Items and .psd files

Similar Questions

• 10 items and RAW files?

  10 items and RAW files?

  Title of the message was edited by: Brett N

  Just keep update of the application and all this fine

  Just check the details of the device you are using

  Click on the link

  :-http://kb2.adobe.com/cps/407/kb407111.html

  ................

• What does it mean to 'Include develop settings inside JPEG, TIFF, and PSD files metadata?

  I wonder what the option ' include develop settings inside the JPE metadata . G, TIFF, and PSD files"in settings/metadata catalog done?  What happens if you uncheck the box?

  Bob12312321 wrote:

  also when this is unchecked lightroom always will record keyword changes to raw (nef) files?  Thank you!

  Metadata (metadata 'real' like keyowords or develop adjustments) are never saved in Raw DNG files (like .nef, .cr2) directly. With these files, there is always a file called (with the .xmp extension) created to contain the XMP information.

  And Yes, if the option is disabled, LR record key words on the XMP sidecar, when you 'Write to the metadata file' or have the autowrite option active.

  Beat

• Photoshop CS6 (suddenly?) Unable to open his own tiff and psd file, why?

  I have a file with Smart layers that I can save it as a tiff, psd or psb.

  If I save as psb, all right. I can open the files normally,

  If I save as tiff or psd photoshop can not open these files and tells me:

  Could not complete your request because the file is not compatible with this version of photoshop.

  I work with photoshop on a daily basis and have not encountered this problem before.

  Y at - it a simple explanation of this behavior?

  It is difficult to follow your video without audio thing happen quickly pause help. I think that you have created this file with perpetual Windows CS6 version 13.0.1.3.  In my view, that is what I see in its metadata in Photoshop Adobe Photoshop CS6.    No. created with Adobe Photoshop CC 2015.

  I'm on Windows 10 and have the version of CS6 13.1.2 subscription which has some differences with the Windows constantly CS6 13.0.1.3 version you are using.   Still I can't open this file with Photoshop CS2, CS6 13.1.2 CC or CC 2014 version.  Only CC 2015 will open this PSD.   Software Adobe as must software has bugs.  Adobe fixes some but not all.  You have been bitten by a BUG in the IMO.  You must work around this bug to dose does not have old versions of Photoshop from Adobe bugs.  You know there is a bug and how it bites you must find a way to work around this bug. Adobe will not help you.   CS6 is not be fixed by Adobe...

• My CR2 files are not saved as PNG and PSD

  When I import files in the organizer of 12 items, I want to use the Instant Fix Smart Fix option. CR2 files are exported in PNG format and I want them to be PSD files, I don't have a way back to the options of how to save my files by using the instant correction. I would really appreciate some help on this. I can't get technical support by going to the Adobe Web site - I always land in the Forums.

  Edit > preferences > General

  Reset all warning dialog boxes

• When I sent a point (from document file) in the garbage can, it makes a copy of the item and puts it in the document file

  Hello, please help.  When I try to remove an item from the My Documents file, it sends the item to the trash to recycle, BUT ALSO creates a copy and put it in My Documents. It drives me crazy.  Thank you

  go to msconfig (type in the search box in startmenu or run in xp, and then press enter) then prepare your computer to clean boot by disabling all startup items and any of the services of windows, and then restart your computer. See if it makes a difference? If it did then you know who caused the problem.

  Then, make sure your system is clean of viruses and spyware and also

  using the analysis

  http://www.Malwarebytes.org/

  It is recommended to perform a complete analysis using above program anti-malware and a good anti-spyware and antivirus as:
  for viruses:
  http://www.avast.com/en-GB/index
  For spyware:
  http://www.SUPERAntiSpyware.com/

  Try deleting the files in 'Safe' Mode, see if it happens again?

• "The file is not found" error message when you try to view recent items list for word and excel files

  Title files: original vista on the recent items list does not open

  When I select a file from my recent items list, I get an error message indicating that the file is not found, but it lists the correct path to the file, and if you go to this path of the file, the file is clearly there.  This happens with word and excel files but not the adobe pdf files.

  Hi GillianMO,

  Remember to make changes before this problem?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Diagnose and repair Windows files and folders problems automatically
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If the problem persists, I suggest you to send your request in the Forum Office for more specialized help.

  Office Forum

  http://answers.Microsoft.com/en-us/Office/Forum/Excel?page=1

• Error: Check the location of the item and try again - when you try to delete a file

  __Deleting a file?
  I downloaded a video file in a folder.  The folder contains the name of the file, the size, but under type said: file.  When I try to delete the file I get a error message "point is more in C:\...\vids.  Check the location of the item and try again.  How can I delete this file?

  Hello

  Start in safe mode and then try to delete the file from there.

  Refer to this link and follow the instructions to start the computer in safe mode:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why can't copy several layers and groups in a new PSD file?

  I created a bunch of new files PSD w / they must be the pixel dimensions. But I can't copy over 1 layer in these new files in a source file (w / all of my work). Why is this? Does anyone know?

  Go to Image > Mode for each file type and check that they are both RGB, or the two etc. CMYK. An adjustment layer, such as a curve or a Hue/Saturation, which is setting red, green, and blue pixel in an RGB document, cannot be moved in a CMYK document (or grayscale, etc.) because the color channels, that layer is adjusted are not there. This means that your new PSD files should be replaced by the same color mode as the documents you want to duplicate adjustment layers of.

  Steve

• I have adobe Prime Minister 13 items and it will not be exported my file to fit my file should be 1.3 GB, but rather after his fact make its similar 300 MB

  I have adobe Prime Minister 13 items and it will not be exported my file to the right size, my record should be 1.3 GB but instead he makes like 300 MB or 24bites

  I figured it out unfortunately I had to erase my entire computer. I think I had some kind of virus that could not find my anti virus. Adobe works fine now.

  Sent from my iPhone

• All my adobe files are corrupt. I saved them on my computer, my external hard drive and flash players. All report them at the same time as all my PSD files and I are corrupt.

  All my adobe files are corrupt. I saved them on my computer, my external hard drive and flash players. All report them at the same time as all my PSD files and I are corrupt.

  My computer recently had an error with the System 32 and will not open if I reformat, which means I lose everything on it. No problem, because I supported straight? It turns out that all my backups say they are corrupt. Do I just terrible luck, or is there a reason why none of my files works when I try to open them on another computer?

  Try the bugcheck on the ext hdd. Right click on the drive in 'my computer' > 'properties' > 'Tools' > click 'check now '.

  You can restart your pc and reconnect the ext hdd.

  Recuva Piriform is a free data recovery program.

  Google for more solutions

• I have 11 items and wish to treat the RAW / NEF files. How can I do this?

  I have 11 items and wish to treat the RAW / NEF files. How can I do this?

  You can certainly buy PSE14 in the upgrade price. Why not use the link below to install it and try it free for 30 days.

  https://helpx.Adobe.com/Photoshop-elements/KB/Photoshop-elements-downloads.html

• Add a new item to the PSD file makes the puppet to stop working correctly in c.

  Hello

  I am trying to add a new layer in my PSD file - just put a hat on the head of puppets.  Now, when I save the PSD and reassemble the hat in the ch is displayed but all of a sudden the arms fold is more correctly.  They teleport just whole body when I drag around.  It's very frustrating!  I'm doing something wrong?

  If a puppet 'Islands' (i.e. only parts) within a single mesh, Ch will automatically switch the mesh to be rectangular to encompass all the Islands (otherwise they would disappear). If this is your problem, you can see which parts are islands by switching the mesh shape popup in the properties panel (with one of the selected layers in the Panel of the puppet) to outline instead of Auto. The Islands will disappear when viewing the puppet in the places Panel. If you really want the group as an island, it's OK, just check the option to deform independently and giving it his own net.

  Check show Mesh at the bottom of the puppet Panel can also help to solve this problem.

  We are working on what is more simple to use.

• Hey, so I just bought first 13 items and I downloaded the installation file and spoke to install, but it is stuck at 2%

  I just bought first 13 items and I downloaded the installation file and spoke to install, but it is stuck at 2% on installation.

  It then comes up with the error screen but I click on details, and he said: there is no Web page, I have restarted my computer, removed other Adobe products, I don't know what to do d:

  I tried lot D:

  He's going to tell me what IS the error that I have for it either... so I can check to fix D: said that there is no Web page...

  alexas

  Thanks for the reply.

  You just solved your problem. If not all, basically everything. You need 64-bit installation files for your 64-bit computer.

  You need two installation files - for extracting .exe and .7z the program itself. These two files have 64 in the name of the file if each is to be used in a 64-bit system.

  If you have purchased serial number...

  a. you can go after the series of 64-bit installation files where you are

  or

  b. downloading 64-bit from the following location and insert your serial number purchased by them during the installation.

  http://prodesigntools.com/Photoshop-elements-13-direct-download-links-premiere.html

  Important... carefully perform the ' Note: very important "on this web site in order to avoid the access denied Message. Don't forget: you are using the trip to Adobe mentioned must be authenticated, you use the web site for the 1 (.exe) file links and file 2 (7z).

  or

  Try download from c.

  http://www.Adobe.com/downloads/other-downloads.html

  Please let us know if your observation was the key to the solution.

  Thank you.

  RTA

• Had a project done with first elements 11.  All media files and PRE files were in the same folder on an external hard drive.  Received a new computer, loaded first items 11 (which of course doesn't recognize not all previous projects as it is)

  Had a project done using first items 11 (the file exported and posted on youtube).  All the media files and PRE files associated with this project were located in the same folder on an external hard drive.  Got a new computer, responsible for first 11 elements (which of course doesn't recognize not all previous projects because it is a new installation) and now cannot open the original project to make some adjustments (connected to the external hard drive of course)...  Even tried to open the last saved auto program as well, no luck.  Just get a shell of the original project, but no real media file is passed in. Then get a prompt asking you where the file "rendering-3090026..." (20 More digits) is located.  Looking for C drive and external hard drive without success. Help!

  

  delilah12

  Which operating systems are involved - old and new?

  The external drive has the same drive letter on the new computer as it did when it was used on the other computer?

  Where are the video preview and the old led, Audio preview files compared to new? See Edit Menu/preferences/Scratch discs?

  Are all the place where is the file... messages just to render files? If all are for rendering files, what happens if you click ignore for their

  messages? Can you enter into the project and render it again if necessary and proceed with the project?

  Please see the bulletin. With the above information, we will decide which way to go? It seems that a media disconnect situation has developed in

  the passage from one computer to the other.

  RTA