Join paths
I'm trying to reach two different forms by choosing object > path > join if I get a message stating that it will not work because they are invalid objects. I tried with simple shapes such as the star and the rectangle. What types of forms are valid to use the command join?
Thank you.
Fix
Tags: Illustrator
Similar Questions
-
Could someone please explain why I often get an error message when I try to join two lines? I can't reproduce the error now, but I found the message more to stackexchange:
"To register, you must select two open end points. If they are not on the same path, they can be on any text within graphics paths, and if two of them are grouped together, they must be in the same group. »
Or maybe someone could translate the message in English?
Thank you for your reply Jacob, but I always if sure I select only two anchor points.
And I got a different error message earlier, saying that the selected objects cannot be joined because they are invalid objects (transparent traces, text, graphic objects, live paint group). So, there seems to be many cases where the function works everything simply.
EDIT: I've found a workaround: when the paths cannot be joined because they have a live paint group, this group can be expanded. This closes the gaps that cannot otherwise be closed.
-
Hi-
I have this one character, that I am creating, and I can't do things. I cut a piece of the character, left bottom of the 'A' and tried to reach higher up on the character. I sort of how I would like (a little rough of course ), but whenever I try to make the compound paths or to join them if not, get them to be a path, HE hesitates or makes things to look weird.
Can someone tell me what I am doing wrong?
This is IT CS4.
Thank you.
EDITED: I'm sorry, I saw that the file was still pending, so I posted this from scratch. This time looks like it's a go .
RLIN,
There is always a mask of clipping in the latest version; It can simply be deleted.
However, there is at least an ugliness that can cause problems:
The connection to the outside to the left of the bar is incorrect: instead of a single anchor Point, there are two, and the segments cross culminating in two sharp points. Zoom and shudder.
My suggestion in post #5 opposes accidental double Anchor Points.
-
Join paths and adding a shortcut key
I have a two part question. I do a chart right now that needs a lot of paths to reach intersections, then the excess path needs to be cut. I found this tutorial that explains what I'm doing, and I'm using hi method.
http://www.krankykids.com/cheatsheets/Illustrator/joining_paths.html
First question, is there an easier way to do this without the need to move the paths in the layers window?
Second question, I can assign a shortcut key for the item selection to delete in the layers window? When I say remove selection, is that the little trash in the layers window. As described in the tutorial, there you delting sections of path in the layers window, and I thought that it could go faster, if I could have a shortcut to the trash.
Why is it important if I traced mode?
I do not know. But I can verify that. I would say that a bug.
JET
-
I am joining the paths for each region on this map and complete each of these regions. Can I join paths, but the filling is erratic. Any help would be greatly appreciated.
1125R,
The solution possible (s) will depend on your version.
The paths are not closed. In older versions, you must create a path closed for each area. In the latest versions, you can use the live paint.
-
Connecting two points on the compound path
Hi guys,.
First time posting and had a little research but could not know what I needed - forgive me if the answer is and I am looking with the wrong keywords!
I'm trying to change a font, that I turned into an object. I don't want the tail down to cross during the rest of the letter and I want also to shorten the tail, so I want to join paths, so I can modify it all as one. If you look at the pictures, I'm hoping to join them at the pink line; the second image shows the current paths.
He is currently a compound path, if that makes a difference.
Is it possible to get this happening, or is my best bet to trace it?
Thank you!
tashacarolina,
IF I (put) understand it, if you initially return a compound path, then:
(1) with the line Segment tool ClickDrag between Anchor Points where you would like the tail to be cut, then object > path > divide objects below, then a compound path output if necessary (unlikely);
Now you have a simple path;
(2) cut the ponytail where you want and remove the line to the main part.
(3) you can adjust the shape of the tip where you cut in 1), if you want to curve.
-
Output of virtual machines folder paths
Hi guys, I need for the railways of the folder names for each attached to vcenter virtual computer and output. I used the code LucD set up, which is really great, but I need to adjust something, but can't seem to understand it (with my weak skills PS).
The output that I get LucD code is as follows:
Name Data store Path VM1 datastore1 New Datacenter\folder\VM1 VM3 datastore1 New Datacenter\folder\VM3 VM2 datastore1 New Datacenter\folder\VM2 XPVM datastore1 New Datacenter\Test Folder\subfolder\XPVM The only thing I have to deal with, it's that the path does not include the name of the virtual machine in the end I'm trying to do like this:
Name Data store Path VM1 datastore1 New Datacenter\folder VM3 datastore1 New Datacenter\folder VM2 datastore1 New Datacenter\folder XPVM datastore1 New Datacenter\Test dossier\sous-record Here's the code for LucD. How can I remove the name of the virtual machine of the result?
$report = @)
Get - VM | Get-View | %{
$row = "" | Select the name, the data store, path
$row. Name = $_. Name
$row. Data store = (Get-view $_.) Datastore [0]). Summary.Name
$current = get-view $_. Parent
$path = $_. Name
{}
$parent = $current
if($parent.) Name - only "vm") {$path = $parent. {Name + "\" + $path}
$current is get-view $current. Parent
} While ($current. Parent - no $null)
$row. Path = $path
$report += $row
}
$report
One way to do that
$report = @)
Get - VM | Get-View | %{
$row = "" | Select the name, the data store, path
$row. Name = $_. Name
$row. Data store = (Get-view $_.) Datastore [0]). Summary.Name
$current = get-view $_. Parent
$path = $_. Name
{}
$parent = $current
if($parent.) Name - only "vm") {$path = $parent. {Name + "\" + $path}
$current is get-view $current. Parent
} While ($current. Parent - no $null)
$path = [string]: join ('-',($path.)) Split('\') [0.. ($path). Split('\'). (Count-2)]))
$row. Path = $path
$report += $row
}
$report
-
Combine the path, as in Illustrator
Hi all
Can someone help me,
Is it possible to combine paths in a path of the only form?
I am trying to create an icon for the user interface,
is it possible to draw traces in a single layer? while I can join paths. Currently im copy paste paths from 1 layer to another.
Its simple, I want just the same Illustrator "pathfinder"... options.
If you have merged two or more forms, in either copy and stick to each other, or selecting and merging the layers form, select the merged form and in the Options drop-down bar choose "merge elements of form".
-
Stealthily white path lines and compound
I would appreciate a quick response to this if its possible that I have to send it to print very soon!
I am trying to create a compound path to hide certain pieces and create letters, but there seems to be some kind of overlap with his leaving a white line where there shouldn't be one. Its all set up for magnetism and both forms are perfectly in line, but his leaving this white border.
The upper part of each letter is basically just 2 circles of semi, the diameter being where is the white line. I hope that the lines are still visible on the screens low resolution...
Anyone know how to get rid of this line or whether it will still be printing?
See you soon
Adam
What Scott says.
And then, you would like to do some Pathfinder unite to join paths and to simplify things.
There seems to be no reason to have these joints out there.
-
Unable to get the values of the attributes of the Annotation VM Notes and Custom (product)
Hi Experts,
Need help to enter the values of the following custom attribute annotation is my script. No problem collecting other information.
below is the codes where im having issues. There is no output for the VM Notes and the product.
@{N = "VM Notes";} E={$_. Summary.Config.Annotation}},
@{N = ' product'; E = {$key = $_.} AvailableField | where {$_.} Name - eq 'Product'} | Select the key - ExpandProperty
$_. CustomValue | where {$_.} Key - eq $key} | {{Select - ExpandProperty value}}.
Below is the script when the above code is integrated.
$vCenterServerName = "test.com"
SE connect-VIServer $vCenterServerName - xxx-xxxx password user
$SMTPServer = "xxxx".
$ToAddress = "xxxxx".
$FromAddress = $vCenterServerName + "@xxx.com.
$Subject = ' report VMPath for all VMs in vcenter - tpe.corp.kazootek.com.
$date = get-Date-format-M - d - yyyy
$reportlocation = "C:\test\vcenter-xxx-vmpath-$date.csv".
$vmFields = ' Name ',' Parent ',' Config.Template ',' Runtime.Host ',' ResourcePool ',' Config.Hardware ',' Summary.Storage ',' Runtime.Powerstate ',' Summary.Config.Annotation '.
# $report = C:\test\tpe_mate1.csv - UseCulture | %{
$report = get-View - ViewType VirtualMachine-property $vmFields | %{
$esx = get-view-id $_. Runtime.Host - name of the property, material
$_ | Select Name,
@{N = "VM Notes";} E={$_. Summary.Config.Annotation}},
@{N = ' product'; E = {$key = $_.} AvailableField | where {$_.} Name - eq 'Product'} | Select the key - ExpandProperty
$_. CustomValue | where {$_.} Key - eq $key} | {{Select - ExpandProperty value}}.
@{N = 'Template'; E={$_. Config.Template}},
@{N = 'Center'; E = {}
$obj = get-view-Id $_. ResourcePool-name of the Parent property
While ($obj - isnot [VMware.Vim.Datacenter]) {}
$obj is get-view $obj. Parent - the Parent property name
}
$obj. Name
}},
@{N = "Cluster"; E = {}
$obj = get-view-Id $_. ResourcePool-name of the Parent property
While ($obj - isnot [VMware.Vim.ClusterComputeResource]) {}
$obj is get-view $obj. Parent - the Parent property name
}
$obj. Name
}},
@{N = 'Host'; E = {$esx. Name}},
@{N = "NumCpu"; E={$_. Config.Hardware.NumCpu}},
@{N = "MemoryGB"; E = {[int]($_.)} Config.Hardware.MemoryMB/1KB)}}.
@{N = "ProvisionedSpaceGB"; E = {($_.Summary.Storage.Committed+$_.Summary.Storage.Uncommitted)/1 GB)}},
@{N = "Powerstate"; E={$_. Runtime.PowerState}},
@{N = "Path"; E = {}
$current = get-view-Id $_. Parent - the Parent property name
$path = $_. Name
{}
$parent = $current
if($parent.) Name - only "vm") {$path = $parent. {Name + "\" + $path}
$current is get-view $current. Parent - the Parent property name
} While ($current. Parent - no $null)
[channel]: join ('-',($path.)) Split('\') [0.. ($path). Split('\'). (Count-2)]))
}},
@{N = "FolderId"; E={$_. Parent.ToString ()}}.
@{N = "Manufacturer"; E = {$esx. Hardware.SystemInfo.Vendor}},
@{N = ' model'; E = {$esx. Hardware.SystemInfo.Model}},
@{N = "ProcessorType"; E = {$esx. Hardware.CpuPkg [0]. Description}}
}
# }
$report | Export-Csv $reportlocation - NoTypeInformation - UseCulture
Write-Host "Report exported to csv file" + $reportlocation
Send-Mailmessage-to $FromAddress - to $ToAddress - subject $Subject - $reportlocation - SmtpServer $SMTPServer attachments
Write-Host "report was sent by E-mail to '$ToAddress' to ' $FromAddress
You must add the $vmFields variable AvailableField and CustomValue
$vmFields = ' Name ',' Parent ',' Config.Template ',' Runtime.Host ',' ResourcePool ',' Config.Hardware ',' Summary.Storage ',.
'Runtime.Powerstate ',' Summary.Config.Annotation ',' AvailableField', ' CustomValue.
-
PSCredential showing as null?
I have a question where a PSCredential object is created, but it seems to return null for some reason any.
I have the following functions in a module:
Function GetPW ([string] $UseCase) {}
[String] $credPath = (Join-Path (split-Path $profile) ' $($UseCase) - credential ")
[PSCredential] $PSCred = «»
Write-Host "checking $credPath' n...» "
If (Test-Path $credPath) {}
Write-Host "file found in $credPath, get the password from there"
$PSCred = import-CliXml $credPath
If (-not ($PSCred)) {}
Write-Host "ERROR: password credentials not extracted from the $credPath.
Output
}
}
else {}
#$pw = Read-Host $prompt - AsSecureString
#$cred = new-object - typename System.Management.Automation.PSCredential - argumentlist 'root', $pw
$PSCred = get-Credential
#$cred = Read-Host "get pw" - AsSecureString
$PSCred | Export-CliXml $credPath
$PSCredCheck = import-CliXml $credPath
If (-not ($PSCredCheck)) {}
Write-Host "ERROR: password not saved to $credPath.
Output
}
}
return $PSCred
}
Function vCenterConnect ([string] $IP, [PSCredential] $Cred) {}
Write-Host "connecting to vCenter" - foregroundcolor "magenta".
$protocol = "https"
#Connect - VIServer - server $IP - protocol $protocol - the username-password $vCenterPassword $vCenterUsername
SE connect-VIServer-server $IP - protocol $protocol - SaveCredentials-Credential $Cred
Write-Host "Create folder" - foregroundcolor "magenta".
}
I call this first function here in vcenter_setup.ps1 (what matter the module) and try to connect to the Vcenter:
$LegacyVcenterCreds = GetPW 'legacy_vcenter '.
blankLines (4)
#Use credentials to connect to vCenter
vCenterConnect $vCenterIP $LegacyVcenterCreds
#vCenterConnect $vCenterIP (GetPW 'legacy_vcenter')
output
I run first, enter my credentials, which seem to be saved on the disk and it will connect to Vcenter fine; I see the xml file in C:\Users\ID-here\Documents\WindowsPowerShell\legacy_vcenter-credential:
PowerCLI E:\vcenter >.\vcenter_setup.ps1
< snip >
Audit C:\Users\ID-here\Documents\WindowsPowerShell\legacy_vcenter-credential
...
cmdlet Get-Credential command pipeline position 1
Provide values for the following parameters:
Identification information
Connecting to vCenter
Port of user name
---- ---- ----
VCenter-IP-here 443 DSL\ID-here
Creating the folder
I run once again, wait for the script to find the XML, import it and understand the credentials. However, it seems PowerCLI think it is empty. Any thoughts on why?
PowerCLI E:\vcenter >.\vcenter_setup.ps1
< snip >
Please enter your identification of BIAS for the log-in information to: vcenter-name-here
Audit C:\Users\ID-here\Documents\WindowsPowerShell\legacy_vcenter-credential
...
Found the file in C:\Users\ID-here\Documents\WindowsPowerShell\legacy_vcenter-creden
tial, get the password was from there
Connecting to vCenter
SE connect-VIServer: Impossible to validate the argument on the parameter "Credential." The
argument is null or empty. Provide an argument that is not null or empty and
then try the command again.
At C:\Users\ID-here\Documents\WindowsPowerShell\Modules\func_definitions\func_d
- efinitions.psm1:79 tank: 83
+... ls-Credential $Cred
+ ~~~~~
+ CategoryInfo: InvalidData: (:)) [connect-VIServer], ParameterBi)
ndingValidationException
+ FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutom
ation.ViCore.Cmdlets.Commands.ConnectVIServer
Creating the folder
PowerCLI E:\vcenter >
Here are the screenshots that show more details.
That's because I was using the wrong scope variable, for example a variable exists only within each function loop etc., as announced.
-
Could not enumerate the virtual machines that are used as models
Hey guys,.
I have a simple script that collects information from a virtual computer. Unfortunately, I'm getting a lot of mistakes, he doesn't pull out information if the virtual machine is used as a model.
$date = get-Date-format-M - d - yyyy
Import-Csv C:\test\servers_mate.csv - UseCulture | %{
Get-VM-name $_. Name |
Select Name,
@{N = 'Center'; E = {Get-Datacenter - VM $_______ |} {{Select - ExpandProperty name}}.
@{N = "Cluster"; E = {Get-Cluster - VM $_______ |} {{Select - ExpandProperty name}}.
Host, NumCpu, MemoryGB,
ProvisionedSpaceGB, Powerstate,
@{N = "Path"; E = {}
$current = get-view $_. ExtensionData.Parent
$path = $_. Name
{}
$parent = $current
if($parent.) Name - only "vm") {$path = $parent. {Name + "\" + $path}
$current is get-view $current. Parent
} While ($current. Parent - no $null)
[channel]: join ('-',($path.)) Split('\') [0.. ($path). Split('\'). (Count-2)]))
}},
FolderId,
@{N = "Manufacturer"; E = {(Get-VMHost-Name $_.)} Host). Manufacturer reference}},
@{N = ' model'; E = {(Get-VMHost-Name $_.)} Host). Model}},
@{N = "ProcessorType"; E = {(Get-VMHost-Name $_.)} Host). ProcessorType}}
} | Export-Csv "C:\test\servers-vcenter-servers-vmpath-$date.csv" - NoTypeInformation - UseCulture
the output current is like that.
Name Data Center Cluster Host NumCpu MemoryGB ProvisionedSpaceGB PowerState Folder path FolderId Manufacturer Model ProcessorType I just also want to collect the same information, even if the virtual machine is used as a model. Introduction 1 additional column is perhaps something like below. So we can clearly identify if it is a virtual machine or be used as a model? Thank you.
Name Data Center Cluster Host NumCpu MemoryGB ProvisionedSpaceGB PowerState Folder path FolderId Manufacturer Model Type of processor Virtual MACHINE or template Erros I receive.
Get - VM: get-VM VM with name 03/08/2015-12:40:44
"xxxx" was not using the specified
filter (s).
Online: 2 char: 5
+ Get-VM-name $_. Name |
+ ~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo: ObjectNotFound: (:)) [Get - VM], VimException)
+ FullyQualifiedErrorId: Core_OutputHelper_WriteNotFoundError, VMware.VimA
utomation.ViCore.Cmdlets.Commands.GetVM
Try something like this
Import-Csv C:\test\servers_mate.csv - UseCulture | %{
Notice-EEG - ViewType VirtualMachine-filter @{'Name' = $_.} Name} | %{
$esx = get-view-Id $_. Runtime.Host
$_ | Select Name,
@{N = 'Template'; E={$_. Config.Template}},
@{N = 'Center'; E = {Get-Datacenter - VM $_.} Name | {{Select - ExpandProperty name}}.
@{N = "Cluster"; E = {Get-Cluster - VM $_.} Name | {{Select - ExpandProperty name}}.
@{N = 'Host'; E = {$esx. Name}},
@{N = "NumCpu"; E={$_. Config.Hardware.NumCpu}},
@{N = "MemoryGB"; E = {[int]($_.)} Config.Hardware.MemoryMB/1KB)}}.
@{N = "ProvisionedSpaceGB"; E = {($_.Summary.Storage.Committed+$_.Summary.Storage.Uncommitted)/1 GB)}},
@{N = "Powerstate"; E={$_. Runtime.PowerState}},
@{N = "Path"; E = {}
$current = get-view-Id $_. Parent
$path = $_. Name
{}
$parent = $current
if($parent.) Name - only "vm") {$path = $parent. {Name + "\" + $path}
$current is get-view $current. Parent
} While ($current. Parent - no $null)
[channel]: join ('-',($path.)) Split('\') [0.. ($path). Split('\'). (Count-2)]))
}},
@{N = "FolderId"; E={$_. Parent.ToString ()}}.
@{N = "Manufacturer"; E = {$esx. Hardware.SystemInfo.Vendor}},
@{N = ' model'; E = {$esx. Hardware.SystemInfo.Model}},
@{N = "ProcessorType"; E = {$esx. Hardware.CpuPkg [0]. Description}}
}
}
The error you see seems to indicate that there is an entry in the CSV file for a nonexistent VM.
-
Hi guys,.
Need help pulling more information of this script, the model of the esx host and filter vm powerstate = we. That's what I currently have.
SE connect-VIServer xxxxx
$date = get-Date-format-M - d - yyyy
Import-Csv C:\test\vmlisttest.csv - UseCulture | %{
Get-VM-name $_. Name |
Select Name,
@{N = 'Center'; E = {Get-Datacenter - VM $_______ |} {{Select - ExpandProperty name}}.
@{N = "Cluster"; E = {Get-Cluster - VM $_______ |} {{Select - ExpandProperty name}}.
Host, NumCpu, MemoryGB,
ProvisionedSpaceGB, Powerstate
@{N = "Path"; E = {}
$current = get-view $_. ExtensionData.Parent
$path = $_. Name
{}
$parent = $current
if($parent.) Name - only "vm") {$path = $parent. {Name + "\" + $path}
$current is get-view $current. Parent
} While ($current. Parent - no $null)
[channel]: join ('-',($path.)) Split('\') [0.. ($path). Split('\'). (Count-2)]))
}},
FolderId
} | Export-Csv "C:\test\test-vcenter-test-vmpath-$date.csv" - NoTypeInformation - UseCulture
example of output
Name Data Center Cluster Model Host NumCpu MemoryGB ProvisionedSpaceGB Path FolderId testvm WE Server BL460c esxdev - 02.mak.esportz.com 1 2 21.00084689 US\Server\ File-group-v4603 See you soon,.
Get - vm | WHERE-object {$_.} PowerState - eq "Receptor"} | Select Name, @{N = ' model'; E = {(Get-VMHost-Name $_.)} Host). Model}}
a the basics of what you want to do I think.
Then in your code, add the where-object {$_.} PowerState - eq 'Receiving'} after Get-VM-name $_. Name: to work on only the engine on the VMs.
Then add @{N = 'Model'; E = {(Get-VMHost-Name $_.)} Host). Model}}, after @{N = "Cluster"; E = {Get-Cluster - VM $_______ |} Select name - ExpandProperty}},
-
PowerShell remoting to install VMWare tools
Greetings
It is true that it is probably focused more on PowerShell and less on VMware VMware tools is the target
I'm trying to write a script to install VMware tools remotely on the virtual machines that do not have VMware tools installed.
So far I have the below...
Import-Module VMware.VimAutomation.Cis.Core
Import-Module VMware.VimAutomation.Core
Import-Module VMware.VimAutomation.HA
Import-Module VMware.VimAutomation.Sdk
Import-Module VMware.VimAutomation.Storage
Import-Module VMware.VimAutomation.Vds
Se connect-VIServer vCenterserver.domain
$username = "domain\username"
$SecurePassword = Read-Host -Quick ' Enter * FIELD * password " -AsSecureString
$Credentials = New-Object System.Management.Automation.PSCredential '
-ArgumentList $UserName $SecurePassword
$VM = "Test01"
Get-vm $VM | Dismount-Tools
Get-vm $VM | Mount-Tools
$RMsession = New-PSSession -ComputerName $VM -Credential $Credentials
Invoke-Command -Session $RMSession -ScriptBlock { }$CDRom = Get-WmiObject -class Win32_CDROMDrive | select Drive | ForEach {$_. {{ Drive}}
{ Invoke-Command -Session $RMSession -ScriptBlock { }$Subpath = '\setup.exe s-v - SB ADDLOCAL = all THE REBOOT = R'}
{ Invoke-Command -Session $RMSession -ScriptBlock { }$ExecuteEXE = Join-Path -Path $CDRom -ChildPath $Subpath}
{ Invoke-Command -Session $RMSession -ScriptBlock { }start-process $executeEXE}
output
Remove-PSSession *
Disconnect VIServer * -confirm:$False
I confirmed that $executeEXE = indeed Z:\setup.exe s - v - SB ADDLOCAL = ALL REBOOT = R
When I run the script in the ISE, I get:
Start-Process: this command cannot be executed due to the error: the system cannot find the specified file.
Online: 1 character: 14
+ start-process < < < < $executeEXE
+ CategoryInfo: InvalidOperation: (:)) [Start-Process], InvalidOperationException)
+ FullyQualifiedErrorId: InvalidOperationException, Microsoft.PowerShell.Commands.StartProcessCommand
It is true that I am very inexperienced with PowerShell remoting.
It seems that when I run the script it seems in fact be invoking the command on the remote computer, but rather on the local computer. VMware tools are piling up and the path in $executeEXE is 100% correct and the PSSession is also open, no doubt, but not magic?
Any guidance would be greatly appreciated.
Greetings LucD
Looks like I may have found the problem.
Looking for a way run the background process, so that I can do a get-process, while he was running to show he was running, I discovered that start-process allows you to specify the - ArgumentList parameter. (windows - start a detached in PowerShell background process - Stack Overflow) (2 responses)
So, it looks like this:
Invoke-Command - Session $RMSession - ScriptBlock {"$CDRom = Get - WmiObject - class Win32_CDROMDrive | select drive"}
| ForEach {$_.} Disk}; $Subpath = '\setup.exe '; $ExecuteEXE is $CDRom join-Path-Path - ChildPath $Subpath;. start-process $executeEXE - ArgumentList's - v - SB ADDLOCAL = ALL REBOOT = R'}
To my surprise translates:
[Test01]: C:\ PS > Get-Process of installation *.
Manages the NPM PM (K) k VM (M) CPU Id ProcessName
------- ------ ----- ----- ----- ------ -- -----------
68 10 1540 5088 56 3220 0.17 setup
108 10 2324 7340 76 0.14 3504 setup64
And VMware tools installed.
Thank you very much for your time and trouble. Always very appreciated!
-
How to import the list of names of VM and opposed a script of the imported virtual machines list
Hi guys,.
Can someone help me and integrate a csv import script (which contains a list of VMS) and ran the script against the VMs imported to create a CSV output below? Thank you very much in advance.
SE connect-VIServer xxxxxxxx
$date = get-Date-format-M - d - yyyy
. 'c:\Users\xxxx\test\test2\scripts\xxx scripts\Get - FolderPath.ps1'
$folders = get-file-type vm | Get-FolderPath | Sort-Object Id
{Set-Path function
Param ($Object)
foreach ($folder IN $folders) {}
If ($folder. ID - eq $Object.Id) {}
$result = $folder. Path
breaking
}
}
$result
}
Get - VM vditest - 1.xxx.internal | Select-Object - property Name,@{N='Datacenter'; E={$_| Get-Datacenter}},@{N='Cluster'; E={$_. VMHost.Parent}},
NumCPU,MemoryGB,ProvisionedSpaceGB,@{N='Path'; E={($_. Folder | Get - FolderPath). Path}},@{N='FolderID'; E = {$_.folder.} ID}} | Export-Csv "C:\test\vm-xxx-$date.csv" - NoTypeInformation - UseCulture
Try something like below script
It assumes that your CSV file looks like this
'Name '.
"VM1.
"VM2.
The script
VM.csv Import-Csv - UseCulture | %{
Get-VM-name $_. Name |
Select Name,
@{N = 'Center'; E = {Get-Datacenter - VM $_______ |} {{Select - ExpandProperty name}}.
@{N = "Cluster"; E = {Get-Cluster - VM $_______ |} {{Select - ExpandProperty name}}.
NumCpu, MemoryGB,
ProvisionedSpaceGB,
@{N = "Path"; E = {}
$current = get-view $_. ExtensionData.Parent
$path = $_. Name
{}
$parent = $current
if($parent.) Name - only "vm") {$path = $parent. {Name + "\" + $path}
$current is get-view $current. Parent
} While ($current. Parent - no $null)
[channel]: join ('-',($path.)) Split('\') [0.. ($path). Split('\'). (Count-2)]))
}},
FolderId
}
Maybe you are looking for
-
HP Officejet Pro 8610: hp 8610 not printing images inserted into the word document
I tried everything I know to do. I have a word document that I inserted a photo in and it keeps cutting off my photos. This is also when I insert a clip art image. I downloaded new drivers and everything. I do not lose any information on my file
-
Update for Windows Vista (KB977165) _ security
This security update is offered after it has been installed permanently... I have Comcast as an ISP and use Norton which is offered by comcast for protection.I used MacAffee that gave comcast and never had this problem.I ran Fixit application and my
-
(Redirected) Inspiron 530 turns black after log in
I have an Inspiron 530. After I log in, the screen goes black, but I have a cursor on the screen. I access Safe Mode boot but have know idea what to do after that. Any ideas?
-
Problems with my cursor?
Whenever I use my cursor click to download something I have to close all the other screens that are open until I can access the download box and check run with my cursor or open otherwise the box continues to disappear if I try with other open screen
-
The serial number of the hard drive go to microsoft, I went to reintall my windows after it kept crashing, updated my hard drive, memory, ram. I think because the serial number is different on the hard drive, it will not be installed.