J6N65AV: Replace drive with the boot SDS drive boot hard drive

Similar Questions

• Hard drive has been corrupted and replaced it with the new hard drive but couldn't get the windows genuine back 8

  Original title: recovery of original windows 8

  When I bought the new device, it was loaded with windows 8 but a few days before my hard drive has been corrupted and replaced it with the new hard drive but could not get the real Windows back 8.

  Please help me to get my windows genuine 8 back so I could get additional updates downloaded.

  Hello Vishal,

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  If you purchased a computer with installed OEM Windows 8 on it, there could be a sticker on the Tower, or in the back (in the case of a laptop) with the product key to this topic. If there is no sticker, he can be preinstalled on your system BIOS.

  See the suggestions posted by Andre Da Costa replied on March 7, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/how-to-get-Windows-8-product-key-in-preloaded/ea0e53ae-3506-4ba2-a092-f266ece7072f?auth=1

  In addition to this, see:

  Product key lost or misplaced (certificate of authenticity) for Windows

  If the problem persists, you can contact the manufacturer of the hardware for the same thing and check.

  Hope this information was useful.

• I can't uninstall the old silverlight and replace it with the new version.

  Im trying to uninstall the old version of silverlight and replace it with the new. It won't let me uninstall. Help, please

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest you for the link and check if that helps:

  Uninstall previous versions of Silverlight on Windows

  http://www.Microsoft.com/getSilverlight/get-started/install/uninstall-win.aspx

  Also check out the link to install Microsoft Silverlight:

  Download Microsoft Silverlight

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  Method 2:

  I suggest to consult the article and try to uninstall the program:

  Diagnose and solve the program installation and uninstallation problems automatically

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Let us know if it helps.

• accidentally, I buy the windows version of adobe acrobat DC instead of the mac version. I have only a mac computer. can you please cancel my purchase and replace it with the version of windows with a mac version.  the order number is AD006058877NL. Rgds,

  I accidentally buy the windows version of adobe acrobat DC instead of the mac version I only a mac computer can you please cancel my purchase and replace it with the version of windows with a mac version.  the order number is AD006058877NL. Rgds, jan van montfort + 31681471049. [email protected]

  Hi Jan,

  I understand your concern, please see this doc on this subject: return, cancel or change an Adobe order

  Kind regards

  Rahul

• Cannot convert win2k server - fails with the boot.ini on the version 3 and 4 error!

  Hello

  I am trying to convert an old win 2000 Server on an esx server, and I'm having a little trouble.  I am trying to run the converter and version 3 already tried with no luck.  On version 3, it manages at the end, think 97% I think and fails.  When I look in the logs of the converter, it seems to resemble a mistake with the boot.ini file.  I left the server for some time and today I have just spotted that the new version of the converter is out and although I'd give it a try.

  Unfortunately, I will have a chance to convert the server again.  It is not the last step.  Ive joined the output of the converter v4 logs.

  Here are the contents of the boot.ini file:

  boot loader

  Timeout = 0

  default = multi (0) disk (0) rdisk (0) partition (2) \WINNT

  "multi (0) disk (0) rdisk (0) partition (2) \WINNT="Microsoft Windows 2000 Server "/ fastdetect

  I would appreciate any advice or tips that I've been struggling with this and I have to get the server took off the old hardware that crack, on which it is running.

  Thanks, much appreciated

  "multi (0) disk (0) rdisk (0) partition (1) \WINNT="Microsoft Windows 2000 Server "/ fastdetect

  Error 1450 (hive loading error: insufficient system resources exist to complete the requested service (1450)) temporary loading hive
  .\vstor2-mntapi10-F1D31D11007E00000000000005000000\WINNT\system32\config\SOFTWARE under the name of the mntApi181664643429986496 key.

  Unable to load the registry hive
  .\vstor2-mntapi10-F1D31D11007E00000000000005000000\WINNT\system32\config\SOFTWARE, error 0x5aa.

  23202 error when you open the software hive

  Cannot read the news of the OS on the system disk: 23202

  You must increase the size limit of the registry on the source. For more details, see: Conversion failed with 1450 PlatformError under Windows 2000 or NT (1005979).

  Please award points if that's the right answer.

• How to change the HARD drive internal with the boot agent intel

  HP Pavilion DV 6135nr

  Windows XP media center edition

  Replaced the drive HARD internal and have error with boot agent intel.

  How to disable a intel boot agent.

  Helllo machadoas,

  You want to disable the Intel boot agent.

  You should be able to load in the BIOS at startup by pressing F10, go to boot order and move boot agent under the HARD drive.

  Here is a link that talks a little more about the boot agent.

  Let me know if it helps.

• EQL PS6010 online and I want to upgrade the capacity of the disk but original Dell drive are not available, it is possible to replace it with the original brand of Seagate.

  Hello

  One of my largest clients use a PS6010XV storage in production for 3 years. It is equipped with 8 disks SAS 600 GB drive HARD 15'000 rpm and shortly it will be out of space. He ask me full fill the table with hard 16 600 GB.

  My sales representative Dell told me that this kind of upgrade is not possible, the 600GB 15,000 rpm SAS drives is not available...

  My client is very upset by this situation and I'm trying to find another solution.

  Is it possible fill completes the picture with the original disc Seagate Cheetah 15K 3.5 "600 GB SAS 6 GB/s 24 x 7, type ST3600057SS instead of the original Dell disks?

  I can see the Dell drive (P/N 0944832 - 01) are Seagate brand and type is exactly the same.

  Kind eyes and waiting for your response

  Christophe

  Hello

  No, because it is custom firmware on the brand of Dell disks.  The EQL firmware will be search and reject non Dell/EQL brand discs.  Do not add any disk brand would also void the warranty.

  Kind regards

• Pavilion dv6t-2000: replacing old HARD disk with the new SDS and loading the OS with 1 & 2 recovery discs fails

  I just successfully replace the SSD, exchanging an old 250 GB HDD with a new 250 GB HARD drive.

  I started with success, inserted the disc of recovery by the instructions on the screen. Disc 1 and rendered, it succeeded.  When you are prompted, load disc 2, which was also successful.  When asked, in charge of the "application and driver recovery CD" and continued.

  At this point the computer restarted several times, as he said it would be completion of installation of all elements.  Then he came with a message that says: the recovery attempt failed. Select one of the following buttons.

  "Save Log"; 'Details '; 'Retry '.

  Details says:

  ChkErrBB.CMD: Detects an error in the PININST_BBV.

  ChkErrBB.CMD: check c:\system.sav\logs\BurnBootWarn.log

  Any suggestions here?

  I update my BIOS before proceeding with the Exchange.

  I found the solution to this problem was already answered here:

  http://h30434.www3.HP.com/T5/notebook-recovery/quot-detect-some-error-during-PININST-BBV-quot/TD-p/2593075

  Thank you!

• Can I move my current operating system that came with the computer on a new hard drive?

  My family got a hp pavilion m7560n some time ago.  Last weekend I heard on that clicking sound from the hard drive I think.  Since then, I only heard once or twice.  All that I know is that clicking may mean the hard drive is defect or on the way that him.   However I don't know if this is the case if the sound starts and stops.

  I want to know if I can format a new hard drive to replace the one provided with the system and always keep the same format as on the system when it was new.  I mean here the operating system and all other programs who came to this topic.  The recovery that are made to work for this computer discs may work on a new drive hard format if it is put in place of the system?

  Or are otherwise free to carry the operating system and other programs on a new hard drive.

  The hard disk provided with the system's 320 GB, I have one that is 500 GB.

  Hi logicman77,

  the recovery discs are meant to be exactly for this purpose.  You can put in a new drive hard (500 GB is fine), and the discs will reinstall XP, as well as all software provided on them.

  The computer will look like it did the day you took it out of the box.  This document will give you details on the implementation of the recovery: http://support.hp.com/us-en/document/bph07145

  Kind regards

• Desktop HP ENVY 700: problems with the boot from usb in the bios

  Hi I'm trying to boot from usb on a desktop HP ENVY 700. I don't know the serial number now.

  I followed the instructions and have produced a bootable USB and I checked this on a work dell computer where there is an option for me to boot from my USB if I so wish, but on my HP ENVY any options choose it does not appear with my USB in question and when I try to change the boot sequence making sure the usb/floppy and drive hard usb is above the rest of the sequencers starting it always starts just to the top as usual to my windows boot 10. I've disabled secure boot and used the boot of the legacy and it still does not work.

  I went through all the options I can that seem to be logic and it just does not work. I don't understand and I have to start using a usb key that I use the operating system can be very dangerous in a real environment, so it can not be downloaded to the hard drive.

  I need immediate help, this becomes quite frustrating now that it should be simple to do, but HP is not the way to simplisitic to do.

  Please if someone could point me in the right direction I would be so appreciative ideally if I could have a ride on the way to do

  I need this to work because I can't afford to buy new systems and its for my studies so its imperative

  Your PC has a motherboard of Memphis and happens to have a UEFI BIOS and the hard drive of the GPT format.

  You can check the type of hard disk online order volume by using the DiskPart utility.

  

  Create a flashdrive bootable UEFI with RUFUS.

  https://Rufus.AKEO.IE/

  Plug it into an available usb port before you press the power button. Near the powr button and immediately start to tap the F9 key to enter the boot from the sources menu. Select the Flash drive under the UEFI Boot sources. Let the boot process. If you have created the key correctly, it should start.

• new laptop does not start with the boot CD or DVD disk

  HP Pavilion laptop computer g6 brand new windows 7 Home premium 64-bit.  Updates Windows, updating the Bios and Telus security installed, otherwise the system is factory.

  I'd like to partition the hard drive partitions with Partition Wizard on a boot disk, maximum because I don't need a 650 GB partition to do the maintenance on more I like to keep my data and other separate files of my operating system.

  The DVD drive is set to boot first.  The DVD player works (made recovery discs, checked the content on the CD, etc.).

  What happens when I try to boot using the CD or DVD - the DVD drive sounds like it is being accessed, then stops and I get a blue screen. This happens as well with the diskette in the partition Wizard and recovery disks.  Whenever I start even if the bios is set to boot from the first DVD I press the esc key and reset the DVD to start everything first.

  I checked the disk the wizard partition on a desktop PC and it works fine.  I updated the bios after checking on the internet, as was the fix for this issue.  It don't did not help me.

  It took me a while, but I thought about it.  The laptop and DVD player with Windows 7 can't read a bootable disc, made by another computer.  It won't even read a USB stick formatted by another computer (Windows XP).

  What a pain.

• Unit works only with the Boot Camp Partition

  Hi guys - I searched the forums for a while and pretty well I came across all positions said that if the unit does not have to uninstall/reinstall VMware Tools.  I tried twice but nothing helped. I am very new to the merger, but for now I'm very excited/impressed with the trial version - I just everything works fine!

  Sorry to ask 2 questions in once, but someone pourrait' one also point me in the right direction on how to remove my bootcamp partition and strictly use VMware so that I can create snapshots and free up hard drive space?

  OSX 10.5.6

  Windows XP SP2 (bootcamp partition)

  VMware Fusion 2.0.4

  MacBook 1st Gen 13 "Core Duo 2 GHz, 2 GB memory

  Thanks in advance for helping me!

  drkenan wrote:

  How to remove my bootcamp partition and strictly use VMware so that I can create snapshots and free up hard drive space?

  If you want you can import the Boot Camp partition as a Virtual Machine based on a separate stand alone file, or you can install Windows from scratch.  After you import if desired you choose and you don't want to use Boot Camp natively or as a training Camp for the virtual partition Machine (not that any) and want to recover the space that the Boot Camp partition is far from taking the Macintosh HD you can then use the Boot Camp Assistant (/ applications/utilities/Assistant Boot Camp) to remove the Boot Camp partition to reclaim that space.

  For the import of the Boot Camp partition as a Virtual Machine based on a stand-alone file, take a look at: VMware Fusion (menu bar) > help > VMware Fusion help > creating virtual machines > import Virtual Machines > import the Partition Boot Camp

  Regarding the Boot Camp existing partition Virtual Machine...

  Note: These senses are different which have already been posted so read and follow through... Note: These steps assume that you have a single Apple to default installation of Windows on a single Boot Camp partition and Boot Camp of VMware Fusion single default partition Machine virtual (without a snapshot *) and if you have changed the partition Boot Camp Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Machine package virtual first. * Also note that Fusion 2.0.0 may accidentally have a snapshot with the virtual partition Boot Camp Machine and it should not have, then you should check to ensure that the condition does not exist as well. (With merger closed if the partition Boot Camp Virtual Machine package is over 1 MB in size, then you might have a snapshot in place and do not continue with these instructions.)

  ===

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will delete the partition Boot Camp Virtual Machine of the metadata and the Virtual Machine to help.

  Note: This does not affect the Boot Camp partition install windows in that it does not remove it.  Also be sure you copy all the command line below, as well as, "RM" at the beginning of the ' (quote) after the s in the Machines. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines.

  3. start Fusion (/ Applications/VMware Fusion) and select the Boot Camp partition on the window library of Virtual Machine, and then ctrl-click it and select Delete.

• Find/replace, searching for specific text to replace it with the paragraph tag

  I tried to replace a string of text that I have at the beginning of a paragraph indicating a certain style of paragraph with this style of ID while eliminating the text string. For example, I put @IN1 at the beginning of a paragraph I want formatted with the paragraph of my ID IN1 style. However, when I have 'Search' @IN1 with no. find format and 'to' do not change (i.e. empty) with the paragraph style selected 1 selected under format change, it applies the paragraph style, but does not delete the text string @IN1. When you do a search/replace without the portion of paragraph desired syle, he removes the @IN1 correctly. It is a bug, or is there something I have to put in the change of area indicate no text? Thank you

  Using the GREP tab, find ^ (@IN1) (.) and replace with $2 and set the paragraph style in the change of format.

  The ^ beginning of paragraph says and the $2 is the second subexpression matching.

• urlLoader - replace it with the File class to access external resources

  Hello.

  Just read up on the File class more than anything because I want to develop on mobile devices. Can I replace all my classes urlLoader with the File class for my games on the web.

  var prefsFile:File = File.applicationDirectory;

  prefsFile = prefsFile.resolvePath ("preferences.xml");

  I feel that it is perhaps a silly question, but I have to ask.

  See you soon

  Yes, but you probably don't want to use applicationDirectory because of security concerns.

  and is there a reason you can't use your urlloaders?

• How to remove empty entries in a table and replace them with the values of the instance?

  I have a table with values and spaces elements. I want to organize items such as table contains only values eliminating the empty spaces and re-organize the table with the values of cotimuous.  I use a bollean table to populate the items, so the bolleans to false fill the empty I don't want spaces. How can I program the above operation?

  Thank you

  Thank you for your solution, but I just found an easier way. INDEXING CONDITIONAL!. How I miss that. in any case, thanks...

• I have a visual disability & the new update with the tabs facing out is hard for me to see. Is there a way to return the old legs?

  new version 29.0.1 has dimmed the tabs that don't get much brighter, once clicked on. It's too hard to read when you have a visual impairment. is there a way to turn it off? Thank you.

  You can watch the classic extension theme restaurateur restore some features that has been lost with the arrival of the Australis style in Firefox 29.

  • Restorer of classic theme: https://addons.mozilla.org/firefox/addon/classicthemerestorer/
  • You can check the settings of the extension of the CTR via the Preferences button on the page "tools > Modules > Extensions.
  • You can find additional toolbar buttons and additional toolbar settings in customize (Firefox 3-bar menu button > customize)

  See also:

  • https://support.Mozilla.org/KB/how-to-make-new-Firefox-look-like-old-Firefox
  • https://support.Mozilla.org/KB/common-questions-after-updating-to-new-Firefox
  • https://support.Mozilla.org/KB/learn-more-about-the-design-of-new-Firefox