It seems to be an unknown device in my printers/device program that I can't uninstall and appears to remote controlled... How can I remove it?

Similar Questions

• Unknown device on network adapter between the laptop and the wireless router

  I am running windows 7 64 bit on a laptop computer connected wireless to the router and internet.  The router is Linksys WRT160N connected to the internet.  The map of the network, there is a question mark device unknown between the laptop and the router.  However, I still have access to the internet.  In terms of network, if I hover over the laptop, it does not show an IP address.  It only shows the name of the computer and its MAC address.  Any help would be appreciated.

  Solved my problem.  I checked the button of the IPv6 protocol in the properties of a network connection on the laptop, and now I can see it's the IP address and the unknown device has been replaced by a switch and hub which is part of the router.   I do not uncheck the button IPV4.  I'm guessing that it is a bug in Windows 7 that you need to cut of ipV6 Protocol when you have a Win XP computer on the network if you want to see a map of own network.  As I said before, everything worked before, so this seems to be a cosmetic fix only.  I see that my shared files on the XP computer appear faster after a reboot.

• Unknown device after that Windows 8 is installed in my notebook

  I have laptop dv6 - 6B 20.

  I have a problem when I saw my device manager have an exclamation point on other devices.

  It is said that UNKNOWN DEVICE. He have a solution to this problem? I have a hardware ID.

  ACPI\VEN_HPQ & DEV_0004
  ACPI\HPQ0004
  * HPQ0004
  Please help me I hope you can solve this problem.

  Please try the following driver:

  http://ftp.HP.com/pub/SoftPaq/sp61001-61500/sp61037.exe

• I deleted Firefox but it seems that there is always, in fact, I use it now, how do I remove it?

  How can I remove a Firefox I can't but you can use?

  I think I solved it, none here seemed to be 3 instances of Firefox on the computer, I think that it could have been my problem with Shockwave, will check later... I had a shortcut and looked at the properties of the target, when I open the containing folder, there were 2 several instances of Explorer, which don't want to uninstall so I just deleted them... I now run the 22 Version as my Norton Toolbar works with her...

• How can I add camera Canon devices so that I can import pictures

  How can I add my Canon camera so that I can import pictures on my laptop?

  Camera pluged in laptop but nothing don't get past-Whre I get "import pictures".

  If you are using a USB connection, plug everything etc and then turn on the camera. W7 will identify it, then you can use Windows Explorer for eyebrows to your photo on the camera folder. Copy and paste pictures on your hard drive.

  Also, try reading the manual!

  See you soon,.
  Jerry

• Satellite Pro L670 - 18F PSK3FE Webcam works become "unknown device".

  The * webcam * on my * Satellite Pro L670 - 18F PSK3FE * who is running * Windows 7 64 - Bit * a well worked until this week. My notifications bar started to say * "unknown USB device" * and when when I went to use the webcam it no longer worked.

  When I disabled the webcam in the BIOS the notification has stopped, but when I turned it on the notification came back again to the top. The unknown device is clearly the webcam.

  I updated my BIOS and tried the system restore.

  I also downloaded the driver for the webcam of http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK and have tried running that - + but it NEVER seems to complete the installation. + I have will continue to try to reload the driver and see if that helps, but from now on, I do not think that the pilot will help.

  If it is just a driver problem, someone could suggest how to get the driver to install really :-(

  I am now at a loss. I'm not sure what to do now. Suggestions?... + Please! +

  Hello

  Unknown device means that the driver is not installed.
  I think that the installation of the webcam driver should fix it.

  As face recognition also use the webcam, I recommend you to uninstall this tool as well as the older version of the software of the webcam.
  Both (or just face recognition) should appear in Control Panel-> software

  Now download both applications to the driver page.
  Start with the installation of the webcam driver:
  (1) unpack the webcam driver package

  (2) the TC30049700N.exe may also be decompressed (right click-> extract here)

  (3) now you should see different files exe, dll, and others attempt to run setup.exe to start the installation. If this does not work, go to Device Manager, mark (webcam) unknown USB device and install the driver pointing to the folder that contains the files of webcam driver. The system should automatically recover dll files.

  (4) restart the laptop and follow with face recognition software.

  Good luck

• Satellite A500-138 'unknown device' in Windows 7

  Hi all

  I am the owner of a Satellite A500-138 - Part Number: PSAM3E - 013014H 2.
  I just finished the upgrade of the o/s from the horrible vista to Windows 7 Ultimate 64. Update was smooth. Drivers and utilities were easily on your website and install it correctly. Almost everything seems to beworking OK...
  I find myself with 2 numbers:

  1. the watch still an "unknown device" Device Manager
  Details of the device shows hardware IDs of ACPI/ENE0200 and * ENE0200
  What is this and where can I find the driver?

  2. I can't find the Manager of LAN/WLAN cool utility that came with vista.

  Thanks in advance,

  Friend

  Hi friend,

  Have you checked the device ID and the unknown device provider? You can check in the properties of the device.
  Maybe it s Bluetooth adapter if your laptop is equipped with such a

  Regarding the WLAN tool, I think you mean ConfigFree. You can download it on the Toshiba site. Maybe the version of Vista also works on Windows 7.

  Good luck! :)

• Satellite A660-10W - after Windows 7 installation of unknown devices

  So I have the Satellite A660-10W, and I reinstalled Windows 7 it came with Windows 7 ultimate 64-bit. First thing, it's when I use fn + F6/F7 (other combinations work) to the brightness levels, it does not work, brightness does not change. And the other thing is that there seems to be some unknown devices.

  This is all hope someone can think of what could it be, thanks in advance. :)
  Link: [http://store.picbg.net/pubpic/B4/3E/3ca598fbde5fb43e.png]

  You should try to install: Bluetooth, infrared, Modem drivers...

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  In any case, it will be better if you post the id of the device / vendor:

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

• B50 30 unknown device driver

  I want to know where I can get a driver for the unknown device on my Lenovo G50 30. He appears in as Device Manager with no driver loaded at all, but I can't seem to find a driver on the net for this device.

  Anyone else had this problem or knows where to find this driver. ?

  Thank you

  Nigel

  I searched through the forums to find out what were these device, Card reader and Lenovo power management and then download the drivers from the lenovo site.

  Seems to have solved the problem

  Nigel

• Unknown device in USB controllers

  VAIO VPCEB26FX

  I'll send along a screen shoot.

  I have upgraded from Windows 7 to windows 8

  Downtown usb falls down all the time, seems to be the unknown device.

  I uninstalled an installed the Sony chipset driver, makes no difference.

  Thank you

  

  llshamess,

  The SNY5001 usually refers to the Sony Firmware Driver , but unfortunately there is no support driver for Windows 8 for this unit on esupport.

• Satellite M50D - A - 10 L - pilot missing for unknown device

  You just bought a Satellite M50D - A - 10 L and after 1 week, the HARD drive failed. Of course, I had to replace on my spending, because the guarantee would be in about 2 weeks, which was too long to wait for me.
  In any case, I also lost the pre-installed Windows 8.1, but is not a tragedy, because I reinstalled it and everything works well.
  The problem I have I have one of the pilots is not recognized by the "Device Manager". The device is called 'Device ACPI'. Any idea which driver missing is all about?
  Thanks in advance for your answers.

  PS: Do not know how to attach a screenshot of "Device Manager" with missing driver...

  Have you tried to identify the unknown device, through the identification of the seller and device?
  http://www.PCIDatabase.com/

• Satellite C660-12V and WXP - unknown device

  Hi all

  I've just intsalled WinXP on Satellite C660 - 12V PSC0SE. I installed all the drivers already, but still I have a problem with a single element:
  ACPI\TOS6205\5 & 2730DB79 & 0
  What is it? I can't find the drivers.
  It's new C660 without operating system

  Help, please

  Use http://www.pcidatabase.com/index.php for the identification of unknown device

  TOS6205 implement provider search option and you will know which device needs to be installed.
  If you need further assistance please let us know.

• Satellite U500-115 - unknown devices after the Installation of Win XP

  Hello

  I just installed Windows XP on a Satellite U500 - 115 (PSU5EE) and cannot get rid of several unknown devices in Device Manager.

  Before to install the operating system, I changed settings AHCI in the BIOS to Compatibility-Mode (IDE), so I don't need to inject the SATA driver during installation.

  These are the unknown devices:

  ACPI\PNP0C32\1 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\2 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\3 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\4 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\TOS6205\2 & DABA3FF & 0 (location: System compatible ACPI Microsoft)

  Of course, I installed driver chipset and graphics driver from the toshiba download page, but the unknown devices are still there! Can you please tell me what kind of driver I need to install ACPI devices - and get rid of these unknown devices?

  Thanks in advance,
  Hans

  Hello

  In my opinion the unknown devices belongs to the SATA interface controller and these appear as unknown device because you have installed the XP compatible mode.

  Try to install the Intel Storage Manager driver.

  ACPI\TOS6205 device can be a Bluetooth device.
  You must install the battery Bluetooth to get rid of unknown device.

  welcome them

• Unknown device Hardware ID SMCF010

  Hello...

  Have a HP Compaq NC6120 laptop.
  

  1.6 MHz 2 GB of ram. 60GB HD.
  

   

  Running XP - PRO. Do a clean install of Windows-7-PRO-32 Bit.
  

  Thanks to this forum, I have everything except a problem solved.
  

   

  In Device Manager, I have another unknown device of devices (1).
  

   

  I ran the unknown devices program UKD & he grew up this info...
  

  
  Hardware ID - SMCF010
  

  Category (class) - other devices.
  

  Enumerator - ACPI
  

  Status of device flags - unknown, present, undetected, only not ghost, visible Catagory.
  

   

  Googled it without much luck.
  

   

  Help, any ideas or suggestions would be very appreciated.
  

   

  Thank you... ........ Chuck
  

   

  I hope it's on the good card...
  

   

  Hi, Chuck:

  Be connected to the internet.

  Go to Device Manager and right click on the device of SMCF010 who need drivers.

  Click on update driver driver.

  Select the method of automatic update and the update of Windows should find the infrared driver, download and install it.

  You also have a graphics driver issue...

  This is to install the graphics...

  Download and run the following driver.  You will probably get an error not supported operating system.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=447347&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_47264_1%257CswEnvOID%253D2094%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Conclusion of any windows error.

  Go to Device Manager. Click to expand the category graphics cards. Click on the VGA Standard card.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software, and then navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp34749.

  Make sure that the include subfolders is selected and the driver should install this way.

  Once you reboot, you should have decent graphics, but not Aero as the graphics card Intel in this model is not completely windows 7 capable.

• T420s Windows 8 Unknown device

  I installed Windows 8 x 64 recently and installed all the drivers. I was pretty sure that all devices have been installed.

  I had a problem of power management of hardware before installing Windows 8 I was hoping was a software problem that reinstalling the OS would be in trouble. Turns out was not software, he had the main Board replaced under warranty. Even after the replacement of the main map, I was still enough course that I have seen that all device drivers have been installed in the Device Manager.

  But today, I notice an "unknown device" listed that does not have a driver installed. I often know it can be the TPM module or any other system device, but I have the TPM installed the chipset software driver and management authority. But there's always that unknown device.

  The only clue I have, as to what might be the device is under details, the "Hardware ID" property value is "root\sscbfs_storlib_bus3". A Google search brings nothing to this string. 'STORLIB' shows like it has something to do with storage, but I have the Intel RST driver (11,7 Intel) as well as to install the card reader driver. I can confirm that the card reader works fine too.

  What else could be this unknown device?

  I never understand what it is. But I uninstalled (not sure how you can uninstall it when it is not already installed) and it showed no upward again.