Driver Bluetooth not working not not on Windows 10

Similar Questions

• my new iMac (retina 5K, 27 inches, end of 2015) 4 GHz Intel Core i7, 32 GB 1867 MHz DDR3, TB 3.12 Fusion Drive bluetooth not working do not message comes bluetooth is not available

  my new iMac (retina 5K, 27 inches, end of 2015) 4 GHz Intel Core i7, 32 GB 1867 MHz DDR3, TB 3.12 Fusion Drive bluetooth not working do not message comes bluetooth is not available

  Reset the SMC.

  Barry

• device driver Bluetooth not found in windows 7hb update?

  I have not found a bluetooth device driver so please help...

  /

  Hello

  1. What is the number of brand and model of the computer?

  2. What is the message code error that you experience when you try to use the Bluetooth software?

  3. what was the recent change in hardware or software performed on the computer before the question?

  Please follow the steps mentioned below to help solve the problem.

  Note: Follow the troubleshooting steps in order of effective troubleshooting and compatibility checks.

  Method 1

  Error: "device driver Bluetooth not found" when you try to connect to a Bluetooth device

  http://support.Microsoft.com/kb/2654568

  Method 2

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-my/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Refer,

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/is-is/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  I hope this helps.

• Cannot install windows XP it said hard drives are not connected & windows can not find the hard drives

  I got an asus computer notebook windows vista, upgrade from vista to windows 7, now I'm not able to do a clean install of windows xp, when I try to install XP, it says that hard drives are not connected & windows cannot find not the hard drives, so once again installed windows 7, is there a way to overcome this problem Why do I get the message windows xp does not detect hard drives? I even formatted the hard drive & tried to install Xp, but still, I get the same message.

  The answers will be appreciated...

  Thank you

  Because the Windows XP installation CD does not have the necessary disk controller drivers.  You will need a floppy drive to provide the drivers of controller for the installation program, or you will need to burn a CD of Windows XP with the controller drivers slipstreamed into the installation.  A CD of Windows XP with SP2 included may have the necessary drivers.

  John

• No device driver Bluetooth not found

  I use blue Cambridge Silicon Radio, but the device bluetooth device no drivers found it please help me?

  I have a new Toshiba Tecra z40 and try to install my bluetooth devices on this machine running Windows 7.

  My bluetooth devices are Sony SRS X 3 and Plantronics PLT - M50 - it used to work on my older Dell, who is also running Windows 7, but not run in an error 'Device Bluetooth - no driver found' in the installation of the driver software screen.

  Sony and Plantronics did not require the installation of device drivers previously and their sites Web says no s/w needed to be install.

  Thanks in advance for your help.

  Michael

• Driver Bluetooth not available on the Dell Support suite

  Hello to everyone in the community,

  I have this Dell Inspiron 15R N5110 for the last year and I am generally satisfied with his performance. I got Windows 7 Ultimate edition provided by my dealer and it worked well all round. I joined Dell Community a few months ago and downloaded and installed DELL QUICKSET from Dell Support site as an update. Before installing Quickset suite Bluetooth to my laptop would work fine, but after installing quick adjustment, it has stopped working. Without doubt, I disturbed the sequence

  Recently, I installed a new copy of Windows 7 and follow the order appropriate for the installation of the driver. I couldn't find a driver Bluetooth of independent outside the BHS + WLAN driver on the dell support Web page. The laptop recognize the Bluetooth and Wireless LAN adapter but cannot start the two. I found the wireless LAN driver, but the driver now Bluetooth is not available on the official Dell support site. I tried online diagnostics and research on the Dell Support programs but could not find.

  Can someone please give me the link on Bluetooth driver in the Dell Support Web site?

  Concerning

  Junaid Shah

  Pakistan

  Hi Junaid Shah,

  Inspiron 15R N5110 goes hand in hand with a combo (Wi - Fi and Bluetooth) card and the drivers are not provided separately. You will need to download the driver of combo on the Dell site.

  The drivers are downloadable at the link below.

  http://Dell.to/QtFK85

• CD/DVD drive is not detected (Windows Vista). Error message: Please insert a disk (removable disk): __Our device driver is: TSSTcorp CD/DVGW TS-H653L ATA Device.

  Was not aware there is a problem until I tried some recently audio and data CDs.  Have you tried different Web sites to help you, however some of the directions come with a warning that by following certain procedures I can create other problems.  The FixIt tool was not able to install the player.

  Hello

  Please ALL these even if you've done it before as it's often the total process that
  solves the problem. You should also check with the system manufacturer as some readers do not use windows
  by default the drivers and need their own, use the bottom and if no joy check on the site of the manufacturer of the system.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Driver is not available {Windows 8}

  I have an ASUS Ultrabook who already had problems with Windows 8.  Windows 8 was uninstalled and a complete new installation has been made.  After the new installation of Windows 8 was made, he came with the missing drivers.

  All the drivers have been found except for one and I don't know which device needs a driver.  When I click and highlight the laptop I'm working on and has all the problem I get now are the error message that the driver is missing or there is no driver.

  How I found out which device needs a driver and the driver that is needed?

  I hope someone can help me with this...   I have not all devices attached to the laptop right now, so that I can get the laptop working correctly and win 8 being stable.  I need to install the printer to the laptop and that is not installed yet, while Win 8 can run successfully.

  At the moment can not find the device that needs a driver and not find a driver that is missing.  I hope someone can give me some suggestions about where to look for the answer to this problem...

  Marisa

  To find the missing driver

  Use the win + X key
  Device Manager
  find the "unknown device" (it will have a top yellow exclamation)
  Right-click
  Properties
  Details
  Use the pull down to view the hardware ID
  Copy them and google them

  

  

  

• HP 802. 11b / g wireless network adapter driver is not compatible windows 8

  I have a HP Pavilion P7-1054 and my RealtecNetwork adapter does not work after installation of window 8, 64-bit.  Have an error "network adapter is not available.

  Well, I think I got the LAN adaptors to work.  That I did use the HP System Recovery and load Windows 8, to my surprise, as I thought it was Windows 7 system in the computer.  Because it just to load the system and not the Applications when I checked this morning I had Internet and Email.  So I think that what has happened is the Internet of ESet security has done will not stop and this has prevented the loading of drivers.  So I thank you for your help, all right.  Now to learn a new operating system.

• Where can I get a driver bluetooth on HP Pavilion g6-2260us windows 8(64 bit) operating system

  Where I can get a bluetooth on HP Pavilion g6-2260us windows 8(64 bit) operating system driver. It doesn´t appears in the settings.

  Hello:

  Your model does not come with built-in bluetooth technology.

  Here is the link to the product for your model specifications page.

  If it came with bluetooth, which would have been listed next to the section of wireless connectivity, as well as the wireless card.

  http://support.HP.com/us-en/document/c03595184

• Driver Bluetooth not working not not in HP 15-g009ax

  Hello

  Recently, I bought the HP 15-g009ax. I installed the driver specified in the Ant because there are no drivers on the HP site. I have problem with bluetooth. After that I installed the bluetooth drivers it doesn't. I using windows 8.1

  Please help me on this.  It shows problem with the driver.

  

  Hi guys. If you facing the same issue I am facing, then follow them next steps are best practices to follow:-

  (1) install the following link: -.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127984-1&CC=in&DLC=en&LC=en&OS=4158&product=7101328&sw_lang=

  (2) If you still face the issue then try to install HP Support Assistant that will automatically download and install the drivers/updates:

  HPSA link:

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html

  (3) even after you have installed all the drivers and updates always confronted with the question then contact the HP hpsa link customer service: -.

  There is a tab named in the application, contact the technical support. Choose chat support online. inside to connect to techinical team of hp. they will have access to remote and slove the problem easily.

  Follow the steps above and you will be slove the problem. I hope that this will be for my colleagues. Thanks the help of techinical Hp (archana) who help me out of it.

• HP pavilion dv2700 Notebook PC: driver coprocessor not installed windows 8

  HI, yesterday I switch my windows system 8, and erase all programs and files, incluind, in fact my PC work perfect but when open the tool Manager, show me the coprocesador does not work because the inst driver installed, given the code 28, the unknowk saw manufactured and the Provenza is bus PCI o, device software 1, funcion 3. I can't upgrade the driver because I can't find int the web name of the manufacturer.

  This is the information from my laptop.

  System

  Windows 8 pro 64-bit

  HP pavilion dv2700 Notebook PC

  BIOS PhoenixBios 4.0 Realese 6.1

  processor AMD Turion TM 65 x 2 tl-60 2 cpu 2 GHz

  DirectX 11

  SCREEN

  NVIDIA GeForce 7150 - nForce 630 m

  Chip Geforce 7150 M Nforce 630M

  DAC. integrateed RAMDAC

  Monitor PnP Generico

  Driver main nvd3dum, nvdedumx.dll version 7.15.11.7948

  I need information for mi problem! and find the missing driver.

  PD: Sorry, I don't speak English very well.

  You are the very welcome.

  If only the execution of the file does not install the coprocessor to install it manually, follow the steps below.

  Go to Device Manager and click on the device of coprocessor needing drivers.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp37730.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart.

• OfficeJet Pro 8615: driver will not install windows 10

  Upgrade to Windows 10 windows 8.1.  Printer worked fine for a while.  The 8/30 began to have problems with printing.  Since then, have run print and scan doctor, installation software and follow all the steps detailed on the support site several times but nothing has fixed the problem.  Indeed, after you uninstall as recommended during this process, the pilot don't reinstall it not. I tried to run the full driver package, the base driver package and method of windows driver.  It is very frustarting.  I've exhausted all possible solutions on the support site.  I need to know what to look for and the steps needed to install this driver properly and restore the ability to print.  Please help before I think it necessary to change Epson or Lexmark.

  Thanks for getting back to me. Knowing that the printer will install properly on a another computer told us there is probably something on the current PC is blocking the installation of installation (the printer itself is fine). Alternatively, you can try to disable the firewall or security programs you have temporarily while you try to install the printer on the computer to see if this will allow to complete the installation.

  Just to add: make sure that the printer is on the same network as the PC you install it on. Find the printers IP address in the menu wireless printers and type the IP address in a web browser on your PC. You should be able to access the built-in web server printers if the printer and PC are on the same network.

  Here are some steps more to try it too:

  Step 1: Uninstall the device:

  Just because it is possible that a part of the software package and the pilot has made its way on your computer, I have to you find and remove the installation of the computer files.

  1. Click on the Start menu
  2. Click on all programs
  3. Select the HP folder
  4. Select HP Officejet
  5. Select Uninstall
  6. Click on the Start menu
  7. Select the devices and printers
  8. Click on any device once in the file devices and printers just to highlight. Then click on the print server properties at the top of the window

  

  9. click on the drivers tab

  10. click on your driver HP Officejet

  11 select Remove downstairs

  

  12. in the window Remove Driver and package click delete the driver only , and then select OK

  13 click on apply then OK in the print server properties window

  14. close devices and printers

  Please proceed to the next step.

  Step 2: Unlock hidden system administrator account:

  1. Click on the Start menu and in the box "search programs and files", type CMD
  2. CMD will fill as a search above, option just right click on it and "run as administrator"
  3. CMD (command prompt) opens, type net user administrator / Active: Yes and press enter
  
  on your keyboard
• Next, close CMD, then restart your computer
• When your computer is on the newspaper in the new account which should show. It will be called administrator , and you have a password on it.
• If your computer automatically connects to your account after reboot to go into your Start menu, click the arrow next to 'shutdown' and choose 'switch user'. Now log in the administrator account.
• Under the administrator account, please click here to download the package full feature software and driver of your printer.
• Once the download is complete, follow the instructions on the screen to install your printer
• Once installation is complete, please open the HP Solution Center software to confirm the scan software opens and works correctly
• If software HP Solution Center now works very well, please log out of the account administrator and return to your normal user account.
• Under your user account, the full-function software package and the printer driver must show completely installed. Please click on the HP Solution Center icon to confirm if it always opens correctly. If HP Solution Center opens very well please run a test scan to confirm functionality.

If the HP Solution Center software works very well, you need to hide the administrator account.

Step 3: Hide the system administrator account:

1. Go to your Start menu and in the box "search programs and files", type CMD
2. CMD will fill as a search above, option just right click on it and "run as administrator"
3. CMD (command prompt) opens, type net user administrator / active: No. and press enter
4. Next, close CMD, then restart your computer
5. When your computer turns on it please test the software HP Solution Center again to confirm that everything works again according to normal.

Let me know the results of these steps, good luck!

• Support driver does not"say"windows is looking for a solutiondriver problem

  Original title: windows 7

  For a month, whenever I boot, I get a warning that says "Driver Support does not work. Then he said: "windows is looking for a solution."  Then the two opinions to go and my homepage appears as usual. But as I use the computer, I find that it freezes while downloading. And it will take several periods of time before the download starts. Sometimes I have to restart.

  You have a problem with your hard drive.

  For a Dell computer, please visit this link:
  http://www.Dell.com/support/article/us/en/19/SLN115162/en

• Satellite L750: WLan LED is OFF / driver Bluetooth not installable

  Hi, can someone tell if it is known or unknown problem.

  It comes to the status of "Out-of-the-box".

  (1) wireless communication led her to the right is always disabled regardless of the status of the internet connection. As a general rule, connection is not detected on boot-up top, so FN + F8 and "All-on" step is necessary until I get internet connection Wi - Fi.

  (2) in this case, if I try to turn it on Bluetooth (for me to be able to use the Bluetooth mouse), it begins to install the Bluetooth driver but ends at halfway, telling it that "Bluetooth cannot be turned on, turn the knob on the side of the unit" - of course there is no physical button or switch on my laptop for this statement.

  To make things worse, if I try to update the BIOS with the latest version, the file contains a Trojan virus (as of December 3, 2012, 22:00, the New Zealand time), and I was unable to update.

  I've updated the network wireless third party (64-bit) driver, but it does not solve these problems.
  Thank you

  Please can someone help me?

  L750

  Model: PSK2YA-0T102S

  Post edited by: tshskzk

  Hello

  What system do you use? Win 7 or Win 8?
  Using Fn + F8 turn on the WiFi and BT and turns off.
  Using Win 7, you can enable and disable WLan or BT but using 8 win the FN + F8 would disable Wlan and BT at the same time.

  I have no idea what you have the WLan card, but I think that a single module contains a feature WiFi and BT. So if you want to install the BT stack you must install first the filter of Bluetooth (IE if you have the Atheros Wlan card, you need to install the Atheros BT stack BEFORE BT filter).

  Looks like the unit is of the Australia, then I recommend the driver page for all Toshiba drivers to THE