javax.security.auth.login.LoginException: unable to find LoginModule class

Similar Questions

• javax.security.auth.login.LoginException

  Hello
  
  I'm building a custom Client of IOM, I run the Web application in WL 10.3.3, while calling oracle.iam.platform.OIMClient.login (OIMUserName, OIMPassword), I get the error message. I put the following properties:
  System.setProperty ("XL. HomeDir", ' src/conf');
  System.setProperty ("java.security.policy", "src/conf/xl.policy");
  System.setProperty ("java.security.auth.login.config", "src/conf/authwl.conf");
  
  Even tried to set the following things in the "startWebLogic.cmd":
  -Djava.Security.Policy=%WL_HOME%\server\lib\xl. Policy
  -Djava.Security.auth.login.config=%WL_HOME%\server\lib\authwl.conf
  
  Always get the following error:
  
  javax.security.auth.login.LoginException: java.rmi.UnmarshalException: not to disrupt the class weblogic.security.acl.internal.AuthenticatedUser; nested exception is:
  java.lang.ClassNotFoundException: unable to load class com.netegrity.siteminder.weblogic.sspi.auth.SmWLSUser
  at weblogic.security.auth.login.UsernamePasswordLoginModule.login(UsernamePasswordLoginModule.java:189)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
  to javax.security.auth.login.LoginContext.access$ 000 (LoginContext.java:186)
  to javax.security.auth.login.LoginContext$ 4.run(LoginContext.java:683)
  at java.security.AccessController.doPrivileged (Native Method)
  at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
  at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
  at Thor.API.Security.LoginHandler.weblogicLoginHandler.login (weblogicLoginHandler.java:61)
  at oracle.iam.platform.OIMClient.login(OIMClient.java:134)
  at oracle.iam.platform.OIMClient.login(OIMClient.java:114)
  at com.seagate.oim.client.MobileOIMClient.loginToOIM(MobileOIMClient.java:62)
  at jsp_servlet.__requestlist._jspService(__requestlist.java:124)
  at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
  at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at org.sitemesh.webapp.contentfilter.ContentBufferingFilter.bufferAndPostProcess(ContentBufferingFilter.java:169)
  at org.sitemesh.webapp.contentfilter.ContentBufferingFilter.doFilter(ContentBufferingFilter.java:126)
  at org.sitemesh.config.ConfigurableSiteMeshFilter.doFilter(ConfigurableSiteMeshFilter.java:163)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.doIt (WebAppServletContext.java:3684)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3650)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  javax.ejb.EJBAccessException: [EJB:010160] security breach: user: '< anonymous >' a insufficient to access the EJB authorization: type = < ejb >, application is IOM #11.1.1.3.0 = iam - ejb.jar = UserManager ejb module, method is getDetailsx, methodInterface = Remote, signature is {java.util.Set, java.lang.String, java.lang.Object, java.lang.String}.
  at weblogic.ejb.container.internal.MethodDescriptor.checkMethodPermissionsBusiness(MethodDescriptor.java:581)
  at weblogic.ejb.container.internal.BaseRemoteObject.checkMethodPermissions(BaseRemoteObject.java:112)
  at weblogic.ejb.container.internal.BaseRemoteObject.preInvoke(BaseRemoteObject.java:275)
  at weblogic.ejb.container.internal.StatelessRemoteObject.__WL_preInvoke(StatelessRemoteObject.java:41)
  at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl.getDetailsx(UserManager_nimav7_UserManagerRemoteImpl.java:2469)
  at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl_WLSkel.invoke (unknown Source)
  at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:590)
  at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
  at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  
  
  Please post any possible solution. Thanks in advance.
  
  -
  Arjun Choudhury

  Unable to load class com.netegrity. * siteminder *.weblogic.sspi.auth.SmWLSUser

  You must put Siteminders jars in your CLASSPATH.

• javax.security.auth.login.FailedLoginException: [Security: 090302] authentication failed: user specified user refused

  Hi guys.

  I have been working on this now for a few days and still not got that right. I'm trying to implement JAAS custom authentication provider.

  To do this, I created a jar file and place it under WebLogic\wlserver\server\lib\mbeantypes\. Provider shows everything by creating the new Kingdom, so that's good.

  I created the new Kingdom (webRealm) and changed web.xml to get the inside webRealm:

  <>login-config

  FORM < auth-method > < / auth-method >

  < domain name > webRealm < / realm-name >

  < form-login-config >

  Login.jsp < form-login-page > < / form-login-page >

  LoginError.jsp < form-error-page > < / form-error-page >

  < / form-login-config >

  < / login-config >

  webRealm default security model: is DDOnly.

  Here is the configuration of domain:

  < domain >

  " < sec: authentication - provider xmlns:sam = ' http://www.BEA.com/ns/90/WebLogic/security/samples "xsi: type =" sam:db - user-authenticatorType "> ".

  < sec: name > serenadeAuth < / sec: name >

  < sec: control - flag > REQUIRED < / sec: control - flag >

  < / sec: authentication - provider >

  " < sec: role - Mapper = xmlns:xac ' http://xmlns.Oracle.com/WebLogic/security/XACML "xsi: type =" xac:xacml - role-mapperType "> ".

  < sec: name > XACMLRoleMapper < / sec: name >

  < sec: role - deployment-enabled > true < / sec: role - deployment-enabled >

  < / sec: role - Mapper >

  " < sec: authorizer = xmlns:xac ' http://xmlns.Oracle.com/WebLogic/security/XACML "xsi: type =" xac:xacml - authorizerType "> ".

  < sec: name > XACMLAuthorizer < / sec: name >

  < sec: policy - deployment-enabled > true < / sec: policy - deployment-enabled >

  < / sec: authorizer >

  < sec: adjudicator xsi: type = "wls:default - adjudicatorType" >

  < sec: name > DefaultAdjudicator < / sec: name >

  < / sec: adjudicator >

  < sec: credential - Mapper xsi: type = "wls:default - credential-mapperType" >

  < sec: name > DefaultCredentialMapper < / sec: name >

  < sec: credential - mapping-deployment-enabled > true < / sec: credential - mapping-deployment-enabled >

  < / sec: credential - Mapper >

  < sec: cert - path-provider xsi: type = "wls:web - logic-cert-path-providerType" >

  < sec: name > WebLogicCertPathProvider < / sec: name >

  < / sec: cert - path-supplier >

  < sec: cert - road-builder > WebLogicCertPathProvider < / sec: cert - road-builder >

  < dry: use-locking-manager >

  < sec: lockout - active > false < / sec: lockout - active >

  < / dry: use-locking-manager >

  < s: deploy-role-ignored > false < / sec: deploy-role-ignored >

  < s: deploy-strategy-ignored > false < / sec: deploy-strategy-ignored >

  < s: deploy-credential-mapping-ignored > false < / sec: deploy-credential-mapping-ignored >

  < s: entirely delegate-permission-> true < / dry: completely delegate-permission->

  < sec: security - dd-model > DDOnly < / sec: security - dd-model >

  < s: handset-role-mapping-activated > false < / sec: handset-role-mapping-enabled >

  < sec: name > serenadeRealm < / sec: name >

  < sec: delegate - m-bean-authorization > false < / sec: delegate - m-bean-authorization >

  < s: deployable-provider-synchronization-enabled > false < / sec: deployable-provider synchronization-compatible >

  < sec:auto-restart-on-non-dynamic-changes > true < /sec:auto-restart-on-non-dynamic-changes >

  < s: retirement-timeout-seconds > 60 < / sec: retirement-timeout-seconds >

  < / domain >

  Please note that by default realm is myrealm.

  When I try to login, I get following exception:

  < 30 November 2015 14:25:49 EST > < Debug > < SecurityAtn > < EKAMOLID-US > < myserver > < ExecuteThread [ASSETS]: '7' for the queue: "(self-adjusting) weblogic.kernel.Default" > < < WLS Kernel > > < 64905dec-c109-4df8-8f2a-7dd696508bc9-0000002f > <>< 1448911549362 > < [gravity-value: 128] [RID: 0] [partition id: 0] [name of the partition: DOMAIN] > < BEA-000000 > < javax.security.auth.login.FailedLoginException : [Security: 090302] authentication failure: specified by the user the user refused

  at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:343)

  to com.bea.common.security.internal.service.LoginModuleWrapper$ 1.run(LoginModuleWrapper.java:117)

  at java.security.AccessController.doPrivileged (Native Method)

  at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:114)

  at sun.reflect.GeneratedMethodAccessor1698.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:497)

  at javax.security.auth.login.LoginContext.invoke(LoginContext.java:755)

  to javax.security.auth.login.LoginContext.access$ 000 (LoginContext.java:195)

  to javax.security.auth.login.LoginContext$ 4.run(LoginContext.java:682)

  to javax.security.auth.login.LoginContext$ 4.run(LoginContext.java:680)

  at java.security.AccessController.doPrivileged (Native Method)

  at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)

  at javax.security.auth.login.LoginContext.login(LoginContext.java:587)

  at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)

  at sun.reflect.GeneratedMethodAccessor1696.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:497)

  to com.bea.common.security.internal.utils.Delegator$ ProxyInvocationHandler.invoke (Delegator.java:64)

  to com.sun.proxy. $Proxy48.login (unknown Source)

  to weblogic.security.service.internal.WLSJAASLoginServiceImpl$ ServiceImpl.login (WLSJAASLoginServiceImpl.java:92)

  at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:83)

  at sun.reflect.GeneratedMethodAccessor1700.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:497)

  to com.bea.common.security.internal.utils.Delegator$ ProxyInvocationHandler.invoke (Delegator.java:64)

  to com.sun.proxy. $Proxy67.authenticate (unknown Source)

  at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)

  at weblogic.security.service.PrincipalAuthenticatorImpl.authenticate(PrincipalAuthenticatorImpl.java:349)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:497)

  at weblogic.security.service.ServiceHandler.invoke(ServiceHandler.java:55)

  to com.sun.proxy. $Proxy77.authenticate (unknown Source)

  to weblogic.servlet.security.CSSServletSecurityServices$ CSSApplicationServices.authenticate (CSSServletSecurityServices.java:318)

  at weblogic.servlet.security.internal.AbstractAppSecurity.authenticateAndSaveCredential(AbstractAppSecurity.java:63)

  at weblogic.servlet.security.internal.SecurityModule.checkAuthenticate(SecurityModule.java:313)

  at weblogic.servlet.security.internal.SecurityModule.checkAuthenticate(SecurityModule.java:260)

  at weblogic.servlet.security.internal.FormSecurityModule.processJSecurityCheck(FormSecurityModule.java:261)

  at weblogic.servlet.security.internal.FormSecurityModule.checkUserPerm(FormSecurityModule.java:198)

  at weblogic.servlet.security.internal.FormSecurityModule.checkAccess(FormSecurityModule.java:96)

  at weblogic.servlet.security.internal.SecurityModule.isAuthorized(SecurityModule.java:712)

  at weblogic.servlet.security.internal.WebAppSecurity.checkAccess(WebAppSecurity.java:576)

  at weblogic.servlet.security.internal.WebAppSecurity.checkAccess(WebAppSecurity.java:536)

  at weblogic.servlet.internal.WebAppServletContext.doSecuredExecute(WebAppServletContext.java:2369)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2280)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2258)

  at weblogic.servlet.internal.ServletRequestImpl.runInternal(ServletRequestImpl.java:1626)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1586)

  to weblogic.servlet.provider.ContainerSupportProviderImpl$ WlsRequestExecutor.run (ContainerSupportProviderImpl.java:270)

  at weblogic.invocation.ComponentInvocationContextManager._runAs(ComponentInvocationContextManager.java:348)

  at weblogic.invocation.ComponentInvocationContextManager.runAs(ComponentInvocationContextManager.java:333)

  at weblogic.work.LivePartitionUtility.doRunWorkUnderContext(LivePartitionUtility.java:54)

  at weblogic.work.PartitionUtility.runWorkUnderContext(PartitionUtility.java:41)

  at weblogic.work.SelfTuningWorkManagerImpl.runWorkUnderContext(SelfTuningWorkManagerImpl.java:617)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:397)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:346)

  >

  The problem is why the system tries to use LDAPAtnLoginModuleImpl when webRealm it does not use for the supplier?

  My client provider is not called at all, I know that because I put System.out.print () messages in there to see if it goes off.

  No idea why weblogic does not use my custom (webRealm) area?

  Thank you.

  webRealm configuration in the web.xml file has no effect on the authentication process with WLS.

  You can create your authentication provider in the default domain itself.

  Make sure that your custom authentication works.

  Also change the default authenticator control indicator and your authenticator personalized sufficient / option so that even wls default users can connect to the console of wls.

  You can see my article for more details on the custom authenticator.

  http://WebLogic-wonders.com/WebLogic/2014/01/14/simple-sample-custom-database-authenticator-Oracle-WebLogic-Server-11g/

  Hope you found my answer helpful.

  Thank you

  Faisal

• Windows live mail has been disabled temporaraly unable to find a way to reactivate

  I use windows live mail for 2 months, no problem. 3 nights ago received a phone call from one of my contacts email sent me back to them. Went to my email and had a note temporarily deactiveated. Have been unable to find a way to reactivate. Help, please.  KD my e-mail no longer works, you can contact me @ xxx-xxx-xxxx E-mail * address email is removed from the privacy *.

  Hello

  You will need to contact Windows Live support for any issue you need to deal with your account.

  http://windowslivehelp.com/default.aspx

  I also edited your address phone number for security reasons.  It is not a good idea to post such information in a public forum.
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• IKE initiator unable to find the policy; Outside INTF, CBC: error

  I have a Cisco ASA 5505 having a tunnel at a remote office. I just put in place another identical to another tunnel and when I followed the VPN in ASDM I see that the VPN is active. But I can't ping through it. When I check the logs I see "IKE initiator unable to find the policy; Outside INTF, CBC:... "Nobody knows what might be the cause? Here is a copy of the configuration. Thank you.

  See the config of bdavpn1 #.
  : Saved
  : Written by admin in 17:54:11.823 HAA Monday, June 7, 2010
  !
  ASA Version 8.2 (2)
  !
  hostname bdavpn1
  domain.com domain name
  activate the encrypted password of OSaXLnYQKkAcBhYA
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  !
  interface Vlan1
  nameif inside
  security-level 100
  192.168.2.100 IP address 255.255.255.0 ensures 192.168.2.101
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 101.17.205.116 255.255.255.1018 Eve 101.17.205.117
  !
  interface Vlan3
  nameif dmz
  security-level 50
  IP 172.20.0.1 address 255.255.255.0 watch 172.20.0.3
  !
  interface Vlan4
  Failover LAN Interface Description
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  switchport access vlan 91
  !
  interface Ethernet0/3
  switchport access vlan 3
  !
  interface Ethernet0/4
  switchport access vlan 3
  !
  interface Ethernet0/5
  switchport access vlan 4
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  passive FTP mode
  clock timezone AST - 4
  clock to summer time recurring ADT
  DNS domain-lookup dmz
  DNS server-group DefaultDNS
  Server name 172.20.0.99
  domain.com domain name
  permit same-security-traffic inter-interface
  permit same-security-traffic intra-interface
  object-group Protocol TCPUDP
  object-protocol udp
  object-tcp protocol
  object-group network Chicago-nets
  object-network 10.150.1.0 255.255.255.0
  object-network 10.150.55.0 255.255.255.0
  object-network 10.150.56.0 255.255.255.0
  object-network 10.150.57.0 255.255.255.0
  object-network 172.16.1.0 255.255.255.0
  object-network 192.168.26.0 255.255.255.0
  object-network 10.150.111.0 255.255.255.0
  the DM_INLINE_NETWORK_2 object-group network
  object-network 192.168.4.0 255.255.255.0
  object Group Chicago-nets
  the DM_INLINE_NETWORK_1 object-group network
  object-network 192.168.4.0 255.255.255.0
  object Group Chicago-nets
  the DM_INLINE_NETWORK_3 object-group network
  object-NET 172.20.0.0 255.255.255.0
  object-network 192.168.2.0 255.255.255.0
  the DM_INLINE_NETWORK_4 object-group network
  object-NET 172.20.0.0 255.255.255.0
  object-network 192.168.2.0 255.255.255.0
  outside_cryptomap to access extended list ip 192.168.2.0 allow 255.255.255.0 DM_INLINE_NETWORK_1 object-group
  inside_nat0_outbound to access extended list ip 192.168.2.0 allow 255.255.255.0 DM_INLINE_NETWORK_2 object-group
  inside_nat0_outbound to access extended list ip 192.168.2.0 allow 255.255.255.0 172.20.0.0 255.255.255.0
  inside_nat0_outbound list extended access allowed object-group ip DM_INLINE_NETWORK_3 192.168.4.0 255.255.255.0
  inside_nat0_outbound list extended access allowed object-group ip DM_INLINE_NETWORK_4 192.168.4.0 255.255.255.0
  Note to access list outside_to_dmz allow access to the citrix Server
  outside_to_dmz list extended access permit tcp any newspaper HTTPS host 101.17.205.123 eq
  dmz_to_inside allowed extended access list host 172.20.0.2 ip 192.168.2.0 255.255.255.0 connect
  Note to outside_access_in entering of Citrix access list
  outside_access_in list extended access permit tcp any host 101.17.205.123 eq https
  outside_2_cryptomap list extended access allowed object-group ip DM_INLINE_NETWORK_4 192.168.4.0 255.255.255.0
  pager lines 101
  Enable logging
  timestamp of the record
  logging paused
  logging buffered information
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  MTU 1500 dmz
  IP verify reverse path to the outside interface
  failover
  primary failover lan unit
  failover failover lan interface Vlan4
  failover interface ip failover 172.16.30.1 255.255.255.252 watch 172.16.30.2
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 625.bin
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  Global interface (dmz) 2
  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  static (dmz, external) 101.17.205.123 172.20.0.2 netmask 255.255.255.255
  Access-group outside_access_in in interface outside
  Access-group dmz_to_inside in dmz interface
  Route outside 0.0.0.0 0.0.0.0 101.17.205.115 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  AAA authentication enable LOCAL console
  AAA authentication http LOCAL console
  LOCAL AAA authentication serial console
  the ssh LOCAL console AAA authentication
  AAA authentication LOCAL telnet console
  LOCAL AAA authorization command
  Enable http server
  http 0.0.0.0 0.0.0.0 outdoors
  http 0.0.0.0 0.0.0.0 inside
  redirect http outside 80
  SNMP-server host inside 10.150.1.177 community survey * version 2 c
  SNMP-server host inside 10.150.2.38 community survey * version 2 c
  location of Server SNMP Hamilton, Bermuda
  SNMP Server contact René Bouchard
  Community SNMP-server
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Service resetoutside
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  inside
  redirect http outside 80
  SNMP-server host inside 10.150.1.177 community survey * version 2 c
  SNMP-server host inside 10.150.2.38 community survey * version 2 c
  location of Server SNMP Hamilton, Bermuda
  SNMP Server contact René Bouchard
  Community SNMP-server
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Service resetoutside
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  card crypto outside_map3 1 match address outside_cryptomap
  outside_map3 card crypto 1jeu peer 101.88.182.189
  outside_map3 card crypto 1jeu transform-set ESP-3DES-SHA
  card crypto game 2 outside_map3 address outside_2_cryptomap
  outside_map3 crypto map peer set 2 101.1.95.253
  card crypto outside_map3 2 the value transform-set ESP-3DES-SHA
  Crypto map outside_map3 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map3 interface card crypto outside
  Crypto ca trustpoint bdavpn1
  Terminal registration
  domain name full bdavpn1.domain.bm
  name of the object CN = bdavpn1.domain.bm, OR = Ltd, O is domain, C = US, St is of_confusion, L is Hamilton,[email protected] / * /
  Configure CRL
  Crypto ca certificate card domainincCertificateMap 10
  name of the object attr cn eq sslvpn.domain.com
  Crypto ca certificate chain bdavpn1
  certificate ca 00
  30820267 308201d 0 a0030201 02020100 300 d 0609 2a 864886 f70d0101 04050030
  32310b 30 09060355 04061302 5553310 300 b 0603 d. 55040 has 13 41 53311430 04414c
  12060355 0403130b 63612e61 6c61732e 636f6d30 35303130 31303630 1e170d39
  3335 30313031 30363031 31395 has 30 32310 b 30 170d 3131395a 09060355 04061302
  300b 0603 55040 5553310d has 13 04414c 41 53311430 12060355 0403130b 63612e61
  06092a 86 4886f70d 01010105 0003818d 00308189 819f300d 636f6d30 6c61732e
  c19012ed 02818100 4cf67378 c9347162 2bcf6519 a3ab748f 1c9cae07 5c232c93
  8a 625638 68416412 and 55808768 412675bc 5906ba4a 3ffd1d101 303d0ea7 d559ccf8
  0d425ffc edf1cee8 337ca5c7 5f718f2d 081551f8 fc742b78 8866de9b c82310b0
  89975e30 7ea7f047 bf518ac3 aa2dfd7e f93b1016 7d5261ea 34f18fa7 748d52c8
  7595ecb3 02030100 01a3818c 30818930 1 d 060355 1d0e0416 0414c1ab b8651761
  fc3f12d1 b132322e be36ff6a cecb305a 0603551d 23045330 518014c 1 abb86517
  61fc3f12 d1b13232 2ebe36ff 6acecba1 36 has 43430 32310b 30 09060355 04061302
  300b 0603 55040 5553310d has 13 04414c 41 53311430 12060355 0403130b 63612e61
  6c61732e 636f6d82 0100300c 0603551d 13040530 030101ff 300 d 0609 2a 864886
  f70d0101 818100ad 04050003 1d558eab 05d50f7b b656e2c4 213a9ac3 1cecee73
  0251f931 0b47e84f f3c0847e b2168562 d27330b3 72c8023f b83aeb4a 2db8fbf7
  f4575c8e c56300aa 6d5b0fd3 092e7747 76 76286 26e81b3e 4ca35b71 792380b 9
  ca480932 c58a8ee6 2fa62a73 aa1d209d 68662c 59 0b8a71f1 c2db0cbb 5aefc8c5
  bedcbda7 caf46f0c b01def
  quit smoking
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  the Encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 20
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 30
  authentication rsa - sig
  3des encryption
  sha hash
  Group 2
  life 86400
  No encryption isakmp nat-traversal
  crypto ISAKMP ipsec-over-tcp port 10000
  Telnet 0.0.0.0 0.0.0.0 inside
  Telnet 0.0.0.0 0.0.0.0 outdoors
  Telnet timeout 120
  SSH enable ibou
  SSH 0.0.0.0 0.0.0.0 inside
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 60
  Console timeout 0
  management-access inside

  a basic threat threat detection
  threat detection statistics
  a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
  prefer NTP server 192.168.2.116 source inside
  NTP server 192.168.2.117 source inside
  bdavpn1 point of trust SSL outdoors
  WebVPN
  allow outside
  enable SVC
  attributes of Group Policy DfltGrpPolicy
  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
  LtdAdmin XRlF3jA1k3JEhNgr encrypted privilege 15 password username
  domainadmin encrypted E1zLpTPUtBADN9og privilege 15 password username
  tunnel-group sslvpn.domain.com type ipsec-l2l
  sslvpn.domain.com group of tunnel ipsec-attributes
  validation by the peer-id cert
  trust-point bdavpn1
  tunnel-group 101.88.182.189 type ipsec-l2l
  IPSec-attributes tunnel-group 101.88.182.189
  pre-shared-key *.
  tunnel-group 101.1.95.253 type ipsec-l2l
  IPSec-attributes tunnel-group 101.1.95.253
  pre-shared-key *.
  tunnel-Group-map enable rules
  Tunnel-Group-map domainincCertificateMap 10 sslvpn.domain.com
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 10101
  ID-randomization
  ID-incompatibility action log
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  inspect the icmp
  inspect the icmp error
  inspect the amp-ipsec
  !
  global service-policy global_policy
  context of prompt hostname
  Cryptochecksum:a23ada0366576d96bd5c343645521107

  Scott,

  When you check the status of the two tunnels of the CLI, check the following:

  HS cry isa--> of his watch as active or QM_IDLE

  HS cry ips his--> shows the packages encrypted/decrypted

  The second tunnel does not properly come upwards, should ensure that policies correspond to the two ends of the tunnel.

  If this second tunnel is started but does not traffic, we might have a problem NAT or routing.

  Federico.

• Unable to find valid certification path after a 11.1.1.6 to 11.1.1.7 upgrade

  Hello

  I had a composite small deployed in 11.1.1.6 and after I get a upgrade to 11.1.1.7

  javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException:

  PKIX path building failed:

  sun.security.provider.certpath.SunCertPathBuilderException: could not find the path of valid certification for target asked

  This means that my composite soa now cannot validate the certificate of the server it tries to connect to?

  Can someone share ideas on how to fix it?

  Thank you

  Anatoliy

  Hello

  The end point you call is I think a https url?

  If so, did you add the client certificate of this url to your JVM certificate store in 11.1.1.6?

  Is it possible that the JVM uses 11.1.1.7, doesn't have these certificates in the store?

  Try to add this area to the certification path you store of certificates (a certification authority is usually placed in the trust store).

  See you soon,.

  Robert van Molken

• SCSI: 4509: unable to find a path to the vmhba1:0:1 device in good condition. Try the vmhba1:0:1 path

  Hello

  our server gives error for 1 week now:

  SCSI: 4509: unable to find a path to the vmhba1:0:1 device in good condition. Try the vmhba1:0:1 path

  We have already tried updating ESX 3.5 patch 2 Patch 3 = & gt; no results!

  I'm really a noob VMWARE, our expert is on vacation

  other threads that I made these commands:

  esxcfg-mpath - l

  fdisk-l/dev/sda

  vmhba1 esxcfg-rescan

  I don't see any errors these commands of witch

  Please help me!

  Hello

  Your HBA fail no more. If there is a San, I would check to see if there's a cable problem and if so fix the cable, GBIC, card, etc. You wish to study the logs of your SAN network to get better information.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  Blue gears and SearchVMware Pro Articles: http://www.astroarch.com/wiki/index.php/Blog_Roll

  Security Virtualization top of page links: http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links

• ERR-1002 unable to find point item ID 'F145_QUERY' in the application '4000 '.

  Hi all
  
  First, I'll give you an overview:
  APEX version: 3.2.1.00.10
  Version of DB: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
  
  Now the description of the problem:
  I have a region of type report: function return sql_query body.
  After the sql_query is written in a variable, I want to fill an application_item or page_item. The problem is, it returns the error:
  ERR-1002 unable to find point item ID 'F145_QUERY' in the application '4000 '.
  
  After that, I tried to create a stored function (return varchar2, because a sql_query is generated) who got the same structure. Also, I am filling session the question of the application state.
  So I just have the following code in my region to report:
  ------------
  declare
  q varchar2 (30000);
  Start
  q: = function_name;
  Return to q;
  end;
  ----------
  Example of function:
  
  Create function simple_example return varchar2 is
  q varchar2 (30000);
  Start
  q: = 'select sysdate to double. "
  apex_util.set_session_state ('F145_QUERY', q);
  Return to q;
  end;
  ---------------
  But even in this case, I get the error.
  
  Is this a bug? And how can I solve the problem?
  
  Any help is appreciated. Thanks in advance,
  Denise

  My only concern: the if statement will always produce TRUE?

  When running, Yes. Referring to this kind of example:

  if apex_application.get_current_flow_sgid(:APP_ID) = apex_application.get_sgid then -- runtime
  :P9_SQL := vSQL;
  else
  -- design time
  null;
  end if;
  

  .. the idea is that when running the assessment will be always true because the security group will be the ID of the currently running application (get_current_flow_sgid(:APP_ID)) qui, de l'ID de groupe de sécurité définie dans le contexte actuel de la demande (apex_application.get_sgid), whereas in environmental design (Builder), the ID of the currently running application security group will be 10 and apex_application.get_sgid security group ID of your)) workspace.

  Scott

• Error message - unable to find the proxy server - how can I solve this problem

  When I try to enter some sites I get the error message: unable to find the proxy server, Firefox is configured to use a proxy server that is not found. It happened all of a sudden and I don't know why or how I can fix it, it does not help that most help site are blocked. I'm using a Mac 10.5.8 and Firefox 15.

  Set not to use any proxy.

  Firefox> Preferences > Advanced > network > setting > don't score no proxy

• Unable to find the file userChrome.css customization of Firefox. I just installed 20.0.1 firefox browser. You want to disable/remove the navigation bar. Pls Hlp

  Unable to find the file userChrome.css customization of Firefox. I just installed 20.0.1 version of the Firefox browser.
  I want to disable/remove the navigation bar of the browser window, making the browser works like the kiosk mode.

  Help, please

  Thank you
  Vishal.

  your profile folder is a subfolder of C:\Documents and Settings\XXXXXXX\Application Data\Mozilla\Firefox\Profiles\ and something like < randomstring > .default label - folder chrome with the userChrome.css file must go in this folder .default < randomstring > .

• Lost icon of report of trusteer, unable to find an answer on the Web site here.

  I've just updated to Version 6 of Firefox, I lost the Trusteer report icon located on the tool bar, the same thing happened when I downloaded Version 5, I was hoping that my information was still available in my messages Inbox when I logged in Mozilla, but unfortunately he went, I searched the Web Trusteer site and I am unable to find anything.

  Trusteer Support technical report - https://support.mozilla.com/en-US/questions/862201

  We are pleased to inform you that a version of the report that supports Firefox 6 has been released and is now available for download in the following link:

  • http://download.Trusteer.com/NkuiAcruiKc/RapportSetup.exe

  If the report indicates that the version of the report that you are trying to install is older than the version already installed, please follow these instructions:

  • (1) choose uninstall report
  • (2) when you are prompted, select 'delete all user settings '. Please, assisted by the following image - http://consumers.trusteer.com/files/images/uninstall.jpg
  • (3) reinstall report from the link above

  Check and tell if its working.

• Satellite Pro L20 - I need a new screen and I am unable to find a part number

  Hi all

  My L20 Pro Satt needs a new screen and I am unable to find a screen with number of part corresponding to mine.

  Can anyone provide me with the other part numbers that would fit mine.

  Thank you

  I found only a display for a Satellite L25 Pro but I guess that the two devices are very similar and use the same part of the screen.
  The display part number is K000000620 and it s a 15 XGA 1024 x 768 display.
  http://www.screentekinc.com/Toshiba_Satellite_Pro_L25--15-inch--1024x768-XGA-laptop-LCD-screen.shtml

  You also can order the compatible display. You can contact the partner of service allowed in your country to order this part.
  But be aware that the display is one of the most expensive parts of laptop.

• Installed Windows 7 on my HP Compaq nw8440 but unable to find the drivers that only Vista drivers are ther

  I just install Window 7 Home Basic Edition as final Version was my HP Compaq nw8440 too slow. After installation, I am unable to find the drivers and all drivers available for Windows Vista. No driver VGA, No Finger Print etc. And the Internet is also working slowly well my connection giving the same speed. Please help me

  You are the very welcome.

  I do not take up that simple...

  Try the driver windows 7 for her at the link below and you will need the W7 software protect tools because I do not think the Vista software works.  Ditto for the quick launch buttons.

  These drivers have been extracted from the 6910p who was the first series HP business notebook, support for windows 7 and the one that follows in the line after the nc6400 (the 14.1 "model of your screen).

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-66699-1&prodTypeId=321957&prodSeriesId=1839152

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3357377&prodNameId=3357378&swEnvOID=4053&swLang=13&taskId=135&swItem=ob-78740-1&mode=3

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3357377&prodNameId=3357378&swEnvOID=4053&swLang=13&mode=2&taskId=135&swItem=ob-77198-1

  Paul

• Why is-Visa Interactive Control unable to find or load the visa library

  I'm using LabVIEW 8.5.1.  I recently installed driver VISA tektronix to connect with one of their products.  That has proved to be a bad idea.  I've uninstalled it one then installed VISA460, but when I try to write a labVIEW driver that communicates via RS232 or USB, I get this error:

  LabVIEW: (Hex 0xBFFF009E) VISA or a library of code required by VISA impossible situated loaded.  This is usually due to a required driver is not installed on the system.
  =========================
  VISA: (Hex 0xBFFF009E) a code library required by VISA impossible located or loaded.

  When you try to run an interactive control Visa I get an error saying unable to find or load the visa library.  Is there anything else I need to download?  Any help would be great. Thank you.

  I had already done this, but had no luck.  However, I could be back up and running using Msiblast.  This is a great little program.  So, if anyone has problems in the future, simply download Msiblast and delete everything has VISA inside and then run the Setup program OR Visa.  Thanks for the help.

• Get error saying: a necessary file to your aol desktop software work properly (snmaster.idx) unable to find to fix this problem.

  Original title: installing the aol software

  I uninstalled some older versions of AOL, now I can not open aol. Get error saying: a necessary file to your aol desktop software work properly (snmaster.idx) unable to find to fix this problem. Please reinstall the desktop aol PFC snmaster.idx problem is I don't know how to install this software!  Help

  Hi Bruce,.

  Thanks for posting your question in the Microsoft Community Forum.

  Based on the information, you receive the error message error message to reinstall the AOL software to fix file snmaster.idx missing after uninstalling older versions of AOL.

  This problem may occur if some data for AOL Desktop Software files are not installed in the correct location.

  You can see the AOL support article to install the AOL desktop software.

  Install AOL Desktop software

  You can also consult the support AOL article and check if it helps.

  Message: SNMaster.idx is missing

  If the problem persists, you can get in touch with the support of AOL for further assistance.

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.