JO 6500 E70n-z keeps "forgetting" its host name.

Similar Questions

• How device Orchestrator properly resolve its host name and IP address?

  Hello.

  Someone knows how to make good DNS resolution for device Orchestrator in order to solve its own (full FQDN) host name and IP address according to DNS records?

  The problem is with the methods "System.resolveIpAddress ()" and "System.resolveHostName ()".

  The 'resolveIpAddress()' method returns the same so called IP with static IP address assigned to this device. And returns the domain the host's FULL name when it is called with 127.0.0.1.

  So when I call "System.resolveIpAddress ('192.168.1.50')", it returns "192.168.1.50" instead of FULL domain name.

  When I call "System.resolveIpAddress ('127.0.0.1')", it returns "vco.local.lan".

  The 'resolveHostName()' method returns 127.0.0.1 when it is called with FULL domain name or host name.

  When I call 'System.resolveHostName ('vco.local.lan')' or '('vco') System.resolveHostName' it returns 127.0.0.1 in both cases.

  utility 'nslookup' launched from the console device even work properly return FQDN by entering the IP and the return of the appropriate IP (192.168.1.50) when you enter the FULL domain name.

  Thank you.

  SSH to your device or access to the console and log in as root...

  Then, edit your file/etc/hosts

  -Remove any mention of your domain name FULL and hostname in there, the only things you'll want to go in the sense of:

  127.0.0.1 localhost

  Possibly restart the network service (perhaps not necessary, I did it on my own)

  After doing this, my phone began to show the fqdn when I chose the correct IP address in the configuration.

• Help create messages Syslog uses the router host name

  We currently have an IP SLA related to the EEM scripts that work great to send syslog messages to alert purposes.  However, I would like for each router that sends a syslog to send its host name using wildcards instead of the specified host name.  I'm guessing some sort of filtering would do the trick, but I can't find any good documentation on this topic.  That's what I currently have:

  ALS IP 1
  echo ICMP - 172.24.50.1 source-interface GigabitEthernet2
  threshold 250
  timeout of 1000
  frequency 5
  IP SLA annex 1 point of life to always start-time now

  !

  LAN_interface_Link_down event manager applet
  syslog "Interface GigabitEthernet2, state change downstairs" event model
  order cli action 1 'enable '.
  Action 2 syslog priority to information msg "command, LAN_interface_Link_down is running on C1-GrandView-PA-CSR1000-Recover... »
  3 wait 5 action
  Action4 cli command "configures terminal.
  action 5 'interface range t3 - 4 cli command.
  action 6 'closed' cli command
  Action 7 cli command 'end '.
  LAN_interface_Link_up event manager applet
  syslog event model "Interface GigabitEthernet2, altered state until.
  order cli action 1 'enable '.
  action 2 cli command "configures terminal.
  action 3 'interface range t3 - 4 cli command.
  Action4 "not shut" cli command
  Action 5 cli command 'end '.
  6 wait 15 action
  Action 7 syslog priority to information msg "command, LAN_interface_Link_up is running on C1-GrandView-PA-CSR1000-Recover... »
  Next_Hop_LAN_Unreachable event manager applet
  event track 10 low maxrun 40
  order cli action 1 'enable '.
  Action 2 syslog priority to information msg "command, Next_Hop_LAN_Unreachable is running on C1-GrandView-PA-CSR1000-Recover... »
  3 wait 5 action
  Action4 cli command "configures terminal.
  action 5 'interface range t3 - 4 cli command.
  action 6 'closed' cli command
  Action 7 cli command 'end '.
  Next_Hop_LAN_Reachable event manager applet
  event track 10 status place maxrun 40
  order cli action 1 'enable '.
  action 2 cli command "configures terminal.
  action 3 'interface range t3 - 4 cli command.
  Action4 "not shut" cli command
  Action 5 cli command 'end '.
  6 wait 15 action
  Action 7 syslog priority to information msg "command, Next_Hop_LAN_Reachable is running on C1-GrandView-PA-CSR1000-Recover... »

  You can use the action of information to gather the hostname:

  routername type info action 1.0

  message from syslog to action 2.0 "my name is $_info_routername.

• Firefox keeps forgetting the Zoom value by page...

  Hello!

  Surfing on the archives of Dilbert cartoons, I Zoom in the caricature of Sunday otherwise it's too small. But Firefox 4 keeps forgetting the zoom setting.

  Whenever I have click on the comic strip following or even refresh the setting page is back to the standard. This behavior is similar on all websites, for example google.

  Any suggestion? Thanks in advance! wohlgetan

  Make sure that you do not run Firefox in permanent private browsing mode.

  • https://support.Mozilla.com/kb/private+browsing
  • You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
  • To view the history settings and cookies, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck the box: [] "Permanent private browsing Mode.
  • http://KB.mozillazine.org/Zoom_text_of_web_pages
  • http://KB.mozillazine.org/browser.Zoom.siteSpecific
  • http://KB.mozillazine.org/toolkit.zoomManager.zoomValues
  • http://KB.mozillazine.org/zoom.minPercent
  • http://KB.mozillazine.org/zoom.maxPercent

• is it possible that an application on a virtual machine is faster than in its host?

  To measure the performance of our software on vmware, compare us the performance of vm compared to its host machine.

  We found that performance on three different machines showed a very different behavior, of 50% slower at 10% slower.

  And the strangest thing is that there is a single machine, his vm is faster than its host.

  Any help on the possible reasons is appreciated!

  Thank you!

  Additional information:

  The application is time CPU,.

  CentOS 6.2 for the vm and host,

  VMware Workstation 10.0.1 build-1379776

  Hardware Dell R720	VM vs host
  Xeon 2 CPU E5-2620 0 @ 2.00 GHz 12-Core, 32 GB	-50%
  Xeon 2 E5-2650 V2 2.60 GHz, 16 Core CPU, 32 GB	-10%
  Xeon 2 E5-2630 0 @ 2.30 GHz, 12 Core CPU, 64 GB	20%

  After eliminating the various factors, we finally understood the cause: hyper threading

  After that we switched off the hyper threading, everything became normal, the slower and faster virtual machines showed same performance.

  Host performance has even improved, about 10-20% faster than the virtual machine.

  Hope that this experience and this information can be useful for others in the future...

  Thanks for your help during our survey!

• My client has an operational Web site. He had me he recast in Muse. What do need me and how to publish the new design of its host/server?

  My client has an operational Web site. He had me he recast in Muse. What do need me and how to publish the new design of its host/server?

  Hi Jefffrey

  I think that your request is answered by live chat.

  Please do not hesitate to contact us again.

  Thank you

  Sanjit

• Can a VM be powered on / accessible after the physical location changes to its host?

  If all a virtual computer IP addresses are static and set on a local subnet. Then after that we moved the site from its host, these subnets defined previous is not reachable. When we readded the host in a new data center. Can we turn on the VM since all its subnets are not accessible?

  The ESX host is not communicating with the virtual machines it hosts on their IP address configured on the guest.  You can have the ESX hosts that virtual host running in a DMZ and other configurations in which the network of ESX configuration does not match the virtual machine.

  ESX communicates with the virtual computers for things like the time synchronization and the heartbeat of VMware Tools, but it does not use the network invited to for configuration to do.

• HTTPS connection to the server with the host name which has its IP address

  Hi all
  
  I work in a development of the solution where a server application is running in a machine and hosts of Application Service SOAP over HTTPS. The server has the certificates for its IP address. My client application tries to use the SOAP Service; but when I connect to the Application Server using the HOST name in the URL, I get the SSLException indicating that the HOST name does not match name the object.
  
  If I use the IP address in the URL, it works well - but I do not like the server application can move to different IP dynamiccaly - if you are using DNS is our solution to hide this complexcity from client applications.
  
  Help, please.
  
  Kind regards
  Kaja

  the HOST name does not match name the object.

  The host name does not have the name of the topic in the server certificate. He agrees with host.domain name.

• VAMI will not keep the host name...

  I have Ubuntu 10.04 Studio Appliance and.  When you open the Web interface and set the host name, it takes her.  Log out and back in and it is clearly expressed.  Restart the server and the host name is localhost.localdom.

  See the attachment for the screenshots

  I found a work-around as it seems that the vShield data security apparatus has the same problem.  Article KB 2009519

  If you have made your changes, you can delete

  / opt/VMware/etc/VAMI/Flags/vami_sethost {name, network}

  If you want to disable this in your profile to build you can also set the following properties to false:

  fake

  fake

• I want to switch to a different service provider, but keep the same domain name

  original title: domain name

  I want to switch to a different service provider, but keep the same domain name.

  If you are referring to your own personal domain as "MyName at mydomain.com" email then you should be able to change the host very well.

  You need to change the e-mail servers in the DNS.
  You should be able to get support and complete itinerary on the mail, Web hosting.

• RVS4000 can it resolve local host names

  I just replaced my wrt54g with a rvs4000 on a mixed linux/windows network - one of the very useful features of the wrt54g is that to resolve host names on the local network (but with a non-Linksys firmware).

  Is it possible to implement the rvs4000 so that it resolve hostnames without having recourse to the 3rd party firmware?

  I realize there are options with static ip addresses, dnsmasq, samba, etc. - but it seems an obvious feature to be present on the router.

  Hey John,

  
  

  A large number of engineers and employees of Cisco keep an eye on this forum of the community, so suggestions or problems are noted and who knows, maybe that your suggestion will be used as a new deployment of a firmware or a product design.

• Windows 7 Microsoft TCP/IP host name resolution order

  The order of host name resolution has changed in Windows 7?

  I assumed that the Deputy order (the order of the older OS)
  1. The client checks if the name queried is its own.
  2. The client will then search a local Hosts file, a list of IP address and names stored on the local computer.
  3. Domain Name System (DNS) servers are queried.
  4. If the name is still not resolved, NetBIOS name resolution sequence is used as a backup. This order can be changed by configuring the client's NetBIOS node type.
  But, I see a difference when it comes 1 - "If the requested name is his own."
  That's what I do
  1. Tent client to connect to itself (a server that is running in the same machine)
  2. In windows 7, when I do a host entry to map the name of machines to 127.0.0.1, it connects to 127.0.0.1
  3. In windows server 2003, when I do a host entry to map the name of machines to 127.0.0.1, it always connects to machines IP (10.x.yy.z)
  Can someone explain why this is the difference?

  Hopd

  These questions are best asked on Technet

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

• Remote touch the codec using the host name - matching cache of IPv4

  Pairing for some of the features of my remote client contact is often lost/broken. It uses the DHCP protocol for codecs and uses dynamic DNS entries as 'host name' at the time of the twinning contact to the codec devices.

  While this works for pairing at first, it seems the cache keys resolved IPv4 address of the codec instead of the host name. Whenever the IP address of the codec changes, the pairing is lost.

  Am I wrong? I came to the conclusion that codecs must be treated using static IPs or DHCP reservations for Peel remote to work reliably
  Click Select codec manually..., enter the IP address or host name of the codec and tap Start matching.

  THX
  / David

  Appears this is a limitation of the Touch and/or codec, see bug CSCua05282.  The contact must use the IP address, which is why when you entered the hostname of the endpoint it solved its IP address and used it.

• filter analysis interactive by "host name contains".

  I noticed that if you use the filter 'host name contains' and then only part of the hostname "server" (full host name is serverA.zone.mycompany.net, for example), he finds not all hosts.

  It seems that the host name is the analysis of the domain name FULL in parts (serverA, area, mycompany, net) and then apply it contains filter to each of them instead in its entirety instead to add a wildcard such as server *. If I do server * as my filter setting, it works fine.

  I just wanted to check if this is expected behavior. I have validated this in 2.5TP2 and 2.0GA.

  All LI queries are queries of complete keyword where a keyword is defined as any alphanumeric hyphen, or character. As such, serverA is a keyword, but the server is not. If you are unable to create a complete query with a keyword then you should replace the operator of contains begins with or use drops (for example server *). For more information, see my request construction series here: http://sflanders.net/?s=query+building+in+log+insight&submit=Go

• ESXi host name

  Hello

  If I use this property $vm.extensiondata.summary.runtime.host

  it spits out: HostSystem-home-518 inside the my script field. (not much good for me trying to decipher what node esxi is):

  How I found this property is by analyzing the VM when indicates its location, it shows that it is only: host-518 (myesxinode.me.com)

  How can I get to spit true esxi host name which is (). or y at - it an easier way?

  Thank you!

  You can use:

  $vm. VMHost.Name