Jet pilots series II for Windows 8.1 laser

Similar Questions

• DeskJet 9600 series drivers for Windows 8

  Hello

  I have a Deskjet 9650.  With Windows 7, I could just install the driver of 9800 manually, as explained here:

  http://support.HP.com/us-en/document/c01796821

  And that worked fine.  Now that I've updated to Windows 8, there is not a driver of 9800 included with Windows, and when I install the HP printer Installation Wizard:

  http://support.HP.com/us-en/document/c02691615

  He said: there is not a driver available.

  Someone at - it a link to the driver for Win8 9800?  I would like to install manually.

  Hi ohnoezitasplode,

  I can't wait to hear that you have questions.  Please see the steps below to add a printer manually driver.  9600 driver are not available through Windows 8; However, there are several drivers that would provide similar functionality.

  1. from devices and file of the printer (Panel-material control & sound-devices & printers)

  2. right click on the image of the installed printer (if the printer is not added, be sure to add in it)

  3. click on printer properties

  4. from the Properties dialog box, click the Advanced tab

  5. click on new driver (button in the middle of the dialog box)

  6. run the wizard

  7. when the dialog box is open, click HP under manufacturer

  8 look for deskjet 9600, 9800, 6520 drivers, 990c, or 5520 drivers of class like these classes should provide similar functionality

  NOTE: If a windows update is available be sure to fill out before you add the driver manually to make sure that all drivers are listed

• Pilot missing PCI for Windows 7

  I have an E machine modem and it came with windows XP. I bought windows 7 upgrade, and he tells me that my PCI driver is not installed. How can I get my PCI driver

  With the model number of your e-machine, it is difficult to help.

  Your best place to start here:

  http://support.gateway.com/us/en/EMAC/product/

• HP pavilion ab032tx 15: need driver for bus controller universal series (usb) for windows 7 64-bit hp pavilion 15 ab032t

  Here r my hardware ID

  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_8096103C & REV_03
  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_8096103C
  PCI\VEN_8086 & DEV_9CB1 & CC_0C0330
  PCI\VEN_8086 & DEV_9CB1 & CC_0C03

  Sasi.

  Try this.

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71908.exe

  Reset.

  REO

• Drivers for Windows Server 2008 R2

  PE1950, 2950 and MD3000i MPIO on Windows Server 2008 R2

  We're trying to nail a few dates to migrate our W2K8 R2 platform and plan the project.  We have most of our technical plans in place, and we have the code.  We have no Dell drivers however and there are several suspicious communications from Dell on this topic...

  Case #1: http://en.community.dell.com/blogs/insideit/archive/2009/08/10/ready-for-the-transition-dell-provides-support-for-windows-server-2008-r2.aspx

  Note:

  • Our engineers have missed on countless piano recitals, songs and episodes of American Idol while spending thousands of hours of testing and validation to make sure that dy products Dell running Windows Server 2008 R2 are the business-rea.
  • We have pilot complete support for Windows Server 2008 R2 for Dell hardware so you can deploy, run and manage easily. You can go here to download the drivers.

  If you view the service labels in our support of similar product groups, you will find an R2 option for servers... but the only public services on the PowerVault MD3000i you don't find any reference to R2 at all.

  Case #2: http://www.delltechcenter.com/page/Supportted+Dell+PowerEdge+Systems+for+Microsoft+Windows+Server+2008+R2+Beta

  This is a list of Beta for PE obviously compatible servers, however it would make sense If Microsoft has included natively the right drivers for the Dell hardware in the distribution of Microsoft R2 RTM so, just can't find any supporting documentation and do not know if the network drivers are compatible with MD3000i.

  #3: There are a few hacks to get drivers Windows 2008 MPIO inherited working with the RC R2 & MD3000i on this forum, but no reference to R2 in the MD3000i matrix and nothing on the site... it's why, we have wondering again where are the good drivers for R2 RTM?

  Can you be it someone from Dell and or this forum please send information on these issues?

  #1: driver compatibility of matrix for Windows Server 2008 R2 running on PE1950 and connected to an MD3000i PE2950 is a supported configuration?  (Code R2 RTM was released to Microsoft volume license customers)

  #2: the network drivers for the host machines included in the support of Windows Server 2008 R2 RTM?  If this is true, are the drivers MPIO for MD3000i and iSCSI Dell other platforms included in the support of Windows Server 2008 R2 RTM as well then?

  #3: If all the answers are not questions #1 and #2... could someone PLEASE contact people of pilot certification on Dell to see if they are same in QA at this point, if they plan to update and display an estimated date of implementation?  We have contacted tech support, but received very vague answers on anything with R2 at this stage.  There is a business directory and a path to escelation for support tickets, but the midrange as this makes it much easier to share information for the masses, we just have not yet found.

  Thanks for your information, comments and your support!

  OptimalState

  I was finally sent to someone who could give me some information on this within Dell, here's what they said:

  PE 1950/2950 drivers:

  The pilot should be included natively in Windows Server 2008 R2 media, and if so, would these drivers would be supported by Dell in a production scenario.

  MD3000i:

  I know that we will not issue a new MDSM which will fund 2008 R2 until sometimes in October. The MD3000i requires MPIO to the MD3000i and Dell drivers driver installation to work properly. I'll see if there is other information that I can find. I understand your frustration and engineer told me that this has been corrected in the next MDSM and MD3000i firmware version in October.

  So, it looks like October before MD3000i will be supported.

  OptimalState

• Graphics drivers for Windows 7 RTM on T61p

  Last night I downloaded and installed Windows 7 Professional x 64 RTM of MSDNAA and went on the time-consuming process of reinstalling all of my software.

  This morning I tried to run some programs and got a 3d acceleration is disabled message. OK I download and install the driver. First I tried to download the driver of 570 m lenovo NVIDIA, but it gave me the error "this driver does not support my operating system. I went to nvidia to download the driver and downloaded the quadro fx series laptop for windows 7 x 64 driver. I thought that defnitely wouldn't work, but by my ad here, you know it didn't.

  Any ideas?

  Edit: I should mention that I ran RC of Windows 7 Ultimate x 64 before and I was able to install the graphics drivers very well.

  Well, I solved the problem by downloading the vista x 64 driver and by running the Setup utility. I don't know why it worked this time when she has no previous 5 times, but I can't really complain.

• Laser Jet 4000N: printer driver for Laser Jet 4000N to work with Windows 10 (64-bit)

  Hello

  Could you please tell me what I can use for HP Laser Jet driver done 4000N (with 10 (64-bit) Windows).

  The driver is available? If not, is there an alternative?

  During the installation of the printer, Windows 10 offers the following drivers: (all are for HP Laser Jet 4000 series):

  PCL5

  PCL6

  PS

  and for HP Laser Jet Series 4050:

  PCL 5

  PCL6

  PS

  Thank you in advance for your help!

  Hello Cyber,

  The best for these printers is the PCL 6 driver.

  Kind regards

• HP Officejet J3600 Series for Windows 7 device driver

  I can't get my printer to work!  I installed different versions of the software, and every time I said that there is not a driver that exists for the HP Officejet J3600 series.  Does anyone have any suggestions?

  I uninstalled the software several times, and I tried to install with Microsoft plug-and-play decisions.  I went from the other way and I asked HP what is desired and installed from their point of view.
  I've just updated my Windows Vista computer to Windows 7.  There is a significant update of Windows Update that tries to install, but it fails every time.  This update is HP - printers - HP Officejet J3600 series 63.9 MB and it was published on 02/07/2011, but it gives me "Code 800F0246 Windows Update encountered an unknown error".  I found that the print spooler was not, which allegedly allowed other printers at work, but not my HP Officejet J3680.
  Thank you in advance,
  Bryan

  Palcouk,

  Thank you for your help in this matter!
  Yes, I did contact the PC manufacturer and the hardware manufacturers of printer support site for the software, both are HP.  I also tried to install the basic printer driver as the complete software, but neither attack could solve the problem.  These efforts included a complete removal of the software from my system, reboot and all.  I tried plugging in is not the printer until you are instructed to do and I also tried to connect the printer, using the plug-n-play in order to have the windows to find the correct drivers, but no attempt would not work.  These are good ideas!
  The solution ends up being a deletion of the printer driver for another printer that has already been installed when I was with Vista.  This driver is not compatible with Windows 7 and was originally the 'print spooler' to stop and cause other installation failure.
  Technical support at the University said that they eventually remove the other printers on the computer system;  then restart the print spooler by clicking the Start button, the search for 'Services', the program opens, scrolling to "Print spooler", selecting and clicking on "start the service"; and then install the software of the printer as usual.  The printer works fine now!  Yay!
  PS You are absolutely right about the existence of a difference between important and recommended updates.  When I got my printer connected to the computer and I tried to update by using windows update, I think he said it was an optional update, but when the printer was not connected, the update did not show.  I think you're right, it was only a recommended update.  Thank you for this fix!
  P.P.S.  I'm sorry, I can see how you might have thought that he wasn't no matter what printer driver.  There was, I think, 5 drivers for the printer that were to be installed.  Four installed without any problem (I think they were to scan, fax, USB printers and one another, but that of the HP Officejet J3600 series did not and he said that he was not a pilot that exists for installation).  After the correction of the University, it is installed without any hitch.
  I hope this helps those of you who may have similar problems!
  Sincerely and gratefully.
  Bryan Millet

• Office Jet pro 8610: Office Jet pro 8610 for windows server 2008 R2

  I got the new Office Jet pro 8610 prither but does not have the driver for "Windows Server 2008 R2 Enterprise" 64-Bit.

  What to do now. Can you please provide?

  Thanks in advance.

  Hello

  The same driver as expected for any operating system like Windows 7 or 8 must be used, however, the installation should be launched via the command line and not as a standard installation.

  Follow these steps to install the software of the printer on a server:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8610-e-all-in-one-printer/5367603/model/5367606/document/c03351547

  Shlomi

• Driver for Laser Jet P1005 for Windows 8.1 Pro 64-bit

  Hello. Desperately looking for Laser Jet P1005 for Windows 8.1 Pro 64 bit drivers. Is it still out there? Can if so someone you please provide a link? Thank you.

  Hi @Evanescenc3,.

  I see by your post that you are looking for 64-bit Windows 8.1 for the Laserjet P1005 drivers. I can help you with this.

  Here's the URL to the printer drivers. Base driver HP LaserJet P1000 P1500 Hostbased Plug-and-Play.

  You can also select the tab for the installation. It provides the steps for installation.

  If you need help, let me know.

  Good day!
  Thank you.

• Update security for Windows Media Encoder 9 Series for Windows Vista... Error details: Code 6B9__

  I tried several times to install the security update for Windows Media Encoder 9 Series for Windows Vista. It downloaded, but everytime I try to install it about half way through the installation it is said that it was cancelled and I got 6 b 9 error Code.  I can download and install other updates without any problem.

  Hi Ms. Morrill,

  Welcome to Microsoft Windows Vista Forums.

  You can use the tool it Fix to reset Windows Update components using the link below:

  http://support.Microsoft.com/kb/971058/en-us

  After this step, try to install the update and if you get an error and then try to install mode safe

  To enter in safe mode follow the steps below:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the click the button Start the arrow next to the button lock , and then restart.

  2. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  For more information follow the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  You can try to install the update mode without failure and the link is the following:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=99beebc4-553a-46f8-8245-e3d932306c93&displaylang=en

  Hope this information is useful.

  Suresh G

  Support Microsoft Answers

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I tried to find this scanner for Windows Server 2003 Standard Edition software, but even now, I'm not find software scan. Printer model: HP 3390 Laser jet

  tried to find this scanner for Windows Server 2003 Standard Edition software, but even now, I'm not find software scan.
  Printer model: HP 3390 Laser jet

  I don't want the drivers.  I mean the software.  The drivers you get from the page server 2003 and the software from the page I referenced.   Otherwise, you need to contact HP, as they provide that software, not Microsoft.

  Steve

• can I delete update security for windows media player 9 Series (kb969878) if I have Media player 11 update?

  Can I delete update security for windows media player 9 Series (kb969878) if I have Media player 11 update?

  Hi Query1000,

  Since you have Windows media player 11 on the system, you can uninstall the update of security for Windows media player 9. This will also help increase disk space.

  Concerning

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• DeskJet 3900 series: what then I do with my printer hp deskjet 3900 Series, since there is no driver for windows 7?

  I need a software/driver to use my printer deskjet 3900 series Windows 7; HP and Microsoft should help me please

  Thank you

  Well, I found this.

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-DeskJet-3900-drivers-for-Windows-7-operating-system/TD-p/760507

  But the document is no longer available.  Printer must be very old.

• HP Pavilion DV4-2140us. Looking for Windows XP (32-bit) driver for Mobility Radeon HD 4000 series.

  I have a laptop HP Pavilion DV4-2140US AMD Turion II M520.  I'm looking for a Windows XP (32-bit) driver for Mobility Radeon HD 4000 series video card. I've upgraded HDD to a 1 TB hard drive and the partition for Windows XP (32 bit) power to a dual-boot between Windows 7 (64 bit) and Windows XP (32 bit).

  Hello:

  Please see if it works.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-85978-1&prodTypeId=12454&prodSeriesId=472276

  Paul