Pairing problems

My watch disconnects frequently.

When this happens the pairing does not work. Nothing happens.  I focus the camera on the watch and zilch

Same thing with the hand, my watch does not appear on the iPhone 6 sec more

Finally, always at home, I connect it by dragging the screen.

It's driving me crazy. He is a recent problem. It worked fine for months.

iOS 9.3.5 on Windows 7

Hello

It is not normally necessary to re - associate your watch when it is disconnected from your iPhone.

If your watch become disconnected from your iPhone via Bluetooth, it will attempt to connect to a Wi - Fi network known as a relief.

To check the status of the connection of your watch at any time, go to the eye of parameters:

  • When displaying the time on your watch, slide up on the screen, then swipe left / right for the look of parameters.
  • This will specify connected or disconnected:
    • If it says connected and the icon in the upper right corner is a green phone, your watch is connected to your iPhone via Bluetooth.
    • If it says connected, the icon is a green cloud, then your watch is disconnected from your iPhone via Bluetooth, but rather connected (as a backup) to a known Wi - Fi network.
    • If it is disconnected, your watch is disconnected from your iPhone and also is not connected to a Wi - Fi network. The icon in the upper right corner will be a red telephone with a line through it.
      • In these circumstances, the same disconnected icon appears at the top of your watch face:

  • Slide down again to return to the watch face.

Bluetooth range is about 10 meters/33 feet. The actual range will vary in practice, but you may not need to have your iPhone on or just around maintain you for the watch the Bluetooth connection.

Disconnections can be normal, happening whenever the watch loses the Bluetooth connection with the matched iPhone and no known Wi - Fi network is available.

Note that there is a difference between your devices being "matched" vs them becomes temporarily "disconnected". Once they have been paired, the watch and the iPhone will remain paired until they are non-matched manually. However, they can become disconnected or connected (several times), while remaining always matched.

Tags: Apple Watch

Similar Questions

  • Speaker Bluetooth pairing problem Gen 4 ATV

    I have a 4 Gen AppleTV. Bluetooth pairing seems very delicate/sporadic. I can get it to pair with my Jabra headset move most of the time, but it does not connect with my Harmon Kardon Soundsticks speakers wireless (bluetooth). All my other Apple products connect flawlessly.

    Someone at - it similar problems? Suggestions?

    Thank you

    Jay

    Order items at the end of the use of Bluetooth accessories with your Apple TV (4th generation) - Apple supported

  • MDR-AS600BT internet connection after pairing problem

    I have a huge problem. Whenever I connect immediately decreases my wireless headset mdras600bt with nfc/Bluetooth with my Tablet z3 Internet speed connection. Watch youtube in 720 p is impossible without a break and wait for it loading or buffering. While listening to spotify every time sone it stops him and says no connection.  I need tp désapparier headset turn off turn on wifi wifi and pair of hp again.

    It annoys me so... Is there something I can do at all? What is the Bluetooth killing WiFi?  I tried reseting the headset by pressing the reset for 15 seconds button, but it does not solve it.

    If there is no solution for it I might want to return the ch, because right now I had to disable the headset pairing because he kept saying no Internet connection on the browser...

    Sorry to hear that.

    It is normal that the performance of the Wi - Fi connection is affected when using bluetooth. This is because the Wi - Fi and bluetooth uses the same chip and antenna in the tablet. Bluetooth also uses 2.4 GHz as Wi - Fi. If your router/access point supports 5 GHz WiFi, I recommend that you go to this band.

    But it does sound a bit strange that performance is affected as much as describe you but it also depends on the router, other devices, and Wi - Fi networks in the same area. Can help change to another channel in the router/access point.

  • Palm Pre and Jawbone 2 pairing problems

    I just bought a Jawbone 2 for my pre and I can't get the phone to recognize even I have fitted with a bluetooth device, let alone connect to it for a given period.  I have the piece of ear a few inches away from the phone and it keeps saying no devices.  Why is this so frustrating, that everything has to be a problem so far with this phone? I'm just glad, they got the EAS SSL question worked, but I have to use bluetooth and I don't understand why it does not work.  Fix this Palm or someone please let me know what to do.  Thank you.

    I have a jaw 2 and have no problem that the pairing so that never.

    Look here for putting the jaw bone in twinning mod.

    http://Aliph.custhelp.com/cgi-bin/Aliph.cfg/php/enduser/std_adp.php?p_faqid=143

    then search bluetoothe with pre devices.

    If it has not yet come there is probably a hardware problem in the pre or the jaw.

  • iwatch pairing problems

    whenever I ping my iwatch to confirm the connection with my iphone5 it doesn't

    connect automatically.

    Hello

    It is possible to ping to your iPhone from your watch, but not ping your watch from your iPhone.

    To help troubleshoot connectivity problems, if you don't have yet done, update your Apple Watch iPhone to the latest version of the software, from your iPhone:

    For optimal performance of your watch, also keep both Bluetooth and Wi - Fi enabled at all times on your iPhone:

    • Phone: Settings > Bluetooth - on.
    • Phone: Settings > Wi - Fi - on.

  • Bluetooth pairing problems

    Hello everyone.

    I hope that I chose the right place for my question. So I have a diagnostic device that works using a Bluettoth SPP. It works fine on the Android device. BUT when I try to pair it with my BlackBerry 10 device I get the following error:

    There is no service to connect to on this device

    And 'connection' LED does not Flash on the device. Is there a limitation of use bluetooth? Also, I installed bluetooth spp sample on my device and I'm able to get information about the remote device as the address, class and so on.

    Any help would be appreciated.

    Thank you!

    So I asked Rob Williams of BlackBerry on this situation. He said, for devices of the PSP, it's normal. Once you use your application, everything works perfectly.

  • 1DX / Windows 10 wired LAN pairing problems

    Since I updated to Windows 10 I can't my LAN WFT matching to work with my 1Dx.

    There is no report error code. After having reached the matching point in the Connection Wizard, the camera keeps trying to connect but never does.

    I tried to use the settings manual, but quickly realized I don't know what I'm doing.

    I think that maybe some Windows features necessary to achieve needs matches to be turned on manually - I know that the FTP server components are not installed by default.

    Of course, it's a major disaster, I like to use this technology and it has been one of the main points of sale of the camera for me.

    Any help much appreciated.

    OK, so it works 100% now. I was convinced that it was stable enough to use the EOS utility with a customer today and it didn't let me down. LAN high speed transfer all the way.

    Here are the settings I changed to get the camera to connect:

    -In the network and Internet / network and sharing Center / Advanced active profile sharing settings / private, I turned on the network discovery and automatic configuration of connected devices

    -In the Windows Firewall, I turned on permissions for EOS Utility 3 and Canon EOS UPNP detector in bot profiles private and pubic.

    It took a bit of trial and error but I am happy to have the operation of the system.

    For the guy Canon CPS who kept going on the FTP mode and how I should contact Microsoft (and soon to be Googling this page every day that people update Win10): you're welcome.

  • Can I delete my old Firefox sync account if I have a new one that uses the same email address?

    Hello

    I took off all my devices a synchronization of the old account and set up a new synchronization. In this process, I used the same as before email address.
    I have no use of my old account of synchronization, so the question is:
    Can I remove the old account from synchronization (via https://account.services.mozilla.com/ ) and - implicitly - all associated data without affecting my new account of Firefox (and its data) somehow?

    Thank you!

    Even if you use the same email address the two synchronize the old and the new are separated. As long as you are sure that all devices use new synchronization then the old one is no longer necessary.

    Here is the main article for help on the new sync

  • I phone 5 c I have problems using Bluetooth pairing with car radio/phone (9.3.3)

    I have difficulties to use the Bluetooth on my phone i 5 c with my car radio/phone and I pads. It was working fine until today (July 20, 2016). I tried to turn off the phone, re-start the phone and also deleted the items matched, but goes on to say "the connection failed". I've also updated the phone to 9.3.3. But still unable to pair anything with my i phone 5 c

    Hi Charley777!

    I understand that you are having problems with your iPhone Bluetooth function.  It is important to have your iPhone Bluetooth works properly, so I'm pleased to offer you a few resources.  Here are two articles of support with troubleshooting steps.  The first is specific to the car stereo coupling, and the second applies to other Bluetooth devices.

    Help to connect your iPhone, iPad or iPod touch with your car radio

    Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch

    Thank you for using communities of Apple Support.

    See you soon!

  • Sprocket: My gear don't power down and can not pair on my mobile device. How to solve this problem?

    Hey everybody,

    My pinion don't power down and can not pair on my mobile device.  How to solve this problem?

    Thank you

    Bill

    Hi Bill,

    This should solve your problem!

    1. Locate the reset button near the port of loading.

    2. Insert gently a needle into the reset button access point and press the reset for 3 seconds button.  Resetting the printer and everything already illuminated turn off the LED.

    3. turn on the printer by pressing the power button until the white LED lights

  • HP Pavilion Notebook - 17-f125: HP TOUCH FOR MOUSE HP PAVILION 17.3 PAIR CONNECTIVITY PROBLEM

    I have the HP touch and pair of mouse and the laptop can not find it... What can I do?  I press the bluetooth button.  on the mouse and a analysis of the laptop new devices and I get nothing.  Help!  I can not even find the option bluetooth on your laptop to see if it is enabled or disabled.  I used help on the laptop... did not help

    @suitestorm1 ,

    Hello and welcome to the forums HP support thank you for posting.  Heres are some links for you so that you can provide us better so that we can help you better.

    The question of best.

    Complete model and product number.

    Please provide your operating system.  The reason why we are looking for the product number must match your exact product.

    Now for your problem of bluetooth.  This next links will help in solving the problems of bluetooth.

    Using Bluetooth (Windows 8) devices

    Understand and troubleshoot Bluetooth wireless technology (8.1 Windows, 8, 7, Vista, XP)

    One thing that I would try before anything is trying to connect to your bluetooth device to another system to see if it works on another system as well.

    Please let me know how it goes.

    Thanks again for posting and have a great day.

  • iPhone SE & 6 problems with Apple Watch of pairing

    My iPhone 6 has done and continues to pair with Apple Watch; However, it will pair with the iPhone OS. It will start to pair up with the SE, but when you select the prompt to "Apple Watch configuration" message then indicating there is no pair. I have re-paired and unpaired with my iPhone 6 without any problem, so that tells me that there is a problem SE. I can pair the SE with my car and my macbook and I have no problem.

    Everyone knows this? I spoke with the Apple Support by phone, and we could not even solve the problem.

    I started having this problem with my new iPhone SE. The Apple Watch already associated with my iPhone 5 and just improved to the SE. worked for about a week and matching seems to have started to somehow lose the connection. I can see the bluetooth icon on the iPhone lighting several times as if detected his watch but nothing. I'm trying to pair with the camera on the iPhone and place the watch in the viewfinder does nothing, it does not detect read / that sound here. I also did the manual of twinning with the code and the code never happened on the watch. I even reset the watch and phone and nothing.

    Someone at - it advice? I'm all ears.

  • I am so tired of this bluetooth problem on my iPhone 6.  I am updated to iOS 9.3.  Anything I pair with my iPhone must be within 6 "of the phone.  What should I do?

    I am so tired of this bluetooth problem on my iPhone 6.  I am updated to iOS 9.3.  Anything I pair with my iPhone must be within 6 "of the phone.  What should I do?

    looks more like a hardware delivers then one software

  • Problem Pairing device: Bluetooth virtual keyboard (VKB) detection of service failed

    Hi, I could use help to determine the cause and the solution to a problem I have. I want to associate this with my Toshiba Tecra M4-S435 keyboard. The laptop has an internal module installed, "Cambridge Silicon Radio, LMP (V: S) 02:0490." I installed the last 5.10.01 (T) BT stack. I have several other paired devices, but this one is the original questions.

    The unit is in the discovery as a keyboard VKB (it supports HID and SPP); I want to use the HID profile. In the authentication dialog, the VKB beeps, who is his warning that a PIN can be typed into the unit, but to hit the enter key, a dialog box informs me that "Detection of Service Failed". I've seen similar problems posted on the manufacturer's website, but I have not seen any resolution.

    Any help is greatly appreciated.

    Hello

    I m not an expert from BT, but if you have several other devices with your laptop coupled, then everything is ok with your Tecra M4 BT stack and the machine.
    It seems that there is a compatibility problem with your external virtual Bluetooth keyboard.

    Either the Toshiba BT stack does not support this VBK and service or the firmware of this device allows a few worries
    However, in case I would recommend contacting manufacturing virtual Bluetooth keyboard for more details.
    Guys should more known on own products as simple Toshiba here users in the forum.

    Good luck

  • Problem about the iPhone 6 s MORE and Ford SYNC (Ford Ecosport) bluetooth pairing.

    Hello Apple community!

    I have an iPhone MORE 6s firmware iOS 9.2.1 running and a Ford Ecosport trend M/T (bought last March 2015).

    I always pair my iPhone with audio system in my car (Ford SYNC) every time I jump in my car every day. I drive 4 hours per day and I'm fond of listening to music with my iPhone through the car radio in my car. But while playing music a few days ago my iPhone just disconnected my car bluetooth device. I tried to pair it several times, but it keeps disconnecting. I switched to the USB mode (I always connect my iPhone to my car for the end of charge and also to listen to music when I want to disable my iPhone bluetooth), my iPhone is connected, but all I hear is static, whenever I play music from my iPhone.

    I tried to delete my audio system phone master reset Ford SYNC and bluetooth devices list and also reset my iPhone, but it still shows the same results. I would appreciate anyone's response on what I live now.

    Thank you so much in advance!

    PS: I already upgraded my iPhone iOS firmware to 9.2.1 before that happened.

    Kind regards

    Marc

    Hello, m.asebo.

    It seems that you are having problems with your iPhone 6s more lose connection to the audio system of your car there. You did some great troubleshooting so far. Great job. The following Knowledge Base article offers up a few big steps to troubleshoot your iPhone:

    Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch

    First try these steps

    1. Make sure that your device iOS and Bluetooth Accessory are close together.
    2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
    3. Restart your Bluetooth accessory.
    4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
    5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPad, iPhone or iPod touch.
    6. Pairing the Bluetooth accessory, replace the accessory in detection mode, then pair and connectagain.

    If you still cannot match or connect your Bluetooth accessory

    Check with the manufacturer of Bluetooth to make sure that your accessory works with your iOS device. Contact the Apple Support if you have any of these problems:

    • You can't turn on Bluetooth or the setting is gray.
    • You cannot connect any Bluetooth accessories with your device.
    • The accessory manufacturer has confirmed that your accessory works properly.

    Thank you for reaching out to the communities of Apple Support.

    Kind regards.

Maybe you are looking for