Ive used about 2 gb of 5.1 GB but my 4S says 0 bytes left. Any thoughts?

Similar Questions

• My Macbook Pro equipped of El Capitan system seems to use about 50% of my HD space!

  My Macbook Pro (mid-2015), El Capitan system seems to use about 50% of my disk space is this normal? So much so that I can't install updates of applications - y at - it something I can do?

  

  It's the State of the memory

• I did the screen too small (using about: config) and lost the address bar and all the menus. How to restore the display on a screen size can be used?

  I changed the size of display screen using about: config, as stated in the other answers help. After you use a value of 1.0, such as recommended, I've experimented with other sizes, because it seems small. I have entered a large number by chance (a typing error) and made the display so small that only a bug could read. And I lost all the features: bar address, menus, home, Favorites, settings icons.

  I uninstalled and reinstalled Firefox, thinking that this would fix it. But the new facility displays the same way: unreadable and no functionality.

  I found instructions on resetting to the factory settings, but cannot perform this task because I have to be able to access the menus to do so.

  Hello PaulaBob, have you changed the value of layout.css.devPixelsPerPx? -You can perform the following steps to change the still 'blind ': value

  1. Open firefox, and then press ctrl + L (this will focus in the address bar)
  2. type of topic: config
  3. Press ENTER twice
  4. type devpix
  5. Press the tab key
  6. Press enter
  7. type 1.0
  8. Press ENTER again and I hope you should be normal visibility now

• Use about: config in Firefox, is there a way I can fix it?

  This is the problem, really two problems:

  I've used about: config to set the layout.css.devPixelsPerPx (that you have answered the question someone else recently). I messed up, I was even warned on the screen. Instead of 1.0 for the Pixels by Px, I put dans.05. Something stupid to do, I know! So now my text is literally UNREADABLE, it is still too small to see it zoomed all the way, so I couldn't see the text in the topic: list of config to fix! I tried several times, but I couldn't read a bit. So I tried to uninstall keep all my old info, and he returned to the top of the same thing! What should I do?

  Hello Miraclesnow, you can perform the following steps to change the still 'blind ': value

  1. Open firefox, and then press ctrl + L (this will focus in the address bar)
  2. type of topic: config
  3. Press ENTER twice
  4. type devpix
  5. Press the tab key
  6. Press enter
  7. type 1.0
  8. Press ENTER again and I hope you should be normal visibility now

• Using a Vista laptop, connects to the internet, but will not load page. DNS problem.

  Hello.

  I use a Toshiba laptop with Windows Vista Home Premium 64-bit.

  I just have a modem and use a router. I have a network cable (cat 5) connected to my laptop and the modem. I have log-on internet and it connects. But when I open Google Chrome, IE9 or Firefox I can not load a web page. Google mentions something about the DNS cannot be found and DNS_Probe_Finished_No Internet.Frefox says server not found.

  I click on the Menu start - Connect To - I am logged in. I already typed my password in the command prompt and appropriate the pppoe connection/address (I use ADSL).

  I talked to my ISP and we tried to do certain things. But nothing works. On their end, it shows that I am connected. But I can't browse the internet. We tried to have the DNS and IP address for ipv4 set to obtain automatically and I put 2 numbers of DNS in manually once the settings have been changed to the favorite servers and DNS auxiliary, or worked.

  Using command prompt, the DNS has been emptied. It did not help. The modem has been reset the ISP location. I also recreated and set up a new network connection.

  My office is using the same pppoe information. I can freely browse the internet and I use Windows Vista Home Premium 32-bit. I was also shown to be connected simultaneously with both machines, but that the Office can go.

  I do not have Windows Update the laptop since on April 2016. It has not been used and the battery was empty. I tried to turn off the laptop several times, but nothing works.

  Y at - it suggestions to solve this problem? At that time perhaps a re - install will work.

  System Restore worked. I will run the updates and see what happens.

  I think it was a program that I uninstalled in programs and features.

  It's also useful information for this post: https://answers.microsoft.com/en-us/windows/forum/windows_7-networking/unable-to-connect-internet-dns-error-windows-7/72040e27-7a87-4f6f-88d6-9d158da38de8

  1.

  Note

  • You must open a command with elevated privileges prompt to complete the following steps. For more information, see command prompt: frequently asked questions

  1. Click the Start button.

  2. In the search box, type command prompt.

  3. In the list of results, right-click Guest, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. At the command prompt, type ipconfig/flushdns.

  2.

  Start - Search programs and files
  Type "Command Prompt".

  Right-click in the program file that appears above the run as administrator.

  ipconfig/flushdns

  ipconfig/registerdns

  ipconfig/release

  ipconfig / renew

• Just reinstalled Windows 8, which wiped the drive hard, but now it says my hard drive is using more than half of its capacity, although it should be nearly empty.

  The title says it all.

  I reinstalled windows 8 which apparently erased from my hard drive. After starting my computer upward even once, I noticed that I had free 826GBs of 1.81 on my hard drive (Local disk (c)), even if it should be almost empty. When I pointed out all the contents of my hard drive and go to properties of what he says his only help 114GBs of space, unlike what 'My Computer' told me.

  I noticed that a folder in the drive Local (c) entitled "Windows.old" which has my old program files that would make account 96GBs of used space. I tried to remove that but he told me that I needed permission from the "SYSTEM".

  I need help with this problem, I still have to put my old files on my computer, which I'm sure that will exceed the alleged free space I have. If anyone can help me, I'd appreciate a step by step explanation. I can handle a correct amount of talk about the computer, but a lot of it goes over my head.

  Thanks :)

  FORGIVE ME IF I PUT THIS UNDER THE WRONG TOPIC!

  Try this:

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-remove-the-Windows-old-folder

• About the RAM, I have 32 GB...... is there any advantage to allocate a large amount of this, or is there a limit that really MAKES a DIFFERENCE...?

  About the RAM, I have 32 GB...... is there any advantage to allocate a large amount of this, or is there a limit that really MAKES a DIFFERENCE...?

  @

  It depends on what you are doing and the rest of your system.  Eventually, if you like the video, it will impact.  But for still images, it is unlikely you will come anywhere close to that.  You can check it by placing the bar at the bottom left of the screen to show effectiveness.  As long as you use only RAM it will say 100%.  If you go below, you use your drive to work.  But even in this case, use to scratch a little, if you have an SSD, is not a big deal.

  Even my laptop 8 GB rarely gets bogged down (but I close the old files).  My 16 GB Office doesn't happen nearby.  But I'm not video.

• I have about 25 mail in my email application, but he needs more than 2 GB of memory

  I have about 25 mail in my email application, but he needs more than 2 GB of memory. What could be the reason. Thanks in advance

  You have email stored in the junk e-mail folders?

  If you do this may be the question that is being established.

  Max

• My USB to ethernet adapter works only if plugged into my MacBook Pro. I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports! Any suggestions?

  My USB to ethernet adapter works only if plugged into my MacBook Pro.

  I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!

  Any suggestions?

  Juice what 'expander' did you use?

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• I can't see the images received by using my Yahoo email in my MacBook Air, but I can see them in my iPhone 6, no idea why this is happening?

  I can't see the images received by using my Yahoo email in my MacBook Air, but I can see them in my iPhone 6, no idea why this is happening?

  Hello

  If you access your Yahoo mail via Mac Mail application, in the Mail menu bar, click Mail > Preferences , and then select the display tab to assure you that:

  Display remote messages HTML images is selected.

• I'm using Time Machine (1 TB), works very well, but because full starting to delete previous backups. Can I add another (LaCie 1 TB) HARD disk for backups? If so, how to proceed. Thank you!

  I'm using Time Machine (1 TB), works very well, but because full starting to delete previous backups. Can I add another (LaCie 1 TB) HARD disk for backups? If so, how to proceed. Thank you!

  You can add another drive to accept backups Time Machine... assuming it is correctly formatted for Mac to Mac OS extended (journaled), but things are not exactly "continue."

  You have not indicated if you intend to add the player to the USB port on the Time Capsule, or connect directly to your computer using USB or FireWire connections. Or the other method works, with the option to connect directly to the computer being the faster connection.

  Once the disc is added, you would go in Time Machine preferences (click the "clock" at the top of the screen on your Mac) to add the disk for Time Machine backups and delete the old Time Capsule disk, since backups will go is no longer this destination.

  Since you have a new drive, Time Machine will do a new full backup of your Mac and then go forward with incremental backups.

• Using Firefox 8.0.1, but welcome screen says that I do not use the latest vestion. Why?

  I've recently upgraded to Version 8.0.1 but when I launch Firefox home page tells me.
  You are not on the latest version of Firefox. Update today.
  When I open Firefox that says;
  "Firefox is updated.
  It doesn't seem to be the source of other problems, but something is clearly wrong.

  Hi aidanmac,

  Looks like you probably have the most recent version. I found this post by cor - el which explains what is happening:

  «This text on execution of is not the latest version of Firefox is hardcoded on the site www.google.com/firefox that previous Firefox used as well as the Google homepage seems not to want to keep this page more.»
  The current versions of Firefox is no longer use this site of Google as home page, but use the build-in on: home page as the home page.
  So Google assumes that you are using an older version of Firefox if you still visit this site and warns on the subject and invite you to update.
  You can use a different page than the homepage as subject: House or www.google.com or www.google.com/ig (iGoogle). »

• I use iphone 5 s updated to 9.2, but I can not use the network and call :( Please help me

  I use iphone 5 s updated to 9.2, but I can't use the network and call someone help me please

  What happens when you try to use the network?

• I want to use Windows Easy Transfer XP to my data, but the software said "computers are old computer."

  I want to use Windows Easy Transfer XP to my data, but the software said that "the two computers are old computer", how do I chanage the parameter in the new computer? In addition, two computers are running in Windows XP system, thank you.

  Thanks for answer you, it is really useful.

  But I have another question:
  Why Windows Easy Transfer is still a Windows XP version?

  Thank you.

  Because Windows Easy Transfer is designed to transfer data FROM a Windows XP computer TO Windows 7 (or Vista) computer.

  For example, you install Windows Easy Transfer on the computer Windows XP, but the output (if it is stored on external media or transmitted over a network connection or cable Easy Transfer) is used by the Vista or Windows 7 computer.

• I use Outlook as my main e-mail client, but I have access to my email address when I'm away from my computer with Hot Mail.

  I use Outlook as my main e-mail client, but I have access to my email address when I'm away from my computer with Hot Mail.
  When I do all of my incoming emails go to the "Deleted" folder instead of the "Inbox".
  Please notify.
  Bob Burns

  After all the Hotmail issues in the appropriate forum found here:
  http://windowslivehelp.com/