It can run multiple monitors affect T40 and t42
Hello
I was wondering if running a s-video rca cable using 2 monitors may adversely affect my ThinkPad t40 and t42. Because they both recently broken on me. Movies or television on their part running is all that I really use these computers. Could I have overheated or overclocked video card because they will turn on for a while then we'll fizzle out until his black or blue and the other just black after a few minutes. Could someone answer my question and tell me what I could do to fix?
Thanks, I appreciate your time
Well I did for awhile and it was OK.
Let flow TPFancontrol and check the CPU/GPU temperature.
Tags: ThinkPad Notebooks
Similar Questions
-
HP Envy h8 - 1520t - can handle multiple monitors?
I want to buy an additional monitor or two, but I don't know if my computer can handle them. According to the specifications of my computer, it has an AMD radeon hd gpu 8570. Is there any specific kind of connection vga, hdmi, dual-link dvi to run the installation of the multiple monitor? If yes what kind of adaptors/cables do I need?
It does not matter at all. Most video cards have only one of each type of connector. The key is to use the appropriate adapter if necessary. Furthermore, carefully follow the instructions in the guide.
-
You can run multiple instances of Windows Sidebar?
I use multiple monitors and I would like to use more than 1 instance of Windows Sidebar as aware, I have 2 pages worth of gadgets. and it would be easier to have a sidebar on each screen.
Hi IT_Shaggy,
It is not possible. If you have two monitors or more, you can place the sidebar on one of them
For more information, see the link:
Hope this information is helpful
-
I can run two monitors on a p2-1394 desktop with windows 8?
My wife recently started home work to do at home, and she asked me if we could run two monitors. I thought it was easier to ask first to go buy one and then knowledge I can not. Thank you!
Here are the specifications of your desktop HP p2-1394. Based on the specifications, it has a VGA output (analog) and DVI - D output (digital only). You should be able to use a digital DVI - D monitor and a VGA analog monitor at the same time.
(2) - DVI - D (digital only) (3) - VGA (analog only)
Please send Bravo
-
How many BGP sessions can run on 2 t 65009 and 4500 switches X?
Hi all
Can someone tell me how many BGP sessions can run on the following switches
65009 switch runs the supervisor 2 t, the version of the software "Cisco IOS Software, s2t54 (s2t54-IPSERVICESK9-M), Version 15.0 (1) SY6, VERSION of the SOFTWARE (fc4).
WS-C4500X-32 running the business license, software "Version 03.07.01.E VERSION SOFTWARE (fc3)"
Thank you
Neil
Hi Neil,
What you mean to BGP Sessions?
1. what a single BGP instance can run on any device.
2. to view BGP TCP session
'Display the tcp brief '.
Kind regards
Deepak Kumar
-
I have run several accounts based on the same server of my work account by e-mail. They all work very well except that if I received an email on my default account, and then try to send a response, the response is not sent and ends again in my Inbox. All other emails that I send from this account by default even normally go and are copied to my inbox sent according to normal. The problem is just with the emails that I am responding. I rechecked all of the parameters, but you can see nothing unusual. Any ideas would be greatly appreciated. Thank you
Check this box:
Tools > account settings > Copies and folders.do not select / deselect the box:
"place for answers in the folder of the message being replied to.Click OK to save the changes.
-
multiple monitors using miniDP and HDMI
I have a small question, I have 3 monitors (Acer and 2 DELL U2415).
Currently, I want to have a configuration as follows:
ACER-> MAC Pro via HDMI
Both my DELL-> Pro MAC with MiniDisplayPort
The only problem is, HDMI will work with a miniDP and the other monitor is not recognized and if disconnect the miniDP first then the second - the first and the second will work will not. Apparently he doesn't like HDMI 1 and 2 MiniDP.
Then I took my ACER and used the HDMI / MiniDP and plugged (essentially the 3 monitors are on MiniDP) it works fine. However, I think that the cable is not terrible because there are static in the image.
Can you guys please help me on how to set it up so that my acer still uses the HDMI and connects to the Mac Pro and the other 2 Dells use miniDP cables.
Thank you.
Make sure that you have all the monitors on the same bus Thunderbolt.
-
23tm multiple monitors affect opportunities
Me again!
After asking on this forum, I bought two monitors 23tm to broaden my Acer laptop, 571 in an almost office environment.
I use a Startech USB dock for additional video ports (USB3SDOCKHD) which gives me a DVI and HDMI output, allowing so different a signal for each monitor.
Extend the desktop (s) and hop I have three monitors individual 2xHP 23tm and 1 x laptop screen that I put as my "main screen" i.e. where appear office files.
As a result, the mouse from one screen to the other and all is well
except the touch capability...
gestures on the screens of 23tm is imitated on the "main menu", perhaps I should say pointed to the main screen. I drag a diagonal on the touchscreen and a shaded box appears on the main screen. In fact, nothing happens on the touch screen.
Question: where can I find the contact in place?
I think I got this:
- Type in "calibrate" the charm of research (Windows 8) to join the installation menu Windows touch screen system
- Your primary display must be a touchscreen (I think) things otherwise is confusing, or even NFG
With the foregoing, two monitors 23tm work outside a 571 Acer works very well.
As always YMMV
-
Is there a way to pass the video problem, and why it would run newer games better but not older.
Have run you it in compatibility mode - see here how:
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
Your graphics card is compatible with Windows 7 and if it's that you have installed the latest Windows 7 drivers for it?
If you post back, include the brand & model of your graphics card.
Before upgrading your operating system in the future, you should always check first that your hardware & software is supported.
As for why older games work but more recent ones, it simply technologies change & improve. To activate do this finally older software & hardware becomes obsolete. While I don't agree with everything they do, Microsoft provided Compatibility Mode Windows 7 to help with this problem and the XP Mode in Windows 7 Professional and ultimate versions.
All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.
-
How one thread can run multiple runnables?
Hi What follows is 1.6 api documentation
It should provide the Runnable when the thread is built himself, and once the thread ends the execution of its run the thread method is dead and cannot be started again as a thread.Executors.newSingleThreadExecutor() Creates an Executor that uses a single worker thread operating off an unbounded queue.
But the doc above indicates that a single worker thread is enough to execute Runnables queue. How it possible?Myriam wrote:
But the doc above indicates that a single worker thread is enough to execute Runnables queue. How it possible?Nothing prevents you from creating a Thread that has a list of Runnables and call its run() method one after the other.
new Thread(new Runnable() { public void run() { for(Runnable r : listOfRunnables) r.run(); } } }).start();
Threading tips base.
-
Title: Cancellation of the DESKTOP EXTENSION
I am wanting to "uncheck" the 'extend the desktop to this monitor "... It's 'grey '. How can I fix?
Hi Goldie01,
I understand that you are haivng problem with the connection of multiple monitors. I'll be happy to help you with this problem.(1) have you tried to connect the monitor directly on the CPU and check?(2) have you made changes on the computer before this problem?Method 1: I suggest you run the Microsoft FIXIT from the link and if it helps.Hardware devices do not work or are not detected in WindowsMethod 2: I also suggest you follow the steps to configure and change the display on multiple monitors of links and check if that helps.For reference:Method 3: Also, I suggest you to update the graphics card drivers and check if it helps.I hope it helps. If you have problems in the future, please let us know. We will be happy to help you. -
How to lock the desktop icons in a multiple monitor configuration
Original title: lock the desktop icons - and display
Working with Windows 7 Home Premium has a problem processing 2 pieces: no matter how many times I said I want the display screen appears on the monitor, the screen of the computer, every day he arbitrarily returns to the computer screen only. That creates the 2nd problem: the desktop icons that I have arranged for the largest monitor rearrange themselves to adapt to the computer screen. Is there a way I can lock the icons in this position that I used to be able to do? Or is it possible that I can keep the display to go back to the computer screen? (I'm careful to apply the instructions to display before the specified seconds elapse).
Hello
I suggest you to go through the steps mentioned in the link and the Coachman.
On a system running Microsoft Windows 7, the desktop icons can be moved to positions at random during another monitor main screen.
http://support.Microsoft.com/kb/2001334/
See also:
Move windows between multiple monitors
http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors
Work and play better with multiple monitors
http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors
Setting up dual monitor: two screens are better than one
-
Problems with multiple monitors for critical update Windows 7
Since the update critical October 1, I can no longer run multiple monitors.
According to the record, this update made changes at the same time the driver for my AMD Radeon 7470 and Dell monitor 1.1 card, and I've updated the software.
Devices for work and when I pass cables or remove cables. Yet they are simply not recognized as connected.
Hello Kent,
Thanks for posting your question on the Microsoft community.
Thank you for details on the issue.
This problem may occur because of corrupted or incorrect display settings.
I suggest you run the hardware and devices Troubleshooter and check.
Reference:
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-TroubleshooterPlease also read this article and check.
Work and play better with multiple monitors
http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitorsI hope this information helps.
Please let us know if you need more help.
Thank you
-
(Redirected) Multiple monitors on alienware alpha
Hi, is it possible to run multiple monitors on alienware alpha? I know there is only 1 hdmi plug out, but is there a way to split it and if so the gpu can deal with multiple monitors?
Better in this position in the Alienware owners Club Forum, here:
http://en.community.Dell.com/Owners-Club/Alienware/default.aspx
Bev.
-
Cannot run multiple firefox version 4 windows
The problem after the upgrade to FF4 began to occur. In ver 3 I used the Profile Manager and was able to run 2 windows firefox at the same time without any problems on Windows 7.
Now when I try to do this with version 4, a firefox window-error "firefox no longer works."
I thought that this was due to an incompatibility add on or something, so I made a withdrawal of the full program, rebooted, cleaned the registry and deleted all the files that firefox on my system. The problem persists.
You can run multiple version at the same time if the next version is started with the - no-remote switch added to the command line in the shortcut to the desktop.
'C:\Program Files\Mozilla Firefox XX\firefox.exe' - no-remote Pei
Maybe you are looking for
-
HP compaq dx7300 microtour format: I want to fix the registry file
I can't install windows because my registry file is that contains errors or missing including recovery dics should I use n where to download
-
All-in-one printer, HP OfficeJet 6210xi crippled
I installed my portable printer all-in-one OfficeJet 6210xi more than 4 years ago. Everything worked well. About two years ago, I replaced my PC with WinXP Pro's home computer. Everything worked well. A few months later, I bought my wife a printer wi
-
How to sort the rows according to the contents in cells
Hello Is it possible to use a formula to sort the rows according to their cell contents? I will include a screenshot of my table. What I want to do is group together people based on where they live. I wish that all rows with an 'x' in a certain State
-
Windows 8 and administrator privileges
I installed windows 8 on my Lenovo G560 but I don't have administrative privileges for some reason any. I tried the command net user Adminstartor/active: Yes , but still my local account doesn't have administrative privileges (I replaced the administ