Selected physical channel DAQmxCreateAIVoltageChan OR-USB-9237 VB6 does not support the type of action required

Similar Questions

• Physical channel selected does not support the type of output required by virtual channel

  I use a box USB-6251.  Inside of MAX, I can set the device to Dev1 / ao1 sine wave generation and if he have output a sine wave.  When I use DAQmx DAQmxCreateAOFuncGenChan function I get error: selected physical channel does not support the type of output required by virtual channel.  The pilot DAQmx does FuncGen on the box USB-6251 or MAX out a set of tensions?

  Hi Paul,.

  Welcome to the Forums EITHER!  The DAQmxCreateAOFuncGenChan is supported only on products Elvis II.  For other devices, including the 6251, you must use the ordinary DAQmxCreateAOVoltageChan and create your own data buffer.  I would recommend looking in the following example:

  Start > all programs > National Instruments > NOR-DAQ > textual Code > ANSI C examples...

  Analog on > generate voltage > Cont Gen Volt Wfm - Int Clk

  In MAX the Sinewave output is used as a test signal - in this case MAX is a period of the wave sine values to write to the buffer and generate these data.  Again, you can produce a sine wave (or any other function) using the AOVoltageChan, but the AOFunctionGenChan is used only with Elvis II.  Just generate data points for the sine wave that will produce DAQ hardware.

  -John

• Satellite Pro L300 - USB card reader does not support the 64 GB

  HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

  Posted by Trees
  

  HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

  Hi, here is a link to not detected by the PC card reader:
  http://KB.SanDisk.com/app/answers/de...CTED-by-the-PC
  You can take a look, hope it will be useful to you.

• Does not support the Lenovo S650 Usb otg cable

  I bought the new lenovo S650 and I connect the usb otg cable for read my USB but it does not support? Why? Please help me

  S650 hardware does not support the OTG. Regardless of the cable.

  The micro-USB port to charge the phone only.

• Cannot read iTunes from USB. Windows media player cannot play the file. The player might not support the file type or does not support the codec used to compress the file?

  Cannot read iTunes from USB. Windows media player cannot play the file. The player might not support the file type or does not support the codec used to compress the file?

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• Is there a download from Microsoft which will create a bootable usb media that does not have the drivers?

  Original title: A bootable Windows 7 media

  I work on a Lenovo 2-in-1 with Windows 7 (for games) and 10 (for a normal use) Windows to dual-boot. I created a USB stick with Windows 7 Pro (64 bit) of a legitimate Windows 7 Pro disc. The computer starts on the usb device and plays normally, however, one of the steps asks a driver for cd/dvd and this 2-in-1 (Lenovo Flex 3) doesn't have a built-in CD/DVD. All other drivers are located in a folder system. My question is, given my key Windows 7 can I create a new bootable media that does not demand drivers? Is there a download from Microsoft which will create a bootable usb media that does not have the drivers? I know that I can reinstall the drivers manually after the installation.

  Thank you

  Matt Armshaw

  Windows 7 or Windows 10 come preinstalled?

  If you install Windows 7 on a system that is preinstalled with Windows 10, you must do the following before:

  -Disable the secure boot UEFI

  -Disable the quick start

  -L' install created media can be corrupted.

  How to: Dual Boot Windows 7 or Windows 8 with Windows installed 10 first

  I suggest that you try to create another bootable copy.

• Error when you try to modify or to open a video (WLMP) using Windows Live Movie Maker: Movie maker does not support the selected file

  WLMP does not open on windows live movie maker?

  Well I made a video Windows live Director and saved it but when I try to open it to change some more it is said "Movie maker does not support the selected file" but he should not let me because I did in windows live Director please help!

  I'm having the same problem, but if I double click on the Window media player file appears help!

  ================================================
  Right-click the. WLMP file and try... Open with / Windows Live Movie Maker...

  See the following article

  Windows 7 - changing the programs that Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows 8 does not support the prolific usb to serial driver

  Windows 8 does not support the prolific usb to serial driver
  What is the solution?
  We want to use windows 8, but because of this driver issue, we do not buy windows 8

  Windows 8 does not support the prolific usb to serial driver
  What is the solution?
  We want to use windows 8, but because of this driver issue, we do not buy windows 8

  Understand when the manufacturer of the hardware device will provide you with the drivers for the hardware you want to use on the operating system you want to use.  If they aren't - so there you go.

• My USB 2.0 does not detect the USB keys or external hard drives

  I attach my USB mouse and it works fine but I can't detect my external hard drive or memory key USB. Why?

  Try plugging a storage drive (external hard drive or USB key) and go to:
  Control Panel-> administration-> computer management tools
  Under, click on storage disk management
  The storage drive appears in the list at the bottom right? If so, can you do a right click on it and select change drive letter and paths, and assign a drive letter.
  It will now appear in desktop and when you plug it in.

  If the drive does not appear in disk management, can you just tell me if it's a USB port specific, that you are having problems or if readers do not appear in one of your USB slots and also if you tried the discs in another system to make sure that they highlighted it?

• USB transfer cable does not recognize the photo LCD

  I'm trying to transfer photos to jpeg from my computer in a LCD photo frame.  I use a usb gigaware transfer cable.  When I select drive e: im to insert a CD in the e drive.  All usb ports are saying the same thing. Insert the disk into drive e:.  The photo frame supports my portable usb files in jpeg format, but I can't seem to get the program to be saved in the internal memory of the frame and can not copy and paste it because the opinion of disk insertion.

  Hi Coloradosioux,

  Question: "Please insert the disc in the drive" message when you access a USB flash drive.

  Here are some possible solutions for your question. I would like to know how it works:

  Method 1:

  1. Insert the removable disk in the removable drive before you start your computer.

  (Make sure that you have not the bios Setup to boot from the USB drive)

  Method2:

  1 log in as administrator or with an account that has administrator privileges

  2. Insert your removable disk into the USB port.

  3. Click Start, right click on computer and select Manage

  4. click on disk management

  5. right click on the removable disk partition and select change drive letter and paths to the title of the disk management.

  6. change the letter of the USB key to a different drive letter.

  Reference:

  http://www.troublefixers.com/how-to-fix-please-insert-a-disk-into-drive-error-in-Windows/

  Hope this helps,

  Steve <> Microsoft Partner

• My XP does not support the USB stick ffash

  After inserting my USB, message "Found new hardware" displayed, but then "there is problem in the installation of equipment, your hardware is not working properly"

  Hi window_novice,
   
  -This problem occurs with this particular device only?
  -Other USB devices work without any problem?
   
  Try connecting to different USB ports and see if the same problem persists.
   
  Follow the steps listed in the articles given below to resolve this issue:

  USB port may stop working after you remove or insert a USB device

  One or more USB devices may not work when you start your Windows XP-based computer

• NI-VISA 5.3 driver Wizard does not support USB 3.0 devices

  Hi all

  It seems that NI-VISA 5.3 does not support USB 3.0 devices. When I try to use the driver Wizard to create a driver for a USB 3.0 device, I get the error "ERROR-1073807178: device descriptor error - value not valid bMaxPacketSize0 (must be set to 8, 16, 32, or 64 bytes). I noticed that the unit has been giving wMaxPacketSize0 of 512 (2 ^ 9). But the driver Wizard treats the value 9. So I think that Assistant driver does not support USB 3.0 devices. If someone could confirm this?

  Thank you very much in advance!

  Jackie

  Hello Jackie,.

  Unfortunately, USB 3.0 is not officially supported in VISA 5.3 when you use VISA Driver Wizard.

  A non-official solution is to work around the "information in the descriptor' by selecting 'Other' in the list of devices. You will need to manually enter the 'USB manufacturer ID (vendor ID)' and 'type USB (Product ID) Code. You will then need to find your driver in Windows Device Manager, right click and select "update driver software". This, however, is not a workaround solution guaranteed as NI-VISA 5.3 is not officially compatible USB 3.0.

• Windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu

  Hello world

  I know, there are several other threads on this topic, but I couldn't find a working solution. I currently have no OS on my DELL XPS 17 L702X. When I try to install from a USB stick bootable Windows 7 Home Premium x 64 I get this error message: windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu.
  I've tried wiping HARD drive and reformat with GParted. I don't really know what I could do.

  I would be very grateful if you could help me

  Hello

  I suggest that you contact the manufacturer of the computer to change the BIOS settings and check if it is has updated the BIOS.

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know the results. We will be happy to help you further.

• Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer?

  Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer? I've looked everywhere but I can't find one. I hate the son, and I try to clear my desk of as many people as possible.

  # USB is cable only.

• Airport utility does not support my Airport - options to change the channel?

  I have an older Airport - extreme, I think, and the utility does not support.  I'm out of luck to change channel?  Time Warner said their modem did not support my newest Airport (? it's TWC) and now the internet keeps smoking at least once or twice a day.

  I suggest that you keep it simple.

  Your airport automatically analyze and choose the best channel to use when it lights up. So, if you have not done for some time, powering to the airport, wait a few seconds and then put it to the top.

  Even if you could change the channel... How would you know which channel to choose?

  Time Warner said that their modem did not support my most recent airport

  Time Warner will only support for a product they have received for you.  But this does not mean that a router from Apple will not work with their service. I've used Apple products for over 10 years with Time Warner.