iTunes always says "stop work"
Hey there,
Thanks for your question. Can you give us a little more information about your problem? When the issue started to happen? Have you recently updated your operating system or iTunes software? Here's a basic troubleshooting guide for problems with iTunes for Windows.
Fix unexpectedly closes or the launch in iTunes for Windows problems
Take care.
Tags: iTunes
Similar Questions
-
The iTunes program to stop working on my pc... the one who?
Hello
I am unable to run itunes on my PC... the software installation was completed successfully, but when I try and open itunes in the itunes folder, the following message appears "a program is causing itunes to stop working" i ' v deleted and reinstalled the software but still no luck. "Help, pleaseBPROBLEM SOLVED!
extract all the files in the download folder in itunes with winRAR installation folder and installed each component individually -
Sharing via iTunes files pages stop working when I update to el capitan
I am is no longer able to transfer the document pages from my iPad to my MacBook pro via iTunes since I upgra.
Use iCloud drive.
Implement the iCloud Drive on all of your devices - Apple Support
-
Action Center problem of address with spybot says stop working correctly
Spybot does not correctly... stop 58 times... I ran spybot and its seems to be good, no threat found... but sometimes Action Center to give me this message
Perhaps you should bring this issue to the Spybot forum.
This forum is for Microsoft Security Essentials.
-
Download the most recent version of iTunes stop working correctly
When I downloaded the latest version of itunes, it has stopped working whenever I tried to play a TV show. It will play the music well.
Hello
If you are having problems with iTunes, you must contact the Support of Apple or the Apple community.
"iTunes support-how to use iTunes.
http://www.Apple.com/support/iTunes/
"Contact iTunes Support.
http://www.Apple.com/support/iTunes/contact/
Or ask in the community Apple iTunes:
https://discussions.Apple.com/community/iTunes
See you soon.
-
My taskbar in Windows Vista Home Basic stops working.
I am running Windows Vista Home Basic with 2 GB RAM and 1.60 ghz. My taskbar, always crashes (stops working) when I set my volume or just even click on it. I get this little window saying to restart, close it or wait for the program to respond. I click on the restart and wait until it restarts, and then it happens again in no time. Whenever it freezes I also dropped the notification volume and networking. I need help because this is starting to frusterate me. Please if someone knows how to fix this problem, please share it with me. Thanks in advance.
I have this question almost HOURLY. I want a fix.
So far, this works:
1. press CTRL + ALT + DELETE.
2. click on Task Manager.
3. click on the processes tab.
4. click on the explorer.exe process.
5. click on end process and then click on end process.
6. click on the Applications tab.
7. click on new task.
8. type explore into the Open box and then click OK. -
Satellite P100 - 160 PSPAAE Vista: all my Toshiba Utilities stopped working
All of my Toshiba Utilities stopped working.
Message appears saying "* stopped working" windows is looking for a solution.It was after that updates have been installed in the correct order as posted earlier in the forum. Not only the value added package configfree as well as PC diagnosis, etc.
I have a Satellite P100 - 160 PSPAAE under Vista Home Premium.
Any ideas? I think that perhaps is McAfee Security Center has something to do with it.
Hello
I suggest the following: recover your machine and update tools and drivers again. I don't know if McAfee is the cause of your problem, but if a system is broken on the software side, then, among the most popular and useful actions is to restore the system, and then being happy when it works again.
Would appreciate comments on your success.
Welcome them
-
Original title: Itunes does not work with Internet Explorer 9
I recently installed Internet Explorer 9 and since then, I had problems with my itunes. My itunes will not load. I uninstalled itunes and installed again, but it won't work. When I open itunes, I get an error saying that itunes has stopped working. He told that executing data closed itunes to protect my computer. Why - what is closed it? Help, please. Thank you!
Hi AndreaB1983,
Data Execution Prevention (DEP) is a security feature that protects against viruses and other security threats by analyzing your programs to make sure that they use the system safely memory.
Method 1: Follow the steps mentioned in the link below to turn off DEP for ITunes and then check
Change Data Execution Prevention settings
http://Windows.Microsoft.com/en-us/Windows-Vista/change-data-execution-prevention-settings
Note: turn off DEP for a program that you trust. See the link below
How can I prevent DEP from closing a program that I hope?Method 2: Put the computer to boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
You can check with Apple to known problems:
http://www.Apple.com/support/contact/ -
iTunes has stopped working on my PC
I can listen to music very well, but when I run a video in ITunes, I get the message that iTunes has stopped working. I uninstalled iTunes and downloaded the latest version and it's always the same thing. Any ideas?
Hi horses.
I suggest you uninstall iTunes completely reinstall and check the status of the issue.Check out the following link for more information on uninstalling iTunesRemove and then reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7.If the problem persists, I would say to contact iTunes support. -
Error "iTunes has stopped working".
After update itunes to the latest version of 12.5.1.21, its does not and always give an error like "iTunes has stopped working". Even I tried to reinstall the same version and earlier versions of it. Always the same question.
Kindly resolve.
Bene-
Hello, this article could help you Fix unexpectedly closes or launch issues in iTunes for Windows - Apple Support
-
iTunes store stops working when I click on the store
Hello, I am continuing windows 7 64 bit and I've just updated to 12.5.1.21 and my laptop says itunes has stopped working and I have to close the program after I click on the store. I can see my music and play but can't go to the store. Under details, he said:
Problem event name: APPCRASH Name of the application: iTunes.exe Version of the application: 12.5.1.21 Timestamp of the application: 57d32fa7 Fault Module name: WebKit.dll Fault Module version: 7602.1050.4.5 Fault Module Timestamp: 57 c 12000 Exception code: c0000005 Exception offset: 0000000000645e36 OS version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional information 1: 1761 Additional information 2: 1761434aed254db142ae93beb247cc5f Additional information 3: 6ca 1 Additional information 4: 6ca18a1a75b11fdbffdfc657fe0130df I tried redownloading/install and repair and restart my cpu, but nothing seem to help.
Thank you
Hello bigeasy19,
Thank you for contributing to the communities of Apple Support.
It seems that iTunes quits unexpectedly on your PC after updating to the latest version. Reinstalling and repairing the app are good steps, and we can offer some additional troubleshooting to help solve this problem.
Then follow the method on this page to narrow down the cause of the problem: Fix unexpectedly closes or launch questions in iTunes for Windows.
Best regards.
-
Why do you always make a message "Windows Explorer has stop working"?
Everytime I open a window Explorer it always stop working. Then each Explorer window will close.
Hello
You don't specify your Windows version, so here is Windows 7 - Vista is very
similar.If necessary, use Safe Mode (repeatedly press F8 as you start) for troubleshooting.
Use the startup clean and other methods to try to determine the cause of and eliminate problems.
---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista or
Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods
above is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
found)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
Ultimate and Enterprise)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
I get a message saying that Windows Explorer has stopped working and when I restart it pop again.
Hi I have windows vista basic and it worked very well until yestaday and I got a message saying windows Explorer has stopped working and when I click on restart 3 seconds later, he appears once again?
original title: Windows Vista Basic worked fine until yesterday and now I get messages saying that Windows Explorer has stopped working.HelloUse the startup clean and other methods to try to determine the cause of and eliminate
the questions.---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
I am trying to access my documents and I get a pop up saying "windows explore has stopped working".
Original title: "windows Explorer does not work.
I try to access my documents and I get a pop saying "Windows Explorer has stopped working", he spends next to her saying "windowse Explorer restarts" the box with all the options of my document is then stopped. I tried accessin while market and stop the internet, and it makes no difference.
What should I do
Hello
Use the startup clean and other methods to try to determine the cause of and eliminate
the questions.---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
pop-up window, says "winrscmde has stopped working".
pop-up window, says "winrscmde has stopped working". I did a malwarebytes update several times and there is no virus.
After the window is closed it will be always in a few seconds. When I click on "check online for a solution" will be right back with the same pop-up window.
Problem event name: APPCRASH
Application name: svchost.exe
Application version: 6.0.6002.18111
Application timestamp: 4acfb17d
Fault Module name: msvcrt.dll
Fault Module Version: 7.0.6002.18005
Timestamp of Module error: 49e0379e
Exception code: c0000005
Exception offset: 0001da22
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information 1: e51a
More information 2: 4c0d4d78887f76d971d5d00f1f20a433
3 more information: e51a
Additional information 4: 4c0d4d78887f76d971d5d00f1f20a433
Operating system: Windows Vista
Read articles:.Hello Solphins,
What was the result of the execution of the SFC from an elevated command prompt?
Often, we see crashes as a result of a program from loading at startup.
To solve these, we use the clean boot troubleshooting.
The following article describes this process:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Let us know if you have any questions.
Best regards
Matthew_Ha
Maybe you are looking for
-
I want to block incoming mail when I am absent for 3 months
I'm going on may4 and I would like to block all incoming emails.i have a gmail accounthis movements.Thank youLuke
-
WWhat should I do to keep all my photos and music files without having to complete my new mac book
-
Recovery disk does not work - what to do?
Hello I bought a genuine Toshiba recovery disc, start I press f12 as instructed, and then follow the instructions on the screen.He goes through several process then will be asked to press a button on any. The page reads as follows: WEIRD F:ready Driv
-
My keyboard stopped responding during the installation of Windows XP.
Reinstall windows xp - keyboard unresponsive I'm reinstalling XP from an official CD after reformatting the HD. On the Welcome to Setup screen, where I need to press ENTER to set up XP, nothing on the keyboard gets a response (type F3, R). It's as
-
Cannot remove/reinstall the iTunes software.
When I try to remove, reinstall or update the iTunes software, I get a message: "the component you are trying to use is on a network that is not available. Click OK to try again or find a different path to the folder containing the installation pack