Transfer of data with rowtype block

Similar Questions

• I bought an iPhone 6s and want to transfer the data from my old iPhone 4S with iTunes

  I bought an iPhone 6s and want to transfer the data from my old iPhone 4S with iTunes but it says "the"iPhone"iPhone cannot be used because it requires a newer version of iTunes. Go to www.itunes.com to download the latest version of iTunes. "

  I checked and the version of itunes is the latest AID!

  DooozySue wrote:

  I checked and the version of itunes is the latest AID!

  Most likely, what you found, is that the iTunes version is the latest available for your operating system.

  The latest version of iTunes is 12.4.3.  This version requires at least OS X 10.8.5 or later version, or Windows 7 or later version.

  If your iTunes version is earlier than 12.4.3, it will probably not recognize your 6s performance iPhone iOS 9.

  If you do not have the required operating system, get first.  Then download from iTunes

  http://www.Apple.com/iTunes/download

• Forecaster data transfer tool work with SL?

  I used the tool for transfer of data to Dynamics GP, but never with SL.  Can you please confirm if it works as well with SL?

  Thank you!

  Found via a search on the web...

  «This application of type Wizard will allow administrators to budget copy the data from the database Microsoft Forecaster in the systems Microsoft Dynamics ERP Microsoft Dynamics AX 2009, Microsoft Dynamics GP 2010 and Microsoft Dynamics SL 2011.»

  Microsoft Forecaster data transfer tool to defer management Microsoft Dynamics | MSX group:
  http://msxgroup.com/Microsoft-Forecaster-data-transfer-tool-Microsoft-Dynamics-management-reporter

  There is not a forum of communities dedicated to Microsoft Dynamics. You will probably get better help

  https://community.dynamics.com/product/SL/default.aspx

  Don

• Increase the capacity of data store, which with the block size?

  Hello

  I am trying to expand my datastore 2 TB, I added a new lun 2 TB of the FC SAN TB 4 even and there is no problem adding this in the existing data store.

  But the existing data store is formatted in VMFS3 with a block size of 4 MB for a maximum file size of 512 GB. But when I try to extend the data store to select the size of the block is set to 1 MB and disabled.
  The measure automatically takes on the size of the original block or wil he get a block size of 1 MB? There are some > 256GB files on the existing data store and I think I'd get a strange behavior, if half of the data store is 4 MB and the other half is 1 MB blocksize.

  Can anyone confirm that the blocksize wil be the same for the measure?

  I can also make a second warehouse 2 TB one manually fracture the virtual machine on 2 data warehouses. is there any advantages or disadvantages to this approach?

  Don't you worry, add an item to an existing data store certainly will not change the size of the block. In any case, if it is an option that you can use two data warehouses, I would. With two distinct data warehouses that you will not only be able to spread the load on each of these LUNS but also avoid the complexity. With ESXi 5 (VMFS-5), a single LUN can grow up to 64 ~ to without needing extensions.

  BTW, a 4MB block size allows 1 TB less than 512 bytes.

  André

• How to connect a portable laptop Windows 8 with Windows 7 computer via Ethernet cable and transfer the data directly?

  I have a laptop Windows 8 . I want to connect to a new round of windows 7 and transfer the data at least 8 MB/s.

  Please send me the procedure to follow. I don't want to share Internet, but want to transfer data.

  You can do this, but you need a special type of Ethernet cable called a crossover cable.  This means the son in the swap position cables so that "send" and "receive" the computer two plugs can communicate.

  Learn more here: http://windows.microsoft.com/en-us/windows/connect-two-computers-crossover-cable#1TC=windows-7

• Cannot access another data base "ROWTYPE.

  Hi all, I am using SQLDeveloper 3.2.20 on Oracle 11 g 2 and teacher of Windows 7 sp1 and so far, smooth sailing.

  I use the SCOTT/tiger account i.e. access, certainly no role sysdba privileges.

  I'm practicing my codes and the use of explicit cursors generate following errors:

  Error report:

  ORA-06550: line 5, column 17:

  PLS-00352: cannot access another data base "ROWTYPE.

  ORA-06550: line 5, column 17:

  PLS-00201: identifier 'EMP_CURSOR@ROWTYPE' must be declared.

  This is the code (I tried orcl.scott.emp_cursor@ROWTYPE, but which no longer works)

  Set serveroutput on;

  DECLARE

  CURSOR emp_cursor IS

  SELECT EmpNo, ename

  FROM scott.emp;

  v_emp_record emp_cursor@ROWTYPE;  -don't even try the 1 by 1

  number of v_sqlcode;

  v_errm varchar2 (64);

  BEGIN

  IF NOT emp_cursor % ISOPEN THEN - EXTRACTION lines only when the cursor is opened!

  OPEN emp_cursor;

  END IF;

  LOOP

  LOOK INTO v_emp_record emp_cursor; -Gets the 1st row of cursor!

  OUTPUT WHEN emp_cursor % NOTFOUND or emp_cursor % NOTFOUND IS NULL; -in case no line

  INSERT INTO (empid, empname) tmp_list - inserts in a temporary list

  VALUES (v_emp_record.empno, v_emp_record.ename);

  END LOOP;

  COMMIT;

  NARROW Emp_cursor;

  EXCEPTION

  while others then

  v_sqlcode: = SQLCODE;

  v_errm: = SUBSTR (SQLERRM, 1, 64);

  DBMS_OUTPUT. Put_line ('SQL' | v_sqlcode |) '  ' || v_errm);

  END;

  /

  I begin to suspect that it is something 'access privilege '.

  Can someone point me in the right direction please?

  Hello

  Leila says:

  Ahhh, I see where I went wrong, Oracle' a global temporary table is not the same as the temporary table in SQLServer, I first need to create the temporary table, then drop it then.

  Remove the table only if you expect never to use again.  Otherwise, let it stay there.

  "Global temporary table" is a misleading name in Oracle.  The table itself is permanent, but the data in the table are temporary.  The data is deleted automatically at the end of the transaction or session, depending on whether the table has been created with ON COMMIT DELETE ROWS or ON COMMIT PRESERVE ROWS.

  Problem is, there is no data in the temporary table after executing the PL/SQL block although DBMS_OUTPUT displays data from test loading one!

  The default value for global temporary Tables is ON COMMIT DELETE ROWS, which means that the table is cleared whenever you make a COMMIT to auotmatically.

  You probably want ON COMMIT PRESERVE ROWS, like this:

  CREATE a table temporary global tmp_list (NUMBER, tmp_empno tmp_ename. VARCHAR2 (10)) ON the COMMIT PRESERVE ROWS;

• Back up my data with installation DVD

  I want to transfer my data to an external with installation DVD drive because my Mac OS isn't bootable anymore because of the sierra of mac os. So I'll do a new install of snow leopard on my macbook late 2009. Does anyone know how to transfer my data in my external drive across the disc of the DVD Installer prior to installation of Snow Leopard sanitation? Somone told me to do it this way, but I don't know how.

  I recommend strongly against from any attempt of recovery/reinstallation without a valid (and verified) backup on a different disk. As you are still able to boot the system with the installation DVD, you can

  • use Disk Utility on the installation DVD to create a full backup of your internal drive to an external
  • copy /Applications and /Users to an external drive (which should focus on 'all' critical data)

  Then comes to an attempt of resettlement.

  You can restore your data after the installation of the operating system. First make a note of bookmark, password or registration required by your system.

  Perform a full backup with time machine, then restart with your installation dvd, then reinstall the operating system

  When Setup restarts, you can restore your data with the migration wizard.

  When possible, you should do a clean install with 3rd party applications and drivers HW until the migration may or may not be compatible with the older operating system and removes the possibility of corruption of preference.

• How to hide the status of «Transfer of data...» » ?

  I want to hide the State of «Transfer of data...» "that shows in the bottom left of the browser's screen because he is as dangerous as a flashing icon, from the ergonomic point of view.

  You can hide the pop-up messages for specific with userChrome.css code State if you still want to see links to the overview.

  Add code to the file userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  Customization files (interface) userChrome.css and userContent.css (Web sites) are located in the chrome folder in the user profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #statusbar-display[label^="Looking"] {display:none !important;}
  #statusbar-display[label^="Connect"] {display:none !important;}
  #statusbar-display[label^="Waiting"] {display:none !important;}
  #statusbar-display[label^="Transfer"] {display:none !important;}
  

• If I have to reinstall Firefox 3.66, how can I transfer my firefox with my favorites, etc. profile?

  If I have to reinstall Firefox 3.66, how can I transfer my firefox with my favorites, etc. profile?

  User Agent

  Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727)

  Have a look here
  Profiles - where Firefox stores your bookmarks, passwords and other user data
  There are links to pages showing you how to move your profile etc.

  If you reinstall on the same machine, it will find your existing profile however.

• Transfer of data from IDE drive to SATA Drive

  I have an old HP PC with an IDE hard drive, running windows XP.  I want to transfer data from hard drive to a newer HP Pavilion computer on windows Vista. Need instructions on how to transfer the data and what toos hardware and software are needed.

  Details of the recent PC (target PC) are:

  Type of hard disk: SATA.

  Model - A6160e CTO desktop PC / product nbr - gg754av / serial number MXG73501SZ.

  More old HP Pavilion PC:

  Hard disk type: IDE

  Preponderance of details:-cannot read the label! (about 7-10 years) [old and gray - sound like me!]

  Thank you all

  NY11563

  E-mail: [email protected]

  Hello

  There are limited resources,

  (a) use Data transmission cable, something like one of the following thread:

  http://au.price-selector.com/search?k=easy%20transfer%20cable & cid = 1-3-1-1-3

  (b) another option: buy an IDE HARD drive case and put the old HDD on it, you can transfer data and use it as a HARD drive external.

  Kind regards.

• Transfer of data to very slow HD (pictures) post on Middle iMac 2010

  Why is the transfer of data from my library of Photos so slow?  My library iTunes (39 GB) transferred in 30 minutes.  The system tells me that it will take 2 days to transfer my photo library.  I have 109 GB in the Photo section, when I look to the top of the drive status.  I think that content of iPhoto automatically merged with correct pictures?  The iPhoto library can be removed to make more room on the hard drive?  How much free space should I maintain hard disk?

  How the EHD are connected to the iMac? I suspect a problem with the JEP or its connection to the iMac.

• LabVIEW interface with multiple blocks of Festo module

  I am trying to connect with a block of Festo, but I can't. Here are the details:

  I'm under Labview 2012 SP1 with IndComm-DeviceNet 2.2 pilot on a 64-bit Windows OS. I installed a PCI 8532 card NOR. I see the map to the MAX.

  The block of Festo is built with the following Modules: CPX_FB11 (communications module), 4 analog input Modules, 1 Digital module, 2 digital modules followed by 32 Festo valves. (Image below)

  

  Using DeviceNet PXIPCI Basics.lvproj I did the following:

  In the project, right-click on desktop > New > targets and devices > existing target or device, discover an existing target or device...

  Expand the node of DeviceNet Master Interface, DeviceNet1 chosen and added to the project.

  A click on the newly added DeviceNet/device target > New > targets and devices...

  Expanded the Festo Block "CPX_FB11" selected DeviceNet slave device and added to the project.

  Initially, I received an error card technique 'EDS file no assigned' I solved this by following the direction listed here.

  However, I'm unable to "see" anything other than the CPX_FB11 LabView. The tree view of the devices lists not analog, Digital e / s or valves. I can't operate the Valves and IOs digital or analog. When I run the entire project VI they then expire.

  Any help would be appreciated.

  Thank you

  Tennessee Paul

  Hi Jesse,.

  I'm not entirely sure what the specific problem was. I kept getting strange behavior. Errors in LabView and on my camera from Festo. The EDS files change. So, I did as any natural born THERE would be worker, I rebooted.

  Here are the steps I used to get this project going. In doing so, I found that to set up a DeviceNet device in LV2012SP1, no need to manually enter the data in file EDS. There is a tool to load files EDS. It dealt with issues I had in the previous Forum posts: here about loading files EDS in LabView and here regarding setting up a DeviceNet network.

  Environment: Windows 7, 64-bit processor. IndComm 2.2 pilot. LabVIEW 2012 SP1

  Starting with the example LabView project: "Devicenet PXIPCI Basic.lvproj.

  Add a DeviceNet master to a LabView project

  1. The project: right-click on my computer
  
  
  1. Select new
  
  
  2. Select the targets and the device (s)
  
  
  2. Select the option "discover existing devices.
  
  
  3. Select the discovered device.
  
  
  4. Click 'OK' (Note: in this case, my master is a card PCI of NOR-8532)

  Add a DeviceNet slave device to a LabView project

  1. Right-click on the master device newly added in the project tree
  
  
  1. Select new
  
  
  2. Select the targets and the device (s)
  
  
  2. Select 'discover existing devices.
  
  
  3. Select the discovered device.
  
  
  4. Click OK. (Note: in this case my slave is a block of Festo CPX-FB11.)

  Load an EDS file to the slave device

  1. Right-click on the slave device
  
  
  2. Select "Sheet"... »
  
  
  3. Click on add files...
  
  
  4. Navigate to the location of the EDS file.
  
  
  5. Select the file.
  
  
  6. Click OK.
  
  
  7. In the left pane, expand the data sheet newly added up to reach the node displays the version.
  
  
  8. Select the version.
  
  
  9. Click OK.

  Check the device and file EDS

  1. Right-click on the slave device
  
  
  1. Select utilities
  
  
  2. Select the Panel of Test online
  
  
• Select the option 'Device status' in the field of category on the left.


• On the right, select the slave device, you want to check.


• Click on "check the device".


• Read the errors/warnings or lack thereof.

In my case I had errors in my EDS file. Basically the slave device was not defined for the correct number of bytes of input/output in the EDS, i.e. a wrong configuration file. To fix this I had to change the EDS file.

Edit the file EDS

To change the EDS file, I used EZ-EDS , which is a freeware, devicenet specific EDS editor of ODVA.

I did my corrections and saved my file EDS. (After having saved my original, of course).

Remove the installed Labview EDS file

1. Navigate to the following location: C:\ProgramData\National Instruments\NI-IndComm for DeviceNet\Datasheet


2. Remove the sheet (Note: there is more that one datasheet added manually.) Additional EDS files come with the IndComm driver. Find the EDS file for the specific device that you want to replace and delete).

I restarted LabView.

I went through the steps above again and loaded my new EDS file.

I saved the project and came out of LabView.

I rebooted the computer and the slave device.

I restarted the project and launched a VI.

I was able to communicate with the device. That is something that I had not been able to do before. And, in doing so, I discovered how the device speak and why were not each module. (I have a standard for my block devices EDS file, as it appears that LabVIEW is not capable of a modular system that requires an EDS file for each module. I could be wrong on that last part though, as there may be a setting on my real device. But it is unecssary in my project. So I do not consider this further.) Because I was using a standard file of the EDS, only a single slave device showed, and so the data for each module are in the stream of bytes returned to the DeviceNet network. Addressing each module is a question of analysis the bits and the bytes appropriate.

Thank you

Tennessee Paul

• IPETRONIK data with tiara Acquisition

  Hi everyone, I need to acquire data with Ipetronik tiara, anyone has an idea how to do? TKS for all.

  Hi RSilva,

  You have the tiara with the DAC and VISUAL panels visible?  If so, can you ask a more specific question?  The response of the whole situation is that you describe the acquisition of data using blocks and wires in the Panel of the DAC and discovers the results achieved, as they are streamed using the VISUAL Panel.

  There are local experts that at GM in the Detroit area.  Feel free to send me an email to [email protected] for the contact information for them.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• The Windows Easy Transfer of data application does not work if there are two windows of different language.

  I bought a data transfer cable and I tried to make a transfer of data from the laptop with non - English Windows XP Profesional a laptop with Windows 7 Home via WINDOWS EASY TRANSFER viz English.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer
  but I was surprised that I got a message "that a different language to the windows version has been so that data transfer can not live there. And above all, there was a message "that the data cable has not been detected."
  Microsoft is working with so many language versions, then why this simple problem is not solve upward? It cannot be too big problem to compensate for a versatile application that would work on all versions of Windows.

  No, it doesn't work of course between the various language versions, has never and will never be.  Will not be fixed either, because Windows XP is in the extended now support (only security patches issued) and becomes entirely non supported in about a year.  Save and move documents using a different method.

• I want to transfer the dates on my calendar for Windows (Vista) in my Samsung's Android phone calendar.

  I have installed Samsung Kies on my PC, but cannot work out how to transfer through synchronization.  My phone is a Galaxy Ace GT-S5830i.

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.

  According to the description, I see you want to transfer the date of Windows calendar to your Samsung android phone.

  To better assist you, please answer these questions:

  1. in what program the dates on the calendar are stored?

  2. you are trying to transfer from outlook?

  Kindly get back to us with information so that we can better help you: