Jar of i/o Error when adding new class

Similar Questions

• Error when adding new subnet for CSM group

  Hello

  I'm trying to add a new subnet to an existing group in the CSM v4.0.1 b7823 company.  When you add a new subnet to the Group (the other elements of the group is a different subnet), CSM emits several errors for each SAA touched:

  Description:

  BB (GROUPNAME), referenced by the 'Http network' on maps (DEVICENAME) device to multiple network IP addresses!

  Cause:

  Made http refers to a network object that corresponds to more than one IP address on the device

  Action:

  Please config the policy with the network object that resolves to a single IP address.

  There is an error for ICMP as well.  The group is already a /24subnet content, I don't think it's a clear mistake.  Has anyone encounter this?

  Thank you very much.

  Justin

  Hi Justin,

  what you observe is normal given the way in which we have set up the remote access policy. As you probably know, in cli, you can specify only one rule of access by line for ssh, http, telnet etc...

  For example, if you want to allow ssh access to ASA lines host 1.1.1.1 and 2.2.2.2 you put two

  SSH 2.2.2.2 255.255.255.255 outside

  SSH 1.1.1.1 255.255.255.255 outside

  The CSM, we model this two lines as two different object, so the building of network type block object that refers to the object of type ssh access can have only one entry. This behavior is the same for ICMP as well.

  Access list is different because we model to the CSM in a different way, plus you can use the object-group put on different networks. It is not possible to access to the device.

  I hope that gave you an overview a little more on the reason

  Also it would be nice to score this answer if this is the case

  Stefano

• Strange error when adding constraints

  Hi friends

  We are oracle runing 11.2.0.3.0, windows server.

  Only we don't have any problems on the 'source' scheme, which has been exported and imported to a new schema using DataPump and remap_schema. The same error occurs when using exp.exe

  Gives this error when adding some constraints, but not all, the Oracle returns a failure statemente:

  ORA-31685:object REF_CONSTRAINT type: NEW_SCHEMA. NOTE_ITEM_FK failed due to insufficient privileges. In the absence of sql is:

  ALTER TABLE NEW_SCHEMA. NOTE_ITEM_FINAL ADD CONSTRAINT NOTE_ITEM_FK FOREIGN KEY (CODID) REFERENCES NOTE ENABLE (ID)

  But I'm the owner of the table user, I DBA and all other privileges. We often but suddenly got this erros.

  Any idea?

  I have REFERENCES of the concession and many other roles and privileges at the trial, but nothing has worked.

  If I run the command via SQLPlus it returns me

  ORA-00604: an error occurred at recursive SQL level 1

  ORA-01031: insufficient privileges

  But I'm not referring to any other table schema, just mine.

  TKS a lot

  Well

  I found a solution

  RENAME TABLE to aaa_bkp aaa

  CREATE TABLE AS SELECT aaa * of aaa_bkp

  Re-create all triggers and constraints.

  It is, I think it was a good work around

  TKS all

• I get the Windows 0xc0000135 error when opening new tabs in Google Chrome. Help!

  I get the Windows 0xc0000135 error when opening new tabs in Google Chrome. Help!

  It gets really annoying. The very first 2 or 3 times I opened a new tab, I get this error message and
  I have to close and open a new one until I get a tab that works. Anyone who can help is greatly appreciated.
  -Eric

  Hi EricKelso,

  The question you have posted is related to Google Chrome and would be better suited to the community of Google chrome. Please visit the link below to find a community that will support what ask you
  http://www.Google.com/support/forum/p/chrome

• Error when adding a new section with SQL in application websheet

  Get the following error while adding a new section with inside on an existing page SQL query in websheet request.

  ()This is the first time I tried to add a SQL query to an article in a websheet. Is that suppose to work?)
  
  

  

  You can see that access SQL and PL/SQL is already enabled for this application websheet.

  
  

  

  After trying many things, I found the 'access SQL and PL/SQL' must be enabled at the level of the APEX INSTANCE also.

  This is how to do it:

  (1) connect APEX as a forum admin with the following credentials:

  workspace: internal

  user ID: admin id defined during the installation of the apex (usually, it will be admin only)

  password: admin password set during the installation of the apex

  2) click manage the Instance > feature Configuration

  (3) select Yes to enable access SQL in Websheets

  

• Get an error when creating new attributes

  Hi all
  
  I'm creating new attributes to the gift list registration form, like 'Phone number', 'City' and so on...
  All attributes are already created in the production_core and database Editions, in the dcs_giftlist table, and the new giftlists.xml file is also created, see below:
  

  <gsa-template xml-combine="append">
       <item-descriptor name="gift-list" item-cache-size="1000" query-cache-size="1000" display-name-resource="itemDescriptorGiftList">
            <table name="dcs_giftlist" type="primary" id-column-name="id">
                 <property name="clientName" data-type="string" column-name="client_name" category-resource="categoryBasics" display-name-resource="Client Name (Nome do Cliente)">
                      <attribute name="propertySortPriority" value="-10"/>
                 </property>
                 <property name="emailAddress" data-type="string" column-name="email_address" category-resource="categoryBasics" display-name-resource="E-mail">
                      <attribute name="propertySortPriority" value="-10"/>
                 </property>
                 <property name="cityName" data-type="string" column-name="city_name" category-resource="categoryBasics" display-name-resource="City Name (Nome da Cidade)">
                      <attribute name="propertySortPriority" value="-10"/>
                 </property>
                 <property name="phoneNumber" data-type="string" column-name="phone_number" category-resource="categoryBasics" display-name-resource="Phone Number (Numero de Telefone)">
                      <attribute name="propertySortPriority" value="-10"/>
                 </property>
            </table>
       </item-descriptor>
  </gsa-template>

  Although, when I try to call the attribute created on the page, such as "GiftlistFormHandler.cityName", the following error message appears:
  

  ]] Root cause of ServletException.
  CONTAINER:atg.servlet.jsp.ContainerJspException: atg.droplet.DropletResources->dropletDescriptorCantFindProper
  ty : Can't find property: clientName in class atg.projects.store.gifts.StoreGiftlistFormHandler; SOURCE:atg.dr
  oplet.DropletException: atg.droplet.DropletResources->dropletDescriptorCantFindProperty : Can't find property:
   clientName in class atg.projects.store.gifts.StoreGiftlistFormHandler
          at atg.taglib.dspjsp.IncludeTag.doEndTag(IncludeTag.java:786)
          at jsp_servlet._myaccount.__giftlisthome._jsp__tag22(__giftlisthome.java:1102)
          at jsp_servlet._myaccount.__giftlisthome._jsp__tag21(__giftlisthome.java:1058)
          at jsp_servlet._myaccount.__giftlisthome.access$10(__giftlisthome.java:1032)
          at jsp_servlet._myaccount.__giftlisthome$JspFragmentHelper.invoke0(__giftlisthome.java:820)
          Truncated. see log file for complete stacktrace
  Caused By: atg.droplet.DropletException: atg.droplet.DropletResources->dropletDescriptorCantFindProperty : Can
  't find property: clientName in class atg.projects.store.gifts.StoreGiftlistFormHandler
          at atg.droplet.DropletDescriptor.<init>(DropletDescriptor.java:1368)
          at atg.droplet.DropletDescriptor.getDropletDescriptor(DropletDescriptor.java:1238)
          at atg.droplet.DropletDescriptor.getDropletDescriptor(DropletDescriptor.java:1195)
          at atg.droplet.DropletDescriptor.getPropertyValue(DropletDescriptor.java:443)
          at atg.droplet.DropletDescriptor.getPropertyStringValue(DropletDescriptor.java:245)
          Truncated. see log file for complete stacktrace

  I would like to know if there is any other xml file, that I need to change, or if I need to extend the class FormHandler, adding new attributes.
  
  Any help will be appreciated,
  
  Thanks :)

  Hi Lucas,.

  I don't see anyway decent to do this, the only way I think now is that you need to extend GiftListTools and GiftListManager and then 'find and replace' these methods that are called in your implementation. You must also override the addItemToGiftList() method in formHandler.

  In GiftListManager, you will need to override createGiftlistItem() and add the new property, you have recently added in GiftListManager and set it in the repository in createGiftlistItem().
  Ex:
  create mutableRepositoryItem and then
  mutableRepositoryItem.setPropertyValue ("propertyName", "propertyValue");
  for any properties that you want to set.
  If it works then you must override the method to get the point of filing of the database also.

  --
  Angelique

• OE_ORDER_PUB. Process_Order errors when adding a detail if one of the existing detail rows row is updated

  Hello!

  Whenever a sales order line is updated but not yet recorded in the order form, oe_order_pub. Process_Order errors when you try to add on the same command line. It gives the error "line locked out at the treatment of" the first time you run the api then it gives the error "Record is currently underway on by another user, please try to update later" on successful runs.

  When I tried to simulate the same using two forms of sale, an update of one of the lines and do not save more while the other added a line in the same order sale then save, he managed to save the line.

  What I don't understand the API's for it's to stop me if I just add a line, and it has nothing to do if an other lines are updated by another user (and this is only possible on the order form)?

  Is there anyone who has encountered the same? This is the normal behavior of the api or I missed something? No work around?

  Thank you.

  This problem is solved.

  The solution to the problem is that the value to calculate price flag must be set to 'Freeze the price' If you do not want Process_Order to update the price of unit sales of existing lines SB. Based on my observation and technically speaking, Process_Order updates price of all the existing lines of unit sales (and probably other columns) linked to the price based on the price of the object's current price list if the indicator price calculated is 'Calculate price' (I have not tried but in "Partial award"). If other users happen to edit one of these lines of l.o. and has not saved, the update fails and this is the reason for my problem.

  Thank you.

• Error when adding a partition to a view of materlialized

  Hello
  
  I get this error when you add a partition to a materialized view.
  
  ALTER MATERIALIZED VIEW mvedw statement. ADD PARTITION VALUES LESS THAN ('201304') MAR2013 MV_CLM_CAPITN_F
  *
  ERROR on line 1:
  
  ORA-14074: partition bound must gather greater than that of the last partition
  
  Please notify.
  
  Kind regards
  Narayan

  Well there you go - you already have this partition you want to add
  >
  MVEDW MV_CLM_CAPITN_F MAR2013 ' 201304'
  >
  Then why you try to do this?
  >
  ALTER MATERIALIZED VIEW mvedw statement. ADD PARTITION VALUES LESS THAN ('201304') MAR2013 MV_CLM_CAPITN_F
  >
  It is the SAME name of the partition and the value ('201304') in the list of partitions that you just posted.

  Maybe someone else added the partition when you weren't looking.

• First elements Timecode.cpp - 1014 error when adding media

  Software: First elements 11

  Camera: Sony DCR TRV22E

  OS: Windows 7

  When selecting Add multimedia elements, I get: [..-.. \Src\Timecode.cpp-1014] error several times, when the capture window finally arrives he says that the capture device is currently offline.

  This happens not only when the unit is plugged in and power but also when the camera is not connected.

  I tried different IEEE 1394 drivers available in windows 7 and none of them work.

  Host compatible OHCI 1394 controller

  Controller of compatible host OHCI 1394 (Legacy)

  VIA 1394 compatible OHCI Host Controller

  The connection to the camera via firewire is ok because I can download a video of him using Nero Essentials video, I can't do it through first elements 11.

  Post edited by: foradobeuse Oops, I put the incorrect error code in the title, it should be timecode.cpp - 1014

  I think I solved this problem.

  I have a number of external USB connected, for example, hard drives, webcams, mouse, keyboard etc., devices so I unplugged individual devices until I found that the Error 1014 is more appeared when adding media.  I plugged the other USB devices back in but kept the last disconnected device and can now add media from my miniDV via firewire.

  I don't think we can let off the hook here PE11, since I had no problems with USB so far and each capture freeware program that I tried did not have a video capture problem I had plugged in any USB device.

  Thanks to all who have contributed and I hope this helps other users faced with Error 1014, look at the number of points of view on this discussion after only a few days (~ 300) I don't think I was the only one.

• Error when creating new record in the jspx page.

  Hello! I have error when you try to post the new record in the jspx page (see: http://my.jetscreenshot.com/2677/20100820-oo8z-19kb)
  
  DB I trigger and in the EO primary key attribute I Type set to DBSequence.
  
  Where is the problem and what to do?
  
  Best regards, Debuger

  @Sireesha excellent point!

  @Debugger the reason why you get the error, it is you're missing an af:convertNumber, however, as said Jean Lou, why even put a DBSequence field on your screen?

  John

• I/o Error: CreateProcess:... on the build after adding new classes

  Hello

  Im getting an "i/o error: CreateProcess: ' during the construction. It happens after the addition of new classes. These classes are "reproduced". I mean, same name, different packages.

  If I delete the, Eclipse builds very well.

  I tried with the other package name, same error.

  Any solution?

  Thanks in advance.

  Hello

  IM using 1.0. The classes have the same name, but I think that's not the problem.

  I solved finally pass these classes in a lib project, so I think the problem is that there is a limit to the amount of classes for a project.

  Thank you

• error when adding a new collar with control constriant

  Hello
  
  I tried to add a new column with a check constraint, but giving error correct me please...
  

  drop table testchk
  
  create table testchk(typenm varchar2(5))
  
  insert into testchk values('mon')
  
  alter table testchk add typechk varchar2(5) default 'both' constraint chk_test check(typechk in('m','d') and typechk is not null)

  For the altar command getting the ORA-02293 impossible to validate the error...
  
  I don't want to create any other constriant as non-null, etc... but need to check only a single constriant
  
  Thank you

  The problem is with the default

  Try this

  drop table testchk

  create table testchk (typenm varchar2 (5))

  insert into testchk values ('my')

  ALTER table testchk add typechk varchar2 (5) default'm ' check constraint chk_test (typechk in('m','d') and typechk is not null)

• Get error when adding or deleting instance of a table row

  I'm absolutely brand new to LiveCycle ES2 (we were using Adobe Pro 7 until a week ago). I've been playing with some of our forms in an attempt to see what LiveCycle can do to update these in a format better.

  I have a table with a header line, a line of body and a footer line. The line of body must be reproducible. I used the custom object "subform Instance: insert delete move controls" to add the most and the sign less. I put the Action to repeat or delete the instance of this single line.

  The entire table is encapsulated in a subform that sank. The line that repeats is set to "repeat the line for each data item ' with Min County set to 1 and no Max count. The entire document is also wrapped in a subform, the value passed.

  When I go to preview and click the Add button of the Instance, I get this error:

  «WARNING: JavaScript Window - element insertion.»

  You have reached the maximum number of items allowed. »

  If I try to remove it an Instance button, I get a similar error on the minimum number of items allowed.

  BUT (and here the confusion belongs) the buttons work! The line is added or deleted, it gives me just the error first. What could happen? I tried affecting count Max 20 to see if giving it a number max can help, but I still get the error.

  I have it all done by using Design view, because I don't know anything about JavaScript, but I can post the generated code, if it helps.

  Hmm ok, the script of Action Builder is very overloaded, do not know what is causing the error.

  My suggestion:

  1. remove all the actions that you created with the constructor of the action

  2. for the button Add use this JavaScript in the click event

  Table._TableRow.addInstance (1);

  3. to remove button this JavaScript (will remove always the last instance of the line)

  If (Table._TableRow.count > 1) {}

  Table._TableRow.removeInstance (Table._TableRow.count - 1);

  }

• When adding new record create id data and the static information

  Hi, I have a tabe datbase like this:

  CREATE TABLE 'paper')
  'id_paper' INTEGER (11) NOT NULL AUTO_INCREMENT,
  'sample_url' varchar (50) COLLATE utf8_general_ci NOT NULL DEFAULT ",
  PRIMARY KEY ('id_paper')

  
  When I add the new record, I need the "sample_url" field to automatically add this information:

  images/15_sample.jpg.

  images - is subfolder where my pictures are stored
  15. is id_paper (primary news NuméroAuto ID)
  _sample.jpg - static and must be added.

  I use adobedeveloper Toolbox to generate code with minor changes, I'm no guru php either.

  I retrieve my data like this:

  SELECT
  Paper.ID_PAPER,
  Paper.sample_url,
  Concat ("< img src = images /', sample_url, ' ' ' width ="66"height ="174"/ >") AS sample
  Of
  paper

  I use this code to add fields:

  Add columns
  $ins_paper-> setTable ("paper");
  $ins_paper-> addColumn ("sample_url", "STRING_TYPE", "POST", "sample_url");
  $ins_paper-> setPrimaryKey ("id_paper", "NUMERIC_TYPE");

  It's php for the text box:

  < b >
  < class td = "KT_th" > < label for = "sample_url" > sample_url: < / label > < table >
  < td > < input type = "text" name = "sample_url" id = "sample_url" value = "<?" PHP echo KT_escapeAttribute ($row_rspaper ['sample_url']); ">" size = "32" / >
  <? PHP echo $tNGs-> displayFieldHint ("sample_url");? > <? PHP echo $tNGs-> displayFieldError ("paper", "sample_url");? > < table >
  < /tr >

  
  What should I change?

  I think in this line here:
  < td > < input type = "text" name = "sample_url" id = "sample_url" value = "<?" PHP echo KT_escapeAttribute ($row_rspaper ['sample_url']); ">" size = "32" / >
  I need to add php code to get the primary key ID and my static text too, but how?

  Hello

  Well the modified code is irrelevent at this stage. The custom trigger should do the trick. Test on my test server here it worked fine. So, something is missing. I was even going to the point of adding nothing to the sample_url field and he was always fill the db.

  It's my registerTriggers

  $ins_paper-> registerTrigger ('STARTER', "Trigger_Default_Starter", 1, "POST", "KT_Insert1");
  $ins_paper-> registerTrigger ("FRONT", "Trigger_Default_FormValidation", 10, $masterValidation);
  $ins_paper-> registerTrigger ("END", "Trigger_Default_Redirect", 99, "paper.php? done");
  $ins_paper-> registerTrigger ("AFTER", "Trigger_LinkTransactions", 98);
  $ins_paper-> registerTrigger ("ERROR", "Trigger_LinkTransactions", 98);
  $ins_paper-> registerTrigger ("AFTER", "Trigger_Custom", 50);

  Maybe you can post a txt file with the uninstall code?

  I really think at this point it's something small.

• How to sort previously existing records, when adding new bookmarks?

  I use FF 8 on a Windows PC.

  I know that I can add new bookmarks by clicking on the icon star or by right-clicking and selecting bookmark this Page. However, these two just send the new bookmark in the folder of unsorted bookmarks . At the end of each session, I then go manually through said folder, sort newly added Favorites in named folders.

  On the drop-down menu Edit this bookmark , there is the option to send the new bookmark to: choose, Unsorted Bookmarks, bookmarks Menu, Bookmarks Toolbar. I do not use the bookmarks toolbar by choice. If I choose the Menu bookmarks as destination folder, I still have the task of 'end of session' sort manually bookmarks newly added. And if I go for the option of Choosing , the same options available just recycle.

  Is it possible to create new folders of pre-sorting, which correspond to the and with my list of files of existing bookmarks? So I don't have to go through the sort of "end of session"? Or is folder: drop down menu, just a redundant back to a previous version of FF? (If it's the latter, it may be something for developers remove.)

  Please don't refer me back to the help files on the bookmarks. The only advice given sort, are recirculation references to add new bookmarks to the Unsorted Bookmarks folder and renaming, neither of which I have a problem with for the moment.

  "If you use the default theme there are two arrows next to the folder: name in the dialog Page Bookmarked." The arrow to the right opens a larger window (the same as when you select Choose) where you can select any folder in the folder Menu bookmarks by opening this folder (where all bookmark folders residing of your creation, outside the Bookmarks Toolbar folder). Simply select the folder you want to in this larger window. »

  I noticed that both of these arrows; If I select the larger of the two I just get a drop-down menu that lists the Bookmarks Toolbar, bookmarks Menu, unsorted bookmarkswith the new folderoption. If I then select new folder, then only I am presented with my existing bookmarks menu. From here I can then select a directory, but the new bookmark is placed inside the list in the folder/sub folder.

  If I choose the smaller arrow, I get Bookmarks Toolbar, bookmarks Menu, bookmarks not sorted, to Choose. Now if I select Choose, then I get a drop-down menu of bookmarks, Bookmarks Menu, Unsorted Bookmarks toolbar, with the new folderoption. And the above applies with respect to sorting.

  "Personally in profile with my largest set of bookmarks (have 3 different sets of bookmarks in separate profiles), I opened the sidebar using {Ctrl + B} with my left hand (small and indexes), drag the icon of the Web site with the mouse in my right hand, and then close the sidebar with another use {Ctrl + B}."

  You use the Ctrl + B to open or close, is by far the simplest method and I will use it in the future. And by dragging the icon of the Web site in the manner described above seems a valid method to add a new bookmark. However, there is no way to change the new name of the bookmark before being placed in the folder. But at least with this method, you can choose the exact position in the file/folder.

  "In addition, sometimes in another profile I drag site for the Bookmarks button icon in the Navigation bar, which opens the drop-down list of bookmarks and also the folder I want to place the new bookmark and save a new bookmark in this .manner....

  By dragging the icon of the site Web in the manner described above is also a valid method to add a new bookmark. However, there is no way to change the new name of the bookmark before being placed in the folder. But at least with this method, you can choose the exact position in the file/folder.

  "... "I do not use the bookmarks toolbar in any profile, I reduced the upper toolbar area down to only one or two toolbars to save space for the content of the page."

  Me too.

  As you say, it's not perfect, but there are ways to sort the entries. However if you want short and precise names for bookmarks, (and not the complete Web site address and or the list of what is at that site) then a certain amount of editing and or random play will take place at a later date. I'll look around for a Add-on to help me and thank you for your knowledge and help in this quest. I think for now at least, I will have to mix & match different ways to add new bookmarks and continue editing bookmarks newly added at the end of each session.

  Novel I just fell on the info that FF is a 32-bit application. Now I use it on a 64-bit PC. I checked beforehand to make sure that I got the correct version. But the newly acquired information indicates that the 64-bit versions of FF may be unstable. Maybe that's why I don't get the same range of menus as suggested.