Unknown device Hardware ID SMCF010

Hello...

Have a HP Compaq NC6120 laptop.

1.6 MHz 2 GB of ram. 60GB HD.

 

Running XP - PRO. Do a clean install of Windows-7-PRO-32 Bit.

Thanks to this forum, I have everything except a problem solved.

 

In Device Manager, I have another unknown device of devices (1).

 

I ran the unknown devices program UKD & he grew up this info...


Hardware ID - SMCF010

Category (class) - other devices.

Enumerator - ACPI

Status of device flags - unknown, present, undetected, only not ghost, visible Catagory.

 

Googled it without much luck.

 

Help, any ideas or suggestions would be very appreciated.

 

Thank you... ........ Chuck

 

I hope it's on the good card...

 

Hi, Chuck:

Be connected to the internet.

Go to Device Manager and right click on the device of SMCF010 who need drivers.

Click on update driver driver.

Select the method of automatic update and the update of Windows should find the infrared driver, download and install it.

You also have a graphics driver issue...

This is to install the graphics...

Download and run the following driver.  You will probably get an error not supported operating system.

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=447347&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_47264_1%257CswEnvOID%253D2094%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

Conclusion of any windows error.

Go to Device Manager. Click to expand the category graphics cards. Click on the VGA Standard card.

Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software, and then navigate to the folder of the driver that was created when you ran the file.

This file will be located in C:\SWSetup\sp34749.

Make sure that the include subfolders is selected and the driver should install this way.

Once you reboot, you should have decent graphics, but not Aero as the graphics card Intel in this model is not completely windows 7 capable.

Tags: Notebooks

Similar Questions

  • HP probook 6570b: 6570b hp Base system device and unknown device

    I have hp 6570b with os win 7 Professional 32 bit.it appear in Device Manager that there is a need driver software.it shoes Base system unit hardware and unknown device...

    Hardware ID base system device

    PCI\VEN_197B & DEV_2392 & SUBSYS_17AB103C & REV_30
    PCI\VEN_197B & DEV_2392 & SUBSYS_17AB103C
    PCI\VEN_197B & DEV_2392 & CC_088000
    PCI\VEN_197B & DEV_2392 & CC_0880

    Unknown device hardware ID

    ACPI\HPQ6000
    * HPQ6000

    Hello

    Should be below card reader driver.

    http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212928 & swItemId = ob_115197_1 & lang = to & CC = US

    And HP 3D DriveGuard on the following link.

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212928 & swItemId = ob_110813_1 & lang = to & CC = US

    Kind regards

    DP - K

  • missing driver, other devices (unknown device)

    Hello

    Please I need the driver for this system;

    HP probook 450 G1

    Windows 7 Professional sp1, 64-bit OS

    other devices (unknown device), hardware id:

    USB\VID_138A & PID_003F & REV_0104
    USB\VID_138A & PID_003F

    Hello

    The driver you need is on the following link.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405166&swItemId=ob_134806_1&swEnvOid=4058#tab3

    Note:  Make sure you have first installed HP customer Security Manager and Device Access Manager for HP ProtectTools.

    Kind regards

    DP - K

  • PCi device & Unknown Device Driver please

    Hi, I have a Hp Pavilion G4 1303 - to the
    And I update my os Win7 to win 8 pro
    ND, now I have 2 unknown device under other devices, they have yellow warning mark,

    1. PCI device
    Hardware ID
    PCI\VEN_10EC & DEV_5209 & SUBSYS_3564103C & REV_01
    PCI\VEN_10EC & DEV_5209 & SUBSYS_3564103C
    PCI\VEN_10EC & DEV_5209 & CC_FF0000
    PCI\VEN_10EC & DEV_5209 & CC_FF00

    2 unknown Device
    Hardware ID
    ACPI\VEN_HPQ & DEV_6001
    ACPI\HPQ6001
    * HPQ6001

    Please give me the software & driver of the device,
    Its urgent please thanks in advance

    Hello

    You must install the following.

    Realtek card reader driver.

    HP wireless button driver.

    Kind regards

    DP - K

  • found new hardware wizard appears and unknown device device Watch Manager

    Since a few days ago, the Add New Hardware Wizard keeps popping up. I looked in Device Manager and found an unknown device (yellow exclamation mark) should I delete the device? I don't know what to do to identify which device is unknown.

    If you remove it, then he'll probably be back the next time that you start.

    go to start / all programs/windows update (at the top of the list of the menu), custom search, watch your optional hardware updates and search for a driver that you have not already installed, you can get lucky. Otherwise post the details of your specifications and ask again.

    Furthermore, it can take a while to get the pages updated and you may need to install active x on the way, a line will appear at the bottom of the fixed part of your browser screen (the same as when you download) If this is the case, click on it and install active x, then a box should appear and tell you allow I think.

  • can you identify this unknown device by its hardware ID?

    (On a tablet of 1027-CA TX - 2, running windows 7 RTM) I have a device that cannot locate the driver software.

    Under the ownership of the device hardware id, there are two values:
    USB\VID_1B96 & PID_0001 & REV_0000 & MI_02

    USB\VID_1B96 & PID_0001 & MI_02

    If you have the technical resources available, could you help me to identify the device and perhaps find a driver compatible Windows 7 RTM (or Vista)?

    Thank you very much.

    Hello

    USB\VID_1B96 & PID_0001 & REV_0000 & MI_02

    USB\VID_1B96 & PID_0001 & MI_02

    N-Trig DuoSense scanning Software and driver here

    ACPI\ENE0100

    * ENE0100

    Ene Cir receiver here and if that doesn't work try here

  • Unknown device ACPI/HPQ0004

    Hello

    I installed the 64 bit, win 7 on my dv8-1190ef, but there is an unknown device (ACPI/HPQ0004).

    Please help me solve this problem!

    That's the guard HP 3D drive.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-76187-1 & LC = on & DLC = in & CC = US & Product = 4011375 & sw_lang = & os = 4063

    This is a slightly different model of dv8, but it will work. I guess HP forgot a list for your specific model number. I couldn't find FRO your support in any case page.

    And here's a more recent version

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-82853-1 & LC = on & DLC = in & CC = US & os = 4063 & Product = 4229850 & sw_lang =

    I found this one for a HP Envy, but as mentioned, it will work fine for a dv8, or any other laptop with burner HP hardware 3D of the guard.

  • HP 15-D017TU: unknown device driver

    I can't find the drivers for this unknown device

    Hardware ID

    IUSB3\ROOT_HUB30 & VID_8086 & PID_1E31 & REV_0004 & SID_218F103C

    IUSB3\ROOT_HUB30 & VID_8086 & PID_1E31 & REV_0004

    IUSB3\ROOT_HUB30 & VID_8086 & PID_1E31

    Someone help pls

    Hello

    Please try:

    http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_121946_1 & sp4ts. OID = 5405424

    Kind regards.

  • Satellite U400 - 217 PSU44E - unknown devices - no driver installed,

    Hi, can anyone help?

    Recently installed windows 7, works very well, but in the device under other devices Manager, have unknown device and I can't find the right driver that I cannot identify the device.

    The details are

    manufacturer - unknown
    location - system compatible ACPI microsoft
    status - drivers not installed, code 28
    Hardware ID - ACPI\TOS6205 and * TOS6205

    I also replaced the battery recently.

    Thank you

    Please check this HowTo:

    How to identify an unknown device?
    https://Forum.Toshiba.EU/showthread...unknown-device

  • ProBook 455 G2: Unknown device PCI\VEN_1022 & DEV_1423 & SUBSYS_14231022 & REV_00

    Hello

    Have unknown device: PCI\VEN_1022 & DEV_1423 & SUBSYS_14231022 & REV_00

    What means K15.3 AMD - IOMMU v2

    I autodetectutility.exe use - but it does not help

    After that uninstall catalist and install sp72887. Unknown device to remain

    HP ProBook 455 G2

    What can I do?

    Hello:

    You will probably need to manually install the driver.

    I know that is the one you need, because if you look at the contents of the driver file folder you can see that this driver has support for the hardware ID you have posted.

    [AMDIOV. NTamd64]
    % IOMMU. DeviceDesc%=NULL_DRIVER,PCI\VEN_1002 & DEV_5A23
    % IOMMU. DeviceDesc%=NULL_DRIVER,PCI\VEN_1022 & DEV_1419
    % IOMMU. DeviceDesc%=NULL_DRIVER,PCI\VEN_1022 & DEV_1577
    % IOMMU. DeviceDesc%=NULL_DRIVER,PCI\VEN_1022 & DEV_1423
    % IOMMU. DeviceDesc%=NULL_DRIVER,PCI\VEN_1022 & DEV_1437
    % IOMMU. DeviceDesc%=NULL_DRIVER,PCI\VEN_1022 & DEV_1449
    % IOMMU. DeviceDesc%=NULL_DRIVER,PCI\VEN_1022 & DEV_1611

    Sometimes the automatic installer does not install the driver, so you must outwit the PC.

    Go to Device Manager and click on the device IOMMU requiring the driver.

    Click the driver tab.  Click on set to update driver.

    Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

    This file will be located in C:\SWSetup\sp67924.

    Make sure that the include subfolders is selected and the driver should install.

    Restart the PC.

  • Unknown device on the Satellite A100-153, after BIOS update to 5.1

    ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

    Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

    Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

    Hello

    ACPI-> Advanced Configuration and Power Interface
    ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
    For example: ACPI is necessary for the standby and hibernation mode.

    Now your question; the new BIOS has been updated and configured to using VISTA.
    It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

  • HP Pavilion 15 au118tx: unknown device

    Got the new HP Pavilion 15 au118tx and then that virtually everything has worked, I have labeled missing pilots 'Unknown device' Device Manager. Here are the details that I can share:

    Device Instance path

    ACPI\MSFT0101\2 & DABA3FF & 2

    Physical device name

    \Device\0000006e

    Hardware ID:

    ACPI\MSFT0101

    * MSFT0101

    Hello

    If you are running Windows 7, did you apply the Microsoft Hotfix at the following link?

    https://support.Microsoft.com/en-us/KB/2920188

    Kind regards

    DP - K

  • Unknown devices in device Windows 7 Manager - dv7-2170us

    I have a laptop dv7-2170us.

    I did a clean install with Windows 7 Home Premium 64-bit.

    I used the drivers for this model of laptop on HP's site.

    I get a few unknown devices in Device Manager.

    I tried to uninstall the device and re - install to allow Windows to re - detect but no drivers are found.  See the pictures below, what devices could they maybe refer to?

    I have all the necessary drivers load that I know and I installed a driver who looked valid on the site of HP drivers.

    EDIT: Everything works!  Thanks for the tip of Daniel.  I googled how to identify the ID of material and is here with this site http://www.pcidatabase.com/ , punch in the device id and bam, it IS the card reader.  Weird because it worked perfectly.  But I downloaded the driver even re-installed and this solved the problem.

    =============================================

    I tried the Intel Chipset utility, did not work. However, here is the hardware id:

    If you look closely, you will notice that each of these devices are in fact different.

  • Re: Tecra A7 PTA71E - unknown device TOS1901

    Hello

    I have a Toshiba Tecra A7 PTA71E-07500VPT with Windows 7 Prof
    I did a BIOS upgrade to A6, then I installed the Windows / Prof. SP1 PT.

    Problem: When I open the Managment devices, I see one '? "other devices"and"!" hardware ID "unknown device".
    ACPI\TOS1901
    * TOS1901

    Where can I find a solution?

    Thanks in advance.

    JLapis

    Hello

    Check out this Toshiba document:
    http://APS2.toshiba-tro.de/KB0/TSB7501W20006R01.htm

    Please download and install the "password utility" or the "Utility supervisor password" to get this resolved.

  • HP Pavilion P289SA: Unknown devices

    Hello

    I have a HP Pavilion P289SA laptop and I installed Windows 7 sp1 with no problems, but I still 2 yellow warnings in Device Manager.

    Both are unknown devices and hardware IDS are as follows:

    ACPI\SMB0001

    * SMB0001

    And

    ACPI\HPQ6007

    * HPQ6007

    I installed the latest AMD drivers from the Web site, which has been successfully installed the 3 USB ports and graphics, when I installed them it says it included pilots smb, but like I said I have still two unknown devices.

    Tried to download AMD driver on the HP site for its model laptop where it has what I need, but he gets 9% and none does not move.

    Help

    Hello:

    You need these drivers for devices...

    This package provides the driver that allows the Synaptics TouchPad in the notebook models that are running a supported operating system. The pilot turns the touchpad General (for example, double-click and scroll) feature and provides a user interface.

    File name: sp69001.exe

    This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

    File name: sp71811.exe

Maybe you are looking for

  • My USB - C cables do not have a USB port on the other end

    I bought two USB - C for USB cables to ride my new Macbook, and running, and two of them will not accept a USB key.  It feels like they are poorly built and it does not.  Is this common?  Y at - it something I don't know?

  • Saving and exporting passwords

    I think to update to El Capitan of Cougar and I want to save my passwords web various on the external drive first. I forgot where an episodes on my iMac I can find these. Help and reminders please. Thank you Rob

  • MIni 1100: HP mini bios password

    Can someone help me with the HP mini BIOS password? That's what I get: Enter the CURRENT password:-x Enter the CURRENT password:-x Enter the CURRENT password:-x Password check failed FATAL error... System stopped. CNU9315zd8 Appreciate the help; Than

  • Problem of Earth / Circuit Design

    Dear community, in advance, I thank you, I hope this is the right place to ask this kind of question. I would like to design a very small preamplifier pre - one preamplifier because it is mounted on the head of the insect to behave and a later analog

  • My Sansa MP3 player does not connect to the Windows Media Player.

    I connected several times using the same wires.  This time THAT WMP says "connect a device" in the upper right corner.  This is probably an easy fix.  Any suggestions?  Thank you.