JDeveloper 12.2.1 - Directory Service is not valid

Similar Questions

• When I try to find a LAN printer "directory service is not available" error appeas in XP

  My laptop computer, an IBM T43, works in a room separate from the printer. The printer, a HP Photosmart C6180, is connected by a CAT5 cable to the wireless router, a Linksys WRT54G.  When the laptop is connected to the printer with a USB cable, it finds the printer and print. When he tries to print via the wireless network, it can not find a printer. When he tries to find the printer it gives the error "the directory service is currently unavailable." Nothing seems to go beyond this error. Efforts have been made through the administrative account.

  It has been my experience that it is usually easier to install HP network printers using the HP software by running the windows "Add Printer Wizard."  This is especially true for all-in-one devices like your C6100.

  The icon of the printer that you have (if you have not deleted) is the installation of a direct USB connection.

  If the printer is connected to a point over the network, the correct port is perhaps still.  Select the properties of the printer as before and open the Ports tab.  Is there a line for which the middle ('Description') column is "HP Standard TCP/IP Port" or "Standard TCP/IP Port"?  If so, put a check mark in the box and now you'll be able to click on the button 'Configure the Port' and get the IP address to match the one configured in the printer (192.168.1.104).  Note that checking the box for a new port as it unplug the printer from printing to the USB port.

  If no "HP Standard TCP/IP Port" or "Standard TCP/IP Port" is listed, you will need to go through the installation process to get it.  Although this can be done manually (if Windows knows your printer, which is doubtful for a C6100), as I wrote above, it is much easier to do using the HP software.  See pages 12 and 21-21 of your User Guide.  You must remove the USB connection, as suggested in step 4 of the instructions if you think you might use this connection at any given time.

  If you do not have the CD that came with the printer, you can download the necessary software here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=1153494#N191 the package is large enough.  It's not not clear to me if the "basic print and scan" driver package can support a network installation.  The 'Corporate' bundle only if you do not want to download the complete collection of applications.  However, again based on my experience with the HP software, you might find more easy with the "Full Feature" package installation - if you can put up with the large download.

• ORA-39087: directory name is not valid...

  Oracle 11.2.0.4 SE a 64-bit

  Windows 2012

  Overall the project is to move the database from 32 bit Windows 2008 to 64 - bit Windows 2012

  Habitable expdp/impdp using pre-created new database of selected patterns.

  Movement patterns is works very well but problem with certain follow-up activities.

  One of the scripts (.cmd file) to move running expdp on selected patterns.  On execution, it returns

  Connected to: Oracle Database 11 g Release 11.2.0.4.0 - 64 bit Production

  ORA-39002: invalid operation

  ORA-39070: unable to open the log file.

  ORA-39087: directory DPUMP_SCHEMA name is invalid

  The directory in the db object exists:

  SQL > select * from dba_directories where directory_name = "DPUMP_SCHEMA";

  OWNER DIRECTORY_NAME DIRECTORY_PATH

  ---------- ------------------------------ ------------------------------

  SYS DPUMP_SCHEMA G:\orcl\dpump

  And if the specified directory does not exist:

  SQL > host dir G:\orcl\dpump

  Volume in drive G is Oracle and Archlogs backup

  Volume serial number is 1C9C-1F4D

  Directory of G:\orcl\dpump

  2015/12/16 10:00 < DIR >.

  2015/12/16 10:00 < DIR >...

  0 file (s) on 0 bytes

  2 dir 108,017,045,504 bytes free

  As far as I can tell the only thing not taken into account is possibly permissions on the directory.  Looking at the, they APPEAR to be good, but we are dealing with Windows here, and permissions under Windows have always been somewhat a mystery to me.

  FWIW, there is also a "G:\orcl\rman" directory where rman backups and logs of TIME to go, and there is no problem with these jobs.  I can find no distinction between the permissions on g:\orcl\rman and g:\orcl\dpump, but once again, with the safety of Windows, I don't know what I was looking for.

  The database software was installed by a domain account (< domain > \OraAdmin) and all of these directories are created by the same account.  This domain account is a member of the local Administrators group.

  Hi Ed,

  Sorry for asking it - I knew that you would have given all subsidies on this directory (can you tour more check - just in case).

  I hope that you perform expdp with system user - according to the standard (in the case of the owner of the respective schemas - privs are granted/assigned)

  Do you use service_name in your expdp by chance?

  Can you share expdp statement - just in case (sorry to ask)

  Update:

  Under windows you can try DATA_PUMP_DIR = - his case set

  -Pavan Kumar N

• Active Directory Service disabled

  Hello

  I just installed Windows Server 2012. After you have added the DNS and Active Directory functions/roles on the server, I noticed that the Active Directory service is not running, but it is disabled. When I try to start the service, I get the error - The Active Directory Domain Services service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  Any ideas what could cause this?

  Hello

  To improve assistance regarding this issue, it would be better to post in the Microsoft TechNet forum.

  https://social.technet.Microsoft.com/forums/en-us/home

  Thank you

  Legaede

• Active directory domain services is not available. -What it means and how to fix it?

  When I try to print something I get an error message stating, "Active directory domain services is not available.

  Hello

  Your question would be better suited in a crowd of professionals IT at Technet-Directory Services. Please repost your question here for learn more concentrated help.

• Active Directory domain services is not available. How can I recover it back on line

  Dear all,

  I did a format on my drive and after that I installed Vista Business and office 2007. I installed a local and a net printer and everything was perfect until I went looking in the file to find in print a 2007 office file options. The message was "the Active Directory Domain Services is not available. I red how to get back to the work of the administrative tools but I cannot fins it it. In my view, which is simply stopped working. Can someone tell me can hoe I can put it back to work. It seems that it is a lttle lazy and want back tay and relax.

  Best regards and thanks for your time.

  Christos.

  Hey Christos,

  Your question of Windows is more complex than what is generally answered in the answers from Microsoft Windows Vista forums. It is better suited for the IT Pro TechNet public. Please ask a question in theTechNet Forums.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Print Spooler service is not running, or active directory domain services is currently unavailable.

  Original title: my printers on WIndows 7 seemed to have disappeared...

  Printers are not listed for printing set up in Word, Notepad, Adobe, etc., when I try to add a printer, he said the local print spooler service is not running, or domain services active directory is currently unavailable.  Printers are shown on the list of devices, and when I run the troubleshooting it says that the print spooler problem is solved.  but I still can't print.  The question is on a laptop Samsung bought in store Microsoft to OakBrook, Illinois.

  It started on 8 July and I was not able to resolve since.  In reviewing the restore points, I don't see any problems, and printers are recorded in the other PC, I plugged in.

  Thanks for your help.

  Imran,

  Thank you very much for the reply onse.  I appreciate it.  I tried your suggestions and everything in the fix he said that the print spooler has been repaired, it would not print.  I ran the scanner and came without any problem.

  I did a restore of the system to a point prior to the issuance and the printers are busy, apparently something in an update has a problem.  I'll look next week and see what happens.

  Thanks again for your reply and your suggestions, I appreciate it.

• Directory services cannot start SBS2003 lsass.exe error?

  Hi all

  I have a SBS 2003 server who gave a customer who seems not to start windows.
  It gives 0xc000007a error code (Directory Services cannot start because the specified procedure could not be found).
  After finally the local Windows password reset, I am now faced with another problem, how to solve the problem I have for the first time to the difficulty.

  I've done some commands listed on the Microsoft article http://support.microsoft.com/kb/258062, nothing helped.

  I've already run the disk check, but it is impossible to run a repair on the installation because it shows the same error

  Does anyone know how to get the server to start successfully, without the need to reinstall Windows?

  System Spec: -.
  2 x Intel Xeon processors
  4 GB of DDR2 memory
  company 3x250GB WD HDD (Raid 5 with parity)
  Quantum Ultrium 2 tape drive

  Hello

  Thanks for your quick response to my post. I recently decided to reinstall the OS due to time constraints,

  Thank you

• Error - the Directory Service is currently unavailable for printers in Windows XP.

  Original title: "the Directory Service is currently unavailable.

  Help!

  There isn't too much information on this from what I see.

  How to fix error 'The Directory Service is currently unavailable' on a local network by clicking Find > for printers

  It is not related, as I connected with my profile and it's the same mistake to profile.

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Hope the helps of information.

• Why Windows Update service does not work on my computer?

  After a few months of not be used, my Toshiba Satellite L35 (Windows Vista Home Basic; Computer laptop Service Pack 2) can not access Microsoft Updates.  Whenever I try, I get a message "the service is not running" and tells me to restart, I did several times without success.  Norton 360, and Spybot, indicates no problems.

  It's like something has removed or disconnected from all the Windows Update process.  "Update history" produces a blank page.

  After a few months of not be used, my Toshiba Satellite L35 (Windows Vista Home Basic; Computer laptop Service Pack 2) can not access Microsoft Updates.  Whenever I try, I get a message "the service is not running" and tells me to restart, I did several times without success.  Norton 360, and Spybot, indicates no problems.

  It's like something has removed or disconnected from all the Windows Update process.  "Update history" produces a blank page.

  Suggestion 1: Get rid of Norton and Spybot Search and Destroy.  I do not recommend Norton/McAfee products, especially the suites (I recommend NO suites - simple is better.)  Spybot has been a good product, but a few years back, he just stopped doing as well.

  Suggestion 2 (cumulative, not necessarily independent - but maybe): cleaning of your Windows Update stuff...

  All the following items in the order shown - no matter what protection against that, you think you have.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to get updates.

  If it still does not work, try this...

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  3. Reset
  4. Try to reinstall updates

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

  STILL no?

  Use this FixIt:
  How to get the latest version of the Windows Update Agent

  Reset.

  Save components WU:

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     regsvr32 Jscript.dll
     regsvr32 c:\windows\system32\wuapi.dll
  
  regsvr32 c:\windows\system32\wuaueng.dll

  Reset.

  Try updates.

  If it still does not work after this - say parts of the former post once again (no need to conduct a new analysis of malware) from:

  "Now reset your Windows with this FixIt components update:

  ... but stopping at... «STILL no?'.»»

  Back - let everyone know what is happening.

• Error: Windows Update cannot enabled updates, because the service is not running.

  Original title: update for windows vista.

  Windows Update is not enabled updates, because the service is not running.

  I spent all day trying to update via different methods on different for one without a bit of luck.

  Can anyone help?

  Windows Update is not enabled updates, because the service is not running.

  I spent all day trying to update via different methods on different for one without a bit of luck.

  Can anyone help?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Delete everything is found.

  Reset.

  Get the tool system update (save) for your architecture system and do a right click on it and "Run as Administrator". Choose the right one for you:

  • All supported x 86 Windows Vista (32-bit) versions
  • All supported based on x 64 (64-bit) versions of Windows Vista

  Let things run/fix.

  Reset.

  Try to update.

  If it still fails, try the following:

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  If it still does not work, try this...

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  3. Reset
  4. Try to update.

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

  
  STILL no? We have something to try...

  Use this FixIt:
  How to get the latest version of the Windows Update Agent

  Reset.

  Save components WU:

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:

     regsvr32 Jscript.dll
     regsvr32 c:\windows\system32\wuapi.dll
     regsvr32 c:\windows\system32\wuaueng.dll

  Reset.

  Try to update.

  If it still does not work after that - repeat ONCE more that part...

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  Come back and let everyone know how you faired.

• Windows Search service does not (Windows 7)

  I am running Windows 7 64 bit.
  Whenever I try to search that I am asked to turn on indexing, and I do.
  Because it is a recurring event, I studied further in indexing options.
  Indexing options said "indexing does not work" and and only allows me to enter the advanced options.
  Automatic troubleshooting futher gives me error measage "Windows Search service does not..." "Not fixed".
  I checked the services and tried to force start this service and get "error 3: the system cannot find the path specified."

  Can someone help me with this service?

  Security of Windows 7 is a PIA and what my problem was. "Indexing does not' and my inability to start theWindows Search service has persisted despite all these tips above and much more.

  When I went to C:\ProgramData\Microsoft\Search\Data and took possession of it (http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/), I was able to restart the Windows Searchservice. Subsequently, indexing ran and worked.

  We need the value of the securities of the ProgramData (C:\ProgramData) directory in order to stop this _ to interfere with the installation of programs and, often, the execution of programs and services. Right-click on C:\ProgramData and select Security, then the set of permissions to allow all permissions (http://www.blogsdna.com/2159/how-to-take-ownership-grant-permissions-to-access-files-folder-in-windows-7.htm) and the problem disappeared. (Note C:\ must be path of your window or use your default root.)

  Thank you Microsoft Support for your irrational, frustrating security measures and the fact that your support team has no idea. You have not been able to write a user friendly OS from XP and probably since MSDOS. Too bad I hate Apple more than you.

  6 hours of BS to understand this.

  I hope it works for you.

• No prompt connection at the connection, only the directory service repair mode works

  I have window 7 and there was an automatic update that took place last night. 15 updates I think. This morning when I have time to connect, everything seems normal. When I click on my icon to enable the password prompt to appear, instead the icon disappeared a moment then reappeared with no password. I tried to fix it, I run into all the different security modes, etc., but nothing works, I can't get the password prompt to appear. Any ideas?

  Update: I was able to get through "directory service repair mode. I have not to do anything more until I get more information.

  Hello

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the issue.

  This problem can occur either due to start-up files Windows corrupted or if the master boot record and boot sector is damaged.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Startup Repair to do it and check.
  Refer to this article:
  What are the system recovery options in Windows?
  http://Windows.Microsoft.com/en-us/Windows/what-are-system-recovery-options#what-are-system-recovery-options=Windows-7

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  Use Bootrec.exe in the WINRE to resolve startup problems
  https://support.Microsoft.com/en-us/KB/927392

  Note: You may need another installation of Windows 7 DVD. You must also change the priority of boot on DVD in the BIOS settings of your computer to boot from DVD.

  Important: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• 4.2 ACS services does not

  The server is running Windows 2003 SP2 and due to a problem it has restarted. After you restart all services stopped working.

  CSAdmin, CSMon, and CSRadius hanging in State and case of departure in shutdown state. When I program the startuptype manual and began these services

  I got "failed to start the CSAdmin service on Local computer. Error 1053, that service has not responded to the application launch or control in a timely. "

  For the service case, it gives the error message "the service of cases on Local computer started and then stopped. Some service automatically stop if they

  "no work to do, for example, the service logs and alerts.

  In the eventviewer it shows "the description for the event (1) in Source (CiscoAAA) ID is not found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: CSAdmin, cannot initialize SchemeLayer, 74. »

  While the automatic startup type event viewer displays error below.

  "The description for the event (1) in Source (acs) ID is not found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: * ERROR * failed Assertion: 103401 (9.0.0.1271)

  Could not open the file (C:\Program Files\CiscoSecure ACS v4.2\CSDB\acs.db) who previously opened successfully; error = 32. the description for the event (1) in Source (acs) ID was not found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: * ERROR * failed Assertion: 103401 (9.0.0.1271)
  Could not open the file (C:\Program Files\CiscoSecure ACS v4.2\CSDB\acs.db) who previously opened successfully; error = 32. »

  Please help me solve this problem.

  Thank you

  Since we had no access to the ACS server. We tried to take backup of csutil but there was the schemalayer error message. As we stopped AV, logs files removed from the directory, killed services stuck from the Task Manager and restarting the server. If it's still not allowing you to restart services, most likely you need to take backup, uninstall the ACS server and reinstall the same version of ACS, followed by restore.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Windows Diagnostics policy service does not

  Windows Diagnostics policy service does not

  Original title: Network wireless adapter NIC Ethernet network device

  Hello

  • What were the changes made before the problem occurred?
  • When you receive this error message?

  I suggest you try the given steps and check if it helps

  Method 1: Try the steps from the link below

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=Tab03

  Method 2: Try to restore the Transmission Control Protocol / Internet Protocol (TCP/IP).

  The reset command is available in the IP of the utility of Word context. Follow these steps to use the reset command to reset TCP/IP manually:

  1. to open a command prompt, click Start, click Run. Copy and paste (or type) that follows the command in the Open box, and then press ENTER: cmd

  2. at the command prompt, copy and paste (or type) the following command and then press ENTER:
  netsh int ip reset c:\resetlog.txt

  Note: If you do not specify a path of the directory for the log file, use the following command:

  netsh int ip reset resetlog.txt

  3. restart the computer.

  Change TCP/IP settings

  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings

  Method 3: If this does not work, uninstall and reinstall the network adapter

  To uninstall the drivers follow the steps below

  1. click on start, type device manager in the start search box and press ENTER. Click on continue. The Device Manager dialog box appears. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the list of device types, expand network adapters, and then look for the specific device.
  3. right click on the device and then click Properties.
  4. click on the driver tab.
  5. click on uninstall.
  6. click on OK.

  Restart the computer, the default drivers would be installed.