Issues group

Similar Questions

• Restart issues "Group Policy Client Service could not connect." "The media is write protected."

  The problem arises when a Norton message requires a reboot. It does not get me beyond the point when Windows prompts for a password. The words appear on screen reboot problems ' Customer Service Group Policy has no connect. " "The media is write protected."

  I cause the phone to crash in order to activate the Windows repair program.  It works but the custody of Norton is disabled. A program Norton Repair heals so that the fault.

  I had several chat sessions with Norton, but they now point me to Microsoft saying that it is a Windows program that is related to Norton.

  Hi ColinAW,

  Your computer is connected to a domain?

  The question could be linked to the program Norton himself. I suggest you try the following steps:

  Step 1: Disable Norton Security software; Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

   

  Step 2: The computer in the boot and a test

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If this problem occurs only updated Norton software, of course, the problem is related to the Norton software, and you can check with Norton again for any patches to address this issue.

  http://www.Symantec.com/Norton/support/index.jsp

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Issue group Variable

  I defined a TierWinDir variable with a constant value of tst. on group work, I use dev. When the job runs it does not use the value on the working group.

  Please notify. Thank you
  Warren

  Hey Warren,

  This looks like a pretty good idea and then to treat one-off measures with a different value. So, I just wanted you develop your findings a bit with a group of work variable not based on a global variable.

  Variables defined in definitions are known to be global variables (public), while the variables defined within a working group are variable local. Here at the working group level, you try to access TierWinDir.132 which is a global variable, and change its value. So, instead you create a local variable to the level of the Working Group and call the local_variable. Then the local variable can be assigned to the value of TierWinDir.132 (but not directly to the variable itself), and have passed local variable to the children jobs. And for one-offs, variable_locale values can be specified differently at the working group level.

  ARO

  The Derrick

• ISE - issue group identity

  Is there a way to match the groups active directory external to internal? It seems that I cannot use the internal groups in political posturing and politics of provisioning of customer. Is this correct?

  Hello

  You can create the policy so that the external group attribute ad is a component of the policy.

  When adding a new condition on the left side, select the advanced option, you'll see AD select it the external group attribute.

  From there, you can choose the operator followed by the value that you selected on the tab groups under Ad settings.

• Issues group layer

  I have problems with Photoshop CC. Every time I try to catch a layer in a layer set, I always get the whole group. I'm unable to grasp the different layers. I thought it was the fault of my Wacom pen but I reinstalled the latest driver, but it still doesn't let me select and move individual layers. I use the latest version of Photoshop CC. Any help greatly needed and appreciated. Layer

  Check the settings you use in the move tool. Very probably, set it to auto groups.

• issue grouping RTF model

  Hi all
  I have a requirement as below.
  
  The report header section contains: order number,.
  Email_address,
  ..................
  
  the part of the body of the report contains the details of each order as
  
  Item number, name of the option
  ...
  Yet once the line section is based on the Group another, so it must be repeated for each group.
  
  My requirement is in the header for each order section and your email I need to repeat the whole header and a command line.
  
  Ex: Header: Order_number: 101
  E-mail: abc & gmail.com
  Section of the line:
  
  Here we have another group like demand_class
  
  DEMAND_CLASS: 'ABC '.
  Item1: abc,
  Article quantity1: 1
  
  DEMAND_CLASS: "DEF".
  
  Item2: abc,
  Article quantity2: 1
  ................
  
  
  Header: Order_number: 101
  E-mail: def & gmail.com - same data by e-mail only changed
  Section of the line:
  
  Here we have another group like demand_class
  
  DEMAND_CLASS: 'ABC '.
  Item1: abc,
  Article quantity1: 1
  
  DEMAND_CLASS: "DEF".
  
  Item2: abc,
  Article quantity2: 1
  ................
  
  
  
  
  
  
  
  Another section: to display the total calculation for each category of application for an order.
  
  
  My requirement is to repeat the same data for each order and your email address.
  
  Please help me on this

  example of output transmitted. Check your Inbox and let me know the necessary corrections.

• Do not select background in FCPX for the title of motion

  I created a Motion 5 title and published all the settings for the properties, and the form of a 50% opacity rounded rectangle background. I can't select text in FCPX, but I can't select the background of the rounded rectangle. I did a generator of the same thing and impossible to select the background that helps in FCPX either. How should I do the text and the background selectable in FCPX?

  

  I'm slow to grasp the concepts of the video, am brand-new to the use of FCPX and have used only Motion for a few months for limited purposes, so it is very likely, that miss me something quite obvious.

  'select' the rectangle? To apply adjustments such as color, roundness?

  

  Or you want to move your custom title?

  If so, I would like to...:

  

  .. Put the text and rectangle in a group and issue groups X / there postions...

  So, when you change your contact information in FCPX, both, the bubble and the text pass.

  I FINALLY how: apply a nice OnScreenControl and not x / y numbers:

  

  .. to drag the title with the mouse...

• New product key required... where to buy?

  Hi, I want to buy a new product key for my Vista installation, but seem to go in round cirlces, on the site of Ms. Can anyone offer a definitive link where I can go and get a? Please don't tell me that they are no longer available... :-(

  Hi, Monica.

  How to request a new product key

  If you don't have the product key to your Windows operating system but still have the original disc, you can request a replacement of Microsoft product key for $10USD.

  You need to have a valid product key to install Windows. Your only alternative is to buy a new copy of Windows it will hurt at least try to get an inexpensive replacement of Microsoft.

  Follow the instructions below to request a new product key for Windows 7, Vista or XP Windows:

  Difficulty: Easy
  Time: Request a replacement of Microsoft product key will probably take you about 20 minutes.

  Here's how:

  1. Determine whether your copy of Windows is a copy retail or preinstalled copy:

     Retail: Your copy of Windows is a copy retail if you or someone else has bought Windows as a stand-alone software and then installed on your computer. Your copy of Windows can also be a copy retail if it came on your new computer and that your computer was delivered to a small manufacturer. Proceed to step #3.

     Pre-installed: Your copy of Windows is a pre-installed copy if it was already installed when you purchased your new computer. This is probably the case if you have a big brand PC and you have never installed yourself a new copy of Windows. Refer to the step #2.

     Other: If you have purchased or received a copy of Windows to your organization, company or other group, see step 2 but contact the issuing group instead.

  2. Contact your original computer manufacturer directly to request a new product key if Windows was preinstalled on your computer.

     If the manufacturer of your computer is not able to help you delivering a replacement for Windows product key, go to step 3. Microsoft may still be able to help.

  3. Contact Microsoft at (800) 936-5700.

     Note: It is the telephone number of Microsoft Support paid . Microsoft site advises that calls to technical support at this number will incur a charge of $40 to $60USD. You does not charge this amount to a call regarding a new product key.

  4. Follow the prompts to auto attendant correctly then you can speak to a customer service representative your missing product key.

     I could join a man after only three issues - not too bad, in my opinion.

  5. The Microsoft representative will take your contact information - name, phone number and address - email and then to ask for details about your problem.

     Tell the representative that you have your original CD/DVD Windows installation but need a replacement product key.

  6. Answer all questions asked of you. The representative of Microsoft can seek clarification on your installation disc of Windows, as the numbers around the inner circle of the CD/DVD and know what words or images that may or may not be on the disk.

     Microsoft asks these questions in order to verify that you have the installation disc is not hacked.

  7. Microsoft will take your credit card information after verifying that your installation media is genuine.

     This new Windows product key should cost you $10USD. Some readers even sent telling me that Microsoft doesn't have them pay nothing at all so they either change their policy or some people are just lucky!

• Microsoft representative then you will read your new product key and ask that you enter in the activation window to be sure, it creates a new installation code.

• He or she will then transfer you to the Center to activate by phone to complete the process activation of Windows.

  Note: If for some reason you are not able to get a replacement of Microsoft product key or the manufacturer of your computer and your copy of Windows is not installed (exclude you the product keys finder method), then your last course of action is to buy a new copy of Windows - Tim Fisher

• to report... 15000 lines but only a few in dataset, which hurts

  Im doing a report, there are 15000 completely lines which im trying to get the data for each project.
  Everything works great and ends, but there are only a few records in the dataset?
  is it because there are most likely many fields are null and null if its does not display this project? I don't really know.
  
  
  This is the query that I just finished.
  
  
  
  

  select 
  pm.project_number,
  pm.proj_id,
  pm.proj_title,
  fm.num_of_folders,
  dc.num_of_docs,
  dc.doc_size,
  pu.num_of_users,
  pg.num_of_groups,
  ra.rfi_attachment,
  rf.rfi_wo_attachment,
  ia.issue_attachment,
  iss.issue_wo_attachment,
  rl.redline,
  cn.company_name
  
  from 
  project_master pm,
  (SELECT
        COUNT(1) AS num_of_docs,
        TRUNC(SUM(doc_file_size)/1048576,3) doc_size,
        proj_id
      FROM
        document_master
        where doc_status='A'  GROUP BY
        proj_id)dc,
  (select company_id,company_name from company_master)cn,
  (select  
        proj_id,
        COUNT(1) AS num_of_folders 
      from doc_folder_master
        where status='A' group by proj_id
        order by proj_id) fm,
  (select  
        proj_id,
        COUNT(1) AS num_of_groups
      from user_project_groups
         group by proj_id
        order by proj_id)pg,
  (select  
        proj_id,
        COUNT(1) AS num_of_users
      from project_users
         group by proj_id
        order by proj_id)pu,
  (select 
        proj_id,
        COUNT(1) as REDLINE 
      from document_master 
      where doc_id IN
          (select parent_file_id from DOCUMENT_REDLINE_MASTER)
      group by proj_id)rl,
  (select proj_id,COUNT(1) as issue_attachment
  from issue where issue_id IN (select parent_object_id from attachment_master)
  group by proj_id)ia,
  (select proj_id,COUNT(1) as issue_wo_attachment
  from issue group by proj_id)iss,
  (select proj_id,COUNT(1) as rfi_attachment
  from rfi where rfi_id IN (select parent_object_id from attachment_master)
  group by proj_id)ra,
  (select proj_id,COUNT(1) as rfi_wo_attachment
  from rfi group by proj_id)rf
  
  
  
  where dc.proj_id=pm.proj_id
  and cn.company_id=pm.company_id
  and fm.proj_id=pm.proj_id
  and pg.proj_id=pm.proj_id
  and pu.proj_id=pm.proj_id
  and rl.proj_id=pm.proj_id
  and ia.proj_id=pm.proj_id
  and iss.proj_id=pm.proj_id
  and ra.proj_id=pm.proj_id
  and rf.proj_id=pm.proj_id

  Published by: Jay on March 21, 2011 09:41
  
  Published by: Jay on March 21, 2011 09:42

  You must join your project with other tables as an OUTER join.

  The State must in the end be:

  ...
  where dc.proj_id(+)=pm.proj_id
  and cn.company_id(+)=pm.company_id
  and fm.proj_id(+)=pm.proj_id
  and pg.proj_id(+)=pm.proj_id
  and pu.proj_id(+)=pm.proj_id
  and rl.proj_id(+)=pm.proj_id
  and ia.proj_id(+)=pm.proj_id
  and iss.proj_id(+)=pm.proj_id
  and ra.proj_id(+)=pm.proj_id
  and rf.proj_id(+)=pm.proj_id
  

  I hope I put the "(+)" on the right side of the equation. It's some time I wrote no ansi sql.

  In ANSI SQL OUTER JOIN would be written like this

  select
  pm.project_number,
  pm.proj_id,
  pm.proj_title,
  fm.num_of_folders,
  dc.num_of_docs,
  dc.doc_size,
  ...
  from  project_master pm
  LEFT JOIN (select COUNT(1) AS num_of_docs,
          TRUNC(SUM(doc_file_size)/1048576,3) doc_size,
          proj_id
         FROM document_master
        where doc_status='A'  GROUP BY
          proj_id) dc
  ON dc.proj_id=pm.proj_id
  LEFT JOIN (...) fm ON fm.proj_id=pm.proj_id
  LEFT JOIN (...) pg ON pg.proj_id=pm.proj_id
  ...
  

• Issue of group policy

  Is it possible to implement a group policy of global domain so that users cannot change their name to the machine, even if they are admins on their machine only?  Computers running Windows 7 or Mac OS 10.x

  Hello

  Thank you for details on the issue.

  If all the computers are connected to a domain network, then you can implement Group Policy.

  For further assistance in this matter, I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Thank you

• Issue of calendar entries sharing with groups of BBM blackBerry Smartphones BB Curve 8520-

  Greetings!

  I am currently using a BB Curve 8520. I have a problem with the birthday entries sharing with my BBM groups.

  When I add a birthday entry to my contacts from the phonebook, the phone will ask whether or not you will share this date with the BBM groups calendar.

  If I select No., birthday entry will continue to BE SHARED to your BBM groups.

  So I have to go to the calendar of the BBM groups to delete manually created entry.

  Can you help me to solve this problem with my phone?

  Thanks in advance!

  Hi, Ahmed.

  Follow the steps; below

  1. take a full backup of your device.

  2 reset the device (Do a security wipe)

  3 register your device with Netowrk.

  4. return the maintenance book.

  5. If more than one e-mail account then delete pulled CICAL service book of reset. (but keep a default for CICAL service)

  6. now, do a restore advance except BBM GROUP and data.

  7. now, create a new entry in the calendar.

  Please read the following threads for more info:

  http://supportforums.BlackBerry.com/T5/BlackBerry-App-World-General/calendar-issues-BBM-Group/TD-p/6...

  Courtesy: Santosh-Boiro

• Issue of Group Chat

  For some reason, I can't change the image or many people, even if I am the creator of the group conversation. If I was the creator of the group or not, I used to be able to change the icon and evict people, now I can't do not. D: Why is this? Please tell me there is a solution to this dilemma. ; u;

  http://community.Skype.com/T5/Mac/I-can-t-change-the-profile-picture-of-my-group-chat/m-p/3188002#M6...

• Local administrator account and issue of local Group Policy permissions problem.

  You have a local administrator account where it was defined

  http://img26.imageshack.us/img26/5716/18112010133154.PNG

  I think preventing the admin account to remove or install devices.  This causes a problem.  Looks like it's AD GP as is grayed out and I can't add locally.  The network team claim there is no GPs AD to limit the admin account local they know of.

  Also, I try to use the process on the machine monitor, but who needs administrator rights and he repeats that the local administrator account is not a member of the Administrators group, but it is.

  Any ideas?  Even if it's just he Process Monitor bit setting?

  And looking at the photo can someone explain which means that icon next to load and unload device drivers.  It is different from the others and think that it is linked, may be trying to tell me that it is a strategy of AD Group.

  I talked to the networks, they said there is not together AD GP for this.  I used the local administrator account to create a new local administrator account and put it in the Administrators group.  Connected to it and it also has the same problem.

  Any ideas?

  The symbol, that you reference indicates that the setting has been locked by group policy and is not editable.  When I saw it in the past, the only way I could replace, it is using "secedit".  For more information about this command:
  Starting-> help and support-> Search: Secedit

  "Elephant Gun" approach might also work:

  "How to restore the security settings the default settings?
    <>http://support.Microsoft.com/kb/313222 >

  HTH,
  JW

• Issue of call Pickup group

  I have a problem with that I hope someone can help me. We have an Executive Assistant who responds to calls for extension 1111. If it is unable to meet the line (whether or not she is using his phone), 5 other people should have the opportunity to respond. If no one answers, he should go to the voicemail of 1111 after 15 seconds. We would prefer not to use a grouping of positions. We can't put all these primary lines in the same pickup group call because she should not receive notification when the other five lines ring. I want essentially is a pickup group call one-way or something equivalent. Here's a sight which I think should work, but does not work...

  1 create a pickup group call called ExecCPG and set it for audible and Visual notification after 6 seconds

  2. Add ExecCPG 1111

  3. create a second "dummy" with DN 1112 line and add it to ExecCPG

  4. Add 5 other phones in the building as Line2 1112

  Now, I guess when 1111 is called and is not answered, there will be an alert on the other 5 phones and they would be able to respond to the line. Calls to 1111 which are addressed in the first six seconds will not generate an alert on all other phones.

  The problem is this sight does not work. If I go to one of the secondary phones leaving Line2 1112 to Line1 Call Pickup group works as expected. When 1112 is on Line2 it does not all alerts Call Pickup group.

  We run CUCM 9.1.1.20000 - 5. All phones are model 8941 running SCCP8941_8945.9 - 3-2-11.

  Any help would be appreciated.

  Thank you

  Scott

  Hi Scott,.

  The problem here is that Notification of collection is available on the

  Main line of the unit as shown in this clip;

  Call Pickup notification.

  To configure if the notification will be audio or Visual, or both, use the settings in the section call Pickup Group Call Pickup Group Configuration window Notification settings. Notification is sent only to the first line of a device.

  http://www.Cisco.com/en/us/docs/voice_ip_comm/CUCM/Admin/9_1_1/ccmfeat/CUCM_BK_C3E0EFA0_00_cucm-features-services-guide-91_chapter_0111.html#CUCM_RF_C01660EF_00

  I probably just add 1111 on the phone of the administrator and assign the FNA 1112 with the

  FNA timer on 1111 to 6 seconds. Then configure the DN 1112 on 5 other phones and the FNA

  timer to 9 seconds with the FNA to go to your voicemail.  In this case call pick-up is not

  probably the 'better' bet

  See you soon!

  Rob

  "When it comes to luck make you your own.

  -Springsteen

• Group Policy - software package deployment issues via GPO

  Hello world

  I have a customer requirement that a 3rd party browser plugin must be installed in all versions of IE. Since the manual installation consumes huge person-hours, has planned to use the GPO

  Created GPO & home to respected UO - computer configuration--> policies--> the software--> Software Installation settings

  Plugin is not installed in any PC, all computers has following errors in eventviewer

  Event 101 ID - the assignment of application OrgPublisher PluginX 11.5 of policy chart plugin - msi deployment failed.  The error was: % 1274

  Event ID 103 - the removal of the assignment of the OrgPublisher PluginX 11.5 of the strategy chart plugin - msi deployment failed.  The error was: %value%

  Event ID 108 - cannot apply changes to software installation settings.  The installation of the software deployed through Group Policy for this user has been delayed until the next logon, because the changes must be applied before the user logon.  The error was: % 1274

  Kind regards

  Karthik V

  Hello Karthik,

  Thanks for posting your question on the forum of the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you