iwatch pairing problems

Similar Questions

• Pairing problems

  My watch disconnects frequently.

  When this happens the pairing does not work. Nothing happens.  I focus the camera on the watch and zilch

  Same thing with the hand, my watch does not appear on the iPhone 6 sec more

  Finally, always at home, I connect it by dragging the screen.

  It's driving me crazy. He is a recent problem. It worked fine for months.

  iOS 9.3.5 on Windows 7

  Hello

  It is not normally necessary to re - associate your watch when it is disconnected from your iPhone.

  If your watch become disconnected from your iPhone via Bluetooth, it will attempt to connect to a Wi - Fi network known as a relief.

  To check the status of the connection of your watch at any time, go to the eye of parameters:

  • When displaying the time on your watch, slide up on the screen, then swipe left / right for the look of parameters.
  • This will specify connected or disconnected:
    • If it says connected and the icon in the upper right corner is a green phone, your watch is connected to your iPhone via Bluetooth.
    • If it says connected, the icon is a green cloud, then your watch is disconnected from your iPhone via Bluetooth, but rather connected (as a backup) to a known Wi - Fi network.
    • If it is disconnected, your watch is disconnected from your iPhone and also is not connected to a Wi - Fi network. The icon in the upper right corner will be a red telephone with a line through it.
      • In these circumstances, the same disconnected icon appears at the top of your watch face:

  

  • Slide down again to return to the watch face.

  Bluetooth range is about 10 meters/33 feet. The actual range will vary in practice, but you may not need to have your iPhone on or just around maintain you for the watch the Bluetooth connection.

  Disconnections can be normal, happening whenever the watch loses the Bluetooth connection with the matched iPhone and no known Wi - Fi network is available.

  Note that there is a difference between your devices being "matched" vs them becomes temporarily "disconnected". Once they have been paired, the watch and the iPhone will remain paired until they are non-matched manually. However, they can become disconnected or connected (several times), while remaining always matched.

• iWatch health problem

  Hello

  I got my Apple iWatch for my birthday in November, I was carry on uninterrupted vibration since November. In February, I noticed a little swealing on my left wrist, it didn't hurt so I don't worry. The swealing grew, more every day, began to hurt a little bit, then I started to worry. I find this medical problem related to wear a smartwatch, I found only talk about some problems of radiation, which have not been confirmed. I started to check my health, I went to the doctor and found out that I developed a metacarpal synovial cyst due to microtrauma to the space. Wear my iWatch on vibration done this too me!

  Hello

  You don't talk to Apple here - it is a community of support based on the user.

  If you wish to contact Apple regarding your question, you can do so here:

  https://www.Apple.com/support/watch/contact/

  https://www.Apple.com/feedback/watch.html

• Speaker Bluetooth pairing problem Gen 4 ATV

  I have a 4 Gen AppleTV. Bluetooth pairing seems very delicate/sporadic. I can get it to pair with my Jabra headset move most of the time, but it does not connect with my Harmon Kardon Soundsticks speakers wireless (bluetooth). All my other Apple products connect flawlessly.

  Someone at - it similar problems? Suggestions?

  Thank you

  Jay

  Order items at the end of the use of Bluetooth accessories with your Apple TV (4th generation) - Apple supported

• MDR-AS600BT internet connection after pairing problem

  I have a huge problem. Whenever I connect immediately decreases my wireless headset mdras600bt with nfc/Bluetooth with my Tablet z3 Internet speed connection. Watch youtube in 720 p is impossible without a break and wait for it loading or buffering. While listening to spotify every time sone it stops him and says no connection.  I need tp désapparier headset turn off turn on wifi wifi and pair of hp again.

  It annoys me so... Is there something I can do at all? What is the Bluetooth killing WiFi?  I tried reseting the headset by pressing the reset for 15 seconds button, but it does not solve it.

  If there is no solution for it I might want to return the ch, because right now I had to disable the headset pairing because he kept saying no Internet connection on the browser...

  Sorry to hear that.

  It is normal that the performance of the Wi - Fi connection is affected when using bluetooth. This is because the Wi - Fi and bluetooth uses the same chip and antenna in the tablet. Bluetooth also uses 2.4 GHz as Wi - Fi. If your router/access point supports 5 GHz WiFi, I recommend that you go to this band.

  But it does sound a bit strange that performance is affected as much as describe you but it also depends on the router, other devices, and Wi - Fi networks in the same area. Can help change to another channel in the router/access point.

• Palm Pre and Jawbone 2 pairing problems

  I just bought a Jawbone 2 for my pre and I can't get the phone to recognize even I have fitted with a bluetooth device, let alone connect to it for a given period.  I have the piece of ear a few inches away from the phone and it keeps saying no devices.  Why is this so frustrating, that everything has to be a problem so far with this phone? I'm just glad, they got the EAS SSL question worked, but I have to use bluetooth and I don't understand why it does not work.  Fix this Palm or someone please let me know what to do.  Thank you.

  I have a jaw 2 and have no problem that the pairing so that never.

  Look here for putting the jaw bone in twinning mod.

  http://Aliph.custhelp.com/cgi-bin/Aliph.cfg/php/enduser/std_adp.php?p_faqid=143

  then search bluetoothe with pre devices.

  If it has not yet come there is probably a hardware problem in the pre or the jaw.

• Bluetooth pairing problems

  Hello everyone.

  I hope that I chose the right place for my question. So I have a diagnostic device that works using a Bluettoth SPP. It works fine on the Android device. BUT when I try to pair it with my BlackBerry 10 device I get the following error:

  There is no service to connect to on this device

  And 'connection' LED does not Flash on the device. Is there a limitation of use bluetooth? Also, I installed bluetooth spp sample on my device and I'm able to get information about the remote device as the address, class and so on.

  Any help would be appreciated.

  Thank you!

  So I asked Rob Williams of BlackBerry on this situation. He said, for devices of the PSP, it's normal. Once you use your application, everything works perfectly.

• 1DX / Windows 10 wired LAN pairing problems

  Since I updated to Windows 10 I can't my LAN WFT matching to work with my 1Dx.

  There is no report error code. After having reached the matching point in the Connection Wizard, the camera keeps trying to connect but never does.

  I tried to use the settings manual, but quickly realized I don't know what I'm doing.

  I think that maybe some Windows features necessary to achieve needs matches to be turned on manually - I know that the FTP server components are not installed by default.

  Of course, it's a major disaster, I like to use this technology and it has been one of the main points of sale of the camera for me.

  Any help much appreciated.

  OK, so it works 100% now. I was convinced that it was stable enough to use the EOS utility with a customer today and it didn't let me down. LAN high speed transfer all the way.

  Here are the settings I changed to get the camera to connect:

  -In the network and Internet / network and sharing Center / Advanced active profile sharing settings / private, I turned on the network discovery and automatic configuration of connected devices

  -In the Windows Firewall, I turned on permissions for EOS Utility 3 and Canon EOS UPNP detector in bot profiles private and pubic.

  It took a bit of trial and error but I am happy to have the operation of the system.

  For the guy Canon CPS who kept going on the FTP mode and how I should contact Microsoft (and soon to be Googling this page every day that people update Win10): you're welcome.

• I can't unlock the iWatch to reset.

  My problem is I can't unlock the iWatch to reset.  I made matching the iPhone but the iWatch is always asking me to unlock the iPhone.  How to unlock and not matched iWatch?

  < post branched out by host >

  Another piece of information.  I have not matched the iPhone/iWatch because I could not unlock the iWatch.  The pairing seemed to be broken, even if she showed the iWatch pairs from the phone.

• Apple Watch is no longer display of contact names - only the phone numbers on the texts and phone calls

  PROBLEM: When I receive an SMS or a phone call on my IWatch, it now shows only the phone number or e-mail address of the sender, rather than their names.  At the same time my IPhone matched 5 c displays the names of my contacts perfectly list view text message or phone call.  This problem just started occurring in the past week.

  CAUSES: unknown - it worked one day and the next day it didn't.  I don't remember edit particular parameter associated with it. Although my circle of friends on the IPhone appears differently now, too, without the my change.

  TROUBLESHOOTING: I turned off my Iphone, tried resetting, powering my iwatch and checked the settings for the IWatch on my Iphone and my Iphone settings.

  PRODUCTS: My software on my Iwatch says it's updated: OS 2.2.1.

  My Iphone's software is also updated: IOS 9.3.2

  My sister is also having the same problem with his Iwatch paired with a phone SE 5.

  I wonder if this is a recent development and how to fix it.

  Hello

  It can help restore your sync data:

  • On your iPhone, in the application of the watch, go: Watch My (tab) > general > reset > tap reset sync data.
    • Nothing seems to happen when you tap it, but the process will be executed in the background, invisible to you, so allow a few moments it ends.

  If you have not already done so, you can also activate iCloud Contacts:

  • On your iPhone, go to: settings > iCloud - turn on the Contacts.

• Can I delete my old Firefox sync account if I have a new one that uses the same email address?

  Hello

  I took off all my devices a synchronization of the old account and set up a new synchronization. In this process, I used the same as before email address.
  I have no use of my old account of synchronization, so the question is:
  Can I remove the old account from synchronization (via https://account.services.mozilla.com/ ) and - implicitly - all associated data without affecting my new account of Firefox (and its data) somehow?

  Thank you!

  Even if you use the same email address the two synchronize the old and the new are separated. As long as you are sure that all devices use new synchronization then the old one is no longer necessary.

  Here is the main article for help on the new sync

  • Synchronize your bookmarks Firefox, history, passwords, etc.
    • https://wiki.Mozilla.org/identity/Firefox-accounts
    • The methods used to identify you and to verify the details are quite complicated, with synchronization of the former using coupling codes, as explained in detail in these articles on cryptography in sync
      https://blog.Mozilla.org/Warner/2014/04/02/pairing-problems/
      https://blog.Mozilla.org/Warner/2014/05/23/the-new-sync-protocol/
    • Easier reading on the new sync https://blog.mozilla.org/services/2014/02/07/a-better-firefox-sync/
      And more techie information https://github.com/mozilla/fxa-auth-server/wiki/onepw-protocol
  • This applies to the new sync
    Why can't I synchronize my passwords?
    This is a problem of security and may be overcome in a future version of Firefox or synchronization. It is one of the reasons for some users can stay on the synchronization of the former. Both versions offer slightly different regarding how and what features they will sync.

• How do I pair iwatch already paired with beats

  How do I pair previously associate iwatch with beats.

  Hello

  To pair the Bluetooth headset with your watch to listen to the music of the synchronized playlist, check that you have set your Bluetooth headset in discovery / pairing mode (refer to the manufacturer's instructions) and you follow the instructions here:

  • Use the Bluetooth with your Apple Watch - Apple Support Accessories

  You will find that you must first disable pairing your headphones for your iPhone (or any other device that they can already be coupled to) until you can pair it with your watch.

  More information:

  Listen to music on your Apple Watch - Apple Support

• How do I pair iwatch with two phones? I have updated to 3.0

  How do I pair iwatch with two phones? I have updated to 3.0

  Hello

  More than one Apple Watch can be coupled to a single iPhone, but a single Apple Watch cannot be combined with more than an iPhone at some point.

• I phone 5 c I have problems using Bluetooth pairing with car radio/phone (9.3.3)

  I have difficulties to use the Bluetooth on my phone i 5 c with my car radio/phone and I pads. It was working fine until today (July 20, 2016). I tried to turn off the phone, re-start the phone and also deleted the items matched, but goes on to say "the connection failed". I've also updated the phone to 9.3.3. But still unable to pair anything with my i phone 5 c

  Hi Charley777!

  I understand that you are having problems with your iPhone Bluetooth function.  It is important to have your iPhone Bluetooth works properly, so I'm pleased to offer you a few resources.  Here are two articles of support with troubleshooting steps.  The first is specific to the car stereo coupling, and the second applies to other Bluetooth devices.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch

  Thank you for using communities of Apple Support.

  See you soon!

• Iwatch not pairing with my IPhone 4S

  I got an iwatch as a gift, but I can't use it because I don't have an IPhone 5.  Is it possible to pair it with my IPhone 4S?  my gift I useless at this point.

  Hello

  Sorry, not on an iPhone 4S...

  • To pair your Apple Watch, you need an i5 or higher and the latest version of iOSphone.
  • On your iPhone, go to settings > Bluetooth and make sure Bluetooth is on.
  • Make sure that your iPhone is connected to the Wi-Fi or a cellular network.
  • Turn on your Apple Watch a long press of the side button next to the digital Crown until you see the Apple logo.
  • Make sure that both devices are charged and keep them close together like you pair and synchronize.

  Set up your Apple Watch