Bluetooth pairing problems

Similar Questions

• Speaker Bluetooth pairing problem Gen 4 ATV

  I have a 4 Gen AppleTV. Bluetooth pairing seems very delicate/sporadic. I can get it to pair with my Jabra headset move most of the time, but it does not connect with my Harmon Kardon Soundsticks speakers wireless (bluetooth). All my other Apple products connect flawlessly.

  Someone at - it similar problems? Suggestions?

  Thank you

  Jay

  Order items at the end of the use of Bluetooth accessories with your Apple TV (4th generation) - Apple supported

• iOS 9.2 bluetooth pairing

  Does anyone else's problems do with Bluetooth pairing once upgraded to iOS since iOS 9.1 9.2? As soon as I made my Garmin Forerunner 630 was no longer able to communicate with my iPhone 6 (Note: it worked perfectly, while running iOS 9.1 before nightfall iOS which should be upgraded).

  Measures taken to try to resolve the problem

  1. Forget the camera and rematching. This has compounded the situation - the iPhone could not 'see' the device to try to match.
  2. Pairing my Garmin 630 with a friend (Android based) phone - it works immediately - he can see the Garmin and cannot pair it, no problem.
  3. My Garmin 630 with my iPad Air matching - the iPad is also running iOS 9.2 and he too can not even 'see' the device.
  4. Pairing my iPhone 6 and iPad in the Air with a bluetooth (EU Boom) speaker - it works.
  5. Complete reset of my iPhone 6. Twinning with 630 Garmin still does not work.
  6. Reset complete my Garmin 630. No change.
  7. Following the advice of Apple here: Wi - Fi and Bluetooth: potential sources of interference wireless - Apple Support

  Conclusion

  In summary, it seems that Bluetooth still work on the Garmin 630 and the iPhone and the iPad, but Apple has made some sort of change in 9.2 iOS that prevents matching with certain types of Bluetooth device.

  Similar reported problems

  I've seen a few similar reports on support for other devices forums (not "seen" / "detectable") after the upgrade to iOS 9.2:

  Does not connect via Bluetooth, iOS 9.2 to my home theater of sonny,

  Since iOS 9.2 my Bluetooth PlayStation keyboard no longer works

  iPhone 5 sec bluetooth not working after iOS 9.2

  as well as more general questions of Bluetooth for devices that are already paired:

  No bluetooth after 9.2

  iPhone 5 sec bluetooth not working after iOS 9.2

  iCade/bluetooth controller + iOS 9.2

  None of the posts that i reference above gives no real solution.

  Questions

  1 Apple Please recognize that there is a problem with iOS 9.2 on Bluetooth?

  2 - is anyone else seeing problems similar to what I reported and the posts that I've referenced?

  Problem solved, a bit of a schoolboy error.

  For some reason, the iOS to 9.2 upgrade means that the phone and the Garmin 630 were no longer able to communicate. Try to pair again via the iOS Bluetooth settings screen did not work (the unit has not appeared).

  It seems that matching works only if launched from the Garmin Connect app works on the iPhone / iPad. Once you have coupled the app will Garmin 630, then appear in the Bluetooth settings screen standard iOS, showing as connected.

  In summary:

  (1) not all Bluetooth devices will not necessarily be available for matching in the iOS Bluetooth settings screen (didn't know it until now), and

  (2) previously associated device no longer works after update iOS. Not a huge problem, but a bit annoying.

• HP ENVY 17-j113tx TouchSmart: Bluetooth paired but NOT connected to the device

  Bluetooth paired but NOT connected to the device - question - Upload of files from device to PC fails.

  Description of the problem
  
  

  • Download a file from PC (Win10 x 64) for Android phone has worked well.
  • Download the same file from the phone on PC (Win 10 x 64) - FAILURE.

  Someone knows how to deal with this issue, provide a work around...?

  I have way too much time on my hands right now...!

  Treatment

• Android Bluetooth paired with my laptop that Bluetooth was grayed out (NOT the ability to Exchange files)

  Hello

  Connection Bluetooth to an Android mobile with Bluetooth in HP laptop has failed

  I followed these steps to pair the Bluetooth to my HP laptop and the other Bluetooth Android.

  
  First: I clicked on "Add" device "." Second, the Android mobile Bluetooth showed up. Then I connected to it. After that, "Comparing matching Codes" shown to me. (Screenshot below)
  

  Next: The user of each Bluetooth accepted us as confirmation. Finally: The pair has been established well. (Screenshot below):

  

  Although Bluetooth Android was paired with my laptop HP My Bluetooth successfully, the Bluetooth Android is grayed out on my my list of Bluetooth mobile phone as shown in the screenshot below:

  

  Whenever I clicked on the Android Bluetooth listed in my Bluetooth devices, I don't got no control Bluetooth shows me (NO way to send files from Android Bluetooth appears dimmed) also, whenever the user who has the mobile phone android trying to send file in my laptop Bluetooth paired with its Bluetooth Android, it has encountered an error in sending do not file.

  Although the Android Bluetooth is enabled to be detected by other Bluetooth devices.  If there is a problem with my laptop Bluetooth, then I would be facing the same problem with connecting (pairing) my laptop Bluetooth with Nokia Bluetooth.

  Second: A Nokia mobile with the computer HP Bluetooth Bluetooth laptop was successful:

  I followed the same steps to connect Nokia Bluetooth for my laptop Bluetooth, and he was successful.

  

  Then windows checked drivers for Nokia Bluetooth.

  

  

  Then the control of Bluetooth has been illustrated that will allow to me and the other a user send and receive files via Bluetooth pairing:

  

  NOTE THE DIFFERENCE BETWEEN a connection NOKIA BLUETOOTH WITH MY BLUETOOTH, AND ANDROID BLUETOOTH WITH MY COMPUTER PORTABLE BLUETOOTH LAPOTP):

  1. There is no verification windows drivers for the moment got sync to my laptop Bluetooth Bluetooth Android. However, there is a windows drivers for Nokia Bluetooth control when it is obtained associated with my laptop Bluetooth.

  

  2 - THE NOKIA IS NOT CLOTHING OUT(active/enabled), HOWEVER, THE ANDROID IS GRAYED OUT (inactive/disabled)

  

  I hope you understand the answer for me and me.

  Hello

  I suggest you post your query on the HP forums to get information on the numbers of care for the HP customer for your location because we have no details for him.

  HP Support Forums

  http://h30434.www3.HP.com/

  I hope this helps.

• Treo 700wx bluetooth pairing w / Motorola IHF1000 - help please!

  Recently, I upgraded my Treo 700wx at the exit of the 1.24 firmware for Verizon Wireless. In the process, I lost the bluetooth pairing with my Motorola IHF1000 that was active before the upgrade. I was able to pair the phone with a handsfree Acura and my Lenovo computer system - I have questions only with the IHF1000 Motorola.

  The phone sees the hands of peripheral free Motorola during the match but when I enter the access code (1234), the synchronization fails.

  Someone at - it suggestions?

  You will not be able to reinstall the patch because the unit will return with an error message saying that it is already installed. It is indeed good to do a hard reset after an update anyway. I really hope it solves your problems, and I'm sorry for the inconvenience.

  Message is about: Treo 800w (Sprint)

• Several devices on Stream 8 Bluetooth pairing

  Hello

  I just wanted to know if its possible to pair 2 or several devices such as the mouse Bluetooth and a Bluetooth keyboard on stream 8 and simultameously work on both?

  Kind regards

  Hrishikesh

  Hello

  Keyboard and mouse Bluetooth Bluetooth work wonder, at the same time.

  I have HP Bluetooth keyboard T800 paired with 8 HP flow, just got one case iBall mouse tried bluetooth pairing with 8 Stream and here we go!

  Keyboard and mouse are paired and works like charm.

  More importantly, I have my free to load usb microphone, USB key, etc..

  Almost want to mini computer, mouse and keyboard, extremely portable and easy to carry.

  Kind regards

  Hrishikesh.

• Service error battery Bluetooth connection problem and "Bluetooth Control: an error occurred during initialization of this operation." Try restarting your computer or bluetooth device ".

  Original title: Bluetooth connection problem

  I have a bluetooth Jawbone headset which worked fine with my Dell studio 1458 until a month or two ago. I am running windows Home premium 64-bit. Now the device will connect is more to the laptop. I get an error to the stack service and "Bluetooth Control: an error occurred during initialization of this operation." Try restarting your computer or bluetooth device"I returned to you can restore point, but the issue is not resolved. All solutions?

  Hi Trainfan1,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Run the tool and troubleshooting hardware devices.

  Method 2: Check the drivers and the Bluetooth Support service.

  (a) click Start, type services in start search box and press enter.

  (b) Services for window open find Bluetooth Support Service and double-click it.

  (c) ensure that the service is both the value Automatic for Startup type and started for the State.

  (d) click Start, type Device Manager in the start search box and press enter.

  (e) to search for the Bluetooth device expand it and double click on the driver.

  (f) go to the tab driver and click set to update driver to update the drivers.

  (g) if the problem is still even try to Uninstall and reinstall the drivers in the same tab by clicking on the option Uninstall .

  Method 3: Remove all Bluetooth components and reinstall it from the manufacturer's Web site.

  Install all necessary software required for Bluetooth device work properly.

• BlackBerry Smartphones Bluetooth pairing Helper for "BOLD"

  I'm trying to pair my BB "BOLD" with my Land Rover Freelander 2. When I got a BB curve, I had to download a "bluetooth pairing assistance" where can I find this coupling of assistance based on "BOLD" of bluetooth?

  Hello.

  Here is the address of the page containing the link:

  Click here: pairing Bluetooth app

  Thank you

  Bifocals

• I phone 5 c I have problems using Bluetooth pairing with car radio/phone (9.3.3)

  I have difficulties to use the Bluetooth on my phone i 5 c with my car radio/phone and I pads. It was working fine until today (July 20, 2016). I tried to turn off the phone, re-start the phone and also deleted the items matched, but goes on to say "the connection failed". I've also updated the phone to 9.3.3. But still unable to pair anything with my i phone 5 c

  Hi Charley777!

  I understand that you are having problems with your iPhone Bluetooth function.  It is important to have your iPhone Bluetooth works properly, so I'm pleased to offer you a few resources.  Here are two articles of support with troubleshooting steps.  The first is specific to the car stereo coupling, and the second applies to other Bluetooth devices.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch

  Thank you for using communities of Apple Support.

  See you soon!

• Problem about the iPhone 6 s MORE and Ford SYNC (Ford Ecosport) bluetooth pairing.

  Hello Apple community!

  I have an iPhone MORE 6s firmware iOS 9.2.1 running and a Ford Ecosport trend M/T (bought last March 2015).

  I always pair my iPhone with audio system in my car (Ford SYNC) every time I jump in my car every day. I drive 4 hours per day and I'm fond of listening to music with my iPhone through the car radio in my car. But while playing music a few days ago my iPhone just disconnected my car bluetooth device. I tried to pair it several times, but it keeps disconnecting. I switched to the USB mode (I always connect my iPhone to my car for the end of charge and also to listen to music when I want to disable my iPhone bluetooth), my iPhone is connected, but all I hear is static, whenever I play music from my iPhone.

  I tried to delete my audio system phone master reset Ford SYNC and bluetooth devices list and also reset my iPhone, but it still shows the same results. I would appreciate anyone's response on what I live now.

  Thank you so much in advance!

  PS: I already upgraded my iPhone iOS firmware to 9.2.1 before that happened.

  Kind regards

  Marc

  Hello, m.asebo.

  It seems that you are having problems with your iPhone 6s more lose connection to the audio system of your car there. You did some great troubleshooting so far. Great job. The following Knowledge Base article offers up a few big steps to troubleshoot your iPhone:

  Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch

  First try these steps

  1. Make sure that your device iOS and Bluetooth Accessory are close together.
  2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
  3. Restart your Bluetooth accessory.
  4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
  5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPad, iPhone or iPod touch.
  6. Pairing the Bluetooth accessory, replace the accessory in detection mode, then pair and connectagain.

  If you still cannot match or connect your Bluetooth accessory

  Check with the manufacturer of Bluetooth to make sure that your accessory works with your iOS device. Contact the Apple Support if you have any of these problems:

  • You can't turn on Bluetooth or the setting is gray.
  • You cannot connect any Bluetooth accessories with your device.
  • The accessory manufacturer has confirmed that your accessory works properly.

  Thank you for reaching out to the communities of Apple Support.

  Kind regards.

• Keyboard Bluetooth pairing code problems

  I have a keyboard microsoft bluetooth keyboard 6000, after getting a blue screen that I lost the connection with the keyboard, when I try to associate the keyboard of my computer, the computer detects the keyboard, but as I go to the next screen, it immediately jumps to another screen that informs me that I need to use the code for pairing with the device. Why?

  Hi Freckles1,

  1 have you used the matching code provide with the mouse and check if it works?

  2. did you of recent changes on the computer?

  Pairing code is another term for a number that associates your computer with a Bluetooth compatible device. The security key terms and pairing code are often used interchangeably.

  Using authentication keys compatible Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-passkeys-for-Bluetooth-enabled-devices

  First, I would say that you are using the pairing supplied with the product code and check if it works.

  If the previous step fails then remove and then reinstall the device

  (a) click the Start button, select Control Panel, click hardware and soundand then click Bluetooth devices.

  (b) select the device that is not working, and then click Remove.

  (c) click Add, press the reset button on the unit (or make it discoverable following the manufacturer's instructions), check the box my device is set up and ready to be found and then click Next.

  (d) if the device is not found, repeat the previous step. When the device is found, select it, and then click Next.

  (e) follow the remaining instructions in the wizard.

  Make sure that the Bluetooth adapter for your computer is attached and turned on, and that the device is in use and detectable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.

  The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Number of Bluetooth pairing code problems

  When my attempts to laptop to pair with my cell phone it sends 6 phone numbers, but the numbers on my phone have a space in the middle to show two lots of three numbers... it is not accepted and matching fails... ideas?

  Thank you

  Paul.

  A update here... I persevered and succeeded now... I really have no idea why he finally accepted the code, I do not think I did something different... the mobile phone sent a code to six figures composed of two lots of three digits, the laptop displays the code as a continuous six-digit and apparently accepted... He gave no indication that he had accepted the code , but I was able to transfer files... previously, he had said that the code (with a space) is not acceptable!

  Thank you for you help anyway.

  Paul.

• Not HPI Bluetooth pairing

  I just iPhone7. Will pair with one of my Bluetooth devices. Already attached to, iphone 5 s no, problem. Apple support cannot help?

  Even if you just got the iPhone, make sure it is up-to-date.

  Tap Settings > general > software update

  Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch - Apple Support

• Pairing problems

  My watch disconnects frequently.

  When this happens the pairing does not work. Nothing happens.  I focus the camera on the watch and zilch

  Same thing with the hand, my watch does not appear on the iPhone 6 sec more

  Finally, always at home, I connect it by dragging the screen.

  It's driving me crazy. He is a recent problem. It worked fine for months.

  iOS 9.3.5 on Windows 7

  Hello

  It is not normally necessary to re - associate your watch when it is disconnected from your iPhone.

  If your watch become disconnected from your iPhone via Bluetooth, it will attempt to connect to a Wi - Fi network known as a relief.

  To check the status of the connection of your watch at any time, go to the eye of parameters:

  • When displaying the time on your watch, slide up on the screen, then swipe left / right for the look of parameters.
  • This will specify connected or disconnected:
    • If it says connected and the icon in the upper right corner is a green phone, your watch is connected to your iPhone via Bluetooth.
    • If it says connected, the icon is a green cloud, then your watch is disconnected from your iPhone via Bluetooth, but rather connected (as a backup) to a known Wi - Fi network.
    • If it is disconnected, your watch is disconnected from your iPhone and also is not connected to a Wi - Fi network. The icon in the upper right corner will be a red telephone with a line through it.
      • In these circumstances, the same disconnected icon appears at the top of your watch face:

  

  • Slide down again to return to the watch face.

  Bluetooth range is about 10 meters/33 feet. The actual range will vary in practice, but you may not need to have your iPhone on or just around maintain you for the watch the Bluetooth connection.

  Disconnections can be normal, happening whenever the watch loses the Bluetooth connection with the matched iPhone and no known Wi - Fi network is available.

  Note that there is a difference between your devices being "matched" vs them becomes temporarily "disconnected". Once they have been paired, the watch and the iPhone will remain paired until they are non-matched manually. However, they can become disconnected or connected (several times), while remaining always matched.