JDeveloper put 11.1.1.6 to date with soa_Extension 11.1.1.3

Similar Questions

• Problems with WiFi after put 10.11.2 up-to-date.

  Mid 2011 iMac.  Problems with WiFi after put 10.11.2 up-to-date.  No associated network.  Everything was fine before the update. All the pre 10.11.2 device works fine.  Anyone else having issues?  I have to disconnect and reconnect manually.  WiFi drops every 5 to 10 minutes.  Nothing has changed on the machine something of the update.

  Please do not comment on the age of the system.  Achieve a Mid 2011 arrived at a possible replacement point.  I have many other new Mac at home.  The Mid 2011 is spec'd with 16 GB of RAM, i7 and SSD.  It's always very fast.

  Thank you in advance for the answer...

  Hi Captainsniz

  There are a few things to try. Keep doing this until the problem disappears.

  First of all, if you have not already, shut down the computer completely, wait about 1 minute, then restart.

  Disconnect the wifi network either via system preferences, either by pressing the "Option" key and clicking on the wifi menu bar icon.

  Reset the DHCP lease by going to system preferences > network and show Advanced Options, and then click the button to "Renew the DHCP lease" TCP/IP tab.

  You can delete the wifi network of system preferences > network > network name... then close system preferences. Then reopen and add the network in.

  You can also restart your wifi router, it erases the old connections. Most of the routers you just turn off and wait a few minutes, then restart. You can also reset your ISP modem if you have a.

  Finally, you can try to reset the PRAM and SMC on your Mac. I'll get this info here on Apple Support KBs for your particular Mac.

  Be sure to back up your computer.

  Hope this helps, Greg

• At the end of August, 2011, I put Vista up-to-date with three recommended updates.

  At the end of August, 2011, I put Vista up-to-date with three recommended updates. I've never updated with the optional updates. After the required reboot, my computer did not start, did not start in safe mode or last good configuration mode. Then the blue screen with error fatal appearred. Everything is gone: power supply, hard drive, motherboard. That's happened? I know that the same thing happened at other institutions. What I can do!

  Hello

  I think you should use "Windows Vista installation disc" do "Startup Repair" - here's how do:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  part:

  How to use Startup Repair?

   

  LC

• put question in the form of data

  I have a SSN or EIN number field. The xml output must be in the format 123-45-6789 or 12-3456789 depending on whether the entity is a person or a company. I have a few other areas, I can probably use to trigger one format rather than the other, but I don't know if I can selectively format a field in several ways.

  Is this possible and if so, does anyone have a sample or a script that could do that?

  I know that I could view messages, postings and others on the ground, but it would be a better user experience, if she has been formatted endangered in this way, users can enter the data of some sort that they were comfortable. Thanks for your suggestions!

  Hello

  I did some tests and it seems that change the picture for text objects clause has no effect.

  This also does not work when you use the terms of the alternative image with different regional settings

  Thus, the only way I've found is to format the data with the Format() method in FormCalc.

  var source = $.rawValue
  var formattedSource
  
  if (AcctOpenProcesssubform.CSSystemSetupForm.Account_Client_Info.personalCust_domicile.US_Citizen.rawvalue eq "us") then
    formattedSource = Format("XX-XXXXXXX", source)
  else
    formattedSource = Format("XX-XXX-XXXX", source)
  endif
  
  $.rawValue = formattedSource
  

• Error: The lines of data with unmapped dimensions exist for period "1 April 2014".

  Expert Hi

  The below error when I click on the button Execute in order to load data in the area of data loading in 11.1.2.3 workspace. Actually, I already put in the tabs global mapping (add records of 12 months), mapping of Application (add records of 12 months) and map sources (add a month "1 April 2014' as the name of period with Type = Explicit mapping") in the service of the period mapping. What else should I check to fix this? Thank you.

  2014-04-29 06:10:35, 624 [AIF] INFO: beginning of the process FDMEE, process ID: 56
  2014-04-29 06:10:35, 625 [AIF] INFO: recording of the FDMEE level: 4
  2014-04-29 06:10:35, 625 [AIF] INFO: FDMEE log file: null\outbox\logs\AAES_56.log
  2014-04-29 06:10:35, 625 [AIF] INFO: user: admin
  2014-04-29 06:10:35, 625 [AIF] INFO: place: AAESLocation (Partitionkey:2)
  2014-04-29 06:10:35, 626 [AIF] INFO: period name: Apr 1, 2014 (period key: 4/1/14-12:00 AM)
  2014-04-29 06:10:35, 627 [AIF] INFO: category name: AAESGCM (category key: 2)
  2014-04-29 06:10:35, 627 [AIF] INFO: name rule: AAESDLR (rule ID:7)
  2014-04-29 06:10:37, 504 [AIF] INFO: Jython Version: 2.5.1 (Release_2_5_1:6813, September 26 2009, 13:47:54)
  [JRockit (R) Oracle (Oracle Corporation)]
  2014-04-29 06:10:37, 504 [AIF] INFO: Java platform: java1.6.0_37
  2014-04-29 06:10:39, 364 INFO [AIF]: - START IMPORT STEP -
  2014-04-29 06:10:45, 727 INFO [AIF]:
  Import of Source data for the period "1 April 2014".
  2014-04-29 06:10:45, 742 INFO [AIF]:
  Import data from Source for the book "ABC_LEDGER".
  2014-04-29 06:10:45, 765 INFO [AIF]: monetary data lines imported from Source: 12
  2014-04-29 06:10:45, 783 [AIF] INFO: Total of lines of data from the Source: 12
  2014-04-29 06:10:46, 270 INFO [AIF]:
  Map data for period "1 April 2014".
  2014-04-29 06:10:46, 277 [AIF] INFO:
  Treatment of the column mappings 'ACCOUNT '.
  2014-04-29 06:10:46, 280 INFO [AIF]: data rows updated EXPLICIT mapping rule: 12
  2014-04-29 06:10:46, 280 INFO [AIF]:
  Treatment of the "ENTITY" column mappings
  2014-04-29 06:10:46, 281 [AIF] INFO: rows of data updates to EXPLICIT mapping rule: 12
  2014-04-29 06:10:46, 281 [AIF] INFO:
  Treatment of the column mappings "UD1.
  2014-04-29 06:10:46, 282 [AIF] INFO: rows of data updates to EXPLICIT mapping rule: 12
  2014-04-29 06:10:46, 282 [AIF] INFO:
  Treatment of the column mappings "node2".
  2014-04-29 06:10:46, 283 [AIF] INFO: rows of data updates to EXPLICIT mapping rule: 12
  2014-04-29 06:10:46, 312 [AIF] INFO:
  Scene for period data "1 April 2014".
  2014-04-29 06:10:46, 315 [AIF] INFO: number of deleted lines of TDATAMAPSEG: 171
  2014-04-29 06:10:46, 321 [AIF] INFO: number of lines inserted in TDATAMAPSEG: 171
  2014-04-29 06:10:46, INFO 324 [AIF]: number of deleted lines of TDATAMAP_T: 171
  2014-04-29 06:10:46, 325 [AIF] INFO: number of deleted lines of TDATASEG: 12
  2014-04-29 06:10:46, 331 [AIF] INFO: number of lines inserted in TDATASEG: 12
  2014-04-29 06:10:46, 332 [AIF] INFO: number of deleted lines of TDATASEG_T: 12
  2014-04-29 06:10:46, 366 [AIF] INFO: - END IMPORT STEP -
  2014-04-29 06:10:46, 408 [AIF] INFO: - START NEXT STEP -
  2014-04-29 06:10:46, 462 [AIF] INFO:
  Validate the data maps for the period "1 April 2014".
  2014-04-29 06:10:46, 473 INFO [AIF]: data rows marked as invalid: 12
  2014-04-29 06:10:46, ERROR 473 [AIF]: error: the lines of data with unmapped dimensions exist for period "1 April 2014".
  2014-04-29 06:10:46, 476 [AIF] INFO: Total lines of data available for export to the target: 0
  2014-04-29 06:10:46, 478 FATAL [AIF]: error in CommMap.validateData
  Traceback (most recent call changed):
  Folder "< string >", line 2348 in validateData
  RuntimeError: [u "error: the lines of data with unmapped dimensions exist for period" 1 April 2014' ""]

  2014-04-29 06:10:46, 551 FATAL [AIF]: COMM error validating data
  2014-04-29 06:10:46, 556 INFO [AIF]: end process FDMEE, process ID: 56

  Thanks to all you guys

  This problem is solved after I maped all dimensions in order of loading the data. I traced only Entity, account, Custom1 and Custom2 at first because there is no source map Custom3, Custom4 and PIC. After doing the mapping for Custom3, Custom4 and PKI, the problem is resolved. This is why all dimensions should be mapped here.

• Transfer of data with rowtype block

  Hello

  I'm using the version of oracle forms 11g (11.1.2.1.0 on 64-bit windows).

  I have a block of data with a lot of columns.

  I have what it takes to fill the block of data at A TIME-NEW-FORM-INSTANCE with the query.

  My problem is, I have what it takes to fill the block with % rowtype (and not every article in separately), since I have a lot of elements (= columns) in this data block.

  Here is my code (in One TIME-NEW-FORM-BODY relaxation):

  DECLARE

  CURSOR pop_blck_cur IS

  Select *.

  ALERTS. CRDX_ALERTS_PROCESS_TYPES

  where (PROCESS_TYPE_ID, STATUS_DATE) in (select PROCESS_TYPE_ID, max (STATUS_DATE), 'MOST UPDATED'

  ALERTS. CRDX_ALERTS_PROCESS_TYPES

  Group of PROCESS_TYPE_ID)

  order of PROCESS_TYPE_ID;

  l_row pop_blck_cur % ROWTYPE;

  l_first_rec NUMBER;

  l_last_rec NUMBER;

  cur_rec NUMBER;

  BEGIN

  LAST_RECORD;

  l_last_rec: =: system.trigger_Record;

  PREMIER_ENREGISTREMENT;

  l_first_rec: =: system.trigger_Record;

  cur_rec: = l_first_rec;

  FOR rec IN pop_blck_cur

  LOOP

  GO_BLOCK ('ALERTS_PROCESS_TYPES_BLOCK');

  cur_rec: = GET_BLOCK_PROPERTY ('ALERTS_PROCESS_TYPES_BLOCK', CURRENT_RECORD);

  GO_RECORD (cur_rec);

  ALERTS_PROCESS_TYPES_BLOCK % ROWTYPE : = l_row;        -here I need the slider assignment to my block of data

  WHEN THE OUTPUT: SYSTEM. LAST_RECORD = "TRUE";

  NEXT_RECORD;

  END LOOP;

  How to achieve this?

  Tanks in advance,

  Elad

  This isn't the works of forms in a way.

  Your base on your table of CRDX_ALERTS_PROCESS_TYPES block

  Equip your WHERE condition the default value of the property - where the block.

  In the WHEN-NEW - EXAMPLE of FORM, just put an EXECUTE_QUERY;

  If you want to fill the block "by hand", you will need to assign each item separately.

• Get the date with the millisecond of the table

  I want to get the date with milliseconds in table format in the variable. How to get there?
  
  SQL > create table test_date (col1 date);
  
  Table created
  SQL > insert into test_date values (sysdate);
  
  1 row inserted
  
  SQL > commit;
  
  Validation complete
  
  SQL > select * from test_date;
  
  COL1
  -----------
  18/12/2009
  
  
  Here I have to get datewith "millisecond" format and put it into the variable varchar2 (50) and pass this
  to Java.
  
  
  SQL > select to_char (COL1, ' mm/dd/yyyy hh24:mi:ss. FF') of test_date;
  
  Select to_char (COL1, ' mm/dd/yyyy hh24:mi:ss. FF') of test_date
  
  ORA-01821: date format not recognized
  
  SQL >
  
  Thank you
  Khaldi

  user601042 wrote:
  I want to get the date with milliseconds in table format in the variable. How to get there?

  SQL > create table test_date (col1 date);

  Your data col1 type should be TIMESTAMP.

  See you soon
  Sarma.

• Back up my data with installation DVD

  I want to transfer my data to an external with installation DVD drive because my Mac OS isn't bootable anymore because of the sierra of mac os. So I'll do a new install of snow leopard on my macbook late 2009. Does anyone know how to transfer my data in my external drive across the disc of the DVD Installer prior to installation of Snow Leopard sanitation? Somone told me to do it this way, but I don't know how.

  I recommend strongly against from any attempt of recovery/reinstallation without a valid (and verified) backup on a different disk. As you are still able to boot the system with the installation DVD, you can

  • use Disk Utility on the installation DVD to create a full backup of your internal drive to an external
  • copy /Applications and /Users to an external drive (which should focus on 'all' critical data)

  Then comes to an attempt of resettlement.

  You can restore your data after the installation of the operating system. First make a note of bookmark, password or registration required by your system.

  Perform a full backup with time machine, then restart with your installation dvd, then reinstall the operating system

  When Setup restarts, you can restore your data with the migration wizard.

  When possible, you should do a clean install with 3rd party applications and drivers HW until the migration may or may not be compatible with the older operating system and removes the possibility of corruption of preference.

• As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will

  As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will be available today?

  Hello

  Yes - Apple advises that watch OS 3 is scheduled to be released sometime today.

• I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to look for a screen tested on it, it didn't work

  I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to get a screen tested on it because she does not have the person had not on is it did not work, even if the person has used only flow to correct and get a few corosions out with the replacement of some components of the person responsible for 10 minutes after having plugged in and the battery it wamer so it as I said her test with a multi meter test and he registered 12v and I wondered if something was wrong with it and if I could fix it easily?

  Check the liquid Indcator of Contact.

  Instructions here > liquid for iPhone or iPod is not covered by the warranty - Apple support

  Just so you know, the service of the liquid damage to an iPhone or iPod is not covered by the limited warranty of one Apple or an AppleCare Protection Plan (APP).

• Dates with no thumb nails in the list of 'Moments '.

  Have deleted (totally) pictures of a 'Moment' but the date still appears in the list of 'Time' (sidebar selection is 'Photos'

  When you scroll the program list of the 'Moments' will crash when it encounters a 'moment' date only

  Please explain what you see

  and it would be good to get up-to-date with OS X 10.11.4 and Photos 1.5 - OS X 10.10.5 is four day behind and missing many new features and bug fixes

  LN

• I have a 6 s, using tracfone - don't you data with cellular, wi - fi only

  My carrier is tracfone and my new 6 s gets only the data with a wi - fi, zero with cell - is the problem with my phone from tracfone?

  joemehling wrote:

  My carrier is tracfone and my new 6 s gets only the data with a wi - fi, zero with cell - is the problem with my phone from tracfone?

  Yes, cellular data are a function of carrier.

• lost all my data with no back upward after update ios9 can there be found

  updated my iPhone 6 more ios9 lost all the data with no back up is it possible I can get pictures of data and applications and how can I do this?

  You can re - download all your media, and if you use iCloud for Messages, Notes, Contacts, calendars, stream of pictures, etc, then once you connect to iCloud, these elements will be re - download to your device. Or, you can plug in to iTunes on the computer you sync with and synchronize your media.

  See you soon,.

  GB

• The GPS data with other analyzed data record

  Hello!

  I am a new user of DASYLab and not very good with coding, so please bear with me! I try to record (timestamp, latitude, longitude) already analysed GPS data with other data (accelerometer, etc.) in the same. DDF file. Right, GPS analysed is now sent through a series of three demultiplexers for each signal and only 1 of 16 channels, reducing the size of the output data. This data is then saved in a. The CAD file. Other data on average, recorded in one. DDF file, then saved another. The CAD file. We used to compare the data from the GPS and other devices by comparing timestamps.

  I would like to save all data to a file, either. DDF of. CSA (.) DDF would be preferable).

  When I try to add more channels in the. DDF save the module after the demultiplexer black box and GPS data to it, I get an error saying "the data to an entry in this module are the wrong type." I also receive this error when trying to send the data GPS to the. CSA Save module. I learned that this means that the size of the files is not the same of this thread. My question is, how can I make sure that the data have the same characteristics of time so I can save to the same file?

  If you need more information I would be happy to provide it, I apologize if I have something important to go.

  Thanks for reading,

  etdiv

  That's what I needed. Your time is the driver. In the RS232 input module, click the Options button.

  Select the measurement of output value, and then click the button on the time Base and select sync/time Base driver.

  That should allow you to write to the DDF file.

  

• Reading data with NOR-5772

  I'm reading the data with the NOR-5772.  I tried the example code(NI_5772-Getting_Started_(Host).vi), and it will read noise (with nothing plugged into channels).   However when I try to send a signal (such as that generated with a NEITHER-DAQ card on the same system and routed to AI0/AI1), the signal does not change a lot of the noise.   I have the drivers updated and am under LabView 2012 (32-bit and 64-bit, I get the same result)

  Everyone has to experience this problem?   Thank you.

  Yes, the device is AC coupled and has a high pass filter.  There is a diagram of frequency response on page 20 of the user manual:

  http://www.NI.com/PDF/manuals/373625a.PDF

  It seems that the cuttoff frequency is about 100 kHz.