ERR-1002 unable to find point item ID 'F145_QUERY' in the application '4000 '.

Similar Questions

• Error ERR-1002 unable to find item for the 'ID' element ID in the application

  Hello world
  
  I'm new to APEX and I came across this error for the first time. I have a page with a classic report in it, and I want to create a link to one of the columns in the report (column ID) to another page with a classic report in it. So when I click on, say, ID 118, I want to be sent to another page and don't see ID 118 information.
  After you create the link in the column, I get the error message when I run the application:
  
  Error ERR-1002 unable to find item for the 'ID' element ID in the application
  
  I tried to create a link from one report to the other before and it worked fine.
  
  Thank you!
  
  P.S. I use APEX 3.2

  Then you must create an item called ID on your page 2 (hidden make) and the link will pass the value of the ID of the line picked up on this hidden item. Now in page 2 make your report filter query on id = P2_ID or another name that you use...

  Hope this helps,
  His

• Unable to find IBM DB2 400 KMs in the new installation of 12 ODI...

  Hello ODI Experts.

  I was unable to find Knowledge IBM DB2 400 Modules in my new installation of 12 ODI. I missed something? I can see clearly that oracle has listed these knowledge modules in their documentation.

  http://docs.Oracle.com/middleware/1212/ODI/ODIKM/DB2.htm.

  Thank you

  Hello

  It IS that your version of 12 c ODI is 12.1.2.0.0, if yes, you must apply a Patch 17836908 on top of ODI 12.1.2.0.0 12 c and it will add the missed KM related to DB2/400 technology and more during the ODI version 12 c will increase from 12.1.2.0.0 to 12.1.2.0.1

  Hope this can help you

  Kind regards

  Phanikanth

• Too many items to menu in the application will result in failure project packaging

  Hi all

  I have a problem in my application when the number of the menu in the application items exceeded a certain number of the packaging project fails.

  When I tried to the bottling of the project in eclipse, an error message was the result:

  I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified
  Packaging project Myproject failed (taken 6,391 seconds)

  But when I remove one menu item package succeeded.

  What could be wrong.

  Thanks in advance.

  Thank God,

  I found the solution:

  I'm not sure but I think becaue I use (Blackberry JRE 5) so I need JDK 6 more to update 20.

  But what makes issue resolved that:

  I installed (JDK 6 update 21) and put the path to the bin folder in environment variables.

  Here is the link to download (JDK 6 update 21):

  http://download.Java.NET/jdk6/6u21/promoted/b05/binaries/JDK-6u21-EA-bin-b05-Windows-i586-29_may_201...

  To add the environment variable:

  Right click on my computer > properties > advanced > environment variables:

  system variables:

  Double click PATH, and then add the path to the bin folder (can be like this: "C:\Program Files\Java\jdk1.6.0_21\bin")

  I hope this will help one.

• Unable to complete step 2 (icon drag in the applications folder) when upgrading Firefox

  I'm going through Firefox 3.6.11 to 3.6.12.

  Step 2 of the process says "drag the Firefox icon in your applications icon.

  First problem: I do not have an icon of applications. Second problem, being creative I open Finder on my Mac and try to drag the Firefox icon in the applications folder. Will not work. Shows that I have Firefox 3.6.11 so I can't after step 2.

  The second problem is that the download with the three steps screen constantly fills the screen. So there is nowhere to display an icon requests drag the Firefox icon in. Whenever I click on the icon in step 2, the screen optimizes and covers nothing under it.

  Any suggestions?

  https://support.Mozilla.com/en-us/questions/761616

• VP1 is unable to connect to Data Mover not at the Application Designer

  Hello
  On 8; 42; 15 tools on a win 2003 server, DB oracle 9i:
  SYSADM can connect via Data Mover, but VP1 can not:
  Invalid user ID and password for the access code.
  
  I don't know password. I've updated with encryption = 0 and password and as sysadm run:
  
  encrypt_password *;
  
  in Data Mover.
  Also:
  SQL > select acctlock from the sysadm.psoprdefn where oprid = 'VP1 ";
  
  ACCTLOCK
  ----------
  0
  
  What else to check.
  
  For the moment unable to connect via the application designer. With the same error message.
  Thanks for the help.

  Have you set the connectid and the connectid Word both in configuration manager (pscfg.exe)?
  Are you able to connect to the database with the people of the user? And be connected with people, able to interview PSSTATUS, PSACCESSPRFL, and PSOPRDEFN (prefixed by the name of the owner of the tables)?
  PS user exist? Is there a table PSDBOWNER containing the name of the database?

  Nicolas.

• 'Unable to Find' OJ Pro 8600 Premium on the wireless network

  Network: Router NetGear 3400, WEP 64-bit + computer Dell laptop + Officejet Pro 8600 Premium N911n, HPC782FE.  Vista 32 - bit OS.  New printer installation, wireless connection to the wireless internet router.  Test results of the wireless network said successful wireless wireless wireless printer installation works, connected, SSID found, the printer settings compatible with the configuration of the wireless router.  Network status says HP Network Configuration page is ready, Active connection Type is wireless, 802.11 Wireless status is connected.

  I can send HPeprint to the computer through the router, and it comes back through the router to the printer when it prints.  But I can't print directly from the computer to the printer, even if the two seem to be connected to the network via the same router.  I'm puzzled.

  When I press the icon on the screen of the printer wireless, it says connected, IP: 192.168.1.105 (I put manually after having read several problem Q & as), with the correct network name and MAC, with a strong signal.  When I click on "I can see that the status is logged on and the intensity of the signal" and then enter the IP 192.168.1.105 and then click Next, the search for a printer "Can't find printer" product and I'm back where I started.  When I jump to the next page and finally get to the HP Print and Scan of doctor, he is unable to identify or fix the problem.

  Hi Allen73,

  There seems to be some problems with the configuration of the network configuration. Please call our technical support to the 800-474-6836 if you're ok with it, they can log on to your computer and take a look to see what settings need to be corrected. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• FRM-41045: cannot find point: invalid ID (what is the ID?)

  Hello!
  When the forms run:

  go_item('<block_name>.<item_name>');

  and there is no element in this block is the FRM-41045 error appears. Is it possible to discover this "invalid ID"?
  Forge this information be useful to find the block of code as a result of this error.
  
  Thanks in advance,
  Sandrine

  Sandrine says:
  Hello!
  When the forms run:

  go_item('.');
  

  and there is no element in this block is the FRM-41045 error appears. Is it possible to discover this "invalid ID"?
  Forge this information be useful to find the block of code as a result of this error.

  Thanks in advance,
  Sandrine

  You can "solve" in form by name or by the ID. The ID of an element can be retrieved by FIND_ITEM.
  That forms is not the name of the element in a 41045 has always been a PITA.
  I recommend that you just wrap each GO_ITEM in another procedure, where you
  .) try to find the item
  .) trigger an error message with the name of the element
  If the item doesn't exist.

• Unable to find certificate to log on to the network

  Well guys, I see that it is a problem that has been lingering for a while and I see that several people have described situations similar to mine, but so far I have not found anything to fix the problem if this annoying box is unchecked.
  But fundamentally, our situation is as follows. We have a router that we all used without problems for more than six months on the four different laptops and a desktop computer. Two months ago the internet provider cut internet, but the router was plugged left. We have been able to access the router connection without problem. Then, last night, we got the internet hooked up again. I was able to connect to the router with my Toshiba laptop (Windows 7) and HP (Windows Vista) office, a roommate was able to connect with his Mac laptop (hell if I know what OS), but our other roommate is to get this identity validation / can not find the certificate on his Toshiba laptop (Windows XP). He followed the directions given and when it gets to the last statement, the box is unchecked and highlighted so that you can't do anything to change it anyway. It can connect to other signals, but not our home signal, which we left unsecured while we try to understand this. Help someone? We are open to suggestions here.

  Well guys, I see that it is a problem that has been lingering for a while and I see that several people have described situations similar to mine, but so far I have not found anything to fix the problem if this annoying box is unchecked.
  But fundamentally, our situation is as follows. We have a router that we all used without problems for more than six months on the four different laptops and a desktop computer. Two months ago the internet provider cut internet, but the router was plugged left. We have been able to access the router connection without problem. Then, last night, we got the internet hooked up again. I was able to connect to the router with my Toshiba laptop (Windows 7) and HP (Windows Vista) office, a roommate was able to connect with his Mac laptop (hell if I know what OS), but our other roommate is to get this identity validation / can not find the certificate on his Toshiba laptop (Windows XP). He followed the directions given and when it gets to the last statement, the box is unchecked and highlighted so that you can't do anything to change it anyway. It can connect to other signals, but not our home signal, which we left unsecured while we try to understand this. Help someone? We are open to suggestions here.

  What are the directions have been followed?  What is "the last statement?

  Do you mean the box for "enable authentication IEEE 802. 1 x for this network?  And what do you mean by ' underlined so you can't do anything to change it?  Do you mean that it is grayed out (see this screenshot:http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Connections/Wireless_Network_Connection/Properties/Wireless_Networks/Properties/Authentication.shtml )?

  Delete the entry for the network entirely and start over:

  1. Open network connections (start > run > ncpa.cpl > OK)
  2. Right click on the wireless adapter icon and select Properties
  3. Click the "Wireless Networks" tab.
  4. In the list of "Preferred networks", look for the entry of your router, select it and click on the button Delete.  While you're here, you can as well delete the entries for other networks that you do not use.
  5. OK your way out
  6. Now, go to view wireless networks or view available networks, find your network and click on connect.

• I'm trying to connect to internet, but get an error saying "Windows is unable to find certificate to log on to the network."

  I'm unable to access the internet.  I am told there is no connectivity or a metered connection.

  Hello

  You have a wireless connection?

  Follow these steps and check if it solves the problem:

  a. click the wireless in your bar tasks and under related tasks, click Change advanced settings.
  b. now click the wireless networks tab and select the network in the list below. Click properties when you select the wireless network that has issues.
  c. click the Authentication tab and now uncheck 802 authentication. 1 x activate IEEE for this network box.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Unable to find a way to talk to the media, support for the company does not recognize my product number

  My product is under warranty, but when I'm logged in, the web site says the PN and SN is not recognized. Cat don't go beyond that point.  Someone knows how to chat with support from HP on a LA2205WG monitor?

  Too late, called tech support by phone and got replaced unit.

• ERR-1002 cannot find the item for the item ID

  I have a button on page 111 of my application that, when you press on, redirects to P120 and sets 2 elements in this page the value in a number of permit numbers on P111. But when I click on the button, I get the error message:
  
  ERR-1002 error unable to find the point item ID 'P120_PERMIT_NUMBER_FOR_RANGE' in the application...
  
  I am sure that the name of the element in the 120 page is "P120_PERMIT_NUMBER_FOR_RANGE".
  
  So what's the problem? Thank you.

  is it because you have a space after the comma before the name of the element?

  Gus...

• ERR-1002 cannot find the item for the item ID "SESSION".

  Hi all
  
  We recently ugpraded Aoex 3.1 to 3.2 and have noticed now times that I get the following error when connecting...
  
  

  Unexpected error, unable to find item name at application or page level.
  
  
  ERR-1002 Unable to find item ID for item "SESSION" in application "2500".
  
  Return to application.

  I have made changes to the application, but have not changed anything to with the MEETING point, I thought that was built in APEX so am not sure why it does not.
  
  The error occurs especially if I empty the internet cache and try to connect again on a new session, I click back to the Application and try to connect again, but the error. If I connect under a different name, it connects.
  
  This happened to someone else?
  
  Thank you
  
  Graham

  Ah-Ah!

  INSERT INTO M_USERS_HISTORY (m_users_history_note, created_by, m_user_num, date_created)
  VALUES (V_User_Id, 'User' | upper(:P101_USERNAME) |) ' connected to the session: ' |
  : SESSION | ' - IP address: '. owa_util.get_cgi_env ('REMOTE_ADDR'),
  (: P101_USERNAME, sysdate);

  Change: SESSION v ('APP_SESSION') there too.

  Scott

• Cannot find creative cloud on MAC after the installation process is completed.

  I installed creative cloud, but could not find it on my MAC after its installation process.

  Does anyone have the solution to this problem?

  Hello

  Please check the Applications folder in the folder Adobe Creative cloud.

  In the case where you are unable to find it, please try to download the installer according to the suggestion provided by Justin.

  Kind regards

  Sheena

• startup error: unable to find: gmsapns.dll c:\windows\

  Original title: start-up to receive a message that windows can not find: gmsapns.dll c:\windows\

  Need to recover these files

  You might think differently after reading this:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.

  A Google search generates no good reputation hits making the file name even more suspicious.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it
  .  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.