It s all in gray

Similar Questions

• Photos all turned gray

  Recently, a lot of my photos are not appear correctly.

  Under photos, the thumbnail shows correctly.  However, when I click to see the picture it is all grey.  I tried to upload on my computer, and once again, the thumbnail shows correctly but eventually all the gray when I click to see.  If I try to message or email to someone, all gray as well.

  Is it possible to restore these photos? If anyone else has experienced this?

  Hello

  Go into settings, grayscale check Accessability should it be turned off.

  See you soon

  Brian

• Firefox 8 menu icons are all dark gray blobs, I can't read! How to bring back the old, bright look?

  I just upgraded to Firefox 8 and so far I hate it. The biggest problem is that all the icons are just dark gray blobs, that I can't read. I don't know which version I was running before, but the arrow to the left and the "home" button and all the rest were bright and clear and readable. Now, I can't even read what is in the address window.

  How to bring back the bright look?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

  Try another theme of Firefox (Tools > Modules > appearance/themes):

  • Firefox 3 theme for Firefox 4: https://addons.mozilla.org/firefox/addon/firefox-3-theme-for-firefox/

• request html report / all other gray line

  Hello
  I have this query in html report
  do you know how all the two gray ranks in the out could of the request.
  ??
  
  
  and where do I put it in the code below?
  
  
  
  Thanks in advance
  
  
  
  < name cfquery = "replace".
  DataSource = "#request. MainDSN #">"
  SELECT
  CompanyID,
  CompanyName,
  Address,
  City,
  State,
  Zip code
  Comments
  Of
  Company
  ORDER BY
  CompanyName ASC
  < / cfquery >
  
  < html >
  < head >
  ColdFusion MX Bible < /title > < title >
  < link rel = "stylesheet" href = "styles.css" >
  < / head >
  
  < body >
  
  List of companies < h1 > < / h1 >
  
  < TABLE width = 100% align = "left" border = '4' rules = "all" >
  < b >
  
  < td > < b > ID < /b > < table >
  < td > < b > name < /b > < table >
  < Td > < b > < /b > < table > address
  City of < td > < b > < /b > < table >
  < td > < b > status < /b > < table >
  < td > < b > ZIP Code < /b > < table >
  < td > < table >
  < /tr >
  < cfoutput query = "replace" >
  < b >
  
  < td > #CompanyID # < table >
  < td > #CompanyName # < table >
  < td > #Address # < table >
  < td > #City # < table >
  < td > #State # < table >
  < td > #ZipCode # < table >
  < td >
  < a href = "EmployeeList.cfm? CompanyID = #CompanyID #"> employees < /a >"
  < a href = "CompanyAddForm.cfm" > add < /a >
  < a href = "CompanyEditForm.cfm? CompanyID = #CompanyID #"> edit < /a >"
  < a href = "CompanyDeleteForm.cfm? CompanyID = #CompanyID #"> delete < /a >"
  < table >
  < /tr >
  < / cfoutput >
  < /table >
  
  < / body >
  < / html >
  

  Something like that?

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  ID	Name	Address	City	State	Zip code
  #CompanyID #.	#CompanyName #.	#Address #.	#City #.	#State #.	#ZipCode #.	Employees Add Edit Delete

  Phil

• I have a problem, all the gray towers photos when I open a document, I have a Mac computer, if that would be any help... Please can someone tell me what I am doing wrong. There have not been like that until I started now?

  I have a problem, all the photos of grey towers when I open a PDF document in acrobat xl pro, iy were not like this before starting a few days ago. Previously, he helped if I closed the program, but that no longer works?

  Try this: go to Edit - Preferences - Page Display and check the box that says "Show large images.

• File &gt; properties: all the gray fields / inaccessible

  I use Acrobat Pro 11. I want to change the properties of the document, but they are greyed out. What I am doing wrong?

  

  I see that the application that created the PDF file is FormsCentral, if the document has probably been activated drive. You can select: file > save a copy

  Open the new file to change things and then reactivate the file: file > save as other > Reader Extended PDF > activate tools more

• After download, box that says 'you have chosen to open' 'gray out' after selecting the button browse and full page is frozen / crashed. PC reboot needed.

  Hi Firefox
  After I finished downloading a file, see the Mozilla download page.
  I right click on the download to open it and the box "you have chosen to open" appears in the lower right of the screen with the "radio button", already selected for "open with...
  So far, all this is perfectly normal.
  However if I click on the "Browse" button to make a choice then the title at the top of the box, closing "Cross" and the "OK" button all gone gray and are unusable.
  In addition, all the page Firefox is frozen / crashed and cannot be closed.
  I have no other option but to reboot the PC.
  I tried various suggestions I found on your forums, including the removal of cookies, disable hardware acceleration, and I uninstalled and reinstalled Firefox 12.
  I looked at your "troubleshooting information" and it does not show a graphic driver problem. However, my driver is the latest driver nVidia for my GeForce FX5200 card and it worked fine with firefox 12.

  WebGL RendererBlocked for your version of the graphics driver. Try to update your driver graphics version 257.21 or newer.
  GPU accelerated Windows0. Blocked for your version of the graphics driver. Try to update your driver graphics version 257.21 or newer.

  Here are the specs of my computer:

  MSI K8N Neo motherboard (N1996 MS-7030 VER: 1),
  an AMD Athlon (tm) 64 processor 3200 + (Socket 754)
  3 GB of RAM.
  At present, it has a NVIDIA GeForce FX 5200 graphics card.
  The system runs Windows XP Professional 32-bit with SP3 and all the drivers are up to date.

  I have used Firefox for many years and not that another browser would never use!
  I did have a problem until now. I hope you can help me.

  Kind regards
  Chris

  Follow the suggestions mentioned in the following articles:

  • What to do if you are unable to download or save files
  • Firefox crashes or does not - how to fix

  Check and tell if its working.

• Badge of the App Store display available updates after updating all

  With the help of iPhone 4 with iOS 9.2.1

  After Update 9.2, then 9.2.1 I update applications download in iTunes and sync then peripheral.  9 app and iTunes updates show that they are copied and synchronized.  But the insignia of the App Store on iPhone still shows 9 available updates.  In the App Store, the 9 apps show as 'open', but 'install all' is grayed out.  I opened a few apps in the App Store or on the usual icon, and they seem to work ok.  I tried to restart and reset, but badge always shows a number.

  BTW, have also an old iPad and iPad Air now with 9.2.1 and this issue is not present.

  Hide the problem is to disable the badge icons in Notifications

  Or update directly with App store on the phone

• iMac has lost all sound. Not in the toolbar icon

  Sound not in the toolbar icon. All the gray options in system preferences. Help please?

  Reset the SMC and LANDAU according to the iMac Intel SCM and reset the PRAM

• Why active controls are grayed out?

  I have an array of Boolean controls that I've played with to see if I should turn the table or control.  Now, it seems that the table and control are active but gray (see fig. 1, Fig. 2: Fig. 1 shows the State of the table, Fig. 2 shows on the State of the control).  By clicking on each control in the table seems to "detoxify" them (Fig. 3), but which executes the code and then click on a control seem to turn all the gray (fig 4).  It is has no property nodes in my code that refer to "disabled" the matrix property or control.  There was, but I got rid of them, trying to understand why they are turning gray.  I mean, I'm turning grey, but that is to be expected.

  Any ideas?

  Thank you

  -Jamie

  It just means that the table is currently empty.

• C6280 All in with Mac OS x can not copy or scan

  I can't copy or scan. on my 6280 C all in one.  I use Mac OS x 10.7. It worked, but now all I get is a sheet with all the gray-black ink which resembles what happens if you leave the cover upward. This seems printed on or in the preview copy and scan on the copying and scanning previews - scans show a test of color along the edge.  I can print from my computer.

  I tried most of these steps.  Because it would not copy or scan it look like lamp or sensor was out. So I got a new all-in-one HP at Costco.  To still get advice ho to replace light would cost $25 at HP as it was not under warranty, as well as any necessary parts.  New one is $99.

  Thank you very much! PROBLEM SOLVED.  It's really cool to have this forum available! BRAVO!

• Threshold of abandoned gray pixels

  I use the threshold tool to create a template. First of all, I used the quick selection tool to cut objects I wanted to and then tried to use the threshold tool to create a unique image of black and white.

  However, for some reason, particularly on the edges of the objects, the threshold tool left a few gray marks, instead of black and white.

  Does anyone know why this is and how I can fix this problem?

  I tried to use the threshold tool once again, but not all the gray dots were removed

  Threshold will be made pure black and white pixels, but some pixels will be semi transparent because the fast selection made a soft edge.

  Make the layer > layer mask > transparency ' threshold and then apply the mask to give it a hard edge, too.

• What is black and white and gray everywhere?

  I'm becoming an expert pre-press after an embarrassing error on a job that I sent to print last spring. All uppercase gray, lines and text boxes in the unable to print 12 pages newsletter. Bottom line, I sent the work to this printer from budget without conversion of RGB to CMYK, because she had been asked by the printer for the previous question.  The printer ate reprint costs about 200 information bulletins (probably because they felt they shared the responsibility for the error).  It is clear that I can't count on the directives of this printer.

  The other thing you need to know is I am Freelancer, an American working in Germany and I have no direct communication with the printer - the customer is the intermediary. I use Adobe Indesign CS4 version 6.0.6, on a MacbookPro OS x 10.6.8.  The next issue of the newsletter is now coming my way.

  The 12-page booklet is printed as follows:

  front and back cover on coated stock in 4 colours,

  inside front and back cover on coated stock in b & W,.

  and interiors 8 pages in b & W in uncoated stock.

  He had no problem printing of the previous edition, apart from the poor quality B & W photos and elements in grayscale in the inside pages. The only difference in the way I presented the second job was that I "converted" photos using layer effects in the appearance B & W, so I could better visualize how they would convert to grayscale (they stayed in the RGB color space).

  All I can conclude is that when the printer saw the photos n & B, he assumed that I had in fact everything in the inside pages converted to grayscale and therefore does not check the presence of the RGB color space. The gray text box and line items that were in RGB transformed to match the amounts of CMY, which translates to white and left the plate! I should have known that he was a risk, but I did not.

  Help me, if you understand what good practices will avoid such a mistake in the future. I have now read a lot of good resources on pre press, and I think now, I understand, but need to be reassured that I am on the right track.

  The newsletter will be printed, but will also be linked to a website for viewing online as well as distributed in a version as an attachment to e-mail low-resolution. So, I try to understand what should be my workflow.

  I should work in a RGB workflow until the client approves the work, then exit (a) using the PDF standard for offset printing CMYK to generate version to send to the printer. (b) then output another file using the PDF standard for the Web. and finally another using "smallest file size" for the distribution of electronic mail?

  In other words, if none of the color conversions must be made in native Photoshop files in InDesign, or rather they should occur during the conversion from PDF using an appropriate standard? Or do I convert in Photoshop images to use in the inside pages to grayscale images and all images to use on the front and back cover to CMYK before creating the PDF file?  This, of course, would require not make two sets of images, one for the print version and the other for display on the Web.

  Should I work with vector images and type in CMYK from the outset and keep my palette strictly in CMYK mode? Or should I work entirely in RGB and allow them to be converted to grayscale via PDF conversion?

  There is the related question of the help of the two coated vs uncoated, stock that the client wants to reduce costs. The black and white inside pages in uncoated stock gave less satisfactory results in the first two ballots. Despite my efforts to improve and clarify the pictures in Photoshop, most of the printed values much darker and less strong than the photos on the coating. The two-tone gray in the banner (vector) values have been radically different when seen by side on pages 2 and 3 and on pages 10 and 11.

  You can produce a PDF that has two modes of different output - coated stock for pages 1, 2, 11 and 12; and no coated stock for 3 to 10 pages?  This would solve the problem, or is there something more I should do with "Dot Gain" in my prepress that would solve this problem?

  Here are a few assumptions I've done so far, after gleaning information from various sources:

  1. I have put my Adobe Bridge color definition of Europe General Purpose 2 preferences for screen and print.
  2. I guess I should use a RGB workflow up to the last moment before being submitted to the printer (to maintain flexibility and activate the exit for muliple purposes, for example, print and Web versious).
  3. I should check the printer which PDF standard is compatible with its RIP and gives him more flexibility to make adjustments for its RIP so we get the best printing results.
  4. Should I choose a profile to control upstream, such as the VIGC Live Preflight profiles (Ghent PDF Workgroup) to identify any potential problems of conformity with space color, transparency, text in excess, bad fonts, cropping, etc. before conversion to PDF.

  Any advice you could offer would be appreciated.

  Hi Peter, my biggest frustration is I can't communicate with the printer - there is remote, no time to talk with clients and speaks German. All I can think to do is inform how professionally prepare the files, and then write (and translated) a note describing what I did as well as possible. At least I will have done my "due diligence" and if there are problems with the work, the responsibility will be on him, if he didn't read the memo, or ask me to fix everything that does not work for its workflow. I will be certainly work in two files, one for one (K only) for uncoated and coated.

  Peter Spier says:

  Said what Rob is OK, but I think in this case, given that the work, I think, goes on press and print on two different stocks, would probably prepare files for color on coated stock and the K-only on non-coated, but ask to the printer. Questions about the way they really want to receive your material to address them.

• display iPad problem

  Files for "cutting" in bottom of screen background photo. Now, they are all solid gray.  Is there a display setting that I forgot?

  Try these general steps. They could help.

  1 reset your iPhone by pressing and holding the sleep/wake and home buttons.

  2 disconnect you from your iCloud account and reconnect again.

• Next button disappears on the homepage

  I asked this without result. If you use firefox, I can search, access a page, go to deep pages, click on the "back" button and forward button; but when I click on the button to return to the home page, the forward button disappears. I did by accident or by design many times. When I back up on the homepage, I have all over again, repeat the search, and it's extremely frustrating.
  It is NOT fixed by the "default restoration."
  It seems that if I return to my home page [generally Google Search] then Firefox guess I won't want to go forward again.
  I don't want an another add-on for it. I just want the next button in all the windows where there is one page forward.
  How can I get that?
  I hate to say it, but it happens enough that I use Chrome for research and just general surfing.
  In my opinion, the show button before being in all windows, grayed out if necessary, but there. But I can accept it endangered when there is NO front page. But not when there is a page to the front.
  Note: this NEVER happens in Chrome [and others.]
  See the photos
  1. Google search
  2. search for Yellowstone
  3. go to the Yellowstone site
  4. click the button back to search page of Yellowstone.
  5. click on back to the Google page.
  Where is the button to the front so that I can move forward looking for Yellowstone?

  Thanks for the follow-up, but to test, I cleaned the machine and new load of Mozilla. It always does the same thing.
  I will consider your reference to follow-up, however.
  ....................................
  Later:
  Yes, my home page was listed as https://www.google.com. But I deleted that and changed. Then deleted that and it changed to https://www.google.com. And now it seems to work. He could have this cache that does not clear properly.
  A note the same thing happened when I changed the homepage to https://192.168.1.20 www.bing.com. But after I deleted and it reinstated, Bing now works properly in the home page. [Although I've switched back to google].
  I have no idea why I have to enter the homepage, save, delete and tenant to operate correctly.
  ............................
  But your comment made me try things, so thank you.
  Don