iTunes and alternative player

Similar Questions

• How to recover missing files that are still on the hard drive. iTunes and VLC Player can still read the files.

  I had a restore of the system without success and now all my files (music, photos, documents, PDF files, vids, etc) are missing.  My itunes still recognizes the path to music and can play everything.  Same thing with VLC player and photos.   For example, if I go in VLC player and watch my playlist, I see that info a video is C:\Users\kevarendt\Desktop\Vids\... and the player will play the video.  However, I can't file my own.  He is no longer on my desk, where he was saved, but the path always displays it's there.  My drive is still in his usual capacity, so none of my files have been deleted.  I can't even to my user account.  All I see is a Public folder in C:\Users\.  What happened to my user account?  All the paths to my files have nothing to show, but it's still there but invisible.  How can I access it.  I use Vista Home Premium.

  Hello

  I suggest you to check that the same in safe mode if you work, try to perform the clean boot

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  If not work then suggest to activate the hidden files and folders and then check if it works very well.

   

• Impossible to reinstall Itunes and quickplayer due to a msi windows error.

  I tried many things-

  -Install the updated release of windows msi 4.5

  -clear all temporary directories

  -clear manually flying over ITunes folders and quickplayer

  Msi - MS uninstall

  -Registry cleaner

  Hey scout Ace,

  1. What is the error message that you receive when reinstalling ITunes and quick player?

  2. did you of recent changes on the computer?

  3. are you able to install any other programs?

  Method 1

  The Windows Installer service can be disabled on the computer.

  (a) go to "Start" type "services.msc" in the search box and press the Enter"" key.

  (b) double-click on the service named "Windows Installer".

  (c) check the value the ""Startup type: "field." If it is currently set to "Disabled", it is the

  problem. Change it by selecting 'Manual' in the drop-down list box.

  Method 2

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  (a) click on the ""Start " menu and later type run and press ENTER."

  (b) in the ""Open " area, type msiexec /unreg , and then press ENTER."

  (c) on the ""Start " menu and later type run and press ENTER."

  (d) in the ""Open " box, type"msiexec/regserver"and press ENTER."

  Method 3

  If the previous step fails, then check out the link below to find out how to reinstall ITunes.

  http://support.Apple.com/kb/HT1923

  If the steps above do not contact Apple support for more information.

  http://www.Apple.com/support/iTunes/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot open iTunes and not all the music files in Media Player

  original title: I can't open itunes and it worked only recently and for some reason any all my music files went to media player

  as the title suggests it is happening.  I tried to uninstall/install, safe mode and a few other things.  I'm out of options

  Hi Adaminoly,

   

  Thanks for posting your question in the Microsoft Community.

  I understand that you are unable to open iTunes and all music files replace the media player. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. you receive an error code or message?

  I suggest you right-click on any of the music file and click Open with, click Choose default program select iTunes and check the issue.

  For more information:

   

  Contact iTunes Support:

  http://www.Apple.com/support/iTunes/

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

• I want to use my mac and my husbands phone connect to itunes. Even when I sign out of itunes and make him sign in my playlists continue to flow upward

  I want to synchronize my husbands iphone with my mac. I signed on itunes and entered his information. When I plug my song itunes phone, albums etc still come to the top. How his upcoming itunes?

  If you synchronize your husband's phone using your copy of iTunes, then this is exactly what will happen. "Signing in" if applies to the iTunes account (for example when you use the iTunes Store), but iTunes will always refer to the iTunes Library that is in your own home folder which means that your playlists, songs etc.

  If this isn't a problem, then leave things as they are. The alternative is for your husband to have its own folder of iTunes music on your Mac with all HIS songs and playlists etc. To do this hold down the Option key when you launch iTunes and he invites you open or create a different library. If you do it for your husband be aware that the library will be empty until you / he adds content.

  A question - how your husband have his music on his iPhone first? Another computer?

• In addition, no trouble with iTunes and QuickTime recovery partition

  T couldn't find the post I put forward...
  My Qosmio E series (I n know where to find that one is) had a recovery partition, as said in the title... hard disk and I got it to factory settings, and so now, it seems that he doesn t have a recovery partition. How would return the recovery partition?

  2. problem Description: I tried to install iTunes. Things then began to happen because of iTunes and QuickTime do not install it... Windows Installer Gets a deep mistake... that keeps me so to uninstall anything related to iTunes and QuickTime and windows update then gets a code 80070424...

  Initially it has disabled my DVD player but I fixed... What can I do to make it back to the normal execution and able to install iTunes...
  This problem was happening over a period of 3 days
  My computer is on a network with another computer.

  Thank you
  Operating system: Windows Vista

  > Couldn t find the post I put forward...
  Just click in this thread on your account name and you will see the list of all threads that are created.

  I saw your ad on the other and you're pretty confused with this. On laptops Toshiba, there is no recovery partition and recovery image is recorded on the second partition in the file called HDDRecovery. Do not change anything here and you will be able to use the HARD drive recovery facility when you want using F8 and repair my computer option.

  iTunes and QuickTime are not Toshiba applications and if you have problems with it you should contact Apple and their support. They have designed and tested clean products and they should be able to help.

• Creation of MP3s to iTunes and what to do next.

  I created the MP3 versions of all my music files on iTunes (to add to WMP) by changing my suggestions in iTunes and using the "Advanced" option Should I delete the AAC versions from iTunes or should I erase them from my computer completely?
  I can also create MP3s of the protected AACs. Any ideas?
  Also, tried to add my files to the WMP library and, although she found them, he didn't add them
  I did the following command to create the MP3s:
  1. open iTunes and click Edit, preferences and go to the general tab
  2. click on the button "import settings".
  3. change the "import using" at "MP3 encoder".
  4. click OK and go back to your music library
  5. Select all the songs in your library (using the SHIFT key or Ctrl-A)
  6. click on "Advanced" and then "Create MP3 Version."
  The songs begin to convert and (depending on how much you have in your library of songs), it's pretty fast.
  7. open Windows Media Player and go to add to the library
  8. click on OK - Windows Media Player begins to search for songs on your computer and it should find the MP3 versions and add them

  Hello

  You will not be able to convert a file if it is protected against copying.

  You can remove it from the computer once you have converted the files in MP3 format. In the case where if you need it in the future. You can also make a backup of these files.

  http://Windows.Microsoft.com/en-us/Windows-Vista/convert-music-videos-and-pictures-from-one-format-to-another

  You can also contact iTunes for more information: http://www.apple.com/support/itunes/

• I am trying to burn a cd on iTunes and it says __Non supported drive found... burners _ so I click on burn, then says Disc Burner or software not found.

  I try to reinstall the program, but it simply doesn't.

  Help, please!

  Hello

  Having too many CD/DVD programs can cause problems, in particular those charged pieces of
  themselves at startup. Try to uninstall iTunes and more recently added (not those
  included with your computer) to see if that helps.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I loaded windows 8 and have a dvd matshita bd - mlt uj23oas in a sony viao and it player will not work what I do

  I loaded windows 8 and have a dvd matshita bd - mlt uj23oas in a sony viao and it player will not work what I do

  Hello

  Check this location of registry for Upper and Lower filters...

  They will appear on the right after clicking on the location of Reg...

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4d36e965-e325-11ce-bfc1-08002be10318}

  Remove all entries found perhaps restore your disk, but can also cause something to stop working...

  Maybe you can identify the program causing the problem with the name of the filter and update...

  An example of this is iTunes... It uses a "GEAR" driver that can cause problems...

  Install the most recent usually solves the problem...

• Remove Java and Flash Player?

  I asked here how to install Java and Flash Player, and I think I did, but I'm not sure I have remove 100%. Is there a way I can see if they are deleted?

  For Java, open Termonal paste this back in & hit...

  Java-version

  For Flash...

  http://isflashinstalled.com

• ITunes and the AppStore do not work with Sierra

  I upgraded to El Capitan Sierra and now ITunes and AppStore do not work. The message says something wrong with the internet connection and not able to connect.

  I tried to disconnect and connection that worked with the AppStore, but still can not.

  ITunes does not allow a reconnect.

  Any help appreciated.

  Thank you

  Aurore

  Try the following steps:

  OS x: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  Advanced steps for fixing problems with iTunes Store - Apple Support connection

• My iTunes and AppStore locked permanently

  I create a id Apple 15 days ago and use to download apps two-step verification before two days I also activated my iTunes and AppStore Locke permanently at apple, I called 2 times known as my call to the Senior Adviser, then she told me your iTunes and AppStore Locke yo permanently can no longer use creat a new I download the round Apple about 200 the first day , she told me that our system detecting any unusual activity so your itume and AppStore locked permanently I also spent $ 50, what can I put now all help

  They told you why they had locked the account, which has been the "unusual activity"? Unless they agree to unblock the account, or possibly transfer the balance to a different account, there is no much you can do

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• music iTunes and apple screen problem

  Hello! This is my problem:

  

  music both itunes and apple for this. in the homepage of itunes, it will not show the scroll bar and the picture above is the page go. I dealt with this problem for a while. It is not a problem of update because this has happened during my last update (I 12.5.1). I tried to see if anyone else has this problem, but I couldn't find it at all.

  Thank you!

  This could be linked to the UI, DPI problem in 12.5.1.21. If your display is set to something other than 100%, the user interface is really messed up. If you can hold the tiny icons and microscopic text, then set your display to 100%, and the user interface will look 'normal '. This isn't a fix or a resolution, but it is a workaround.

• Updated iTunes and iOS and iPad Air no longer appears in iTunes

  Just updated iTunes and my iPad air no longer appears in iTunes.  Update of iOS on iPad and no change. iPad appears in information system as a USB device connected. Ideas?

  FWIW, my iPhone updated 6 Sy - the problem is only with my iPad Air