  Thanks in advance.

  Hello

  I assume you are using 10.1.3.4. Otherwise, my index is not relevant to you...

  There is a new parameter in the web service API to set the size of the segment. HéLas is by default not so, the behavior is as in versions (not size segment... the entire document at once). If you set the size of segment-1, you should get your document. So, try adding
  repRequest.setSizeOfDataChunkDownload(-1);

  concerning
  Rainer