Issues of Lightroom import of cr2 files

Similar Questions

• I have a 80 d but iPhoto, Lightroom 5 & Photoshop will not import RAW (CR2) files

  I just bought n 80 d and was happy with the possibility of processing the RAW (CR2) files, but all my photo programs will not import the files, because they are not recognized. iPhoto, Photoshop and Lightroom 5.  I'm under Maverick on my Mac.  Strange thing however, Image Capture will import them. Any suggestions?

  The 80 d is a bit too new.  It is normal that updates camera RAW trolling a few months.

  I see that Adobe does support your camera if you upgrade to Lightroom CC.  See: http://blogs.adobe.com/lightroomjournal/2016/03/camera-raw-9-5-now-available.html

  As for Apple, you can see a big difference between updates of the Mavericks:

  https://support.Apple.com/en-us/HT201071

  vs updates for El Capitan (Mavericks is two complete versions behind):

  https://support.Apple.com/en-us/HT205272

  Even though Apple has not yet released the Digital Camera RAW for the 80 D update, I'm pretty confident that you will find that you have to upgrade to get to El Capitan.  BTW, OS updates are free from Apple.  Just launch your app 'App Store' and check the updates and you should see which indicates that an upgrade of the OS is available for you.  (Apple has stopped selling updates of the BONE several years ago.)

• Lightroom will not import the cr2 files

  I'm trying to import CR2 files in Lightroom and it is said that "certain import operations were conducted not.» The following files were not imported because they could not be read", then it will display the file name. I saw on the forum where it is perhaps a mistake to write, but I don't know where to go to change these settings. I use an iMac on the latest OSX and the most up-to-date CC. I'll be the first to admit that I'm not an expert with the product.

  You go to your operating system (Mac Finder) and change the permissions on the folder to READ & WRITE permission. Which folder? The folder specified in the import in Lightroom under Destination dialog box.

• Lightroom keeps loading CR2 files but don't actually load

  Since this week when Lightroom opens a catalog or even when a new catalog is created Lightroom displays "loading" and then finally said "Lightroom has encountered a problem with the (new) catalog and verify catalog when it starts up next." Then it closes. When I then start Lightroom indeed, it checks the catalog but when click on any file CR2 the same thing I get ha\ve been importing since Lightroom 4 CR2 files so I don't understand what the problem is, I have reinstalled Lightroom, created a new catalog, but the question remains. any help will be appreciated?

  Here is the system info LR showed me

  Lightroom version: 6.0 [1014445]
  License: Perpetual
  Operating system: Windows 8.1 Business Edition
  Version: 6.3 [9600]
  Application architecture: x 64
  System architecture: x 64
  Number of logical processors: 8
  Processor speed: 3.3 GHz
  Built-in memory: 8150,0 MB
  Real memory for Lightroom: 8150,0 MB
  Real memory used by Lightroom: MB 501,0 (6.1%)
  Virtual memory used by Lightroom: 451,3 MB
  Memory cache size: 1.6 MB
  Maximum thread count used by Camera Raw: 4
  Camera Raw SIMD optimization: SSE2, AVX
  System DPI setting: 96 DPI
  Composition of the Bureau enabled: Yes
  Exhibition: 1) 1680 x 1050
  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.

  Graphic processor News:
  GeForce GT 430/PCIe/SSE2

  Check the supported OpenGL: past
  Provider: NVIDIA Corporation
  Version: 3.3.0 NVIDIA 353.62
  Rendering engine: GeForce GT 430/PCIe/SSE2
  LanguageVersion: 3,30 NVIDIA via the Cg compiler

  
  The application folder: C:\Program Files\Adobe\Adobe Lightroom
  Library path: L:\1_LR Catalogue\2016_Catalogue\2016_Catalogue.lrcat
  Settings folder: C:\Users\DV_PC\AppData\Roaming\Adobe\Lightroom

  Plugins installed:
  (1) Behance
  (2) substantive canon Plugin
  (3) Facebook
  (4) Flickr
  (5) attachment Plugin Leica
  (6) fusion and change in HDR Express 2
  (7) attachment Plugin Nikon

  Config.LUA flags: None

  Map #1: Seller: 10de
  Feature: 1
  Subsystem: 836d 1043
  Revision: a1
  Video memory: 973
  Map #2: Seller: 1414
  Device: 8 c
  Subsystem: 0
  Revision: 0
  Video memory: 0
  AudioDeviceIOBlockSize: 1024
  AudioDeviceName: Speakers (Realtek High Definition Audio)
  AudioDeviceNumberOfChannels: 2
  AudioDeviceSampleRate: 44100
  Build: not initialized
  Direct2DEnabled: false
  GPUDevice: not available
  OGLEnabled: true

  Hello

  After exhausting all other options I finally managed to fix in any first uninstall Lightroom, by removing the corrupt catalog and then by removing completely all Lightroom of the whole registry keys. Restarted my PC and reinstalled LR6 a moment while it is important to the photos again, it finally loads cr2 files correctly, only a little slow now that it is always important to photographs (it takes about 7 hours), but I am sure that the problem is resolved.

  Thank you for your support

  Daniel

• Can not see the previews after the import of CR2 files

  Hello

  This problem happened all of a sudden...

  When I import NEF for Nikon or canon raw cr2 files, I don't see the previews.

  The progress bar gets stuck on building smart surveys and I see a greyed out box.  When I choose an area spotted Gray and go into develop and then the preview is displayed and I can change the image.

  Can anyone help please?

  Thank you.

  SOLVED

  Called Adobe.

  delete all files from lightroom on laptop and start over.  works.

  Thousands...

  Removed from all catalogs began to sam problem.

  This is my last post:

  (1) a lroom 3

  (2) improved to 5.3 Ltroom

  (3) had problems all of a sudden as above

  (4) when I ran 3 Ltroom with the SAME files by importing them from scratch in ltroom 3, no problem.

  (5) uninstaled lgroom 5, reinstalled

  (6) upgraded to 5.3

  (7) the SAME problem.

  Help!

  Was it useful? Yes

• Help!  I can't import. Cr2 Files in Lr4?

  I have a Canon Digital Rebel T3 and every time since yesterday, I tried to import images it told me it can't read the file *. CR2.  I am relatively new to photography but would like to know what a. CR2 file is and how all of a sudden I get their and he won't let me import them.  Accidentally change a setting in Lr4?

  Any help is appreciated.

  Thank you!

  I don't know, but it works now...  The. CR2 (RAW files, I discovered) are imported after changing the destination directory.  I didn't like the place where I had happened before as a destination.  Disk space is not a problem either...  So, I don't know.

• Lightroom 2.7 question import of CR2 files

  I've been using Lightroom 2.7 with raw images from my Canon G10 with success for several years, but I just had replaced it with a G12 Canon G10. When I downloaded my photos the first time, and I tried to import them, get errors telling me that they do not have the import. They are in CR2 format files.

  Any ideas on what's going on? I can see the raw images in the end Canon software.

  Your new camera has not been supported in Lightroom 2.7. You will need to update to Lightroom, or else use the 7.1 DNG Converter to convert your raw digital negative images. Then you can open these files with Lightroom 2.7 DNG. The version of Lightroom you use is really obsolete. I think you would find you get good results if you upgraded to Lightroom 4.1. But it's your choice.

• Import the CR2 file does not

  I can't import Canon raw photos, I get the message "the following files could not be imported because they could not be read:... cr2.".  The message arrives at the beginning that the picture appears after I press the import button.  What is new, I used Bridge instead of import and it works without problem.

  Please help me.

  Harald

  Problem solved... Ran repair disk on the hard disk. Found and repaired the problems disk utility. Download now Lightroom as usual function. May need to empty the trash if the HD is unable to dismount.

• Lightroom Import do not file [double wire: locked]

  Help!  Lightroom any pictures from Canon 50 d.  Bring thumbnails, click Import, and it just happens.  After canceling has tried to import, said he can't read JPEG files.  I've upgraded to Lightroom 6.3 in an attempt to fix bugs, but no change.  Loads of photos with no problem opening.  I use Mac OS X El Capitan with last update.  Any help appreciated.  Lori

  Duplicate thread: Lightroom does not import files

• Why can't I import CR2 files in Lightroom?

  When I try to import a CR2 file I get a response that the files are not recognized by the assumption of raw in Lightroom.

  I downloaded the latest version.

  I use a Canon 7 d Mark II

  Click Help and at the bottom of the context menu, you should see:

  On Adobe Photoshop Lightroom 5.7.1

  This is the latest version.

  Otherwise, if you have installed via a subscription cloud creative launch CC Office and install the latest version of Lightroom from there.

  If you have a purchased stand alone version of the LR5, go to:

  Help > Check for Updates

  Install 5.7.1

• New to Lightroom, import of raw CR2 files problem.

  I am new to Lightroom and can't import my raw CR2 photo files. In the section "import", I select my SD card that contains the raw image files. All the map .jpeg files appear as thumbnails, but the CR2 files show "extract not available for this file. I select one of the thumbnails CR2 anyway, select a folder on my external hard drive and click on "import". A window pops up that says: "this file is not recognized by the format of raw support in Lightroom." I use Lightroom 4.4 and works with a Windows Vista operating system (on a laptop old, junky). My camera is a Canon 70 d and am shooting in RAW + JPEG. I also downloaded the Adobe software. DNG Converter 6.3 to try to convert the files before importing them into Lightroom and it is also not recognizing and import my CR2 files. Don't know what to do at this point. Any suggestions?

  I would recommend download DNG Converter 8.2 which is compatible with Vista.

  The latest version 8.6 requires W7 and W8

  Use this download link:

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5646

• [CS4]. CR2 file format not supported

  I'm lying to import raw CR2 files in Premiere CS4 v4.2. I have no problem viewing in bridge or Camera Raw. It also looks like Adobe Media Encoder 4.2 will not install (it appears whenever I check the updates), but I don't know if this has nothing to do with the first problem with CR2 importinf.

  I would be grateful for any help.

  1. Read here: File Formats supported for import.
  2. Then, go here: Adobe - feature request/Bug Report Form

• Importing in lightroom Canon cr2 files 5

  I recently updated from a Canon 550 to a 760 D. Since when I could not import new raw files in CR2 format. I had no problem with the import of these files before changing my camera. I checked and han perfectly up-to-date with updates to Lightroom?

  !

  Hi miketwine,

  Canon D 760 requires at least 6.0 Lightroom. See devices supported by Adobe Camera Raw

  Upgrade to Lightroom 6 or use the DNG Converter to be import in ti in Lightroom.Refer Google dng files

  Kind regards

  Assani

• Lightroom will not import cr2 files in el capitan

  Installed El Capitan on my iMac, and now Lightroom CC will read imported CR2 files. No problem prior to El Capitan. What is the problem?

  lanceb96342529 wrote:

  Thanks, Sarika. Yes, that's the problem. The external drive is "read only".

  Use disk utility, it doesn't allow me to change the permissions. This leads

  me to the conclusion that the disc is "endangered". Fortunately, I have

  backups.

  Thanks again!

  Lance

  This is because more than likely than external is formatted in format Windows NTFS and you had a utility installed in your earlier version of Mac OS X that could write in NTFS formatted disks and the update of El Capitan deleted this utility. OS X can read NTFS disks natively, but impossible to write in this format. You must update this utility a version that works with El Capitan.

• 5.4 Lightroom import is not on a network cr2 files?

  Well, that's unfortunate.

  New iMac, just out of the box, the operating system updated.

  New subscription Adobe CC, all set to date.

  5.4 neither Lightroom or Photoshop CC can import CR2 files stored on my NAS.

  The Mac connects fine to the NAS. I can see the photos and copy them into my new PC, but cannot be imported.

  I know that LR does not allow to store CATALOGS on a network, but I've never had problems with the original stored raw files.

  Any advice?

  It solved!

  I don't know why it makes a difference, but once I mounted the network folder and gave him an alias on the office, LR5.4 has been able to import.

  Here are the steps:

  http://osxdaily.com/2010/09/20/map-a-network-drive-on-a-Mac/