Jack-1

I need to know what steps to install w7 on computer window 8. Please note that this window 8 has been deleted. When I put the computer I hit f 10 with the cd on cd room that he did not recognize to start so I can install windo 7. What should I do?

When you request support, please provide the number of name and/or product of comprehensive model of the HP computer in question. HP/Compaq made thousands of computer models which are all different. Without this information, it can be difficult, even impossible to help you solve your problem.

HP does not recommend installing Windows 7 and it will support the installation of Windows 7 on a computer comes with Windows 8. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not support some of the hardware or software designed for the computer.

Please create your HP USB recovery or recovery disks support before changing or change anything on your computer.

Your computer most likely has a UEFI compatible BIOS and GPT partitioned the drive runs Windows 8.  You must DISABLE "Secure Boot" and ACTIVATE the sleep mode "Legacy" before that the computer boots from the CD/DVD.

I suggest using a Windows SP1 installation disk. You need to boot from the disk using the "UEFI - CD/DVD drive on startup" boot option and not the "Legacy - CD/DVD drive on startup. Using the boot option "Legacy" made Windows Installer can only be used on MBR disks partitioned.

Please send Bravo

Tags: HP Desktops

Similar Questions

  • iPhone 7 lightning to the questions of the audio input jack

    I often connect my phone to listen to music on stereo systems for listening to music out loud. When I used to do with my 6s, I had no problem with the sound output. Since switching to the iPhone 7 that I need to use the adapter to play music, but when I do this the sound is very distorted and sometimes if you put the volume a bit higher up the music stops. Even with a lower volume, it is still quite distorted. When I use a headset with the adapter and plug the phone into my car is fine no problem and sounds. It is only when I play music on the radio.

    I talked to Apple support and they were not really able to diagnose the problem or give me a solution.

    I was wondering if anyone else has problems with the lightning to the audio jack connector or something similar? and everyone is aware of any other superior quality adapters, you can buy or if there is a fix by apple to do deal with this?

    I don't have the problems you describe at all.

    To the extent where a 'solution' by Apple, not sure there is any 'broken' to fix.  Anyway, we are users here on this forum, we would have no idea what Apple would do.  Speculation is prohibited by the terms of use of this forum.

    Best,

    GDG

  • headphone 3.5 mm jack does not properly after update iOS10

    Headphone Jack is not working properly since I have updated to iOS 10, now on 10.0.2, before you start, I would say that my headphones work perfectly, I tried on other equipment, including my old ipod.

    So, here's what happened, whenever I plugged and you try to play a song on music or a video on youtube, I could not get any audio, restart the phone partially solve the problem, I managed to play ringtones in the settings menu without any problem, on both my headphones and loudspeaker at the same time , which I don't know if it is planned, I think it must have something to do with some bugs in iOS 10?

    someone at - it a similar experience or a solution?

    Hi oramicle,

    On the device that you have a problem? I also have this problem on the iphone 6 s. On two different helmets. It's certainly iOS 10.x, because I don't have this problem on the same device and helmet on iOS 9.x. I sent the bug report to Apple with this description:

    After some headphone output (jack 3, 5mm) at the moment does not work on iphone 6s 128GB, iOS 10.0.1 and 10.0.2 - no sound from the headset. Volume controls and MIC still works. When I make a call with the headset plugged and tapping on the microphone, I hear sound for headphone listening, but the others its not. No noise in other applications. Restart the temporary fix of the device this problem.

  • Is the new lightning-> adapter Jack works with iPhone 6?

    Is the new lightning-> adapter Jack works with iPhone 6? Or is it only compatible with iphone 7?

    Hello

    It is also compatible with the iPhone 6.

  • iPhone 7, lightning, USB and 3.5 jack

    Hi all

    Does anyone know if a connector for iphone 7 will be available with 2 outputs: USB and 3.5 Jack?

    concerning

    http://www.IMore.com/how-charge-your-iPhone-7-and-listen-headphones-same-time

    more

    headphones iPhone 7 and charging

  • IPhone 7, there will be an adapter jack allowing the two using headphones AND charger?

    IPhone 7, there will be an adapter jack allowing the two using headphones AND charger?

    Hello

    Apple has not yet announced a.

    You can submit your comments and suggestions to Apple here:

    https://www.Apple.com/feedback/iPhone.html

  • With no headphone jack, how to use the iPhone in my car 7

    Okay, so here's the challenge.  I have a power source and a headphone and not Bluetooth.  It works perfectly with iPhones before 7.  But with 7, it isn't possible to use the same configuration I had for years.  I own my car, and I have no interest in buying a new car just to support a new phone.  And since this will be a problem for the years to come if I stay with Apple, I would like to know what are the solutions are available.

    So, how to use the new iPhone 7 while remaining responsible and using my car speakers?  Dongles Bluetooth that I need to reload, it's probably not.

    Thus, looking for ideas that might have people.  I can't be the only one with this concern.

    It's almost a certainty that a third party adapter will appear quickly. The new Macbook has a single port usb - c and people asked the same question, 'how to load and use USB at the same time." There are today dozens of solutions for the Macbook, and then it will be with the iPhone 7. An adapter with a 3.5 mm jack and a port of loading Lightening would be my guess. Kickstarter entrepreneurs are probably already working on it.

  • issue of the iPad 2 Air headphone jack

    Is the audio jack for headphone out alone or is a connection of input/output dual function?

    It supports the microphone on any set of compatible headphones, if that's what you mean.

  • How do you get the end of a cord from the deep end of the telephone jack of Macbook air?

    End of the my cord to the broken inside the plug headphone of the MacBook Air and I can't get out. I first thought that it was part of the decision-making, so I pushed in as far as desired. Can an Apple Store correct it (goes to Chicago this weekend)? Or I send repair?

    Not sure if they can fix it up, but it is worth asking them to remove first plug for headphones.

    https://jeffmenter.WordPress.com/2012/01/15/how-i-fixed-a-headphone-jack/

  • the iPad headphone jack fault

    HI, I own an iPad iPad 4 mini and an iPad2

    There is a week iPad headphone plug 4 went in one channel and was sent for repair.

    last night, taken to mini helmet iPad went extremely crunchy before a few hours later the iPad died completely.

    Headphone Jack even night iPad 2 does not recognize a put jack in and goes to the headset mode.

    I like to use iPads for Djaying but cant help thinking that the helmet in all iPads is lower

    advise please because I can not continue to pay for repairs and lose the job because of this problem.

    Thanks in advance

    You can try to check the ports for any debris as well as the verification of the other end of your equipment. It is rare that the iPads fail together so by chance in order to check the other end of this cable.

  • Can I connect my ipad to a type of ordinary boom box and play music through the speakers?  The boom box has an audio jack.  So would simply use a 3.5 mm plug going both ways?

    I have an ipad4.  Can I connect it to a boom box type device to listen to music on the speakers of the box.   using an RCA type plug/plug?

    The iPad lacks a RCA type connector. You can connect from your headphones to an auxiliary, if it works with the headphone jack.

  • H8-1500z ENVY: Audio Jack before leaving abruptly - Win 10 months updated. Audio beats.

    Everything worked fine until a couple of days.

    Now, the audio streaming does not before taking. Taken back is fine.

    If I turn off the digital output, audio DOES come from the audio jack front (so no hardware problem). BUT the keyboard volume buttons do not work. In this mode, the volume must be adjusted by opening the window appropriately and with the mouse.

    I can't make it before the default device.

    I don't know what anyone that I did to preciptate. No new software, nothing. Just got back from vacation and that's the way it was.

    Thanks in advance.

    ~ LMG1

    Thanks for the reply. You are quite correct, that he will try again to install these updates. My initial intention was to see if it was an update to blame. Now it seems to be confirmed, what you can do depends on version 10 of Windows you have installed.

    Here is a Microsoft document that includes information on how to prevent a particular update in Windows 10: How to temporarily prevent a Windows Update or reinstallation of Windows 10 driver -support.microsoft.com.  This is very useful if you know what is the child of problem for your system.

    See also: How to prevent Windows 10 to automatically download updated -howtogeek.com, which shows the different methods you can use. It is likely that you will need to do, is the connection of the meter. The important thing to remember is that if you have several network or WiFi connections, each should be defined as inhalers 10 Windows will automatically use and run the updates with the connection open.

    I hope this helps.

  • HP Pavilion Notebook: microhpone does not work with jack 3.5 mm in the drop-down list

    Hello! My laptop has a 2 in 1 combo (headphones and microphone) and I recently bought a new external microphone with a 3.5 mm jack plug, but when I try to use it with my laptop it acts as an audio output instead, and device if poster not can under my audio device management settings.

    How can I use this external microphone without having to buy a splitter?

    Forget it, I just bought a microphone/headphone splitter cable. Here is hoping that it works, cus, I spent a little over an hour on the phone with technical support only for the me saying "this is not something that they lead us on. I'll transfer you to a service that can help you. OH, BTW WHO IS GOING TO BE A CALL FOR $99.99! »

    So, in short, I'll let you know if the Dispatcher works or not.

  • Compaq Mini 110: Polarity of power supply jack

    Hello

    I have a HP/Compaq Mini 110 that was given to me because both the battery and the AC adapter was lost. I have a power supply of the correct voltage (19 VDC) and can get an outlet of the right size. I need to know what the polarity of the plug must be, for example, is the center of the end positive or negative? I also need to know if the computer will be also powered if one battery (even dead) is not installed. If it will power-up with the polarity a/c adapter, I'm going to buy a battery, otherwise I don't lose money. Shame on HP/Compaq to not show a pictorial of polarity on the camera body. If I can get going, have enough moxie upgrade to Windows 10? Thank you.

    Here is the Service Manual:

    Manual

    See p. 54 on the hard drive. She straight plug the motherboard, but it shows a cart or make sledding which does not move there and the SSD is welded to a SATA connector. For some time I took one of these apart.

    He's a regular SATA and the size limit, it's what is on the market, not the hardware, so you could theoretically install a 2 TB or a 2.5 inch SATA SSD. You could probably get one inch 80 gig SATA SSD 2.5 for a pittance and it would run as well as he is capable of running.

    The memory you have is DDR2-800, but the system he clocks up to speed DDR2-533.

    The power Jack is soldered to the motherboard and there is no way I know to stretch upward. A lot of youtube videos on the welding on a new jack and you can find the plug for a few dollars. It is not a work that I do, but I saw several times and I think you can probably manage it if you have the soldering equipment.

    If this has answered your questions please make it easier for others to find by marking "accept as a Solution.

  • Satellite Pro U200 - DC jack is broken

    Hello everyone

    I was wondering if you guys can help me because I broke the dc jack on my laptop, its load only when the pin of the charger is in it at a certain angle and I can actually feel the plug into my laptop so moving is not the charger. I tried searching on the internet but without success because I don't know the part number, and even if I put the serial number on the website of his not really give me the part number and may cause toshiba do more :(
    Now I'm looking for power supply for Satellite Pro U200-199
    Part number: PLUA1E-01900JEN
    Main features
    -Technology Intel® Centrino® Duo Mobile with Intel® Core 2 Duo processor T7200
    -Windows XP® Professional
    -100 GB hard drive
    -1 024 (512 + 512) MB of RAM DDR2 (533 MHz)
    -12.1 "screen Toshiba TruBrite® WXGA TFT
    -Drive DVD Super Multi (Double Layer) slim

    Any help would be greatly appreciated. only thing, I had an experience at the hardware level, but not very good with soldering, should weld or not it comes with the wire that can be clicked into place.

    Thank you

    In the past, I found several threads where people have reported the same issue but on the different model of laptop. Obviously some of them have done a good job and repaired only.
    To find the DC jack is not a problem.

    You can find it on eBay and it is cheap. Put in google DC jack U200 and you will find it.

    Problem is that any computer laptop must be disassembled and new connector soldered to the right place.
    Can you do this?
    I want to say if you n t have experience with this stuff don t touch anything and ask for professional help.

  • my headphones (or headsets) does more work when plugged into the audio input jack

    I have a 2010 27-in. iMAC.   I am running Yosemite 10.10.5.   Recently I can't get audio on the audio jack that I always used with my helmet.  Have tried the other sons of contact as well as the apple earbuds.  Audio is great internal speakers.

    When you plug your earphones sound still come through the internal speakers?

    When you plug in your headphones, you see those as an option in preferences-> sound-> release system?

Maybe you are looking for