Java has install does not.

Similar Questions

• Outer island, I have installed does not appear in 'my computer '. It has been configured for mac. How can I get that back to windows 7

  Outer island, I have installed does not appear in 'my computer '. It has been configured for mac. How can I get that back to windows 7

  What device?

  It appears in the Windows Device Manager?

• I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  Also, I went to the link propertie

  I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  I also went on the link properties itself, but without success in starting.  How to launch the new version?

  Thank you, toinimj59.  I did this part and the installation is complete (there is apparently not earlier--included an acceptance of the general terms and conditions...)

  Solution 1: Disconnect from the desktop creative cloud app and reconnect

  1. Disconnect from and to, the app Office creative Cloud click here for instructions to return in
  2. Launch of Lightroom.

• Checking update Java plug-in does not show latest version after update same

  Checking update Java plug-in does not show latest version after update same

  You exit and then restart your browser after Java update in order for the right version of Java to display the Plugin Check page. I felt it necessary to do so.

  See also:

  • Article on Java Mozilla - https://support.mozilla.org/en-US/kb/use-java-plugin-to-view-interactive-content
  • VΘrifier versions on site Java - http://www.java.com/en/download/installed.jsp

  Other - you should check your Plugins and update as needed.

  • Check your Plugins - https://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in, version 11.6.7.637 (aka Shockwave Player. Not the same as Flash/Shockwave Flash/Adobe Flash Player)
    • http://KB.mozillazine.org/Shockwave (mozillazine.org seems to be down at the moment (12/12/2012 11:34 am PDT), try again later)
    • Download, save, exit/close all browsers, run the installation program you just downloaded - http://get.adobe.com/shockwave/thankyou/
  • Adobe PDF plugin for Firefox and Netscape 10.1.4 (Adobe Reader 11 is the current version)
    • https://support.Mozilla.org/en-us/KB/use-Adobe-Reader-plugin-view-or-download-PDF-files

• Total memory of 4 GB newly installed does not appear in the Task Manager

  Total memory of 4 GB newly installed does not appear in the tab of the Task Manager performance. Only 3.3 GB appears. Is something wrong with the chopsticks of mem or mem from Vista 32 bit OS limit uses at this level. I have SP2.

  http://support.Microsoft.com/kb/929605

  "System memory shown in the system information dialog box in Windows Vista is less than expected if the 4 GB of RAM is installed.

  This behavior is the expected result of some hardware and software factors.

  Various devices in a typical computer require memory-mapped access. This is known as memory-mapped i/o (MMIO). For the MMIO space is available for 32-bit operating systems, the MMIO space must reside in the first 4 GB of address space.

  For example, if you have a video card that has 256 MB on-board memory, that memory must be mapped in the first 4 GB of address space. If 4 GB of system memory is already installed, the part of this address space must be reserved by the graphics memory mapping. Graphics memory mapping replaces part of the system memory. These conditions reduce the total amount of memory available to the OS System.

  The reduction in available system memory depends on the devices that are installed in the computer. However, to avoid potential driver compatibility issues, 32-bit versions of Windows Vista limit the total available memory to 3.12 GB. See the section 'More information' for more information on potential driver compatibility issues.

  If a computer has many features implemented, the available memory can be reduced to 3 GB or less. However, the maximum memory available in 32-bit versions of Windows Vista is typically 3.12 GB.

  See you soon.

  Mick Murphy - Microsoft partner

• How do I know if JAVA is installed or not in my VM.

  Hello everyone!

  I want to install oracle 11.2.0.1.0 on oracle Enterprise Linux 5.5

  While trying to create the database by using the tool (dbca), I get the following error.

  dbca $

  #

  # An unexpected error has been detected by the Machine virtual HotSpot:

  #

  # SIGSEGV (0xb) at pc = 0x9fcc43e4, pid = 9242, tid is 3086391504

  #

  # Java VM: Java hotspot Client VM (mixed mode 1.5.0_17 - b02)

  # Problematic frame:

  # C [libnnz11.so + 0x3c3e4]

  #

  A report of errors with more information file is saved as hs_err_pid9242.log

  #

  # If you want to submit a bug report, please visit:

  # http://Java.Sun.com/webapps/bugreport/crash.jsp

  #

  Abandoned

  
  

  ————

  I suspect that JAVA may be not compatible for my machine.

  How can I check if java is installed or not.

  Machine VMware Version is: 9

  
  

  $ uname - ir

  2.6.18 - 194.EL5 i386

  $ echo $ORACLE_HOME

  /U01/app/Oracle/product/11.2.0/Db_1

  $ echo $LD_LIBRARY_PATH

  /U01/app/Oracle/product/11.2.0/Db_1/lib:/lib:/usr/lib

  Hello

  It is a reported bug and you can apply the patch provided by the note and work around the problem. If this isn't the case, please try with Linux 64-bit OS and 64 bit DB.

  Thank you &

  Best regards

• I tried to run the IE8 downloaded from Microsoft and I got this message: "the version of IE you have installed does not match the update you are trying to install." error no. KB2618444

  I just got my SP3 for my XP machine, I tried to start the download of Microsoft ie8 and I got this message:

  "The version of IE you have installed does not match the update you are trying to install." error no. KB2618444

  I'd appreciate any help that I couldn't solve this problem!

  Thank you!

  E-mail address is removed from the privacy *.

  Original title: error KB2618444setup

  I do not understand your question. Download IE8? Do you mean the installer for IE8? It's here.

  You try to install KB2618444? They make 3. For IE6, IE7, and IE8. You probably download one from a different version of Internet Explorer you have...
  I'm going to guess you really want that for IE8.
  That's it: IE8-WindowsXP-KB2618444 - x 86 - ENU.exe

• get an error message Windows install does not. What can I do?

  Whenever I try to download a game or itunes, I get the Windows error message install does not. I don't know what someone can help me.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the Windows Installer service
  1. Click Start, type Services.msc and press {ENTER}
  2. double-click on Windows Installer
  3. set the Windows Installer to Manual startup type
  4. Click Start to start the service. Note the error message, if any.
  5. click on OK.
   
  Method 2: Unregister and re-register Windows Installer to follow the steps below.
   
  1. click on start, run, type MSIEXEC /Unregister. and then click OK. Even if you
  This correctly, it may seem that nothing is happening.
  2. click on start, run, type MSIEXEC/REGSERVER, and then click OK. Even if you
  This correctly, it may seem that nothing happens, or you can briefly see an hourglass.
  After you run this command, the operation is complete.
  3. try your application based on Windows Installer again.
   
  Method 3: Try the SFC scan on the computer:

  http://support.Microsoft.com/kb/929833

  It will be useful.

• If installation Adobe Acrobat DC Windows install does not update of managed advertised products. At least one characteristic of the product must be installed before applying the update.

  If installation Adobe Acrobat DC Windows install does not update of managed advertised products. At least one characteristic of the product must be installed before applying the update.

  Contact adobe support by clicking on this link then "still need help" as soon as it appears, http://helpx.adobe.com/x-productkb/global/service-ccm.html

• TE2300 XP install does not start?

  Hello world

  I'm trying to reinstall XP on a TE2300 (PT230A-00297) for a friend and met problems to make the installation of Win XP to start disc.

  I put a new HARD drive in there and the BIOS boot sequence is set correctly, but the system does not always start from the DVD drive, it seems to ignore that and moves directly to the LAN boot that is next on the list, to be on the HARD drive which is of course not formatted at this stage.

  I have an older HARD drive which is on the point of death, who already has XP on it and when it is installed in the machine everything works well and allowed me to confirm that the DVD player works correctly.

  Ideas, why the system does not boot to the CD/DVD?

  Any ideas how I can start an installation if I can't boot from the CD/DVD?

  Thank you kindly!
  Geoff

  It will be interesting to have more info on this new HARD drive.
  When you start your laptop try press the C key. This will force the optical disc drive to start as first boot device.

• Error 1719. JAVA update asked me to uninstall an earlier version of Java. Uninstall does not work and gave me the error 1719

  After you have installed JAVA 6 update 23, he said that a previous version has been detected and must be uninstalled using "uninstall microsoft.  The earlier version was JAVA 6 update 7.

  When I ran uninstall it in "Programs and features", the following message occurred.

  "Error 1719. The Windows Installer Service could not be

  consulted. This can happen if Windows install is not

  Successfully installed. Contact your support team for

  " Assistance."

  I used uninstall before and it worked.  How can I fix it.

  1719	= Windows Installer service could not be accessed. Contact your support team to check that it is properly registered and activated.

  2 tutorials for you:

  #1  The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team.
  http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/
  

  #2 How to fix "the Windows Installer service is not to be accessible"
  http://helpdeskgeek.com/how-to/how-to-fix-the-Windows-Installer-service-could-not-be-accessed-error/

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Inspiron 620-7750 Radeon with 450W power supply installed does not start

  Hello!

  I have looked EVERYWHERE online and on the forum and have seen several posts on this topic and still not found a solution that works.  I have a Dell Inspiron 620

  • I5Intel Processor2nd Gen Core i5-2310 / 2.9 GHz
  • Memory8 GB / 8 GB (max)
  • Windows 7 Home Premium 64 - bit Edition operating mode
  • Optical DriveDVD±RW
  • Graphics technology ProcesseurIntel HD Graphics 2000 dynamic video memory 5.0
  • Integrated graphics controller

  Recently, I buy a Powercolor Radeon 7750 graphics card I have installed the drivers, uninstalled the current Intel Graphics driver from Device Manager and then install the new card.  I of course unplugged the PSU got rid of and left in power has failed to myself and plugged into the PCI-E.  After I tired to turn on but it does not start.  Fans begin to turn, including on the graphics card, but nothing comes up on the monitor and it won't start.  When I unplugged the 7750 card it starts very well?

  At first I thought that it was not powered ridiculously horrible 300w PSU they put so that I have upgraded to an a 450w.  Everything works with the new power supply installed without the card, but as soon as I plug the new map, he continues to not start as before installing the card.  I have searched and tried things for 2 days now and CAN NOT find a solution.  I know that the 620 does not access the menu of the BIOS under settings in advance who does not help (don't know why Dell would never think it was a good idea!) so I can't change anything in there.

  Please, any help would be fantastic!

  Thanks in advance!

  The card is a bad card.  There should be ZERO problems with the supply of the stock 305 w and a 7750.

• java test applet does not not in ie8

  I'm new to Java and I do a few tutorials of Java programming book. I created an HTML document with the following cmdlet:
  
  < name of the cmdlet = "HelloWeb.
  Code = "HelloWeb.Class"
  width = 150
  height = 100 >
  < / applet >
  
  It is a simple document designed to test a basic applet that displays "Hello, World Wide Web! However, when I view the page in IE8, the applet displays an error message (which I can't read). Can someone help me with this?
  
  Published by: 880537 on August 19, 2011 19:42

  880537 wrote:
  I am running Java SE 7, which should be the latest version of Java available. Does this mean that I have to update my compiler?

  No, it means that your browser is not running Java 7, but has an older plugin.

  Sorry I keep asking these questions but I want to ensure my applet runs correctly in the future.

  It is compatible with 1.5 then maybe use the flag when compiling. Top of version 1.6. Unless you really need to use all the new features.

• Serious error in Acrobat 8, need to re - install, does not

  Hello!

  I have Acrobat 8 running on Windows XP.  He decided today not to work; No mods were taken to this program for a long time, no update or something weird!

  The error appears when I open Acrobat, but also if I open a folder that contains a PDF file.  The error is "a serious error has been detected and Adobe Acrobat 8.1.0 Professional cannot continue.  Please re - install the application and try again. "Acrobat stops if the user clicks OK.  In a folder without having Acrobat open, clicking OK does not affect the files.  I still can't view a PDF file.

  I have (on the advice of the guy LiveChat) uninstalled then re-installed.  This has not fixed it.

  Anyone know what to do about it?

  Thank you!

  First of all, to attempt a repair. As it crashes, you will have to do it from Control Panel > Add/Remove programs. If this does not work, then you can do the uninstall. If you do, remember to remove the Acrobat folder before reinstalling (but after the other steps). I make you run, you can consider doing updates for security reasons. The current version is AA8.2.4.

• UPK 3.6.1 silent install does not

  Try to install the UPK 3.6.1 in an enterprise by using Windows XP Service Pack 2 and Office 2003 environment.
  
  I ran the install and created a response file according to the installation notes, accepting all the default values of program.
  
  Now when I try to perform a silent installation using the setup.iss file, the Setup log returns "ResultCode =-3" and the application does not install.
  
  I was wondering if someone can suggest what to try next.
  
  Here's what my setup.iss file looks like:
  
  [InstallShield Silent]
  Version = v7.00
  File = response file
  [Transfer of files]
  OverwrittenReadOnly = NoToAll
  [{E230DC0A-5C4B-4963-8320-067FF3AF722E}-DlgOrder]
  Dlg0={E230DC0A-5C4B-4963-8320-067FF3AF722E}-SdWelcome-0
  Count = 7
  Dlg1={E230DC0A-5C4B-4963-8320-067FF3AF722E}-AskLanguage-0
  Dlg2={E230DC0A-5C4B-4963-8320-067FF3AF722E}-AskInstallOption-0
  Dlg3={E230DC0A-5C4B-4963-8320-067FF3AF722E}-SdSelectFolder-0
  Dlg4={E230DC0A-5C4B-4963-8320-067FF3AF722E}-SdAskDestPath2-0
  Dlg5={E230DC0A-5C4B-4963-8320-067FF3AF722E}-SdStartCopy2-0
  Dlg6={E230DC0A-5C4B-4963-8320-067FF3AF722E}-SdFinish-0
  [{E230DC0A-5C4B-4963-8320-067FF3AF722E}-SdWelcome-0]
  Result = 1
  [{E230DC0A-5C4B-4963-8320-067FF3AF722E}-AskLanguage-0]
  DLG_ASKLANGUAGE_LST_LANGUAGE = English
  Result = 1
  [{E230DC0A-5C4B-4963-8320-067FF3AF722E}-AskInstallOption-0]
  DLG_ASKINSTALLOPTION_LST_OPTIONS = customer
  Result = 1
  [{E230DC0A-5C4B-4963-8320-067FF3AF722E}-SdSelectFolder-0]
  szFolder = user productivity Kit customer
  Result = 1
  [{E230DC0A-5C4B-4963-8320-067FF3AF722E}-SdAskDestPath2-0]
  szDir = C:\Program Files\User productivity Kit\UPK developer 36Client
  Result = 1
  [{E230DC0A-5C4B-4963-8320-067FF3AF722E}-SdStartCopy2-0]
  Result = 1
  [Request]
  Name = User Productivity Kit
  Version = 3.6.1
  Company = Oracle
  Lang = 0009
  [{E230DC0A-5C4B-4963-8320-067FF3AF722E}-SdFinish-0]
  Result = 1
  bOpt1 = 0
  bOpt2 = 0

  Hi Jason,

  A few questions:

  1. have you tried to install on more than one machine, and is what happens always, or only in some cases?
  2. you are trying to run Setup in silent mode on other XP SP2 machines, or are these different operating systems? The answer file for identical operating systems use.

  The ResultCode =-3 said that "required data not found in the Setup.iss file." I have the feeling that the environment where you saved the response file has all necessary third-party applications installed, so that this dialogue has been ignored during installation 'recorded '. It would have been a dialogue after you have selected the option to install (it is not listed in the drop-down list in your answer file, that's why I'm thinking that the machine was updated).

  Thus, when you installed on the following machine with the response file, the setup.exe was now looking for this particular dialog in the response file, but it isn't here. For this response file to work, you must make sure the environment where you use all third party apps installed before running the installation in silent mode. If you look at the installer principal place (where the setup.exe) there is a "Third party files" subfolder, with all third party applications used by PUK. Those on these machines to install before running the installation in silent mode.

  If none of them are not already installed, install them:

  .NET framework 3.5 (in the DOTNET folder)
  MS Visual C++ 2008 runtime library (in MS_Visual_C ++ _2008_Redist folder)
  MSXML 4.0 (in the MSXML_4.0 folder)
  MS Primary Interop Assemblies 2005 (in the Primary_Interoperability_Assemblies_2005 folder)
  Web Service Enhancements 3.0 (in the Web_Services_Enhancements folder)

  Hope this helps,

  Matt