JDeveloper debug: start the automatic extension debugging session

Similar Questions

• Whenever I start the computer I lost the wireless capability. I get error WZC "871122". I then start the automatic Wireless Configuration service. Is there something I can do if I can't do it every time that this?

  Continually 871122 WZC error.

  Hi Shane,

  Looks like you have (or had) 3rd party software that previously managed your wireless connections, so casting service windows does not start automatically.

  See the following Article in the Microsoft KB, see if it suits it for you;

  http://support.Microsoft.com/default.aspx/KB/871122

  More precisely:

  If your computer or your wireless network card came with its own wireless network software, follow these steps:

  1. Click Start, click run, type ncpa.cpl and click OK.
  2. Click on network connections.
  3. In network connections, select your wireless connection, and then click change settings of this connection.
  4. On the wireless networks tab, click to select the Use Windows to configure my wireless network checkbox.

  To start the automatic Wireless Configuration service, follow these steps:

  1. Click Start, click run, type %SystemRoot%\system32\services.msc/s, and then click OK.
  2. Double-click Wireless Zero Configuration.
  3. In the list of Startup type , click Automatic, and then click apply.
  4. In the Service status area, click Start, and then click OK.

  Let me know how you go.

• Cannot display networks wireless range... impossible to start the Automatic Configuration service

  My wireless card says it works correctly, but when I try to choose a network I get "Windows cannot configure this wireless connection" and I'm not smart enough to understand how to start the automatic configuration service.

  Hello

  If there is no 3rd party utility running (as mentioned by Steve), or you disabled loan and lost WZC.

  Maybe this can help, http://www.ezlan.net/wzc.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Whenever I want to connect to a wireless connection, I have to manually start the automatic configuration service every time.

  always when I start windows was not detected my wireless network, I should start the WZC repair whenever detection networks and my connection, I have configured this Service aoutomatic but she never starts aoutomatically and I should start it up manually... can help me to solve my problem with my wireless connection?

  My OS: windows xp sp3 and I use Dell Vostro1520

  original title: wireless connection problem

  I GOT THE SOLUTION OF MY PROBLEM:

  1. right-click on my wireless connection click on -> status
  2. in the window on the general tab, I click on the -> properties button
  3. in the open window in the general tab I click the button -> Configure...
  4. in the open window, I go to the tab Advanced to->
  5. in the ->property: box, I select the element -> WZC managed Ethernet
  6. in the box -> value I selects the item -> Enabled
  7. I click the button OK to-> .

  NOW MY WZC SERVICE IS AOUTOMATICALLY BEGINS AT THE START OF MY WINDOWS.

• Start the automatic timed computer

  My computer is very slow to start, so I would like it to automatically start at 06:00 so it will be ready between 6:30 when the markets open.  I can't locate the place in the control panel to enable this setting.

  Hans

  http://www.ehow.com/how_4914722_set-auto-start-up-computer.html If this post answers your question, click mark as answer .

• Windows could not start error 1068: dependency or group was able to start the automatic configuration of WLAN set the local computer.

  I am not able to start some services to get connected wireless.  In Device Manager the poster adapter works correctly.  The WIFI light is on.  Start Windows Wireless Service bar lights up, but the service does not just start.  I have run chkdsk and several other parts but registry cleaners I keep coming up empty.  Help, please.

  I've been sarching for hours and hours... and it's already after hours of working offline with the client in their home... no restoration of the system or the backups... typical noob... but not their fault it happened... I did EVERYTHING suggested. Nothing has worked... Almost abandoned and prepared for a re - install... then I found it at the last second...

  «OMG 911techmedics...» You're crazy GENIUS!

  Finally, something works and does not require a complete reinstall of the OS. I was so scared of it because Asus does not save a physical copy of the Recovery Manager on the hard drive, and somehow my backup discs (6 disks, waste of my DVD: O) don't work at all after spending an hour by burning.

  What happened was I used RegTweaker to do a cleaning of registry on my Win7, my computer worked faster, but I lost my WLan service and no matter what I was doing nothing worked, until I stumbled upon your post! I have read more than 50 pages of Web/forum sites and tried probably suggested and none of them worked.

  I tried:

  (1) Microsoft Winsock32 Fix
  (2) replacing Winsock dll
  (3) Yes Netsh wlan with the set command
  (4) order of Netsh reset catalog
  (5) LSP Fix.exe
  (6) right click 'Manage' on computer and everything related to the WLAN + dependencies on "automatic".

  I spent 8 hours and none of the above worked. Apparently a lot of people have the same problem after using a registry cleaner. He has tried, tested and proven. I did the registry cleaning on 2 computers and next thing I know on reboot, it is that the WLAN Service went AWOL. My first suspicion is gone to a missing or corrupted Winsock, but I never thought that a simple change of 2 files in the registry would solve the problem. Your piece of text was scary to look at in the beginning, but I was so desperate that I was willing to try anything and it really paid off. Microsoft should pay you the man! Their stupid suggestions do not work. For those who like me, I break down the instructions for you:

  Step 1: Click the button START
  Step 2: In the search box, type "regedt32" (of course, do not include the ""), right-click on the result of the research and the "Run as Administrator".

  Step 3: Click 'HKEY_LOCAL_MACHINE', should extend out to a list of things
  Step 4: Next, choose 'SYSTEM', is expected to increase again
  Step 5: Choose "CurrentControlSet", develops again
  Step 6: Select 'Services', develops into a great big list of things

  Step 7: Click on "Dhcp", the right window shows the files in this folder
  Step 8: Double click on "DependOnService".
  Step 9: Remove all the words in the text, except "Afd" box, and then click OK. You are done here

  Step 10: Then under 'Services', are looking for "EapHost", this should be a few records below Dhcp step 11: same thing, double-click on the file "DependOnService".
  Step 12: Delete everything in the text are and click OK. You are finished.

  Now close everything and RESTART WINDOWS. Your WLan should be back and work once at startup of your computer. Hope that makes you win like he saved me. Thanks to an original poster for the wonderful of the resolution. Your message has been almost too obscure to find, but I'm glad that this has been RESOLVED! I will be passing the word around to save people from the constant agony of WLAN SVC goes ballistic every time after a cleaning the registry. »

  Now then... I was about to wipe the machine flowering in any case, I thought ' what the *', and just did the 12 steps without even a reg backup... AND THIS DO FEAR WORKED!

  911techmedics saved our skins...

  Thank you!!!

  The Lady Sharrow...

• Windows 8 blocks when starts the automatic Maintenance

  I have a DELL Inspiron desktop computer with windows 8. When I leave the computer for a little automatic maintenance start and programs and then crash and nothing starts. CTRL-ALT-DEL will not bring anything. A few pop - ups can work for the taskbar a bit, until even those who refuse to work. Side bars may appear when the mouse enters in a corner, if not too much time has passed, but then will stick and be non-responsive as the rest of the system. I have to turn off and restart the computer to get windows in market order manually.

  I have read and tried the 3 steps listed here, but no problem was found. I suspect a corrupted file or update somewhere in the system, but do not know what files to look at.

  Unfortunately, I don't have the windows disc 8 on-site.

  Thanks, just thank you. I agree, I want to know why we don't know EXACTLY what made this program stupid and why we cannot turn off completely / permanently if we so choose.

  In any case, I had this problem but it seemed to have worked himself so I consider this closed. My apologies.

• How to start the Automatic Configuration service in Windows XP Pro SP3

  I just installed my Agere Systems model Speedtouch 0110 on my laptop, I installed the drivers without the utillity and when I tried to connect it to my Homehub he said start please WZC. How can I start it?

  GoTo

  Beginning

  Run

  Type "Services.msc".

  Come in

  Find Wireless Zero Configuration in the list

  Click Start

  hope this will do

  Best regards and good luck

  Sohail Khan

• Could not start the automatic updates. Get an error that Windows cannot check the updates, D0000034 after the failure of the Java updates

  OP: Action Center... PC problem: 1 important message

  After the failure of the attempt to install the JAVA update, I received this message from Action Center... Windows cannot check the updates. So I was taken to the dialog box and retried to check the updates of windows fails again with the code D0000034. Also did a system restore to the place before the installation of JAVA update attempt, but was no help. Can you help me?

  Hello Irfan,

  Thanks again for your response. Since your last I discovered through my system status (Control Panel), I wrote that my product ID and the Windows 7 activation status not available. So I followed instuctions to help and microsoft support to activate.  Yet once, I got the error code D0000034 as before with the problem of update. However, I was given the opportunity to phone, but received no phone #. I bought the DVD of Windows 7 and installed on the PC that was custom built for me.  On the site Web microsoft help and support, I was asked for the product ID, which according to them is a # 20 numbers.  Not the only one, I have is the product key which is one 25-alpha-numeric.  I tried to enter only and does not pass.  This is why I say that I can pay for help since I did not ' have the product ID.  Maybe it isn't your area of expertise, Irfan, but I was hoping... I re - install windows on last April when I got in trouble and probably did not re - activate? What do you think?  If you can get back on track, I would be very grateful and thank you once again to be a big help!

  wandrinstar

  Please ignore above request. I have since re-activated Windows and the problem was solved with technical assistance telephone and thank you again for your help, Irfan. Also thanks to all the people answering the phone at microsoft. The experience I had was really a pleasure. I wasn't expecting such an attitude courteous and professional.

  Keep up the good work,

  wandrinstar

• Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

  Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

  Hello

  1. what application or antivirus security suite is installed and your current subscription?

  2 Norton (another) or a McAfee application ever installed on this machine?

  3. What are the fix applications that you used so far to try to fix this problem?

  Try the next method and check if that helps you with the question of the 127 error you receive.

  Method 1: Rdding the DLL file by doing the following:

  1. Click Start and click Run, in the search box type CMD and press to enter.
  2. right click on CMD in the list and click "Run as Administrator".
  3. type the following command and press ENTER. Regsvr32 msvcp71.dll
  4. close the command prompt window.

  Method 2: run the file system (CFS) Checker:

  (Note: you need an XP installation disk to start the System File Checker search.)

  The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

  1. click on start, and in the box to start, search type CMD
  2. right click on CMD in the list and click "Run as Administrator"
  3. type the following command and press ENTER. Sfc/scannow
  4. close the command prompt window.

  For more information on scan SFC (System File Checker), please look in the link mentioned below.

  http://support.Microsoft.com/kb/310747

  I hope this helps.

• Automatic extension of a data file with the complete file system

  We are working on a database of Oracle10g 10.2.0.4 on HP - UX 11.31 (Itanium |) PA - RISC)
  
  We would create our database by activating the automatic Extension of our data files
  (defining the maximum size limit or unlimited)
  
  Our question is:
  What happens to the database in the event of complete file system when one of the data files should be automatically extended?
  The extended data file has become corrupted or the db cease its activity?
  
  
  Marco

  No data corruption should occur. If Oracle is trying to develop, OS it will send the message that it is not possible. That's all.

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• I tried several times to set up an email account with Thunderbird, but the next time I start the computer and start Thunderbird, no account is displayed.

  I bought a new desktop PC with Win 8.1 and installed Firefox and Thunderbird.
  Then, I tried to set up the e-mail account manually (in IMAP) following the instructions here: https://support-en.upc-cablecom.ch/app/answers/detail/a_id/22 , but can't set the mail server outgoing smtp correctly (I could receive mail but not send them). Subsequently, I deleted this account. Then, I started the automatic mail with UPC Cablecom under the http://www.upc-cablecom.ch/content/dam/www-upc-cablecom-ch/Support/executables/upc-cablecom-email-assistant.exe link tool and he did successfully set up the account, however, because a POP3 server account. As I was not happy with it, I deleted the server of incoming POP3 mail (and lost the e-mails received, of course...) and retried a manual installation. In doing so, I got an e-mail account IMAP incoming more two outgoing SMTP server (comparing them, I also understand the configuration error that I had done the first time). I then deleted the manual as SMTP server the automatically the installation server worked correctly.
  In this context, accepting them and sending E-mail worked OK. However, the next time I started the computer, the e-mail account disappeared and Thunderbird was asked to set up a new account again. I have successfully set up manually once more, but the same problem resurfaced at the next startup, the e-mail account was gone...!

  Thank you in advance for your help!
  Maxonce

  Verify which profile is used.

  AppMenu button - help - troubleshooting - profile directory - Open Directory information

  Your profile folder should open in Windows Explorer. What is the location of the profile?

  Restart your computer and repeat the steps above. The profile folder has changed?

• start the Wirless Zero service

  need to start manually each time

  Hi Hitnruntulsa,

  To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel.

  If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools.

  If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic.

  This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the automatic Wireless Configuration service zero wireless and click on the OK button.

  The automatic Wireless Configuration can also be started and stopped from a command prompt. To start the automatic Wireless Configuration, run the following command:

  net start wzcsvc

  To stop the automatic Wireless Configuration, run the following command:

  net stop wzcsvc

  For more information, see the link.

  Wireless Zero Configuration Reference

  Please post back with the results and we will be happy to help you further.

• Impossible to connect a computer to the wireless network, I would like to first of all the automatic configuration service and I need advice.

  Article 861122 start WZC

  Unable to connect a computer to the network wirelee I firstly the WZC serviceand I need advice. TX

  Hello

  • Are you referring to Wireless Zero Configuration (WZC) Service?
  • What happens when you start the automatic Wireless Configuration Service?
  • You receive an error message?
   
  If you experience problems with the wireless network, reconfigure the Automatic Configuration Wireless for all wireless profiles automatically, click the fix this toolfrom the link below.
  Click run in the file download dialog box, and then follow the steps in this wizard.
  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
   
  See also:
  In Windows network connection issues
  http://support.Microsoft.com/kb/313242