Je009a HP 1910

Similar Questions

• Mac-mini - Denon AVR-1910 - Samsung HDTV HDMI

  Hello

  I have mi Mac mini connected via HDMI for the Denon AVR 1910 port. My HDTV (Samsung le37b530p7w) is also connected to the HDMI.

  The very annoying problem I have is that images and sounds "flicker" (go offshore and on) constantly.

  When that happens, I see HDMI, PCM, DTS indicator on the Denon going on and off like the Mac Mini and the Denon were synchronization/handshake. The TV picture go on and outside, and it shows as "searching for signal".

  I tried to connect the mac mini directly to HDTV, the flickering thing has not happened.

  I can't find my TV box or drive DVD/BR.

  I tried all the HDMI ports on the TV and the Denon AVR. It always happens and occurs only when the mac mini shows something.

  However, when I listen to music on the mac mini, but the TV is turned off (no picture on the TV, but the sound goes through the Denon AVR), flickering does not occur.

  I've read similar questions on the forum, but no real solution.

  Any help?

  Details of the material:

  Mac mini: end 2012, OSX El Capitan 10.11.4

  DENON AVR 1910

  Samsung HDTV le37b530p7w

  unless denon has a update of firmware for their APR I would say that the best bet would be to connect the mac to the tv and connect the TV to the denon

• 1910. How is the hard drive?

  One of my friends insisted on the fact that while his works of 1910 he will be using it. It slows down now die. Need information from the hard drive and I think that an easy! is to take out the hard drive and connect it to a new computer with easy IDE - only one problem - how you pull the HDD?

  None of the manuals, if don't need so tips - thanks in advance

  Chrissie

  Hello Chris

  I could not find any information about it. This device is not for me. If you know someone with technical experience ask him for help. If you wish, you can call service partners in your country. Maybe they can give you instructions and specific answer.

  Good bye

• Routing to the unauthorized via switch Ethernet HP 1910 169.254.0.0/16 subnet

  Hello

  I have a somewhat unusual situation at a customer site. They have an HP 1910 as a default gateway on their local network Ethernet switch. This is related to a Fortigate Firewall with a regular DSL connection and a WAN link to emote subnets. The question we have is that a new remote site has become active on the Wan. The unusual thing is that they have a 169.254.0.0/16 subnet. Don't ask me why this address range has been used but it is there. (169.254.0.0/16 is a space of address reserved for windows clients that cannot receive an IP via DHCP)

  The client is when they try and access a resource on 169.254.0.0/16 through the switch and on the Wan of the HP 1910 switch removes the packages and will not pass them. I have trioed add static routes on the switch, but it does not transmit packets 169.254.0.0/16. Al, the other traffic is very well. Has anyone ever encountered this weird behavior?

  I think I knew the people. Article 2.7 of the RFC section https://tools.ietf.org/html/rfc3927 which States that to 169.254.0.0/16 packages be sent to layer 3.

  Do not know why some devices transmit these packets, but it seems that best practices is for devices of L3 to drop packets that have 169.254.0.0/16 in their source/destination IP address fields.

• Media player for ipaq 1910

  I have a hp 1910 and you want to install a media player to play most of the music files can someone help me find the correct media player for this large but old pocket pc?

  Hello

  I suggest you go through the manual guide for iPAQ h1910 pocket pc by downloading it from the following link:

  http://h20000.www2.HP.com/BC/docs/support/SupportManual/c00658285/c00658285.PDF?JumpID=reg_R1002_USEN

  It is started in the guide that to use Windows Media Player, you must install Windows Media Player from the CD HP iPAQ Pocket PC Companion. (Pg 5-10 reference guide)

  So, I ask you to contact your pocket pc manufacturer for the fixed number.

• Apple TV 4

  I sound surround with a Denon AVR-1910 and a Panasonic TV - then ran television and optical cable from TV to TV receiver HDMI (3 locations) of Apple TV and also tried DVR slot - not sure what view the Denon is on - so far I could not get the Apple TV noise to work on the need for sound - surround i help

  Thanks in advance

  What model # TV?

• Missing export photos 2 photos

  Hello

  I have all my photos stored in iCloud and have set photos on my Mac to 'download the originals '. I have an album in the photos app with pictures of 1912 in it I tried to export using the original unmodified export option. When I do that I get that 1910 pictures exported, but if I export them by copy - paste of the album I get the 1912 full.

  I also tried to use the Flickr Uploadr and Upload Photos Google to see how they recognize and these too only recognize pictures of 1910.

  Someone knows something similar? I can't work on why the numbers are different. I have only imported into photos and did not any changes/changes to one of the photos.

  Thank you

  Export with "file > export > unmodified original export" can translate into less exported images that export versions published with "file > export > export... photos" or by dragging pictures from the browser to a folder.

  If photos in your album are modified of the same original image file versions, the original will only be exported once, if you export the originals, but each modified version will be exported, if you export versions with "file > export" or dragging to the desktop versions.

  For example, this album has three versions of the same photo:

  

  When I export with "file > export > export original unmodified ', just one original is exported, because all three pictures are versions of the same original. But dragging three thumbnails on the desktop will create three files of different images, showing the changes.

• failed loading ftsata2 driver

  Compaq Presario 1910 (6 years) XP SP3. After a recent major download from windows update, I started having 7026 error in the system event viewer: the next (s) start or start failed to load system: ftsata2. Never heard of him before and a HP site search is a not enlightened me everything. From what I found (which is way beyond my level of understanding), I do not know here, there is any program (something to do with the promise RAID) on my machine that uses this driver.

  Can it be deleted safely or where can I find the correct driver? I'm totally confused no plain English explanations or help would be appreciated

  Hello cbh5550,

  Try to select a driver to start on demand and see if this helps solve the problem.

  1. click on start

  2. click on Control Panel

  3. then system

  4. Select Hardware

  5. click on Device Manager

  6. under view, select "Show hidden devices".

  7 expand Non Plug-and-Play drivers

  8. find the ftsata2 and right click and select Properties

  9. go to the driver tab

  10. and then under Type of request

  Let me know if this helps solve your problem.

• Scorecard 4 does not accept entries from 2010.

  I am also using the 4 card and having the same problem as textoby.  Boy are my foires handicaps.  I have try several ways to enter data, but all I get is 1910 ir 2000.  My disabilities are terribly messedup.  Someone please help!

  Hello
   
  Could you please answer these money questions?
   
  (a) elaborate on dashboard 4?
  (b) tell us the exact error message?
  (c) from when are you facing this problem?
  (d) do you have the latest changes on your computer?
  (e) did you check the compatibility of the program with Windows 7?
   
  Please note that if you find problems with the program, then you must perform a verification of the compatibility of the program with Windows 7 and check.
   
  For compatibility, you should follow the link below.
   
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/
   
  I suggest you to disable any program of security on your computer and check if it solves the problem.
   
  After reviewing the question you must reactivate the security on your computer program.
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Envy 17 built-in screen went black after system updates.

  Hello!

  Earlier today, after updates monthly to Win 7 Home Prem (64 bit, Engl.)  I had the problem with the display of colors with my HP Envy 17. It turns out that caused Windows Silverlight (?) to indicate only a few 256 colors (?). So I plugged another screen (Samsung 22 inch SyncMaster) as external monitor to the computer.  This worked OK. So, I removed the updates of windows outside one by one, starting system after each file. After the removal of Silverlight, the built-in screen returned to original resolution and colors (1910 * 1080, 60 Hz, 32-bit). Then I reinstalled all the other updates and started the system. So far, I was happy. The original problem has been resolved.

  Then, I checked the status of HP Support Assistant. He suggested the update of the program itself and some 5 other updates. I've updated the HP Support Assistant first.  That went well, I guess. After the system start, I checked the other updates the new version of HP Support Assistant suggested. This includes for example. update the BIOS and 4 other updates. After download and installation of these, system startup has produced, triggered by the update. OK to start the system, and Windows started a little. But then the screen integrated (HP laptop) do not continue to see the picture more, external only display gave the image. I used the double at this stage display mode. -Only when you start Windows in safe mode, the screen seems to work, but with a limited resolution and properties.

  I tried to change display modes (dual Extended display, disconnect, projector only), but the screen does not appear. Or, if we turn off the lights (black room), one can imagine to be able to see a light screen Veery also (built-in display) - so some photos also forms in this case (the built-in screen of HP Envy 17). Remove the external display and the system startup without it does not help.

  Please help me and teach how to bring back the computer screen in life!

  BR, Alfa68

  Hello.

  Just letting you know that the screen of my HP Envy 17 2050ea now works fine! What helped was a call to the local HP support; Today, I managed to pass through. He suggested to delete the display driver that I did in Safe Mode, as the built-in screen still worked. I've done the following:

  * I started the system using Windows Mode safe mode with networking (press F8 to get there after startup)

  * The I went to the Device Manager (you can use the start search to find)

  * There, I chose the graphics cards. With the right button of your mouse, I have selected to uninstall the display Radeon (TM) driver. In my case it was Radeon (TM) HD 6850 M.

  * After the driver has been uninstalled, I started the system. System booted normally (complete Windows).

  * Now the display settings were a little strange, but the screen has worked

  * After a minute or two, automatic update of the display driver has occurred. System infomed me to this topic. Then I rebooted, to allow the driver to use.

  * After reboot my screen was back to normal, as it was before the problem.

  Summary: The problem has been resolved through resettlement of the display driver. Fortunately, heavy recovery or reinstallation of the entire system was not necessary.

  WKR, Alfa68

• Impossible to prevent (dfrgntfs.exe) Disk Defragmenter to run during System Idle

  How can I prevent the Disk Defragmenter Windows (dfrgntfs.exe) tool to launch automatically when my Windows Vista machine is idle?  I defragment my hard disk with IObit Smart Defrag software and do not want the Windows defrag utility constantly re-organization of the files on my hard drive once I optimized the placement of files with Smart Defrag.

  I checked the Windows Disk Defragmenter tool (start |) All programs | Accessories | System Tools | Disk Defragmenter) and regular defrags are disabled (i.e., the checkbox "Run on a schedule" is disabled).  I checked Windows Task Scheduler (start |) Administrative Tools | Task Scheduler | Task Scheduler Library | Microsoft | Windows | Defrag) and the task of ScheduledDefrag also appears as disabled here.

  My hard drive is formatted with the NTFS file system and my Norton Internet Security 2010 software Norton tasks window shows that dfrgntfs.exe starts about 30 minutes after my system goes into "idle" mode.  Is there another tool of Windows running in the background (for example, the Windows search indexing) which can be automatically trigger the Windows Disk Defragmenter?

  I hope that there is a simple configuration change or registry change that will stop the Windows Disk Defragmenter to run while it is idle, but still lets me run a manual defragmentation if I want to do.

  ___________

  MS Windows Vista Home Premium 32 bit SP2
  Internet Explorer 8.0
  NIS 2010 c. 17.7.0.12
  HP Pavilion dv6835ca Intel Core2Duo processor T5550 1.83 GHz, 3.0 GB of RAM, NVIDIA GeForce 8400 GS

  Lorien - one:

  Thanks for the quick response.  I'm failry certain that the ScheduledDefrag task in Windows Task Scheduler is not the culprit.  This task (and trigger) show that off and the task history shows that a regular defrag last ran on my system there is, over 2 years which is the time that I have disabled the checkbox "Run on a schedule" in the Windows Disk Defragmenter tool.

  I found a post today in the My Digital Life Forums (http://forums.mydigitallife.info/threads/1910-DfrgNtfs.exe-in-Vista-SP1) which suggests that there is a Vista boot optimization process that runs defragments dfrgntfs.exe whenever you reboot your system, even if in the application are disabled.  Is recommended that a response to stop dfrgntfs.exe to run after every reboot:

  1. open the Windows registry (run > regedit)
  2. go to path
  3. change the "Enable" key of Y to N

  I found information on the Start function to optimize on the Microsoft TechNet Library website (http://technet.microsoft.com/en-us/library/cc778290 (WS.10) .aspx) which States that "Windows automatically optimizes for the optimization of startup file location. This optimization happens automatically if the system is idle for 10 minutes. Start optimization improves the start-up time to locate the startup files in contiguous clusters on the volume, reducing the movement of the head of the disc during playback of the volume".  I have no idea if third-party defragmenters like IObit Smart Defrag or Defraggler of Piriform can optimize the placement of these Windows startup system files or Boot Optimization provides some additional benefits to the performance of the system.

  I don't know if the Boot Optimization function is actually the cause of my origins unscheduled defragments but it's the only reasonable explanation I could find.  When these "silent" defragments happen on my system, they occupy more than 50% of my CPU and will last more than an hour (or until my system is idle).  I had problems with my system of freezing after it goes into idle mode (i.e., move my mouse or using the keyboard has no effect and I have to do a re-difficult start by turning off my laptop) and I begin to suspect that if this unscheduled defragmentation runs along with other tasks in the background (for example (, my daily QuickScan in Norton anti-virus) that a page conflict or lack of system resources could freeze my computer.

  I would appreciate hearing of a person who can confirm that the Boot Optimization function will trigger unforeseen defragments when Vista is idle or knows if the Boot Optimization function is all real benefits if you use a third-party Defragmenter.

• Several WMI errors, and I don't know what to do:)

  I have a DELL inspiron 1545 Windows Vista Home Premium 64 x. help: () I don't understand any of this either.

  The WMI Diagnosis wrote:

  .1816 17:26:30 (0) * WMIDiag v2.1 began Sunday, July 1, 2012 at 17:24.
  .1817 17:26:30 (0) *.
  .1818 17:26:30 (0) * copyright (c) Microsoft Corporation. All rights reserved - July 2007.
  .1819 17:26:30 (0) *.
  .1820 17:26:30 (0) * this script is not supported under a Microsoft standard support program or service.
  .1821 17:26:30 (0) * the script is provided AS IS, without warranty of any kind. Microsoft disclaims any
  .1822 17:26:30 (0) * implied warranties, including, without limitation, implied guarantees of marketability
  .1823 17:26:30 (0) * or adequacy has a particular use. The entire risk arising out of use or performance
  .1824 17:26:30 (0) * scripts and documentation remains with you. In any case, Microsoft, its authors,.
  .1825 17:26:30 (0) * or anyone involved in the creation, production or delivery of the script is responsible for
  .1826 17:26:30 (0) * damage whatsoever (including, without limitation, damages for loss of business profits,
  .1827 17:26:30 (0) * business interruption, loss of business information or any other pecuniary loss) arising out of
  .1828 17:26:30 (0) * the use or inability to use the script or documentation, even if Microsoft has been advised
  .1829 17:26:30 (0) * of the possibility of such damages.
  .1830 17:26:30 (0) *.
  .1831 17:26:30 (0) *.
  .1832 17:26:30 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
  .1833 17:26:30 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
  .1834 17:26:30 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
  .1835 17:26:30 (0) *.
  .1836 17:26:30 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
  .1837 17:26:30 (0) * User - Service pack 1 - Windows Vista 64-bit (6001) - "TVL-PC\TENORIO" on the computer "TVL - PC."
  .1838 17:26:30 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
  .1839 17:26:30 (0) ** Environment: ........................................................................................................ Ok.
  .1840 17:26:30 (0) * there is no missing file of WMI system:... Ok.
  .1841 17:26:30 (0) * there is no missing WMI repository files:... Ok.
  .1842 17:26:30 (0) * WMI repository state:... MORE LOGIC.
  .1843 17:26:30 (0) * AFTER you run WMIDiag:
  .1844 17:26:30 (0) * repository WMI has a size of:... 25 MB.
  .1845 17:26:30 (0) ** - Disk free space on 'C:': .......................................................................................... 168928 MB.
  .1846 17:26:30 (0) *-INDEX. BTR, 3448832 bytes, 27/06/2012 06:07:38
  .1847 17:26:30 (0) *-MAPPING1. CARD, 72704 bytes, 27/06/2012 04:57:09
  .1848 17:26:30 (0) *-MAPPING2. CARD, 72704 bytes, 27/06/2012-06:07:38
  .1849 17:26:30 (0) *-OBJECTS. DATA, 22601728 bytes, 27/06/2012 06:07:38
  .1850 17:26:30 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
  .1851 17:26:30 (0) * INFO: status of the Windows Firewall:... PERMIT.
  .1852 17:26:30 (0) * Windows Firewall profile:... PUBLIC.
  .1853 17:26:30 (0) * which do not match a rule BLOCKED inbound connections:... PERMIT.
  .1854 17:26:30 (0) *-online this will prevent any WMI connectivity remotely to this computer with the exception
  .1855 17:26:30 (0) * if inbound following the three rules are ENABLED / non-BLOCKING:
  .1856 17:26:30 (0) *-"Windows Management Instrumentation (DCOM-In).
  .1857 17:26:30 (0) *-"Windows Management Instrumentation (WMI-In).
  .1858 17:26:30 (0) *-"Windows Management Instrumentation (ASync-In).
  .1859 17:26:30 (0) * check state reported for each of these three rules of inbound traffic below.
  .1860 17:26:30 (0) *.
  .1861 17:26:30 (0) * Windows Firewall 'Windows Management Instrumentation (WMI)' rule group:... PEOPLE WITH DISABILITIES.
  .1862 17:26:30 (0) *-online this will prevent all remote WMI to connectivity this machine.
  .1863 17:26:30 (0) *-you can set the configuration by running the following command:
  .1864 17:26:30 (0) * that is "NETSH. GROUP of RULES of GAME EXE ADVFIREWALL FIREWALL = "Windows Management Instrumentation (WMI)" NEW ENABLE = 'YES'
  .1865 17:26:30 (0) * note: with this command, all incoming and outgoing WMI rules are activated at the same time!
  .1866 17:26:30 (0) * you can also enable each individual rule rather than enable the rule group.
  .1867 17:26:30 (0) *.
  .1868 17:26:30 (0) * Windows Firewall rule "Windows Management Instrumentation (DCOM-In):... PEOPLE WITH DISABILITIES.
  .1869 17:26:30 (0) *-online this will prevent any WMI DCOM inbound connectivity to this machine.
  .1870 17:26:30 (0) * note: the rule of the "Windows Management Instrumentation (DCOM-In)" rule must be ENABLED to allow the incoming WMI DCOM connectivity.
  .1871 17:26:30 (0) *-you can set the configuration of this rule by running the following command:
  .1872 17:26:30 (0) * that is "NETSH. EXE ADVFIREWALL FIREWALL SET RULE NAME = "Windows Management Instrumentation (DCOM-In)" NEW ENABLE = YES
  .1873 17:26:30 (0) *.
  .1874 17:26:30 (0) * Windows Firewall rule "Windows Management Instrumentation (WMI-In):... PEOPLE WITH DISABILITIES.
  .1875 17:26:30 (0) *-online this will prevent any WMI inbound connectivity to this machine.
  .1876 17:26:30 (0) * note: the rule of the "Windows Management Instrumentation (WMI-In)" rule must be ENABLED to allow the incoming WMI connectivity.
  .1877 17:26:30 (0) *-you can set the configuration of this rule by running the following command:
  .1878 17:26:30 (0) * that is "NETSH. EXE ADVFIREWALL FIREWALL SET RULE NAME = "Windows Management Instrumentation (WMI-In)" NEW ENABLE = YES
  .1879 17:26:30 (0) *.
  .1880 17:26:30 (0) * Windows Firewall rule "Windows Management Instrumentation (WMI-Out)":... PEOPLE WITH DISABILITIES.
  .1881 17:26:30 (0) *-online this will prevent any asynchronous outbound connectivity this machine WMI.
  .1882 17:26:30 (0) *-you can set the configuration of this rule by running the following command:
  .1883 17:26:30 (0) * that is "NETSH. EXE ADVFIREWALL FIREWALL SET RULE NAME = "Windows Management Instrumentation (WMI-Out)" NEW ENABLE = YES
  .1884 17:26:30 (0) *.
  .1885 17:26:30 (0) * Windows Firewall rule "Windows Management Instrumentation (ASync-In):... PEOPLE WITH DISABILITIES.
  .1886 17:26:30 (0) *-online this will prevent all incoming asynchronous connectivity WMI for this machine.
  .1887 17:26:30 (0) *-you can set the configuration of this rule by running the following command:
  .1888 17:26:30 (0) * that is "NETSH. EXE ADVFIREWALL FIREWALL SET RULE NAME = "Windows Management Instrumentation (ASync-In)" NEW ENABLE = YES
  .1889 17:26:30 (0) *.
  .1890 17:26:30 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
  .1891 17:26:30 (0) ** DCOM Status: ........................................................................................................ Ok.
  .1892 17:26:30 (0) ** WMI registry setup: ................................................................................................. Ok.
  .1893 17:26:30 (0) * INFO: WMI service has dependents:... 2 SERVICE (S)!
  .1894 17:26:30 (0) *-Security Center (WSCSVC, StartMode = 'Auto')
  .1895 17:26:30 (0) *-(ICS) (SHAREDACCESS, StartMode = 'Disabled') Internet connection sharing
  .1896 17:26:30 (0) *-online if the WMI service is stopped, or the services listed should be stopped as well.
  .1897 17:26:30 (0) * note: If the service is marked with a (*), this means that the service application / use WMI, but
  .1898 17:26:30 (0) * there is no hard dependency on WMI. However, if the WMI service is stopped.
  .1899 17:26:30 (0) * this can prevent the application of service / to work as expected.
  .1900 17:26:30 (0) *.
  .1901 17:26:30 (0) ** RPCSS service: ...................................................................................................... OK (already begun).
  .1902 17:26:30 (0) ** WINMGMT service: .................................................................................................... OK (already begun).
  .1903 17:26:30 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
  .1904 17:26:30 (0) * for the WMI service DCOM configuration:... Ok.
  .1905 17:26:30 (0) * components WMI DCOM registrations:... Ok.
  .1906 17:26:30 (0) * records WMI ProgID:... Ok.
  .1907 17:26:30 (0) * for the WMI provider DCOM registration:... Ok.
  .1908 17:26:30 (0) * registrations CIM WMI provider:... Ok.
  .1909 17:26:30 (0) * provider WMI CLSID:... Ok.
  .1910 17:26:30 (0) * availability EXE/DLL WMI providers:... Ok.
  .1911 17:26:30 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
  .1912 17:26:30 (0) * INFO: User Account Control (UAC):... PERMIT.
  .1913 17:26:30 (0) *-online tasks WMI requiring administrative privileges on that computer MUST run in a high context.
  .1914 17:26:30 (0) * that you can run your scripts or commands from an elevated command WMIC
  .1915 17:26:30 (0) * fast by right click on "Command Prompt" from the Start Menu icon and
  .1916 17:26:30 (0) * by selecting 'run as administrator '.
  .1917 17:26:30 (0) * that you can also run the WMI scripts or WMIC commands as a task
  .1918 17:26:30 (0) * in the Task Scheduler in the context of security.
  .1919 17:26:30 (0) *.
  .1920 17:26:30 (0) * INFO: filtering Local account:... PERMIT.
  .1921 17:26:30 (0) *-online tasks WMI to access WMI information on this computer and that requires remote administration
  .1922 17:26:30 (0) * privileges SHOULD use part of the DOMAIN of the Local computer administrators group account
  .1923 17:26:30 (0) * to ensure that the privileges are granted. If a Local user account is used for outdoor
  .1924 17:26:30 (0) * access, it will be reduced to a simple user (filtered token), even if it is part of the Local Administrators group.
  .1925 17:26:30 (0) *.
  .1926 17:26:30 (0) * global DCOM security status:... Ok.
  .1927 17:26:30 (0) * overall WMI decision:... Ok.
  .1928 17:26:30 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
  .1929 17:26:30 (0) * permanent SUBSCRIPTION WMI (S):... NONE.
  .1930 17:26:30 (0) * WMI TIMER method:... NONE.
  .1931 17:26:30 (1). ERROR: CONNECTION to WMI MONIKER errors occurred for the following namespaces:... 1 ERROR (S)!
  .1932 17:26:30 (0) * - root, 0 x 80041021 - (WBEM_E_INVALID_SYNTAX) query is syntactically invalid.
  .1933 17:26:30 (0) *.
  .1934 17:26:30 (1). ERROR: CONNECTION WMI errors occurred for the following namespaces:... 16 ERROR (S)!
  .1935 17:26:30 (0) * - root, 0 x 80041008 - (WBEM_E_INVALID_PARAMETER) one of the parameters to the call is not correct.
  .1936 17:26:30 (0) * - root, 0 x 80041008 - (WBEM_E_INVALID_PARAMETER) one of the parameters to the call is not correct.
  .1937 17:26:30 (0) *-root/subscription, 0 x 80041008 - (WBEM_E_INVALID_PARAMETER) one of the parameters to the call is not correct.
  .1938 17:26:30 (0) *-root / DEFAULT 0 x 80041008 - (WBEM_E_INVALID_PARAMETER) one of the parameters to the call is not correct.
  .1939 17:26:30 (0) *-Root/CIMV2, 0 x 80041008 - (WBEM_E_INVALID_PARAMETER) one of the parameters to the call is not correct.
  .1940 17:26:30 (0) *-Root/CIMV2/security, 0 x 80041008 - (WBEM_E_INVALID_PARAMETER) one of the parameters to the call is not correct.
  .1941 17:26:30 (0) * - Root/CIMV2/Applications, 0 x 80041008 - (WBEM_E_INVALID_PARAMETER) one of the parameters to the call is not correct.
  .1942 17:26:30 (0) *-root/Pan, 0 x 80041008 - (WBEM_E_INVALID_PARAMETER) one of the parameters to the call is not correct.
  .1943 17:26:30 (0) *-root/SECURITY, 0 x 80041008 - (WBEM_E_INVALID_PARAMETER) one of the parameters to the call is not correct.
  .1944 17:26:30 (0) *-root/WMI, 0 x 80041008 - (WBEM_E_INVALID_PARAMETER) one of the parameters to the call is not correct.
  .1945 17:26:30 (0) *-root directory /, 0 x 80041008 - (WBEM_E_INVALID_PARAMETER) one of the parameters to the call is not correct.
  .1946 17:26:30 (0) *-root/directory/LDAP, 0 x 80041008 - (WBEM_E_INVALID_PARAMETER) one of the parameters to the call is not correct.
  .1947 17:26:30 (0) *-root/SecurityCenter, 0 x 80041008 - (WBEM_E_INVALID_PARAMETER) one of the parameters to the call is not correct.
  .1948 17:26:30 (0) *-root/Microsoft, 0 x 80041008 - (WBEM_E_INVALID_PARAMETER) one of the parameters to the call is not correct.
  .1949 17:26:30 (0) *-root/Microsoft/HomeNet, 0 x 80041008 - (WBEM_E_INVALID_PARAMETER) one of the parameters to the call is not correct.
  .1950 17:26:30 (0) *-root/aspnet, 0 x 80041008 - (WBEM_E_INVALID_PARAMETER) one of the parameters to the call is not correct.
  .1951 17:26:30 (0) *.
  .1952 17:26:30 (0) ** WMI GET operations: ................................................................................................. Ok.
  .1953 17:26:30 (0) * representations WMI MOF:... Ok.
  .1954 17:26:30 (0) * WMI QUALIFIER access operations:... Ok.
  .1955 17:26:30 (0) * WMI ENUMERATION operations:... Ok.
  .1956 17:26:30 (0) * WMI EXECQUERY operations:... Ok.
  .1957 17:26:30 (0) * operations WMI GET VALUE:... Ok.
  .1958 17:26:30 (0) * WRITE WMI operations:... NOT TESTED.
  .1959 17:26:30 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
  .1960 17:26:30 (0) * WMI DELETE operations:... NOT TESTED.
  .1961 17:26:30 (0) * the static instances of WMI retrieved:... 0.
  .1962 17:26:30 (0) * WMI dynamic instances retrieved:... 0.
  .1963 17:26:30 (0) * WMI instance request cancellations (to limit the performance impact):... 0.
  .1964 17:26:30 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
  .1965 17:26:30 (0) *.
  .1966 17:26:30 (0) * 1 error (s) 0 x 80041021 - (WBEM_E_INVALID_SYNTAX) query is syntactically invalid
  .1967 17:26:30 (0) *.
  .1968 17:26:30 (0) * 16 errors 0 x 80041008 - (WBEM_E_INVALID_PARAMETER) one of the parameters to the call is not correct
  .1969 17:26:30 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
  .1970 17:26:30 (0) * installation of WMI registry key:... Ok.
  .1971 17:26:30 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
  .1972 17:26:30 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
  .1973 17:26:30 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
  .1974 17:26:30 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
  .1975 17:26:30 (0) *.
  .1976 17:26:30 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
  .1977 17:26:30 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
  .1978 17:26:30 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
  .1979 17:26:30 (0) *.
  .1980 17:26:30 (0) * ERROR: detected WMIDiag to problems that could prevent WMI works properly!  Check ' C:\USERS\TENORIO\APPDATA\LOCAL\TEMP\WMIDIAG-V2.1_VISTA. CLI. SP1.64_TVL - PC_2012.07.01_17.24.07.LOG' for more details.
  .1981 17:26:30 (0) *.
  .1982 17:26:30 (0) * WMIDiag v2.1 ended Sunday, July 1, 2012 at 17:26 (s: 1 W:29 E:23).

  Hello

  See the link below and check if it helps.
  http://TechNet.Microsoft.com/en-us/library/ee692772.aspx
   
  See also:
  http://msdn.Microsoft.com/en-us/library/ff647451.aspx
   
  If the links above do not solve the problem. . Please visit the link below to find a community that will support what ask you
  http://social.msdn.Microsoft.com/forums/en-us/categories
   
  Hope this information helps.

• Impossible to check the level of ink HP Deskjet 3050 J610

  I'm unable to check the ink level. When I go to:

  Control Panel\Hardware and Sound\Devices and Printers\HP Deskjet 3050 J610 series

  I get only 'see what's printing","Set preferences"and"customize your printer.

  

  How can I solve this problem?

  When I bought it. I installed all the software from the CD and that's all, but for some reason any here is no more.

  Operating system is Win7 64 bit

  When I run CD > add more software "already installed" read here at the end.

  I uninstalled HP Deskjet 3050 J610 series and then I reinstalled the CD software.

  When I uninstalled it, I got error:

  Warning of 1910. Could not remove shortcut HP Deskjet 3050 J610 series Scan.Ink. Verify that the shortcut file exists and that you can access.

  And after that I reinstalled the software and now it works.

  I'm crazy enough to forget that I had the CD and I could do it.

  Thanks for help.

• Original Windows indicating error is not authentic.

  My pc is hp 1910 m model is p6720in, processor Intel i3, 2 GB ram, 64-bit.

  I am running windows 7 Basic.

  MY problem is that when I restart my computer, a few hours after that a message appears that "you can be a victim of software counterfeiting". Even, if I'm original Windows. When I restart again, the message disappears, but the gain pop up after a few hours.

  

  

  I used it fine for 3 years, but the problem started showing 2-3 weeks before.

  I don't remember if he began to appear after installing software or not.

  As you can see in the photo above, is to show that "not available" status and "unavailable product ID.

  According to the 1st image.

  I clicked on go online and solve now.

  But I can't seem to download the link below.

  

  Help, please. I'm fed up with this problem

  I would recommend that you back up your personal files and reinstall Windows 7.

  http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/
  http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/

  If there are special settings you want saved, I suggest also create you a backup of Windows Easy Transfer:

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For HP, press F11 directly after switching on the device

• Someone at - it issues after the update of VRT 2016-02-29-001?

  Seems VRT last update broke the power of fire this morning in my lab at home. ASA X 5506. cannot install policies and syslog shows:

  2 March 2016 04:16:05 snort [9939] of firepower: FATAL ERROR: dynamic detection library "/ var/sf/detection_engines/*GUID*/so_rules/protocol-scada.so" version 1.0 update with the version of the engine dynamic library 2.5 is not compatible with the current engine dynamic library ' / var/sf/detection_engines/*GUID*/libsf_engine.so ' version 2.4.

  Seems/var/cisco/deploy/pkg/var/cisco/packages/modules-1910-x86_64/so_rules installed by the update a incompatible libraries...

  Managed to solve the problem by connecting to the ssh/console and by:

  sudo bash
  CD/var/sf/detection_engines / * GUID *.
  MV so_rules so_rules.old
  ln-s/var/cisco/deploy/pkg/var/cisco/packages/modules-1908-x86_64/so_rules so_rules

  Replace * GUID * above with the identifier unique on your system.

  And then push policies. Required URL filtering a restart of the module in order to start working again.

  Not sure, it is a recommended fix, but a good thing it is only a laboratory.

  It happened to someone else here?

  Hello

  Yes, there was a problem with the SRU version and it was taken out of the OCC.

  If you are on recommendation 6.0 is to upgrade the SRU that was released today and apply policy again.

  Kind regards

  Aastha Bhardwaj

  Rate if this is useful!