How device Orchestrator properly resolve its host name and IP address?

Similar Questions

• Q10 Q10 blackBerry WIFI - browser error - could not resolve the host name

  Hello

  I use my Q10 while overseas for the Wifi only. My SIM card is in my 9900 (thank you BB not to tell anyone that BIS no longer works and WW BB roaming is not until after people buy OS 10 devices, anyway...) but I want to use the Q10 for Skype, browsing and Email while on WIFI.

  Skype works.

  Browser gives "Could not resolve the host name" and charge no emails.

  WiFi network is good (the 9900 is connected and works, as do other devices). I reset the phone, router, etc. etc.

  All to nothing does not.

  A telephone conversation of two hours with T-Mobile (from abroad) was unnecessary and disconnected.

  All DNS data seems to be there.

  Please help.

  Thank you

  Aviv

  Hello

  Problem solved.

  I have reset the router before, nothing helps. The only way I got it work is as follows:

  (1) turn off the router and wait for the phone to 'do not see' to the network in question.

  (2) turn off Wifi on the phone (menu setting and tap on wifi)

  (3) restart router

  (4) restart the phone

  After about 10 minutes, it is finally connected.

  Thank you all,

  I would BB would have simply kept the features of the 9900 and just made more attractive to the masses, instead of making an iphone with a keyboard...

• Can I change the host name and the IP of the ESXi servers?

  For reasons, I need to change the host name and IP address of my ESXi hosts on which is located the offices of the view.

  I can change it directly? or view desktop computers will be affected by the change?

  This thread will help you

  Re: Hosts view change ESXi and Vcenter Ip addresses

  If you found my answer helpful, review the allocation of points by choosing answers useful/correct

• Angular 2 http.get () fails with "cannot resolve the host name.

  I am trying to get 2 angular (well, ionic 2 actually, but the call failure is part of the kinetic moment) to shoot some json from the web. My code works fine on iOS or Android (via Cordova), but fails on any call http.get () on 10 of BlackBerry. Initially, I had problems because I did not in the whitelist the URL I was trying to download, but after whitelisting now runs the get call, but always fails. The error message "cannot resolve the host name.

  Does anyone have an idea why angular is unable to resolve an external host name when running on BlackBerry 10?

  Never mind... my bad. I encounter this problem when running my Ionic/angular application on a simulator. For me to get always consistent on many simulators BB10 different IP addresses I've run, rather than to allow VMware Player feeding the DHCP server (because it does no reservations of IP), I run a TinyCore Linux server on the same virtual network as simulators, just so that I can use DHCP on the instance of TinyCore instead Allowing no reserves. Unfortunately, I did not complete the configuration of TinyCore properly so nothing on the virtual network becomes a valid gateway or the DNS server list to access the outside world.

  When I run my application on my Z10 physics, it works fine.

• In the Photos of El Capitan how to record a double published in a separate with its own name and the ID file file?

  In the Photos of El Capitan how to record a double published in a separate with its own name and the ID file file?

  Only by exporting - with Photos (and iPhoto and Aperture) - you can have several versions of an image by duplicating the image (control - D), but this does not create an image file separated until you export - it creates a separate edit list in the database that applies to the original when you watch or export the photos

  Photos as it were its predecessors is a non-destructive control Digital Asset Manager (DAM) which does not any changes to files in the database but built a list of validation

  LN

• How to have a different DNS host name to the host name of VICTORIES?

  How to have a different DNS host name to the host name of VICTORIES?

  You are welcome-

  Chapter 18, "Dynamic Host Configuration Protocol (DHCP).

  http://redhat.activeventure.com/9/customizationguide/ch-DHCP.html

  Chapter 7 - resolution of host name

  http://TechNet.Microsoft.com/en-us/library/bb727005.aspx

  And, again

  TechNet Windows Server Forum

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

• Workstation 8: Upload failed: Curl error: could not resolve the host name

  I have workstation 8 connected to our ESX host, it shows all the machines and allows me to connect to their end. But when I try to copy/paste/drag and drop a local virtual machine over there he said "Vmware workstation 8: Upload failed: Curl error: could not resolve the host name.

  Someone at - he fell on this or have any ideas why this would be. I think that if it does not find the host name, I could not navigate or connect to my Virtual Center.

  Hello

  Whats is your ESX host name? I would recommend using with full ESX host name during the connection. You can connect to the ESX host using the host name, but to download the VM in this topic, you will need to use FULL of ESX host of domain name when connecting.

  Please try to do it and let us know if it solves your problem.

  Thank you

  Deep

• 11.1.1.3 install, resolve the host name different machine name

  I install 11.1.1.3 on a machine that was used as a machine of Hyperion, but it has been renamed and the old copy of uninstalled, Hyperion.
  
  When I run installtool.cmd, the installer resolves the host name as the former name of the machine, not as the name of the computer is now. When I use the hostname command in a command prompt, I get the new name. Any thoughts?

  Maybe the host name has been corrected in the hosts file, if it's on windows, then check in c:\windows\system32\drivers\etc\hosts

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Adding host name and the name of tablespace in the alarm e-mail

  I'm trying to figure out how I can put the host name and the name of the table space in the e-mail alarms.

  Rule name: _DBO - use of Tablespace

  Scope of the rule: DBO_Cust_DBO_Cust_Tablespace_pct2 where nom_tablespace! like '% UNDO % '.

  Tried the following queries to run the query Condition and did not

  return scope.get("tablespace_name").get ("value")

  return scope.get("tablespace_name").get ("name")

  Do you have any suggestions on how to display the host name and the name of tablespace in the alarm email?

  

  Using scope: DBO_Tablespace

  hostname = scope.get('monitoredHost/name')

  tablespaceName = scope.get ('tablespace_name')

  Kind regards

  Brian Wheeldon

• How to take a column of duplicate names and fill a different column with the same names, excluding duplicates?

  How to take a column of duplicate names and fill a different column with the same names, excluding duplicates?

  I find easier to use this copy separate Automator Service (download Dropbox).

  To install in your numbers > Services, double-click menu just the package downloaded .workflow and if necessary give permissions in system preferences > security & privacy.

  To use, just:

  1. Select the cells in the column with duplicate names.
  2. Choose separate copy in numbers > Services menu.
  3. Click once in the upper cell where you want the deduplicated values appear.
  4. Command-v to paste.

  SG

• List of all VM network name and IP address

  I am trying to get my head around powerCLI.

  I want to create a script that will the virtual machines on a cluster of output and display their network name and IP address.

  I have this so far.

  (get - vm). %{
  $vm = $_
  echo $vm.name.
  $vm. Guest.Nics | %{
  $vminfo = $_
  echo $vminfo.NetworkName $vminfo. IP $vminfo. MacAddress
  echo '; ' n ';
  }
  } | Export-Csv C:\vm_nic_report.csv

  I'd love to be able to limit the output on the cluster baised, but I can't understand this.

  If I run it without the Export-CSV, I see the info that I need on the screen, but if I add the Export.csv, my CSV is a colum with a bunch of numbers and no real value.

  Hello, TdisalvoOrinoco-

  If you want to limit the output to virtual machines that reside in a specific cluster, you can just start the whole expression with a Get-Cluster and then direct to the Get - VM with which you start currently (or use the - rental on Get - VM parameter).  Thus, the first line would be one of:

  &{Get-VM -Location (Get-Cluster myCluster0) | %{    $thisVm = $_    ## a hashtable for holding properties to be returned    $hshNicInfo = @{}; $hshNicInfo["VMName"] = $thisVm.Name    ## for each NIC, build some info with MACAddr, IPInfo, and Network Name    $thisVm.Guest.Nics | % -Begin {$i = 0} -Process {        $oThisNicInfo = $_    ## the current NicInfo item        ## get the IP info (IPv4 and IPv6 if there, which should be available if VMware Tools are running)        $strIPInfo = ($oThisNicInfo.IpAddress | sort) -join "/"        ## add the NicInfo items to the hashtable for later use with New-Object        $hshNicInfo["Nic${i}MACAddr"] = $oThisNicInfo.MacAddress        $hshNicInfo["Nic${i}IPInfo"] = $strIPInfo        ## this does not seem to have the network name if the portgroup is on a distributed vSwitch, so changed to the line after it        #$hshNicInfo["Nic${i}NetName"] = $oThisNicInfo.NetworkName        $hshNicInfo["Nic${i}NetName"] = ($thisVm.NetworkAdapters | ?{$_.MacAddress -eq $oThisNicInfo.MacAddress}).NetworkName        $i++    } ## end foreach-object
  
      ## once the hashtable is populated for all NICs, create a new object with the info    New-Object -TypeName PSObject -Property $hshNicInfo} ## end foreach-object## sorting goodness from LucD (of course) at http://communities.vmware.com/message/1769991#1769991} | sort -Property {(Get-Member -InputObject $_ -Name "Nic*").Count} -Descending | Select VMName,Nic* | `    Export-Csv -NoTypeInformation -UseCulture C:\temp\vm_nic_report.csv
  

  This is similar to the script posted in the thread http://communities.vmware.com/message/1848022#1848022 (which post has a bit more info on the necessary sorting for good performance, but also another way to recover data, using Get - views).

  In any case, it is a little more that you might write to debut with PowerCLI, but that he gets the output you're looking?

  Message edited by mattboren on February 15, 2013: change the part that gets the name of the network, such as TdisalvoOrinoco noted that VMs on vSwitches distributed has not been populated NetworkName

• RVS4000 can it resolve local host names

  I just replaced my wrt54g with a rvs4000 on a mixed linux/windows network - one of the very useful features of the wrt54g is that to resolve host names on the local network (but with a non-Linksys firmware).

  Is it possible to implement the rvs4000 so that it resolve hostnames without having recourse to the 3rd party firmware?

  I realize there are options with static ip addresses, dnsmasq, samba, etc. - but it seems an obvious feature to be present on the router.

  Hey John,

  
  

  A large number of engineers and employees of Cisco keep an eye on this forum of the community, so suggestions or problems are noted and who knows, maybe that your suggestion will be used as a new deployment of a firmware or a product design.

• JO 6500 E70n-z keeps "forgetting" its host name.

  Greetings,

  I keep having to re-enter the hostname in my OfficeJet 6500 as he continues to go back to «new host»  I it back up when change you and I check it is correct.  But every day, it is up to «new host»  More annoying, any ideas?

  Hi there RWGFromMiss,

  I thank very you much for getting back to me. I would say at this time call your Internet provider to inform them on the issue of host name, that you are experiencing. Also, I suggest making sure that they check the router settings to make sure they are OK work with the printer. The parameters are listed below.

  Password and network name must have no space or punctuation
  If you are using WPA2 security, WPA Personal mode
  Double b/g/n wireless streaming (printer connect only to g.)
  MAC filtering should be disabled
  Firewall settings must be in there by default, settings or the value of lower security
  Multicast 'on '.
  There are the following ports not blocked:
  The incoming (UDP) ports: 137, 138, 161, 427
  Outgoing (TCP) ports: 137, 139, 427, 9100, 9220, 9500

  Have a nice day

• Photosmart HP 5510 B111a-printing of Ipads, host names and more!

  Hello

  I have 5 of these photosmart printers installation in various places around our school to allow printing of the iPad 2 that have been deployed to classrooms.

  The problem is it seems to be a way to identify the different printers on the network when printing of you ipads. When I click on print and then select a printer list shows "PHOTOSMART HP 5510 B111a [C95...

  The [C95 corresponds to the first three digits of the host name of the printer, the problem is that three out of five printers have the same first three digits and are all the same displayed as the example above and therefore gives no idea of what printer you select until you print.] Which is not very practical in a school of our size!

  I connected to the HP configuration page using the IP address and changed the host name, but it changed only on windows-based hardware.

  So my question is: is it possible to change the name of the printer to allow me to determine what printer I print from an iPad? If this isn't the case, any other solution would be great.

  Hello

  You can change the identification of the unit of the printer, following embedded Web server:

  1. Access SAP from your browser by using the IP address of the printer.
  2. Enter the network tab.
  3. Enter the network.
  4. Enter Hello.
  5. Change the Name of Service Hello , as required, the updated name will appear on any Apple device.
  6. Click apply to save the changes.

  Kind regards

  Shlomi

• Fill the CSV file with the host name and the name of data store

  Hello

  How can include the hostname in my output csv file?

  The following code adds the name of the data store but not the host name:

  import-csv hosts | % {get-vmhost-name $_.name} | Get-Datastore. SELECT name.

  Export-csv ESX - Datastore.csv - notypeinformation - useculture

  How to watch your entry CSV file?

  If it's something like

  Name

  ESX1

  ESX2

  Do it like this

  &{foreach($esx in (Get-VMHost -Name (Import-Csv host.csv -UseCulture | Select -ExpandProperty Name))){    $esx | Get-Datastore |    Select @{N="VMHost";E={$esx.Name}},Name}} | Export-Csv report.csv -NoTypeInformation -UseCulture