It takes 13 seconds for a link to open in IE of Twitter app Microsoft people

Similar Questions

• Can manage Windows XP Home Edition of Windows 8? Get the error codes for the security updates (0 x 643). ALL through Microsoft Tech INFECTED with the virus and Trojans tried. I need help BADLY. Thank you.

  I tried every thing blessed with technology microsoft... always hanging in limbo here.  Tired of doing constant comprehensive analyses, etc. in order to remove the constant threats.  Apparently my McAfee can't stay with her either.  Need help with the download/repair these seeds as soon as possible.  Thanks to all those who wish to help me - it would be that popular, for sure!

  The question makes no sense.

  "Can manage Windows XP Home Edition of Windows 8?"

  Two problems: there is no Windows 8 and even if there were, Windows XP Home Edition would not not 'manage '.  ;-)

  I drop McAfee for a few different freeware products.  Or better yet I'd get two products 'cost' (~ 25 and 60 dollars) and install them and use them in the future - but WHEN you are trying to clean up.

  You seem like you maybe sincerely - at a time when a format/install of Windows XP/patching/installation of applications/patch/restore backups of your data is the best course of action.

  However, if you are willing to work - maybe we can at least get things cleaned up to a certain point where you can get a good backup before doing this (otherwise avoid doing all together.)

  In the order shown, do not jump (no matter what you do, what you have done in the past, etc.) ...

  First of all - download, install, operate and put to update and then run a full system scan with the following two (one at a time, reboot in-between):

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  After you perform a full scan with one then the other and remove anything they have all two are completely, you can uninstall these products, if you wish.  This initiative will allow to check there is no malware floating around your system which could cause problems.  If you ask - no, Norton probably does not protect you from what these applications can find.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Search online with eSet Online Scanner.

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now try usig the Fixit (Yes - try to use it again) to reset your Windows Components Update (you'll do the aggressive version, not the other):
  How to reset the Windows Update components?

  Reset.

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Reset.

  Now, open Internet Explorer, visit http://windowsupdate.microsoft.com/ and do a CUSTOM search for updates.  Install any critical/high-priority ones and - for now - to ignore all those in option (always do this for material updates optional here.)

  Restart if necessary and continue to visit this web page until you have not yet updated to high priority.

  Now - if your problem is with the facilities of the .NET Framework...  You can end up with something like:
  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx
  to uninstall a few versions of the .NET Framework, then you can try to install again - but you should not do this until the machine is supposed to be cleaned.

• My site optimized (22-59K) uses a grid for layout system. It takes 10 + seconds in Firefox 7,8,9 to load, other browsers need less than 1 second. Y at - it other that to use a 2-column layout, some recommended grid with which Firefox gets along?

  Someone commented ago about 9 weeks for my site to load very slowly. I tried and had no problem.

  But a few days ago, I realized that the first call (after rebooting the system) in Firefox 7, 8 and 9 of Firefox Firefox takes 10 + seconds (white screen) while other browsers have need of about 1 second. After the initial call each page loads faster than in other browsers.

  Without content management system, I got the same results. In simply removing things from the grid of my stylesheet, pages loading less than a second. I tried other grids http://cssgrid.net/, http://www.webdesignerwall.com/demo/simpler-grid/940grid.html , but had the same number.

  A identify the extension that is causing the problem in your case?

  He is always unpredictable, how the extensions behave with a new version and in case of problems you can contact the developer of the extension to inform him about the problems.

• Firefox seems to hang or take a break for about 10 seconds after selecting a file in a file upload field

  Windows 7.

  This happens on all websites that uses a file entry box to download images/files.

  I click on Browse.

  Select a file, and then click "Open" in the file browser window.

  Then, firefox seems to hang or take a break for what it is between 5 to 12 seconds, after this time, the name of the file appears in the file input field - you cannot interact with the browser at all during this time.

  Can be reproduced every time i run firefox - does not happen in IE or another browser on that machine.

  Can you check this problem on Firefox 9?

  • getfirefox.com

• Standby time for Windows takes 45 seconds (Bios). Is this normal?

  Hello, do not bother

  I used 6 months of Windows 8
  But the standby time Windows takes 45 seconds (Bios)
  Is this normal?
  1-on start Windows programs are disabled
  What a way to speed up Windows 8, or do you recommend a good software

  Thank you.

  Original title: windows 8 watch

  I just wrote about how to help fix a slow PC.  Care to take a look and let me know what you think? http://cmdrkeene.com/fix-sluggish-slow-PC

• iPhone iOS 5 + 10: press the button to unlock home takes 5 seconds to unlock the device

  Hello!

  Yesterday, I did the update to iOS 10 on my iPhone 5.

  Now, it takes 5 seconds to unlock my iPhone 5 after pressing the home button. It is average for a long time! Everyone even experiences?

  Thank you!

  martin_777

  It is normal for the old model of the iPhone 5. in any case, you can try to reset your device and check if it helps.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• I upgraded to firefox 3.6 recently 11, but firefox11 works well with my windows 7. It became slow and strucks on for 6 seconds for each click.

  11 Firefox hangs frequently for about 6 seconds for each click as switching between tabs, closing tabs, opening new tabs.
  by clicking a link etc,
  3.6.17 worked well, but 11 Firefox is too slow.
  problem is the same with version 4 and 4.01
  can someone please help me to solve my problem

  I'm sorry that you have problems with Firefox doesn't work is not as fast as it should. I'd like to help you here so that you manage Firefox running at great speed.

  Firefox, try to start Firefox in Safe Mode. It temporarily disables your extensions, customizations, etc. so that we can see if they slow down Firefox. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker. Once you do, you can disable this add-on.

  I also see you have advise McAfee Site. I would recommend disabling that, as it is known to cause leaks of massive memory than Firefox slow down

  If Safe Mode does not work, you can also try updating your graphics card driver. Update your graphics drivers to use hardware acceleration and WebGL reading can show you how to do this.

• It takes 40 seconds to start firefox. Would it be faster? How?

  before the opening of firefox it takes 40 seconds. What could be the problem or is the normal time to open?

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

• DAQmxClearTask of output channel takes 20 seconds

  I have a camera of NiDAQmx on the NI PCI-6713.

  I create a task for the analog output.

  I stop the task and delete it using DAQmxClearTask.

  The call to DAQmxClearTask takes 20 seconds. On other systems I use the same call takes less than a second.

  Can someone help me understand & solve the problem?

  My driver version is: 9.7.5

  I work under windows 32 bit, visual studio 2013.

  Thank you

  Yoav Pinsky

  Hi Yoav,

  Have you tried using NI Trace of IO to help diagnose the problem? This tool can give you a sense of whether any involuntary or repeated call is made. You can find this tool in the menu start > all programs > National Instruments. Once the with tools open just to start the trace with the green arrow, run your code, and then stop the trace.

  In addition, you can find this post on the forum useful.

  http://forums.NI.com/T5/PXI/why-does-it-take-so-long-to-clear-a-task-with-DMA-transfer-using/m-p/237...

  In this case, the problem was due to driver and device conflicts. You can reinstall the DAQmx driver if you haven't tried that already.

• T450s startup takes 35 seconds before displaying the splash screen. (wake up 11sec)

  The following are my problems:

  1. when starting the machine, it takes about 35 seconds before the first activity screen (screen of Lenovo). After that, it starts normal.
  2. when waking off mode 'sleep', it takes 11 seconds before I see directed power stop to 'breathe' and wake up the screen.

  It feels like it is a hardware/bios on the issue, as (so far I know) hdd/ssd is accessible only after the bios has loaded and completed its audits of material. When you paste into a bootable usb it starts only flicker after the bios was loaded on the screen.

  Question:
  Anyone have an idea why my laptop waiting so long to start or wake? I don't mind wait a bit, but in 35 seconds + startup time normal is really boring. Especially with the fact that the laptop shows no sign of life for 35 seconds after ignition briefly the backlight on the keyboard. Alarm delay is also very annoying since even my 7 year old laptop BSOD to wake up faster, and I use a lot "sleep" mode.

  Some origins I think about:
  -Verification of the material during the initial start-up of equipment does not yet recognize a dedicated GPU card. (POST: Power On Self Test)
  -I don't think it's a problem with my software because the problems occurs before any media playback.

  I already tried things:
  -Reset the bios.
  -Start in legacy mode.
  -Update the bios
  -rebuild MBR (although I think that's the problem.)
  (- Refreshing installation of windows, even if I do not expect that's the problem.)

  This problem was already at the beginning (with origenal material):
  From the first time I started the laptop (with HARD drive), I noticed that it took a long time to start. I remember repeatedly pressing the button ON / OFF and think I did something wrong, when all of a sudden the 'Lenovo' screen appears.

  I hope someone can help me!

  My problems were solved!

  An engineer contacted me that they received a mainboard replacement and they wanted to make an appointment. I gave them the address where I worked the next day because I'm very mobile, and an engineer came by the next day. It appeared to be a qualified IBM engineer and test my machine and came to the same conclusion as me. He then did some tests to see if the problem was caused by something else, then the motherboard but eventually replace my motherboard with good care.

  After the replacement of the startup time and wake up was normal as it should be. I'm very happy with the service that Lenovo ThinkPad gave me.

  I have to add that when I called for the support that I got someone on the line who couldn't really understand me, neighter, Dutch or English. But it was also duo a bad connection, it seemed to me... But after that call I really didn't expect that it would come to a good end. I then really suppriced isn't 5 days later a Dutch engineer Chief called me for an appointment.

• reading data takes 2 seconds

  Hello

  I have a code that contains three while loops. The first loop is to control a DAQ hardware that provides a continuous voltage (changing by no 0.05, or 0.02)

  to run an electromagnet to generate a field of scanning-ve to + ve. When this loop completes the second loop begins to reverse the procedure, and when he finished the judgments of all of the code. The third loop is to take the action it takes in the field by reading a Gaussmeter and also a

  voltage of the test sample (no relation to the DAQ voltage) of a metre. This loop starts at the first loop starts and stops when the second loop stops.

  The problem I have is that I have to put a delay time (2.5 sec) in loops of first and second for a syncornization with the third loop that takes the action. Without it, the third loop will ignore some points that the first loop and then the second are faster. The kiethely is connected via Gbspecifications TO the Gaussmeter is connected via RS232. I really appreciate any help in getting this sort.

  Thank you very much

  Alain

  
  

• "laptop HP 2000: why should I keep my keys for a second for my keyboard display what i type.

  "Why should I keep my keys for a second for my keyboard display what i type.

  Hello

  Check the following points.

  From the windows control panel, open the ease of access Center and click on the link "make the keyboard easier to use.  If there is a check mark in the box beside 'Turn Sticky Keys' or ' turn on Filter Keys, Remove these and then click on apply to apply the change to see if that solves the problem.

  Kind regards

  DP - K

• I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do

  I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do?

  Hello

  Your question is beyond the scope of these forums.

  Please use the following links for that matter.

  Network Infrastructure servers Forum:
  http://social.technet.Microsoft.com/forums/EU/winserverNIS/threads

  Category of the Windows Server:
  http://social.technet.Microsoft.com/forums/EU/category/WindowsServer

  Concerning

• After that I take my picture for eprint that he wants me to search for public printing where my printer?

  After that I take my picture for eprint what he wants me to search for public printing. Why isn't my printer recording, where's my printer & how to print my photos.

  Hey Donovansmom,

  Looks like you are using the ePrint on the app store app. This application is only for sending printing to local printers in the neighborhood like FedEx or UPS. Your printer will find there.

  You can try to use the HP iPrint Photo 3.0 app or installation ePrint by following the link below.

  http://h71028.WWW7.HP.com/HHO/us/en/EP/articles/setting-up-mobile-printing.html

• Call to videoControl.getSnapshot (encoding) takes 5 seconds on the torch

  Hello

  I have an application that integrates the camera via the api. The initialization of the camera and preview are fast. When I click on the ball control or touchscreen I run the code:

  JPEG Byte [] = _videoControl.getSnapshot (encoding);

  The torch, it takes about 5 seconds for the camera to focus and take the picture which is the way to slow down. The internal application of the device does not work quickly. When I click to take a picture, it is immediately taken. Why is the api so slow. I tried to add parameters during initialization of the camera, but without effect:

  Let me try this on my torch and get back to you tomorrow... I just wanted to report that it is for a few days and I have been absent due to a long weekend here.

  The version you are using does not contain the patch that I mentioned, so I would like to confirm if the problem you see is the bug I mentioned and if that fixes the problem, and we can go from there.