1DX / Windows 10 wired LAN pairing problems

Similar Questions

• Satellite C870-1J6 wired LAN DHCP problems

  Hi all

  Here, I have a new laptop C870-1J6, which makes my life miserable. It won't start not reliable PXE, and the network card also does not start in Windows.

  On a cold start the PXE boot Gets an address dhcp fine most of the time, but a warm reboot fails most of the time.
  In windows this NIC also does not start. After five to ten minutes, he finally gets an address from the DHCP server. Rest of the network works fine.

  No points for guessing the manufacturer of the network card, of course, there a realtek :-(
  "RTL8102E/RTL8101E PCI Express Fast Ethernet controller.
  PCI ven: 10EC, dev: 8136

  None of the solutions, or can send Toshiba somehow? because I don't think I can do a lot on the PXE problem myself.

  At first, I have to say that I m really wondering why you have problems of LAN under Windows.
  Have you noticed these LAN issues from the first day of use?
  Are you using the original pre-installed OS that you got with your laptop or a facility clean or even company?

  Maybe stupid question, but I assume that LAN is set as first boot device, right?

• I have an ASUS M4A88TD-M/USB3 motherboard. The problem is that I can't find any windows 8 compatible LAN drivers for it.

  Problems of Windows 8 pilots.

  I just installed Windows 8 preview of developer on a virtual machine, I have an ASUS M4A88TD-M/USB3 motherboard. The problem is that I can't find any windows 8 compatible LAN drivers for it. All solutions?

  Given that Windows 8 has not been released yet not all drivers will work with him. Some drivers are very precise on the version of operating system, you may need to wait until they release the pilots of Windows 8 (if they make it to your model).

  If the drivers do not install, try their installation in compatibility mode.

  Troubleshoot Compatibility

  This can help with some (but not all the) programs/drivers:
  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.
  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.
  (3) after he set up see if it works properly. Note: some programs are perhaps not able to run in Windows 8.

• problem of bluetooth of Windows 8. Phone paired but unable to connect, says Windows phone in offline mode

  Problem of bluetooth of Windows 8. Phone paired but unable to connect, says Windows phone in offline mode

  Somasundaram Mohammed. Thank you for your help and maybe you will pass on the solution to all those in need. All that is necessary is to download Bluetooth Stack Toshiba 9.10 and run it. However be careful because version 9.0 of battery is not compatible. I have now my two Android phones connected.

  Thanks again

  John harney

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• WIRELESS and wired LAN do not know each other

  My internet provider installed a new cable modem, without capacity WIFI because I have an airport extreme base WIFI (with cable Express extensions).  Speed and quality are OK, wireless and wired, but there seems to be a wall of China between WIFI and wired (LAN): devices that are connected via a cable to my LAN are not visible from the wireless network and vice versa.  Airport extreme is not 'Bridge' mode ("because not of wireless on the new modem capability".)

  No idea of the reasons for this?  Thank you very much

  Sounds like the configuration of the device. With the airport devices it can operate as a device on the network or another firewall as its own network. I think that it is way jumpered to activate, this will allow you to configure the wireless on the airport, but your current router will do the DNS/DHCP and will be a single network.

  Now that you have configured as two routers on an independent network as there is no bridge.

• Wired LAN undetected on a Satellite U940 after installing Win7 Pro

  Hello

  After replacement of the HDD in the Satellite U940-100 and the installation of win 7 Prof 64 b the wired lan device is not detected. According to the documentation, there should be a 'Fast Ethernet LAN' in the U940.

  On the Toshiba support site, there is a Realtek driver available, but no luck. During installation a message appears: Realtek network controller was not found. The network cable is plugged in, but no led indicator. On the router the giga bit led will blink.

  There is no unknown device left in the 'management of the computer--> device manager'.

  Went LAN so where? Any suggestions?

  Thanks in advance,
  Frans

  > There is no unknown device left in the 'management of the computer--> Device Manager. "
  And what is stated in the network adapters? Realtek network card is listed there?
  This is really strange.
  Try to set the BIOS to default settings and check again.

• Satellite L650 - Windows detected a hard disk problem

  I have 9 as 4 months old satellite L650 that this microsoft Windows message keeps popping up. "Windows detected a hard disk problem, back up your files immediately to prevent the loss of information... etc" have I not a bum hard drive or is it a mistake?
  I have
  have the media discs to recover and this means that I have to reformat the HARD drive and try again. !

  Hi watthhel,

  I think the error message must be correct to Windows 7 and you must do what tells you the message: immediately back up your data and replace the HARD drive with a new one. In your case I would never save important files on the HARD drive. Too risky to lose important files

  Your laptop is 4 months old and that would mean it s covered by the warranty. Contact your local authorized service provider and ask for a replacement drive. They will exchange it and the service is free. :)

• Windows Media Player encountered a problem while playing the file. (MPEG)

  Windows Media Player encountered a problem while playing the file. (MPEG)

  Don't know why Windows Media Player does not accept your mpeg.

  Just a suggestion:

  Use a video converter and change your mpeg to wmv format and read it.

  If you don't have a video converter, google for a free Converter. No need to buy a.

  You can also install VLC media player.
  It's free.
  He plays almost all kinds of formats.
  It is widely used and recommended.

  If you are interested, here is the link:

  http://www.videolan.org/VLC/

• How do you get the beta version of windows 7 to solve the problem created when the auto update 0x0000c1f5 ran?

  How do you get the beta version of windows 7 to solve the problem of stop 0x0000c1f5 windows vista home edition created when the automatic update ran?

  Previous discussions about the error: ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package.

  Original title: I'm loading Quciktime.

  When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. "How to do this?

  Hi Tonyb13apb,

  ·         The issue is limited only during the installation of QuickTime?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Uninstall and reinstall QuickTime and check.

  http://support.Apple.com/kb/HT1925

   

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

   

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  a. click Start, select run.

  b. type msconfigand click OK.

  c. the system dialog Configuration utility appears.

  d. click on the general tab, click Normal startup - load all services and device drivers and then click OK.

  e. When prompted, click on restart to restart the computer.

  If the problem persists, you can contact Apple support for more help and information.

  http://support.Apple.com/kb/HE57

  Let us know if it helps.

• XP wired network printing problems, wireless connection is OK

  I'm trying to print on a printer to network corp.  He previously worked.  All network printers indicate unable to connect.  This happens when on the wired LAN.  When the wireless LAN Corp., printers are ok and I can print.  I checked the Printer Spooler service and the indications are that it works ok.

  Hello

  Thanks for asking this question to Microsoft Community.

  I would recommend posting your query in the TechNet Forums. The community of IT professionals in the following TechNet forum will be able to help you the best.

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• HP Pavilion g7-2010ne Notebook pc Windows detected a hard disk problem

  Hello

  I have a HP Pavilion g7-2010nr Notebook pc and two nights ago, I got a message saying "Windows detected a hard disk problem" and how do I back up my data and then repaired. So I tried it to my WD My Passport 500 GB external hardrive but as soon as he gets as 57% when the reverse said it will create a file system image, the backup fails I tired it three times to try different solutions I found on the help forums, but nothing helps and I don't know if maybe it's because the hard drive problem or another problem. Any suggestions are welcome.

  You can back up by using HP Recovery which should not have problems:

  This should help you:

  http://support.HP.com/us-en/document/c03489643

  You can stop it anytime before restoration starts if you encounter any problem.

• Repair Windows scam - cannot control panel access control or workstation "Windows Explorer has encountered a problem and needs to close."

  Original title: repair Windows scam - Can can't Access Control Panel or workstation

  My system has been recently infected with "Windows" repair"virus. I managed to delete using Super Anti-Spyware, but all my desktop shortcuts are gone (hidden) so I downloaded "Unhide.exe" and get all my shortcuts. Most of them seems to be working as before, but there are a few, such as 'My Computer', ' Panel, "My Documents", or even "Windows Explorer", which I can't access.» When I try to open them, I get this popup box saying "Windows Explorer has encountered a problem and needs to close" how much he out me of my office of kicks.

  Any suggestions?

  Thank you!

  Brian

  The best way to solve this maybe just create a new user account, transfer your personal data to this account, and then delete the old account. Make sure that you perform the system restore after you did the new account and everything works fine. To purge the system restore, simply disable it then again. Be aware that the creation of a new user account is not the means to get rid of malware. But it is perhaps the best way to get rid of some of the after effects. However, I recommend you scan with Malwarebytes before running these instructions. After scanning you may not create the new account.

  In addition, Jose is correct. Good number of new forms of malware prevent the start in safe mode. Trying to force booting in SafeMode with msconfig, you end up with a boot loop.

• When I click on a video file in Windows Explorer, I get the message "not found xvidcore.dll', shortly followed by the message" Windows explorer has encountered a problem and needs to close. "

  original title: xvidcore.dll not found.

  Nice day

  When I click on a video file in Windows Explorer, I get the message "not found xvidcore.dll', shortly followed by the message" Windows explorer has encountered a problem and needs to close. "  The screen becomes blue white.  I am operating Windows XP SP3.  Any advice much appreciated

  Thank you, Brian Newman

  No guarantee, but it might be interesting to try to download
  and install the XviD Codec:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  XviD Codec
  http://www.xvidmovies.com/codec/
  (name of the file to download: Xvid - 1.3.2 - 20110601.exe)

  Good luck...