It's October 23 and Muse crashes again, the first time to use it

Similar Questions

• When you get a retailer to re - install Vista are you able to burn a copy of Vista as when he was the first new and turned on for the first time?

  Hello and Merry Christmas to all. Sorry its been a while that I had time to be on the forum, (family illness) Anywho my daughter had dropped her Lenovo and although we went through every conceiveable options to retrieve and detaches from the dreaded "black screen" we couldn't. We had the chance to recover his files before he died forever! That was the good part... I had to resume at Tiger Direct, where they installed a new concert 320 H/D and re-installed Vista. Because she graduated she had two of the residence and turned my basement into a hoarders paradise, lol point being that she has no idea where his original disk is so I contacted Lenovo who assured me that they would send me a copy of Vista (how naïve of me) they me sent recovery disc (two games not less and it took more than a month!) that I discovered after the fact that I could have burned my own through Neo-Smart...

  There is one thing that still bothers me and that's when we first pulled his new Lap Top for the first time and installed Vista I remembered that the very last paragraph said to make your own copy of the o/s before your done... what was not done! Is it still possible to make a copy of its operating system now? If Yes, how would go about this, if I wait for her to do it, it will not! She was lucky that I was able to use a slave to its hard disk of my XP Sata-IDE cable and get its files on the drive before it me locked. It has an external H/D as most of the people who do not know how to change their scores on the top of their Tower and get the full use out of them as desk top users do.

  As aways thanks for the fellow forumer for your time and trouble and any help is appreciated.

  Tiggerer

  Hello and Merry Christmas to all. Sorry its been a while that I had time to be on the forum, (family illness) Anywho my daughter had dropped her Lenovo and although we went through every conceiveable options to retrieve and detaches from the dreaded "black screen" we couldn't. We had the chance to recover his files before he died forever! That was the good part... I had to resume at Tiger Direct, where they installed a new concert 320 H/D and re-installed Vista. Because she graduated she had two of the residence and turned my basement into a hoarders paradise, lol point being that she has no idea where his original disk is so I contacted Lenovo who assured me that they would send me a copy of Vista (how naïve of me) they me sent recovery disc (two games not less and it took more than a month!) that I discovered after the fact that I could have burned my own through Neo-Smart...

  There is one thing that still bothers me and that's when we first pulled his new Lap Top for the first time and installed Vista I remembered that the very last paragraph said to make your own copy of the o/s before your done... what was not done! Is it still possible to make a copy of its operating system now? If Yes, how would go about this, if I wait for her to do it, it will not! She was lucky that I was able to use a slave to its hard disk of my XP Sata-IDE cable and get its files on the drive before it me locked. It has an external H/D as most of the people who do not know how to change their scores on the top of their Tower and get the full use out of them as desk top users do.

  As aways thanks for the fellow forumer for your time and trouble and any help is appreciated.

  Tiggerer

  Hey tiggerer

  NeoSmart is software startup repair not a recovery disk to reinstall vista

  and once you have replaced your hard disk you have lost the ability to do the recovery disk from the recovery partition that may have been defective hard disk

  and it depends on your version of vista as to whether you can now make a backup complete pc using microsoft software

  you need vista business or vista ultimate to backup full pc

  read information from microsoft about it at the link below microsoft

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

  If you have not these versions vista expect from lenovo recovery disks be delivered or buy a third party program to do a full backup pc

  one of these programs is the true picture in the link below

  http://www.Acronis.com/

  have a happy holiday season

  Walter, the time zone traveller

• Can anyone advise me on the conversion and submitting CMYK for the first time?   (In a language that is slow and easy to please)

  There is more discussion on this subject (and opinions) that Carter has pills and I have read many of them... but I'm still confused and since I was less than 7 hours to solve this problem, I'm crying out for more help.

  1... I know that I need more to learn about this... but that does nothing my period

  2nd... This is a simple corporate Head-shot that is produced in a print magazine with an article written by my client.

  3rd... The Publisher asked for the photo to be in CMYK mode and since this editor is in the USA, my assumption at this late date is that the standard CMYK color profile - U.S. Web Coated (SWOP) v2 produced by Photoshop is enough.

  I can be on the right track now, but I'm completely side stepping of Lightroom for all editing and staying in Photoshop in Adobe RGB (1998)

  At this time, when I click on view and choose a PROOF, CMYK is selected.  I don't know if it's accurate, or if the selection is premature.

  I plan to complete my edits in PS and then click on IMAGE, click MODE and choose CMYK.           Currently, for my editing process, it is set to RGB

  Hopefully save them as CMYK will be available after changing the MODE, but my save as feature currently available, available only ADOBE RGB (1998).  Also save a copy and a box to include diapers or not.

  Yesterday, when working on this folder, I clicked on the EVIDENCE and CMYK, but I didn't see any difference in the editing...  It maybe because I exported a ProPhoto since Lightroom file as a basis to begin by... I'm not sure, though.

  My concern is as follows... yesterday, I have saved in a CMYK file and it looked fine on my monitor.  I sent it to the customer (I chose the JPG extension) and when she had, the colors were OFF.  She sent the files back to me, and they were indeed average off...  He told me that it was not a matter of calibration of monitor between his PC and mine.   Which brings me to the last question... my monitor is calibrated "to eye" to a company of printer that I use for my regular photography - which worked great!    And unfortunately, at this late date, I can't get a profile of the printer of the editor.

  Thanks for reading all of this... I wonder if my current game plan is sufficient for this late hour...

  No Lightroom

  Edit in Photoshop in ADOBE RGB (1998)

  Keep selection 'PROOF' in CMYK, so that I have change

  At the end of my edit, click MODE and change to CMYK

  Save the file with CMYK to jpg.   (all other types of files are too big for the customer to manage e-mail)

  Am I missing something?

  There are a number of potential problems here, and it may not be at your end.

  First of all, it should be clear that CMYK is not so much a generic "image mode" because it is a description of the specific press conditions. If you produce final CMYK, you need to have the right profile. Do not use Image > Mode, use Convert to Profile.

  Given that, I wonder anyone who does not accept the Adobe RGB photographs for a magazine article, because it involves a process that doesn't is not correctly color generally not up to date and not managed. A typical workflow would today use InDesign, where images are usually placed in their original space of RGB whatever that is. Then the final conversion output CMYK is made as the last step, when you generate a ready PDF to InDesign.

  It helps if you know the final CMYK, because then you can the evidence for that so your file survives the CMYK conversion with the least possible damage (we're talking range cut here, not general color moves). But it is not absolutely necessary, that is why this workflow is relaitively safe.

  Thirdly, CMYK jpeg is itself risky, because several decoders of jpeg (in some software) is not a proper CMYK support. The result can be weird colors. This could well be the problem here, because it sounds as if your customer uses a non-standard workflow.

  So what to do? I would send two files. A sRGB as a reference, which is guaranteed to come out correctly. Then find a way to send TIFF to CMYK version if they insist, or ask them to try to open it in different software. Of course , you should have a calibrated and profiled monitor, but I agree this is probably not the immediate problem here. There is no particular reason that a CMYK file should return to the colors twisted if he opened and processed in color management software correctly.

• Mouse and UI Lag, be ground immediately after turning on the computer for the first time.

  Hello

  I started using Windows 7 yesterday for the first time after using Windows XP since its release.  A couple of things, first off I noticed lag and be ground everywhere instead travel windows autour mouse, move the mouse on the screen, etc.  It will just freeze and jump around, is not no good whatsoever.  I have a wireless optical mouse Logitech, maybe this has something to do with it, because I tried to install the software for the mouse, and I got a weird error and something not to be in the right place (very annoying).  Nobody knows why, I'll have this lag?  It's really annoying and never happened in Windows XP.  Any ideas on how to possibly resolve this problem?  Thank you very much.

  Justin

  Programmer for Sony Online Entertainment.

  Try to use another mouse, or by downloading the new firmware drivers/mouse from Logitech for your current mouse.  Have you noticed the behavior if you start in safe mode?  Or if you perform a clean boot?

• Another that holding down the power button, then by restarting, how should I manage my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Another holding down the power button, then by restarting, how should I handle turn on my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Combinations of keys start for Mac - Apple Support

• Music player "Shuffle all" don't work the first time, you must go back and tap it again every time that the application starts, what gives?

  On the Open of ZTE, the music player "Shuffle all" failed the first time, pressed, instead, it will just load a song at random and read the rest of the list in the order; It's not until I click "Shuffle all" and back again it will play in fact mixed. Is this a bug? All solutions?

  Hello

  Yes, I think that it is a known bug in Firefox OS v1.0. Bug 883781.

  The bug is marked as resolved in Firefox OS v1.1. Once that ZTE full update to version 1.1 the bug on your device.

  version 1.1 of Firefox OS was officially released yesterday. If all goes well, it won't be too long before it reaches the Open of ZTE. See here for more details:

  Update OS of Firefox (1.1)

  I hope this helps.

• the two versions of Muse (2015.0 and 2015.1) at the same time

  Hello dear Musers,

  Is it possible to install both versions (2015.0 AND 2015.1) at the same time?

  I manage several sites and I want to be able to update regularly (stable and bug release 2015.0) while slowly, tests and moving them to reagent (2015.1)? Also to start playing with the possibilities of delicate design in Muse.

  I also have a site with complex effects of scrolling that should stay that way. I can't run the risk of not working after the update... at least I have a replacement with Animations of EDGE...

  Thanks for the help.

  J. Vallejo

  If you an active member of Muse and can accept the terms of the non-disclosure agreement, my recommendation would be to join the beta program of Muse at http://museprerelease.com. At the moment the latest preliminary 2015.1 is always displayed and it is basically identical to the retail version, but with a splash screen different. In general, it is deleted shortly after the production version is released, but has not yet happened.

  The preliminary version installs the construction of shipping along the coast. The two have no overlap, other than the fact by double clicking a .muse file is a bit of a gamble in terms of what version of Muse, the operating system decides to launch.

• I've updated my billing for new card c, I have my paid October Bill and I always get the message (only 30 days).

  I've updated my billing for new card c, I have my paid October Bill and I always get the message (only 30 days).

  Hello

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• After Effects - Download for the first time and keeps crashing

  Hello! I bought my CC plan earlier and download after effects CC with the hope to apply the blur filter of Pixel movement in a project. The problem is, since the first time I opened the app, it crashes a lot. I can't use any filter it crashes, so I try to make something, it crashes if I keep for a long time in the application, it crashes. I don't know what can do and I'm a bit desperate. Know you guys something I can do? Thank you very much!

  MacBook Pro (13-inch, mid-2012)

  2.9 GHz Intel Core i7

  8 GB 1600 MHz DDR3

  Intel HD Graphics 4000 1024 MB

  

  According to the crash message, check your Quicktime and Audio settings in the respective system control panel.

  Mylenium

• 36.0.1 under Windows 7 Firefox crashes on the first click, can't kill processes

  After the 36.0.1 on a Windows 7 computer, Firefox crashes after the first click on a link or when you try to open a new tab. I can't kill the process from the Task Manager. Need to reboot to get rid of the process.

  My attempts to solve the problem so far:
  Uninstalled Firefox & my anti-virus program, removed Mozilla dirs Program Files and AppData and cleaned the registry. Then reinstalled Firefox after the restart, still hangs on the first click on a link. Even impossible to kill the process, help to only to restart.

  I tried on another Windows user; does not help. Still the same symptoms.

  PS: Related to this thread: http://support.mozilla.org/en-US/questions/1051108

  Thank you for your support. Given the quick succession of versions of Firefox, I just waited out 37. My problem is over now.

• Satellite L500-19 X starts and loads Win 7 always like the first time

  OK, so I bought a toshiba satellite L500 - 19 X to the United Kingdom in a store called carphone warehouse.
  It came with windows 7 pre-installed.
  I wanted the 32-bit version, so he ran faster, but he had installed 64, but came with a 32-bit restore disc.

  So I went ahead and restored, now, whenever my laptop starts up, it think it's the first time and load the toshiba implemented and stats to do things then restarts.
  He could do this all day until I hit escape and complete the configuration manually.

  No one knows how to stop this or I have to buy a full version of windows 7 and start again in this way?

  Please please answer now! Thanks in advance guys :)

  Thanks for this info!

• upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  Try to repair the security permissions for iTunes for Windows and the empty/corrupted after upgrade/crash iTunes library.

  TT2

• charge battery for the first time and the best practices for maintaining the life of the new PC laptop battery

  Received my first laptop as a gift today (Pavilion touchsmart 15-n287cl).  You need to know 1.  How long to charge it for the first time or first several times; 2 do you need to unload and reload between each use completely and how long should it take to charge an average before being used again.  3. Since no instructions is a good idea to leave it plugged when you use all the time or the battery should be removed to improve the conservation of life?

  Thank you in advance, it has taken a lot of time to migrate from the desktop.  Want it to be a positive experience.

  Hello

  Modern batteries and chargers are now smarter than you.

  1. you can plugin and immediately to use the machine, the machine will stop charge when the battery is fully charged.

  2. No, we don't need to unload completely between uses, then as above. The recommendation is sometimes we run machine on battery until that up to 10%.

  3. when using AC is a way to protect the unit during the failure of current, all of a sudden, leaving battery on laptop.

  Please read the following article:

  http://BatteryUniversity.com/learn/article/how_to_prolong_lithium_based_batteries

  Kind regards.

• Everytime I open Photoshop CS2, it starts as if it were the first time.  All the settings are default and it asks me to register even though I already have.  How do I save my settings and keep his memory?

  Everytime I open Photoshop CS2, it starts as if it were the first time.  All the settings are default and it asks me to register even though I already have.  How do I save my settings and keep his memory?

  Right-click on the exe to PS file and choose Run as administrator. I think you choose the option "check mail", it will not ask again.

• If I cancel my monthly subscription and re register later, are my files that I created the first time still saved?

  If I cancel my monthly subscription and re register later, are my files that I created the first time still saved? Or did my account from scratch?

  Always save your files on your hard drive or server that you have access to. You control where files are saved. They will be there is you cancel your subscription, and they will be there when you register again.