New to Lightroom, import of raw CR2 files problem.

Similar Questions

• Lightroom turns my (raw) CR2 files in red

  Hello - I am having this problem will all my Adobe software (bridge, camera raw and lightroom). My raw files in red color change. I checked my monitor profile and I use the sRGB profile all over the place. Here's a screenshot of what question I face. As you can see, all the thumbnails have become red.

  When I open these images in my windows machine using the integrated photo viewer or Windows live photo gallery, I don't face any problem. I also open these pictures in Canon DPP and it works very well. In all the Adobe products I mentioned above, I see this problem.

  I'm new to this, ask for your help.

  Thank you

  Mahesh

  

  The two photos of this small catalogue had zero BM, HSL and Split Toning applied settings that skewed their color to Red:

  

  

  A hypothesis as to what happened is that you have edited a photo of sunrise/sunset which was for the most part only orange and seemed better with still more than orange, and then for some unknown reason only, you know, you've decided to define the LR default values to these severely fixed parameters , using Alt / Set Defaults... / update to current settings.

  With the help of your Alt / Set Defaults / reset default settings deleted Adobe your inappropriately custom LR uses by default, and your Reset using challenge all the wrong settings on each selected photo reset you.

  Reset by clicking on the picture changes its settings to whatever the faults of LR are both.  So as long as you set the default values for LR, whenever you used the Reset, it would change the default inappropriate photos.

  Normally, you would customize your default settings to make LR always use always a certain profile of camera use a small noise reduction always have whet active masking or or have LR will automatically use a default value instead of the profile of Auto lens.  You would not normally be set by default LR which included the parameters of toning and color as you did.  Of course, it was just a mistake that you did not know you had done.

• I have a 80 d but iPhoto, Lightroom 5 & Photoshop will not import RAW (CR2) files

  I just bought n 80 d and was happy with the possibility of processing the RAW (CR2) files, but all my photo programs will not import the files, because they are not recognized. iPhoto, Photoshop and Lightroom 5.  I'm under Maverick on my Mac.  Strange thing however, Image Capture will import them. Any suggestions?

  The 80 d is a bit too new.  It is normal that updates camera RAW trolling a few months.

  I see that Adobe does support your camera if you upgrade to Lightroom CC.  See: http://blogs.adobe.com/lightroomjournal/2016/03/camera-raw-9-5-now-available.html

  As for Apple, you can see a big difference between updates of the Mavericks:

  https://support.Apple.com/en-us/HT201071

  vs updates for El Capitan (Mavericks is two complete versions behind):

  https://support.Apple.com/en-us/HT205272

  Even though Apple has not yet released the Digital Camera RAW for the 80 D update, I'm pretty confident that you will find that you have to upgrade to get to El Capitan.  BTW, OS updates are free from Apple.  Just launch your app 'App Store' and check the updates and you should see which indicates that an upgrade of the OS is available for you.  (Apple has stopped selling updates of the BONE several years ago.)

• elements of Adobe photoshop 11 will not read my canon T5 raw CR2 files.

  elements of Adobe photoshop 11 will not read my canon T5 raw CR2 files.

  Why?

  need help!

  Hi Zach.

  Sorry to say but 12 items came out a few months before your camera. Adobe stops the files updated camera raw for the older editions of software in order to get people to buy new versions of software when they get a new camera. It happened to me with LR3 when I got a new camera.

  Work towers there but they are a lot of steps, and I think you would be the conversion of files to one format other than RAW (tiff?) and that I'm not sure that will happen the same.

  I think you just need to get a newer items.

• I can't open the Raw CR2 files into 10 elements

  I had to buy a new computer today.  I installed my 10 items and cannot open my raw CR2 files.  I was able to open them on my old computer.  I tried to put up-to-date as my camera raw plug in and it did not help.  I then tried uninstalling and reinstalling the elements and still does not work.  Tried to ask Adobe in the chat, but I was told that they offer no support for older versions.  Help, please!

  Following the links in my previous post.

  The 5 d Mark III was first supported by camera Raw 6.7 compatible with 10 items.

  Check and confirm that you actually have Camera Raw 6.7 installed to 10 items.

  10 items, click Help > updates to update your plug in Camera Raw.

  Manual download

  Win: Adobe - Photoshop Elements: for Windows: Camera Raw 6.7 update for 10 items

  Mac: Adobe - Photoshop Elements: for Macintosh: Camera Raw 6.7 update for 10 items

• Canon EOS D5 Mark |, Photoshop C5 does not open RAW (CR2) files...

  I bought a new Canon D5 Mark EOS |, (before I had a Canon EOS450D), but my Photoshop C5 does not open RAW (CR2) files...

  Update your ps cs5.

  you need cr 6.7 or better and ps cs5 can be updated to RC 6.7.

  update by downloading the files directly and then apply them:

  : http://www.adobe.com/downloads/updates/

• Be creative cloud for Lightroom and Photoshop support the new Canon Mark II 1DX CR2 files? [was: RAW CR2 files]

  Be creative cloud for Lightroom and Photoshop support the new Canon Mark II 1DX CR2 files?

  Yes, take care that the camera has been added in Camera Raw version 9.5.

  Devices supported by Adobe Camera Raw

• LR 4 will not import my. CR2 files?

  I have imported all of a folder that contains many subfolders (around 9 000 files in total) and LR 4 did not import the. My 5DM 3 CR2 files. I received the following message after the import:

  The files are a camera which is not recognized by the assumption of raw in Lightroom. (683)

  1. why not import these files? LR4 can't just stand. CR2 a Canon 5DM 3?

  2. is there an easy way to go back and import all of these files from the disk? It seemed to have provided paths to all the files in the message, there are just too many files to cross. Is there a way to search for in LR? Fortunately, I have had very little, if any. CR2 files already in my catalog.

  Thanks in advance!

  In the import dialog box, right-click on that folder in the foreground and choose to include subfolders.

• Latest SLR RAW .cr2 file is not read?

  Hello

  I just got a new camera Canon 1300 D.

  I took all my photos in RAW format, and I imported these photos using my iMac SD card reader.

  I tried to update the Photos but no update is available.

  Photo shows all the thumbnails (while some are shot mistakenly by Photos), as soon as I double click on the photo to enlarge what this shows is '!'

  I managed to take some pictures where it piles up a RAW with a JPEG, Photos shows the JPEG version without problem. If I try can change and select the RAW format, it says that the RAW file is not supported.

  To read the other threads, I deleted the GROSS content inside the ' / System/Library/Core... "and re-downloaded the last one (6,19) and still no luck."

  I know that the camera is new, and I know the RAW photos handles photos that I imported the same a friends camera (canon 7 d I think). But I'm still an end to lose what to try next.

  Any help would be amazing.

  Thank you

  James

  The reason is simple, as you were told clearly

  It specifies that only the RAW file is not supported.

  Currently supported devices are listed here - Digital camera RAW formats supported by OS X El Capitan - Apple support - support RAW is not brand - it is a specific camera - your camera is not on the list and the 7 d is

  You can wait (usually communicated Apple Canon support quickly) or check out the Adobe RAW converter as a temporary work around if it has a support - and Canon provides RAW conversion software with their cameras that you can us until Apple support is available

  LN

• 5 d mark II raw (CR2) file is different from the 5 d CR2 file? Adobe Camera Raw error on mk II No 5 d

  I use the plugin Photoshop Camera Raw (Adobe) to preprocess the colors, and then complete the prepare image in Photoshop.  Never a problem with opening files CR2, usually from my own camera 5 d.  But a customer sent a few files CR2 which opens not (error says this is bad kind of document).  So far no explanation nor patches from users of Photoshop... thought I would ask experts to Canon.  Why file CR2 from the 5 d mk II fail but 5 d CR2 files all open ok?

  Still using Photoshop CS2 and the plugin Camera Raw is 3.7 v.  I really want to continue this workflow (works for me), prefer not to experiment with dpp or other opportunities.  Not ready to move yet to Photoshop CS6.

  No, CR2 (and all files camera RAW manufacturer) are modified somewhat for pretty much every version of the camera.  Similarly, manufacturers of software like adobe are always updated their software for the new models.  Your version of Adobe Camera Raw is extremely old, so that it can not read the 5 d 2 files.  And Adobe limited backward compatibility, so I don't know if you can load a sufficiently recent version to recognize the 5 d 2 files.  If you can't, then you're only choice would be to use the Adobe DNG Converter, convert batch files to DNG, the 5 d 2 then read those.

• Lightroom cc 2015,5 CR2 files suddenly not importers of SD or flash cards

  I've been using Lightroom cc for three months without problems.  Yesterday I tried to import pictures from my flash card and received the following message: "the following files were imported not because they could not be read."  I formatted the card, took more blows and tried again without success.  they import photos (aka iPhoto) very well.  Tried the same thing with my SD card and no luck.  Same message.  I just installed the latest update of Lightroom (2015.5) and still no luck.  Help, please.

  This message indicates the destination folder doesn't have WRITE permission.

  So here is the solution

  1. Determine the Destination folder (it's on the right side of the import dialog box under Destination)
  2. change the permissions on this EXACT issue in your operating system has the WRITE permission; OR change the destination folder in a folder that has WRITE permission

• CR2 files problem

  Elements 9 will open with my Canon EOS20D cr2 files but will not open the cr2 files created with my Canon EOS5D mark iii.  Error messages says it "cannot open because it's the incorrect file type."

  You need the current version updated to cab 7.3 items or you can convert the new CR2s in DNG camera with the new DNG 7.3 Converter: http://www.adobe.com/downloads/updates/

• Lightroom does not recognize cr2 files or any type of RAW files

  I ve used Lightroom for years to import and manage my - images raw and never had a problem until a few weeks ago. Now I can only import JPEG files to Lightroom. When I try to import files from other file types simply go gray and I can´t select them. Se the screenshot below, it is the case with all types of RAW files. I have a Canon 60 d and a Sony A5000.

  

  This is the culprit:

  

  and here:

  .

  Looking at all the images but allows only new import. Look at only the nine. LR is good enough to detect the photos that are in the database and do not need to import again. But you can do it by unchecking the mark near "will be important...". »

• Could not import the RAW A7R2 files in Lightroom

  Having just downloaded and installed Lightroom 6 I still can't import RAW files from my A7R2 to Lightroom even though he has apparently taken over?

  Hi oliverd,.

  Please update the Lightroom version, that is to say Lightroom 6.1.1 and you would be able to import the images in Lr.

  Please let us know if it helps.

  Kind regards.

  Tanuj Sandal

• Advise on the treatment of raw cr2 files

  Nice day!

  I'm new shooting from raw files and are in need of some good advice & counsel to treat you in Aperture.

  My camera canon 6 d, my version of opening is 3.6.

  I import my photos to the Aperture library with selection of predefined effect 'auto-enhance', some how when I load the individual photo to see, it seems to 'do' my pictures 'dark' as compare when I saw from my camera.

  I import my image to other raw by this time deselect the "settled", same thing happens when I see the photos in Aperture.

  My questions:

  1 is this normal for the treatment of the raw files? Which means I have to make a few exposure & contrast adjustment?

  2 or is there any tips that I can learn from your part in the treatment of raw with opening files?

  3. the pictures are perfect when I saw from my camera, however, it seems somehow bit 'out' when I load in Aperture.

  Thanks to advanced tips & advise sharing.

  See you soon!

  You have a raw treatment defined in the default settings panel for your camera? Choose a raw image and leave the default value