IX2 - dl does not support USB hard disk
Hello!
I use an ix2 - dl as a backup at home. I recently upgraded from 2 TB WD red 2 (WD20EFRX) for 2 hard drives 4 TB (ST4000VN000) of Hitachi (two configurations were / are RAID1), and the upgrade went through flawlessly. But there is a problem: in the old configuration, I used a third drive connected via USB as a backup in case of failure of the NAS itself offline. Since I doubled the storage in the RAID array, I wanted to double the external storage as well. I plugged the third 4 TB on my homeserver disk, formatted (NTFS) and plugged my NAS ix4 - 300 d and just of stood and was used as the 2 TB drive in my ix2 - dl. However, when I plugged in my ix2 - dl it just does not appear here. I activated the end looked in SSH and foundout, he got during a few seconds under/mnt/ext /. said lsusb shows the drive is still there and parted and parted lists the disc correctly. I re-formatted it ext3 and ext4 and in both cases the reader is not always mounted on the correct mounting points. I created/mnt/test and mounted the USB it there using mount-t ext3/dev/sdc1/mnt/test, which works; Now I can access the drive via ssh. However when I tried mount - bind/mnt/test / / mnt/pools/A/A0 /
Why this drive works perfectly on my ix4 - 300 d one isn't quite on my ix2 - dl? I'm at my wits end with this issue. any help would be appreciated. Hello Firestart3r, From my experience, most of the devices and firmwares don't mount not an external drive that is greater than 2 TB: I understand that one device is to mount the drive while the other is not, but as a planned restriction, the only solution I can really offer is to partition the external hard drive to match the limitation. This will often allow to be mounted. Tags: Lenovo Products Airport utility in windows 10 detect but wireless internet does not detect the hard disk, how to do? Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive. What hard drive? It of a time capsule, or is it a drive connected to an airport extreme? What model number is the most convenient airport? Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format. In addition, not all drives are recognized. The internal drive of the TC must be recognized, but there could be problems as well according to the age. NI-VISA 5.3 driver Wizard does not support USB 3.0 devices Hi all It seems that NI-VISA 5.3 does not support USB 3.0 devices. When I try to use the driver Wizard to create a driver for a USB 3.0 device, I get the error "ERROR-1073807178: device descriptor error - value not valid bMaxPacketSize0 (must be set to 8, 16, 32, or 64 bytes). I noticed that the unit has been giving wMaxPacketSize0 of 512 (2 ^ 9). But the driver Wizard treats the value 9. So I think that Assistant driver does not support USB 3.0 devices. If someone could confirm this? Thank you very much in advance! Jackie Hello Jackie,. Unfortunately, USB 3.0 is not officially supported in VISA 5.3 when you use VISA Driver Wizard. A non-official solution is to work around the "information in the descriptor' by selecting 'Other' in the list of devices. You will need to manually enter the 'USB manufacturer ID (vendor ID)' and 'type USB (Product ID) Code. You will then need to find your driver in Windows Device Manager, right click and select "update driver software". This, however, is not a workaround solution guaranteed as NI-VISA 5.3 is not officially compatible USB 3.0. Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing I have a few problems on my laptop [Acer 3810 t] -The first problem -The second problem -The third problem What is the error code that you got with blue screen? I think that there is a problem with your drive HARD check that by contacting acer... does not detect external hard disk Hey guys Recently I update my macbook pro (2014) in the sierra of mac os. Since then, my mac does not detect any external hard drive I plug in it even if these drives are detected by the PC and all the files inside. I tried to open utility disk where the hard drive is displayed but the 'volume' located below is gray. When I try to hit mount said volume that nothing happens. All I could do to fix this? Thank you in advance. Hi sgerolio, I understand that you are unable to detect any external drive that you plug into your MacBook Pro, since you upgraded to macOS Sierra. How many external hard drives work? How they are formatted? If formatted for PC, they would not necessarily be able to be read by a Mac. You have a small empty external drive or USB key that you can test? Formatted in Mac OS extended (journaled). Using the Finder, you are able to see the external drive and drag a file to it? The title of the article includes the Aperture application but apply these tips to format an external hard drive to any software application. Drives external format Mac OS extended before using with opening Take care. My office does not find my hard disk computer can't find the hard drive to start upward Hello The disc hard does not respect or have failed. / Settings (BIOS/CMOS) often F2 then watch the display as you launch - set the initialization order on CD/DVD so he can Try these from a Vista startup disk command prompt - type each at the prompt and press ENTER after each. Bootrec /fixmbr Bootrec /fixboot Bootrec /scanos Bootrec /rebuildbcd How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and See this article here - to repair/rebuild using the Bootrec.exe tool Boot configuration data Sometimes using EasyBCD works when other methods are not. Recover the Vista or Windows 7 bootloader from the DVD Recovering the Vista Bootloader with EasyBCD Repair the Windows Vista boot loader If that works then run StartUp Repair twice the Vista boot disk, run once then I hope this helps. Satellite A210-19Z - BIOS does not find my HARD disk My HARD drive crashed so I bought a new and now my BIOS can not find it, and when I try to install XP, it says that it cannot find any hard disk. Please help me... I'm going crazy... Thank you! Hello The BIOS should recognize the new HARD disc without any installed SATA drivers! Please check the position of the jumper on the HARD drive. Usually, these riders are avaialbel for 3.5 HARD disk but some 2.5 drives hard also supports a rider where the master/slave/c-salt settings could be changed Welcome them Satellite M40 does not start from hard disk - read error "I push the button - briefly see the In Touch with tomorrow TOSHIBA screen - then ' + a disk read error occurred press Ctrl Alt Del to restart +". I control alt delete brings me briefly on the screen TOSHIBA where I can choose either F2 or F12. Do I need a startup disk and where can I get one in order to boot from the CD ROM? I'm stuck please help! Hello! If you enter the product recovery disc, Windows will be relocated and will be erasing all data on the HARD drive. I think that your HARD drive is damaged. You can check this with the Drive Fitness Test. Here you can download: By the way: you can save the data on the HARD drive, when you put it in a box external HARD disk. Then you can save the data on another PC, if the HARD drive is ok and have no errors. Good bye Friends with HP laptop does not start. corrupted hard disk Have a friend with a laptop HP combaq (nx7400 (?)) which froze on him. Has decided to suspend button / stop to force offshore. Boots it upward. «System 32 is missing or damaged something something...» » He decided to stay in a sanatizer drive thinking it could clean up. He then gets. "Non system disk or disk error, replace and strike any key when ready." I think the laptop will need a new hard drive or reinstall an operating system. A freshener disc running on it would leave it needing reinstalled the operating system. The previous gel upward and the error after restart is usually indication has no hard drive. Why LabVIEW 2012 does not support USB-6009? Hi all I recently installed LabVIEW 2012 and DAQmx 9.6 (and also tried with latest version) in my PC with Windows 7. I have the version of Explorer 5.4 measure and automation. I'm working with hardware DAQ USB 6009. Everything seems compatible, but when I try to post data acquisition, it fails. However, I used to use this device (since I bought it last year) with the other PC that has the Windows XP operating system and the older version of LabVIEW 8.5. What can I do with LabVIEW 2012 is a message "a 88302 error has occurred." and "This could be an internal error." If someone has an idea to solve the problem, please let me know. devkotaj Hi devkotaj, The USB-6009 device should work perfectly on Windows 7 with the software you have listed. This looks like a problem of configuraiton of material for me. What are you trying to do when you receive the error 88302? This error usually indicates a corrupt DAQmx driver, which may result from the installation of several DAQmx versions on the same machine. Have you tried repairing your installation DAQmx? I could uninstall DAQmx from the Control Panel before installing the latest driver. You can see our procedure to reinstall or uninstall recommenedd here. I hope this helps! Andy C. Engineering applications National Instruments Re: Satellite L550-129 does not support the Toshiba external HARD disk Toshiba Satellite L550-129 does not support disk Toshiba store.e canvio external hard. Al other portable thosiba in the family meets the canvio store.e and many former protable? Why do you think so? Hard drive replacement, windows support, media does not support this computer? Laptop HP G72 M #-C55DX, I replaced my hard drive with the same OEM, 4 recovery disks made when I bought the laptop new, replaced the hard drive, run startup test, memory and hard drive OK, insert #1 recovery disk, windows loads, then get the system recovery media does not support this computer. you are not able to restore the system with the media. I have windows 7 Premium I don't know what to do next. Thanks for the help. Frank My recovery disks that I had at the beginning are bad. Has bought the HP boot disks. up & running, thanks Frank New hard drive does not appear in the disk utility I am installing a new hard drive in my late 2011 13 "MacBook Pro. I started using apple's online retrieval system and went to disk utility. I tried to format the drive, but he is stuck saying "remove disc" for about a half hour, and then I had a rotation beach ball and could not move the cursor. I restarted the computer and now the drive does not appear in the disk utility. Any help is appreciated as I have no idea where to go from here. Thank you. You will may be turned off and check that your hard drive is correctly positioned with all the screws tight. I have a VB6 program with code that correctly reads the analog inputs of a NOR-USB-6008. I tried to re - use the code in a module of extensometer OR-USB-9237, but at the stage of DAQmxCreateAIVoltageChan, I get the following error: "Measurements: physical channel selected does not support the type of measure required by the virtual channel you create." Create a channel to a type of measure that is supported by the physical channel, or select a physical channel that supports the type of measure. » Should I call one function other than DAQmxCreateAIVoltageChan? If so, what is it, or where can I find the reference for these functions? Or - if it of the right function, should I pass different arguments? Currently, I'll call you: DAQmxErrChk DAQmxCreateAIVoltageChan(taskHandle, "Dev1/ai1", "", DAQmx_Val_Cfg_Default,-10, 10, DAQmx_Val_VoltageUnits1_Volts, "") Thanks in advance for your help -Alas I thought she 372251a. PDF Firstly, the correct function is DAQmxCreateAIVoltageChanWithExcit Second, you can't just ask for a sample single channel - ask for 2 samples instead. -Alas Does not support the Lenovo S650 Usb otg cable I bought the new lenovo S650 and I connect the usb otg cable for read my USB but it does not support? Why? Please help me S650 hardware does not support the OTG. Regardless of the cable. The micro-USB port to charge the phone only. Currently, all attachments are placed in the body of the email. Is it possible to change it? I would like to have all attachments in one place (as in Outlook). I checked several applications, but the MAIL is the best in addition to the problem of the Anyone Else still stuck in 2.1? 23 Pavilion: Pavilion 23 wireless I have a pavillion 23 all into one with a realtek GBE family controller after a reboot, that the wireless is missing, no network represented in taskbar. When I do a repair network it comes back and says that a network cable is missing What to do, I t Satellite T500 - how to use HD TV? Hello I just bought the Satellite T500.I was told I could just plug the antenna and it would work, but when I click on HDMI output icon I get the msg "it is only effective when the pc is connected to a TV set that supports HDMI control via the HDMI c Lens Sigma works well with my T5 I just bought a canon T5 and my sigma 28-200 lens than communicates quite well with the camera. I've used this lens with my rebel X. This is a common problem and there at - it a solushion or I don't hafe to buy a new lens?
https://Lenovo-na-en.custhelp.com/app/answers/detail/A_ID/34774/kW/externalSimilar Questions
My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)
because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)
So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before
boot on the CD/DVD and hard disk to boot to that. If you set it on a CD/DVD don't forget to return to hard-
driver when finished.
starting in Windows Vista problems
http://support.Microsoft.com/kb/927392
http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html
http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+from+the+DVD
http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+with+EasyBCD
http://NeoSmart.NET/wiki/display/EBCD/repairing+the+Windows+Vista+bootloader
Restart and then run again.
What should do? The new HARD drive is a Samsung SATA 2.5 "artno:HM121HI...
The SATA drivers are needed only for Windows OS!
Do I try to get into the Satellite M40 product Recovery DVD-ROM - this concern for me as the hard drive will be reformatted and all data will be lost.
http://www.HitachiGST.com/HDD/support/download.htm#DFT
Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
On the same site is a user's guide if you want to know more.
Drive external DRIVE is not recognized when you connect it to Satellite L550-129?Maybe you are looking for